Small to Large Polaron Behavior Induced by Controlled Interactions in Perovskite Quantum Dot Solids.

The polaron is an essential photoexcitation that governs the unique optoelectronic properties of organic-inorganic hybrid halide perovskites, and it has been subject to extensive spectroscopic and theoretical investigation over the past decade. A crucial but underexplored question is how the nature of the photogenerated polarons is impacted by the microscopic perovskite structure and what functional properties this affects. To tackle this question, we chemically tuned the interactions between perovskite quantum dots (QDs) to rationally manipulate the polaron properties. Through a suite of time-resolved spectroscopies, we find that inter-QD interactions open an excited-state channel to form large polaron species, which exhibit enhanced spatial diffusion, slower hot polaron cooling, and a longer intrinsic lifetime. At the same time, polaronic excitons are formed in competition via localized band-edge states, exhibiting strong photoluminescence but are limited by shorter intrinsic lifetimes. This control of polaron type and function through tunable inter-QD interactions not only provides design principles for QD-based materials but also experimentally disentangles polaronic species in hybrid perovskite materials.

Room temperature valley polarization via spin selective charge transfer.

The two degenerate valleys in transition metal dichalcogenides can be used to store and process information for quantum information science and technology. A major challenge is maintaining valley polarization at room temperature where phonon-induced intervalley scattering is prominent. Here we demonstrate room temperature valley polarization in heterostructures of monolayer MoS2 and naphthylethylammine based one-dimensional chiral lead halide perovskite. By optically exciting the heterostructures with linearly polarized light close to resonance and measuring the helicity resolved photoluminescence, we obtain a degree of polarization of up to -7% and 8% in MoS2/right-handed (R-(+)-) and left-handed (S-(-)-) 1-(1-naphthyl)ethylammonium lead iodide perovskite, respectively. We attribute this to spin selective charge transfer from MoS2 to the chiral perovskites, where the perovskites act as a spin filter due to their chiral nature. Our study provides a simple, yet robust route to obtain room temperature valley polarization, paving the way for practical valleytronics devices.

Enhancing Crystallization in Hybrid Perovskite Solar Cells Using Thermally Conductive 2D Boron Nitride Nanosheet Additive.

Controlling crystallization and grain growth is crucial for realizing highly efficient hybrid perovskite solar cells (PSCs). In this work, enhanced PSC photovoltaic performance and stability by accelerating perovskite crystallization and grain growth via 2D hexagonal boron nitride (hBN) nanosheet additives incorporated into the active perovskite layer are demonstrated. In situ X-ray scattering and infrared thermal imaging during the perovskite annealing process revealed the highly thermally conductive hBN nanosheets promoted the phase conversion and grain growth in the perovskite layer by facilitating a more rapid and spatially uniform temperature rise within the perovskite film. Complementary structural, physicochemical, and electrical characterizations further showed that the hBN nanosheets formed a physical barrier at the perovskite grain boundaries and the interfaces with charge transport layers, passivating defects, and retarding ion migration. As a result, the power conversion efficiency of the PSC is improved from 17.4% to 19.8%, along with enhanced device stability, retaining ≈90% of the initial efficiency even after 500 h ambient air storage. The results not only highlight 2D hBN as an effective additive for PSCs but also suggest enhanced thermal transport as one of the pathways for improved PSC performance by 2D material additives in general.

Investigation of the photoluminescent properties, scintillation behaviour and toxicological profile of various magnesium tungstate nanoscale motifs.

We have synthesized several morphologies and crystal structures of MgWO4 using a one-pot hydrothermal method, producing not only monoclinic stars and large nanoparticles but also triclinic wool balls and sub-10 nm nanoparticles. Herein we describe the importance of reaction parameters in demonstrating morphology control of as-prepared MgWO4. Moreover, we correlate structure and composition with the resulting photoluminescence and radioluminescence properties. Specifically, triclinic-phase samples yielded a photoluminescence emission of 421 nm, whereas monoclinic-phase materials gave rise to an emission maximum of 515 nm. The corresponding radioluminescence data were characterized by a broad emission peak, located at 500 nm for all samples. Annealing the wool balls and sub-10 nm particles to transform the crystal structure from a triclinic to a monoclinic phase yielded a radioluminescence (RL) emission signal that was two orders of magnitude greater than that of their unannealed counterparts. Finally, to confirm the practical utility of these materials for biomedical applications, a series of sub-10 nm particles, including as-prepared and annealed samples, were functionalized with biocompatible PEG molecules, and subsequently were found to be readily taken up by various cell lines as well as primary cultured hippocampal neurons with low levels of toxicity, thereby highlighting for the first time the potential of this particular class of metal oxides as viable and readily generated platforms for a range of biomedical applications.

