Pair distribution function analysis of the reassembly step of the assembly-disassembly-organisation-reassembly (ADOR) process.

An in situ pair distribution function study assessing the reassembly of three IM-12 (UTL) intermediate materials to the corresponding fully connected materials. A greater level of atomic change is observed at higher temperatures for the reassembly of the fully disconnected intermediate, IPC-1P, compared to the two partially connected intermediates of IPC-2P and IPC-6P.

Hot-melt extrudability of amorphous solid dispersions of flubendazole-copovidone: An exploratory study of the effect of drug loading and the balance of adjuvants on extrudability and dissolution.

The FDA-approved anthelmintic flubendazole has shown potential to be repositioned to treat cancer and dry macular degeneration; however, its poor water solubility limits its use. Amorphous solid dispersions may overcome this challenge, but the balance of excipients may impact the preparation method and drug release. The purpose of this study was to evaluate the influence of adjuvants and drug loading on the development of an amorphous solid dispersion of flubendazole-copovidone by hot-melt extrusion. The drug, copovidone, and adjuvants (magnesium stearate and hydroxypropyl cellulose) mixtures were statistically designed, and the process was performed in a twin-screw extruder. The study showed that flubendazole and copovidone mixtures were highly extrudable, except when drug loading was high (>40%). Furthermore, magnesium stearate positively impacted the extrusion and was more effective than hydroxypropyl cellulose. The extruded materials were evaluated by modulated differential scanning calorimetry and X-ray powder diffraction, obtaining positive amorphization and physical stability results. Pair distribution function analysis indicated the presence of drug-rich domains with medium-range order structure and no evidence of polymer-drug interaction. All extrudates presented faster dissolution (HCl, pH 1.2) than pure flubendazole, and both adjuvants had a notable influence on the dissolution rate. In conclusion, hot-melt extrusion may be a viable option to obtain stable flubendazole:copovidone amorphous dispersions.

Physicochemical data of oleic acid-poloxamer organogel for intravaginal voriconazole delivery.

Functional polymeric nanoparticles have attracted attention for different biomedical applications, including drug delivery. Poloxamers (PL), a synthetic copolymers of poly(ethyleneoxide)-b-poly(propylene oxide)-b-poly(ethylene oxide), that exhibit thermoreversible behavior in aqueous solutions. Physicochemical properties of Oleic Acid-Poloxamer (OA-PL) organogel for intravaginal controlled Voriconazole (VRC) delivery were assessed using three different oils (isopropyl myristate - IPM, isopropyl palmitate - IPP, and oleic acid - OA, in order to select the most suitable oil phase for increasing the solubility of the drug and its dispersion in the final aqueous phase. Organogel structural organization was assessed by VRC partition coefficient, differential scanning calorimetry (DSC), rheological analysis, and drug release assay. These data are complementary to the research article entitled "Sodium alginate in oil-poloxamer organogels for intravaginal drug delivery: influence on structural parameters, drug release mechanisms, cytotoxicity and in vitro antifungal activity" - Materials Science and Engineering: C, 2019. 99: p. 1350-1361.

Sodium alginate in oil-poloxamer organogels for intravaginal drug delivery: Influence on structural parameters, drug release mechanisms, cytotoxicity and in vitro antifungal activity.

Local administration of antimicrobial agents is the first therapeutic approach for the treatment of Candida albicans infections. The duration of contact of formulations with the vaginal mucosa is critical for therapeutic efficacy. This study describes the development of organogels employing an oil phase composed of oleic acid (OA) and an aqueous phase consisting of the poloxamer PL407, alone or in association with PL188, together with 0.25-1% sodium alginate (SA), in order to obtain an intravaginal drug delivery system capable of modulating the release of voriconazole (VRC). VRC was solubilized in oleic acid homogenized with the PL-SA aqueous phase, at a final concentration of 5 mg/mL. Physicochemical characterization was performed for evaluation of the influence of SA on organogel structural organization, biopharmaceutical properties, pharmacological efficacy, and cytotoxicity, envisaging use of the formulation for the treatment of vaginal candidiasis. The enthalpy variation values showed greater changes in the presence of PL188 and after the incorporation of SA or VRC in the organogels. Rheological analysis showed Tsol-gel values in the ranges 11-39 °C and 27-30 °C for the OA-PL407 and OA-PL407-188 formulations, respectively. Oscillatory analysis of OA-PL407-188 showed that G' was ~20-fold higher than G″, even after submitting the formulation to temperature variation. VRC-OA-PL407 showed fast drug release from 0.5 to 4 h, maintaining total release (~100%) up to 24 h. The incorporation of SA in the organogels enabled modulation of VRC release, with different release percentages for 0.25% SA (~75%), 0.5% SA (~55%), and 1% SA (~35%). The formulation was non-cytotoxic towards HeLa and Vero cell lines. In diffusion tests, it was able to prevent the growth of Candida albicans and Candida krusei. In conclusion, the results suggested that OA-PL407-188-SA organogels could be possible new systems for VRC delivery, with potential for use in future vaginal applications.

Design, Synthesis, Experimental and Theoretical Characterization of a New Multitarget 2-Thienyl-N-Acylhydrazone Derivative.