Structural distortion and electron redistribution in dual-emitting gold nanoclusters.

Deciphering the complicated excited-state process is critical for the development of luminescent materials with controllable emissions in different applications. Here we report the emergence of a photo-induced structural distortion accompanied by an electron redistribution in a series of gold nanoclusters. Such unexpected slow process of excited-state transformation results in near-infrared dual emission with extended photoluminescent lifetime. We demonstrate that this dual emission exhibits highly sensitive and ratiometric response to solvent polarity, viscosity, temperature and pressure. Thus, a versatile luminescent nano-sensor for multiple environmental parameters is developed based on this strategy. Furthermore, we fully unravel the atomic-scale structural origin of this unexpected excited-state transformation, and demonstrate control over the transition dynamics by tailoring the bi-tetrahedral core structures of gold nanoclusters. Overall, this work provides a substantial advance in the excited-state physical chemistry of luminescent nanoclusters and a general strategy for the rational design of next-generation nano-probes, sensors and switches.

Critical Role of Organic Spacers for Bright 2D Layered Perovskites Light-Emitting Diodes.

Light-emitting diodes (LEDs) made with quasi-2D/3D and layered perovskites have undergone an unprecedented surge as their external quantum efficiency (EQE) is rapidly approaching other lighting technologies. Manipulating the charge recombination pathway in semiconductors is highly desirable for improving the device performance. This study reports high-performance layered perovskites LEDs with benzyl ring as spacer where radiative recombination lifetime is longer, compared with much shorter alkyl chain spacer yields. Based on detailed optical and X-ray absorption spectroscopy measurements, direct signature of charges localization is observed near the band edge in exchange with the shallow traps in benzyl organics containing layered perovskites. As a result, it boosts the photoluminescence intensity by 7.4 times compared to that made with the alkyl organics. As a demonstration, a bright LED made with the benzyl organics with current efficiency of 23.46 ± 1.52 cd A-1 is shown when the device emits at a high brightness of 6.6 ± 0.93 × 104 cd m-2. The average EQE is 9.2% ± 1.43%, two orders of magnitude higher than the device made with alkyl organics. The study suggests that the choices of organic spacers provide a path toward the manipulation of charge recombination, essential for efficient optoelectronic device fabrications.

Blending Ionic and Coordinate Bonds in Hybrid Semiconductor Materials: A General Approach toward Robust and Solution-Processable Covalent/Coordinate Network Structures.

Inorganic semiconductor materials are best known for their superior physical properties, as well as their structural rigidity and stability. However, the poor solubility and solution-processability of these covalently bonded network structures has long been a serious drawback that limits their use in many important applications. Here, we present a unique and general approach to synthesize robust, solution-processable, and highly luminescent hybrid materials built on periodic and infinite inorganic modules. Structure analysis confirms that all compounds are composed of one-dimensional anionic chains of copper iodide (CumIm+22-) coordinated to cationic organic ligands via Cu-N bonds. The choice of ligands plays an important role in the coordination mode (µ1-MC or µ2-DC) and Cu-N bond strength. Greatly suppressed nonradiative decay is achieved for the µ2-DC structures. Record high quantum yields of 85% (λex = 360 nm) and 76% (λex = 450 nm) are obtained for an orange-emitting 1D-Cu4I6(L6). Temperature dependent PL measurements suggest that both phosphorescence and thermally activated delayed fluorescence contribute to the emission of these 1D-AIO compounds, and that the extent of nonradiative decay of the µ2-DC structures is much less than that of the µ1-DC structures. More significantly, all compounds are remarkably soluble in polar aprotic solvents, distinctly different from previously reported CuI based hybrid materials made of charge-neutral CumXm (X = Cl, Br, I), which are totally insoluble in all common solvents. The greatly enhanced solubility is a result of incorporation of ionic bonds into extended covalent/coordinate network structures, making it possible to fabricate large scale thin films by solution processes.

Nanocomposite liposomes for pH-controlled porphyrin release into human prostate cancer cells.

It is both challenging and desirable to have drug sensitizers released at acidic tumor pH for photodynamic therapy in cancer treatment. A pH-responsive carrier was prepared, in which fumed silica-attached 5,10,15,20-tetrakis(4-trimethylammoniophenyl)porphyrin (TTMAPP) was encapsulated into 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) nanocomposite liposomes. The sizes of agglomerates were determined by dynamic light scattering to be 115 nm for silica and 295 nm for silica-TTMAPP-DOPC liposomes. Morphological changes were also found in TEM images, showing liposome formation at pH 8.5 but collapse upon silanol protonation. TTMAPP release is enhanced from 13% at pH 7.5 to 80% at pH 2.3, as determined spectrophotometrically through dialysis membranes. Fluorescence emission of TTMAPP encapsulated in the dry film of liposomes was reduced to half at pH 8.6 when compared to that at pH 5.4, while the production of singlet oxygen was quintupled at pH 5.0 compared to pH 7.6. Upon treatment of human prostate cancer cells with liposomes containing 6.7 µM, 13 µM, 17 µM and 20 µM TTMAPP, the cell viabilities were determined to be 60%, 18%, 20% and 5% at pH 5.4; 58%, 30%, 25% and 10% at pH 6.3; and 90%, 82%, 68% and 35% at pH 7.4, respectively. Light-induced apoptosis in cancerous cells was only observed in the presence of liposomes at pH 6.3 and pH 5.4 but not at pH 7.4, as indicated by chromatin condensation.

Polarized Single-Particle Quantum Dot Emitters through Programmable Cluster Assembly.

Although fluorescence and lifetimes of nanoscale emitters can be manipulated by plasmonic materials, it is harder to control polarization due to strict requirements on emitter environments. An ability to engineer 3D nanoarchitectures with nanoscale precision is needed for controlled polarization of nanoscale emitters. Here, we show that prescribed 3D heterocluster architectures with polarized emission can be successfully assembled from nanoscale fluorescent emitters and metallic nanoparticles using DNA-based self-assembly methods. An octahedral DNA origami frame serves as a programmable scaffold for heterogeneous nanoparticle assembly into prescribed clusters. Internal space and external connections of the frames are programmed to coordinate spherical quantum dots (QDs) and gold nanoparticles (AuNPs) into heterocluster architectures through site-specific DNA encodings. We demonstrate and characterize assembly of these architectures using in situ and ex situ structural methods. These cluster nanodevices exhibit polarized light emission with a plasmon-induced dipole along the QD-AuNP nanocluster axis, as observed by single-cluster optical probing. Moreover, emittance properties can be tuned via cluster design. Through a systematic study, we analyzed and established the correlation between cluster architecture, cluster orientation, and polarized emission at a single-emitter level. Excellent correspondence between the optical behavior of these clusters and theoretical predictions was observed. This approach provides the basis for rational creation of single-emitter 3D nanodevices with controllable polarization output using a highly customizable DNA assembly platform.

Synthesis, Characterization, and Stability Studies of Ge-Based Perovskites of Controllable Mixed Cation Composition, Produced with an Ambient Surfactant-Free Approach.