Pulmonary arterial hypertension (PAH) is a chronic cardiovascular disease that displays inflammatory components, which contributes to the difficulty of adequate treatment with the available therapeutic arsenal. In this context, the N-acylhydrazone derivative LASSBio-1359 was previously described as a multitarget drug candidate able to revert the events associated with the progression of PAH in animal models. However, in spite of having a dual profile as PDE4 inhibitor and adenosine A2A receptor agonist, LASSBio-1359 does not present balanced potencies in the modulation of these two targets, which difficult its therapeutic use. In this paper, we describe the design concept of LASSBio-1835, a novel structural analogue of LASSBio-1359, planned by exploiting ring bioisosterism. Using X-ray powder diffraction, calorimetric techniques, and molecular modeling, we clearly indicate the presence of a preferred synperiplanar conformation at the amide function, which is fixed by an intramolecular 1,5-N∙∙∙S σ-hole intramolecular interaction. Moreover, the evaluation of LASSBio-1835 (4) as a PDE4 inhibitor and as an A2A agonist confirms it presents a more balanced dual profile, being considered a promising prototype for the treatment of PAH.

Synthesis, X-ray diffraction study and pharmacological evaluation of 3-amino-4-methylthiophene-2-acylcarbohydrazones.

N-acylhydrazone is an interesting privileged structure that has been used in the molecular design of a myriad of bioactive compounds. In order to identify new antinociceptive drug candidates, we described herein the design, synthesis, X-ray diffraction study and the pharmacological evaluation of a series of 3-amino-4-methylthiophene-2-acylcarbohydrazone derivatives (8a-t). Compounds were prepared in good overall yields through divergent synthesis from a common key intermediate and were characterized by classical spectroscopy methods. X-ray diffraction study was employed for unequivocal determination of the imine double bond stereochemistry. 8a-t were evaluated in vivo through oral administration using the classical writhing test in mice. N-acylhydrazone derivatives 8j and 8l displayed relative potency similar to dipyrone, highlighting them as promising analgesic lead-candidates for further investigation.

Comparing two tetraalkylammonium ionic liquids. II. Phase transitions.

Phase transitions of the ionic liquids n-butyl-trimethylammonium bis(trifluoromethanesulfonyl)imide, [N1114][NTf2], and methyl-tributylammonium bis(trifluoromethanesulfonyl)imide, [N1444][NTf2], were investigated by differential scanning calorimetry (DSC), X-ray diffraction (XRD) measurements, and Raman spectroscopy. XRD and Raman spectra were obtained as a function of temperature at atmospheric pressure, and also under high pressure at room temperature using a diamond anvil cell (DAC). [N1444][NTf2] experiences glass transition at low temperature, whereas [N1114][NTf2] crystallizes or not depending on the cooling rate. Both the ionic liquids exhibit glass transition under high pressure. XRD and low-frequency Raman spectra provide a consistent physical picture of structural ordering-disordering accompanying the thermal events of crystallization, glass transition, cold crystallization, pre-melting, and melting. Raman spectra in the high-frequency range of some specific cation and anion normal modes reveal conformational changes of the molecular structures along phase transitions.

Effects of Gold Salt Speciation and Structure of Human and Bovine Serum Albumins on the Synthesis and Stability of Gold Nanostructures.

The present study aimed to investigate the influence of albumin structure and gold speciation on the synthesis of gold nanoparticles (GNPs). The strategy of synthesis was the addition of HAuCl4 solutions at different pH values (3-12) to solutions of human and bovine serum albumins (HSA and BSA) at the same corresponding pH values. Different pH values influence the GNP synthesis due to gold speciation. Besides the inherent effect of pH on the native structure of albumins, the use N-ethylmaleimide (NEM)-treated and heat-denaturated forms of HSA and BSA provided additional insights about the influence of protein structure, net charge, and thiol group approachability on the GNP synthesis. NEM treatment, heating, and the extreme values of pH promoted loss of the native albumin structure. The formation of GNPs indicated by the appearance of surface plasmon resonance (SPR) bands became detectable from 15 days of the synthesis processes that were carried out with native, NEM-treated and heat-denaturated forms of HSA and BSA, exclusively at pH 6 and 7. After 2 months of incubation, SPR band was also detected for all synthesis carried out at pH 8.0. The mean values of the hydrodynamic radius (RH) were 24 and 34 nm for GNPs synthesized with native HSA and BSA, respectively. X-ray diffraction (XRD) revealed crystallites of 13 nm. RH, XRD, and zeta potential values were consistent with GNP capping by the albumins. However, the GNPs produced with NEM-treated and heat-denaturated albumins exhibited loss of protein capping by lowering the ionic strength. This result suggests a significant contribution of non-electrostatic interactions of albumins with the GNP surface, in these conditions. The denaturation of proteins exposes hydrophobic groups to the solvent, and these groups could interact with the gold surface. In these conditions, the thiol blockage or oxidation, the latter probably favored upon heating, impaired the formation of a stable capping by thiol coordination with the gold surface. Therefore, the cysteine side chain of albumins is important for the colloidal stabilization of GNPs rather than as the reducing agent for the synthesis. Despite the presence of more reactive gold species at more acidic pH values, i.e., below 6.0, in these conditions the loss of native albumin structure impaired GNP synthesis. Alkaline pH values (9-12) combined the unfavorable conditions of denaturated protein structure with less reactive gold species. Therefore, an optimal condition for the synthesis of GNPs using serum albumins involves more reactive gold salt species combined with a reducing and negatively charged form of the protein, all favored at pH 6-7.