In this report, we have applied a facile, ligand-free, ambient synthesis protocol toward the fabrication of not only a series of lead-free Ge-based perovskites with the general formulation of MA1-x FA x GeI3 (where x was changed from 0, 0.25, 0.5, 0.75, to 1) but also CsGeI3. Specifically, our methodology for producing ABX3 systems is generalizable, regardless of the identity of either the A site cation or the X site halide ion. Moreover, it incorporates many advantages, including (i) the possibility of efficiently generating pure Ge-based perovskite particles of any desired chemical composition, (ii) the use of readily available, commercial precursors and comparatively lower toxicity solvents, (iii) the practicality of scale up, and (iv) the elimination of the need for any superfluous organic surface ligands or surfactants. In addition to providing mechanistic insights into their formation, we have examined the chemical composition, crystallite size, morphology, surface attributes, oxidation states, and optical properties of our as-prepared perovskites using a combination of diffraction, microscopy, and spectroscopy techniques. Specifically, we noted that the optical band gap could be reliably tuned as a function of chemical composition, via the identity of the A site cation. Moreover, we have probed their stability, not only under standard storage conditions but also, for the first time, when subjected to both e-beam- and X-ray-induced degradation, using cumulative data from sources such as synchrotron-based scanning hard X-ray microscopy. Importantly, of relevance for the potential practical incorporation of these Pb-free perovskites, our work has emphasized the possibility of controlling the chemical composition within Ge-based perovskites as a means of rationally tuning their observed band gaps and optical behavior.

Nanoscale Photoinduced Charge Transfer with Individual Quantum Dots: Tunability through Synthesis, Interface Design, and Interaction with Charge Traps.

Semiconducting colloidal quantum dots (QDs) provide an excellent platform for nanoscale charge-transfer studies. Because of their size-dependent optoelectronic properties, which can be tuned via chemical synthesis and of their versatility in surface ligand exchange, QDs can be coupled with various types of acceptors to create hybrids with controlled type (electron or hole), direction, and rate of charge flow, depending on the foreseen application, either solar harvesting, light emitting, or biosensing. This perspective highlights several examples of QD-based hybrids with controllable (tunable) rate of charge transfer obtained by various approaches, including by changing the QD core size and shell thickness by colloidal synthesis, by the insertion of molecular linkers or dielectric spacers between donor and acceptor components. We also show that subjecting QDs to external factors such as electric fields and alternate optical excitation energy is another approach to bias the internal charge transfer between charges photogenerated in the QD core and QD's surface charge traps. The perspective also provides the reader with various examples of how single nanoparticle spectroscopic studies can help in understanding and quantifying nanoscale charge transfer with QDs.

Layer-Dependent Photoinduced Electron Transfer in 0D-2D Lead Sulfide/Cadmium Sulfide-Layered Molybdenum Disulfide Hybrids.

We demonstrate layer-dependent electron transfer between core/shell PbS/CdS quantum dots (QDs) and layered MoS2 via energy band gap engineering of both the donor (QDs) and the acceptor (MoS2) components. We do this by (i) changing the size of the QD or (ii) by changing the number of layers of MoS2, and each of these approaches alters the band gap and/or the donor-acceptor separation distance, thus providing a means of tuning the charge-transfer rate. We find the charge-transfer rate to be maximal for QDs of smallest size and for QDs combined with a 5-layer MoS2 or thicker. We model this layer-dependent charge-transfer rate with a theoretical model derived from Marcus theory previously applied to nonadiabatic electron transfer in weakly coupled systems by considering the QD transferring photogenerated electrons to noninteracting monolayers within a few layers of MoS2.

Highly efficient and very robust blue-excitable yellow phosphors built on multiple-stranded one-dimensional inorganic-organic hybrid chains.

Inorganic-organic hybrid semiconductors are promising candidates for energy-related applications. Here, we have developed a unique class of multiple-stranded one-dimensional (1D) structures as very robust and efficient lighting phosphors. Following a systematic ligand design strategy, these structures are constructed by forming multiple coordination bonds between adjacent copper iodide inorganic building units Cu m I m (m = 2, 4, 6) (e.g. dimer, tetramer and hexamer clusters) and strong-binding bidentate organic ligands with low LUMO energies which give rise to infinite 1D chains of high stability and low bandgaps. The significantly enhanced thermal/photostability of these multiple-stranded chain structures is largely attributed to the multi-dentate nature and enhanced Cu-N bonding, and their excellent blue excitability is a result of using benzotriazole based ligands with low-lying LUMO energies. These facts are confirmed by Density Functional Theory (DFT) calculations. The luminescence mechanism of these compounds is studied by temperature dependent photoluminescence experiments. High internal quantum yields (IQYs) are achieved under blue excitation, marking the highest value reported so far for crystalline inorganic-organic hybrid yellow phosphors. Excellent thermal- and photo-stability, coupled with high luminescence efficiency, make this class of materials promising candidates for use as rare-earth element (REE) free phosphors in energy efficient general lighting devices.

Top-down fabrication of high-uniformity nanodiamonds by self-assembled block copolymer masks.

Nanodiamonds hosting colour centres are a promising material platform for various quantum technologies. The fabrication of non-aggregated and uniformly-sized nanodiamonds with systematic integration of single quantum emitters has so far been lacking. Here, we present a top-down fabrication method to produce 30.0 ± 5.4 nm uniformly-sized single-crystal nanodiamonds by block copolymer self-assembled nanomask patterning together with directional and isotropic reactive ion etching. We show detected emission from bright single nitrogen vacancy centres hosted in the fabricated nanodiamonds. The lithographically precise patterning of large areas of diamond by self-assembled masks and their release into uniformly sized nanodiamonds open up new possibilities for quantum information processing and sensing.

A Mono-cuboctahedral Series of Gold Nanoclusters: Photoluminescence Origin, Large Enhancement, Wide Tunability, and Structure-Property Correlation.

The origin of the near-infrared photoluminescence (PL) from thiolate-protected gold nanoclusters (Au NCs, <2 nm) has long been controversial, and the exact mechanism for the enhancement of quantum yield (QY) in many works remains elusive. Meanwhile, based upon the sole steady-state PL analysis, it is still a major challenge for researchers to map out a definitive relationship between the atomic structure and the PL property and understand how the Au(0) kernel and Au(I)-S surface contribute to the PL of Au NCs. Herein, we provide a paradigm study to address the above critical issues. By using a correlated series of "mono-cuboctahedral kernel" Au NCs and combined analyses of steady-state, temperature-dependence, femtosecond transient absorption, and Stark spectroscopy measurements, we have explicitly mapped out a kernel-origin mechanism and clearly elucidate the surface-structure effect, which establishes a definitive atomic-level structure-emission relationship. A ∼100-fold enhancement of QY is realized via suppression of two effects: (i) the ultrafast kernel relaxation and (ii) the surface vibrations. The new insights into the PL origin, QY enhancement, wavelength tunability, and structure-property relationship constitute a major step toward the fundamental understanding and structural-tailoring-based modulation and enhancement of PL from Au NCs.

Resonance Energy Transfer in a Genetically Engineered Polypeptide Results in Unanticipated Fluorescence Intensity.

The fluorescence intensity of a C-terminal acceptor chromophore, N-(7-dimethylamino-4-methyl coumarin (DACM), increased proportionally with 280 nm irradiation of an increasing number of donor tryptophan residues located on a ß-sheet forming polypeptide. The fluorescence intensity of the acceptor chromophore increased even as the length of the ß-sheet edge approached 256 Å, well beyond the Förster radius for the tryptophan-acceptor chromophore pair. The folding of the peptides under investigation was verified by circular dichroism (CD) and deep UV resonance Raman experiments. Control experiments showed that the enhancement of DACM fluorescence occurred concomitantly with peptide folding. In other control experiments, the DACM fluorescence intensity of the solutions of tryptophan and DACM did not show any enhancement of DACM fluorescence with increasing tryptophan concentrations. Formation of fibrillar aggregates of the substrate peptides prepared for the fluorescence studies was undetectable by thioflavin T (ThT) fluorescence.

Hot excitons are responsible for increasing photoluminescence blinking activity in single lead sulfide/cadmium sulfide nanocrystals.

The kinetics of photoluminescence blinking for isolated PbS/CdS nanocrystals changes with the photon excitation energy, with PL blinking increasing in frequency and changing from a two-state to a multistate on/off switching when the excitation energy changes from 1Sh-1Se (≈1.4 eV) to 1Ph-1Pe (≈2.4 eV). This increase in PL blinking activity with increased photon excitation energy is reasoned in terms of the formation of hot excitons leading to emission from both the band edge state and defect states, with defect states connected to traps that are otherwise inaccessible following low photon energy excitation at the band edge.

Electron transfer dynamics from single near infrared emitting lead sulfide-cadmium sulfide nanocrystals to titanium dioxide.

In this study we report the first successful demonstration of electron transfer between single near infrared emitting PbS/CdS nanocrystals and an external acceptor, titanium dioxide (TiO2). We demonstrate distance-dependent electron transfer from single nanocrystals to TiO2 and explore the effect of this process on the photoluminescence dynamics of these nanocrystals. Isolated PbS/CdS QDs are found to exhibit blinking dynamics similar to other nanocrystals like CdSe/ZnS; however, their photoluminescence follows a quasi two-state pattern with heterogeneous photoluminescence lifetimes which may be the result of their emission originating from different energy states. Electron transfer of these nanocrystals with an external acceptor inhibits their photoluminescence lifetime heterogeneity and biases their blinking dynamics in a manner similar to that observed for visible emitting CdSe/ZnS nanocrystals undergoing electron transfer with external acceptors. While the present study reconfirms the universality of quantum dot blinking among various types of nanocrystals, it also demonstrates that universality remains valid for the communication of various types of nanocrystals with the exterior world, here pictured as electron transfer with external acceptors.

Evolution of Excited-State Dynamics in Periodic Au28, Au36, Au44, and Au52 Nanoclusters.

Understanding the correlation between the atomic structure and optical properties of gold nanoclusters is essential for exploration of their functionalities and applications involving light harvesting and electron transfer. We report the femto-nanosecond excited state dynamics of a periodic series of face-centered cubic (FCC) gold nanoclusters (including Au28, Au36, Au44, and Au52), which exhibit a set of unique features compared with other similar sized clusters. Molecular-like ultrafast Sn → S1 internal conversions (i.e., radiationless electronic transitions) are observed in the relaxation dynamics of FCC periodic series. Excited-state dynamics with near-HOMO-LUMO gap excitation lacks ultrafast decay component, and only the structural relaxation dominates in the dynamical process, which proves the absence of core-shell relaxation. Interestingly, both the relaxation of the hot carriers and the band-edge carrier recombination become slower as the size increases. The evolution in excited-state properties of this FCC series offers new insight into the structure-dependent properties of metal nanoclusters, which will benefit their optical energy harvesting and photocatalytic applications.

Synthesis-driven, structure-dependent optical behavior in phase-tunable NaYF4:Yb,Er-based motifs and associated heterostructures.

Understanding the key parameters necessary for generating uniform Er,Yb co-activated NaYF4 possessing various selected phases (i.e. cubic or hexagonal) represents an important chemical strategy towards tailoring optical behavior in these systems. Herein, we report on a straightforward hydrothermal synthesis in which the separate effects of reaction temperature, reaction time, and precursor stoichiometry in the absence of any surfactant were independently investigated. Interestingly, the presence and the concentration of NH4OH appear to be the most critical determinants of the phase and morphology. For example, with NH4OH as an additive, we have observed the formation of novel hierarchical nanowire bundles which possess overall lengths of ∼5 µm and widths of ∼1.5 µm but are composed of constituent component sub-units of long, ultrathin (∼5 nm) nanowires. These motifs have yet to be reported as distinctive morphological manifestations of fluoride materials. The optical properties of as-generated structures have also been carefully analyzed. Specifically, we have observed tunable, structure-dependent energy transfer behavior associated with the formation of a unique class of NaYF4-CdSe quantum dot (QD) heterostructures, incorporating zero-dimensional (0D), one-dimensional (1D), and three-dimensional (3D) NaYF4 structures. Our results have demonstrated the key roles of the intrinsic morphology-specific physical surface area and porosity as factors in governing the resulting opto-electronic behavior. Specifically, the trend in energy transfer efficiency correlates well with the corresponding QD loading within these heterostructures, thereby implying that the efficiency of FRET appears to be directly affected by the amount of QDs immobilized onto the external surfaces of the underlying fluoride host materials.