Characterization of high pressure jet-induced fat-protein complexation.

High-pressure-jet (HPJ) processing of various dairy systems has been shown to disrupt fat droplets and casein micelles and cause a strong association between fat and casein proteins. The present work seeks to better describe this association between fat and casein using a model milk formulated from confectionary coating fat (3.6% wt/wt), micellar casein (3.4% wt/wt), and water (93% wt/wt), which was then pasteurized, homogenized, and then either HPJ-treated (400 MPa) or not (non-HPJ-treated, control). Upon ultracentrifugation, fat in the non-HPJ-treated model milk creamed due to its low density. In the HPJ-treated model milk, fat precipitated with protein into a thick bottom layer upon ultracentrifugation, reflecting a strong association between protein and fat. Differential scanning calorimetry (DSC) and time-domain nuclear magnetic resonance of the non-HPJ-treated model milk revealed fat in 2 physical states: (1) fat that is physically similar to the bulk fat and (2) fat that was in smaller droplets (i.e., homogenized) and crystallized at a lower temperature than the bulk fat. In contrast, DSC of HPJ-treated model milks supported the presence of fat in 3 states: (1) fat that is physically similar to the bulk fat, (2) fat in small droplets that required substantial supercooling beyond the non-HPJ-treated model milk to crystallize, and (3) fat in such small domains that it crystallizes in a less stable polymorphic form than the non-HPJ-treated model milk (or does not crystallize at all). The state of fat within the HPJ-treated model milk changed minimally with acidification, indicating that the association is not dependent on the charge on the casein. Cryogenic transmission electron microscopy (Cryo-TEM) of the non-HPJ-treated model milk revealed uniform casein micelles, which likely adsorbed to the surface of fat globules post-homogenization. In contrast, Cryo-TEM of the HPJ-treated model milk revealed a porous protein aggregate that likely had dispersed fat throughout. Together, these results suggest that HPJ treatment causes fat to be entrapped by casein proteins in very small domains.

The effect of high-pressure jet processing on cocoa stability in chocolate milk.

Fat-free chocolate milk formulations containing skim milk, cocoa powder, and sugar were thermally treated and then processed using high-pressure jet (HPJ) technology from 125 to 500 MPa. The rheological properties and stability of HPJ-treated chocolate milks were compared with controls (no HPJ processing) prepared both with and without added κ-carrageenan. As expected, carrageenan-free chocolate milk exhibited immediate phase separation of the cocoa powder, whereas formulations containing κ-carrageenan were stable for 14 d. An increased stability was observed with increasing HPJ processing pressure, with a maximum observed when chocolate milk was processed at 500 MPa. The apparent viscosity at 50 s-1 of HPJ-processed samples increased from ~3 mPa·s to ~9 mPa·s with increasing pressure, and shear-thinning behavior (n < 0.9) was observed for samples processed at HPJ pressures ≥250 MPa. We suggest that HPJ-induced structural changes in casein micelles and new casein-cocoa interactions increased cocoa stability in the chocolate milk. Because casein seemed to be the major component enhancing cocoa stability in HPJ-treated samples, a second study was conducted to determine the effect of additional micellar casein (1, 2, or 4%) and HPJ processing (0-500 MPa) on the stability of fat-free chocolate milk. Formulations with 4% micellar casein processed at 375 and 500 MPa showed no phase separation over a 14-d storage period at 4°C. The addition of micellar casein together with HPJ processing at 500 MPa resulted in a higher apparent viscosity (~17 mPa·s at 50s-1) and more pronounced shear-thinning behavior (n ≤ 0.81) compared with that without added micellar casein. The use of HPJ technology to improve the dispersion stability of cocoa provides the industry with a processing alternative to produce clean-label, yet stable, chocolate milk.

Freezing kinetics and microstructure of ice cream from high-pressure-jet processing of ice cream mix.

The effect of high-pressure-jet (HPJ) processing (0-500 MPa) on low-fat (6% fat) ice cream was studied by evaluating physiochemical properties before freezing, during dynamic freezing, and after hardening. An HPJ treatment ≥400 MPa decreased the density, increased the apparent size of colloidal particles, and altered rheological behavior (increased non-Newtonian behavior and consistency coefficients) of low-fat ice cream mix before freezing. During dynamic freezing, the particle size and consistency coefficient decreased but remained higher in 400 MPa-treated samples vs. non-HPJ-treated controls at the conclusion of freezing. The resulting ice creams (400 and 500 MPa-treated) had similar hardness values (3,372 ± 25 and 3,825 ± 14 g) and increased melting rates (2.91 ± 0.13 and 2.61 ± 0.31 g/min) compared with a control sample containing polysorbate 80 (3,887 ± 2 and 1.62 ± 0.25 g/min). Visualization of ice cream samples using transmission electron microscopy provided evidence of casein micelle and fat droplet disruption by HPJ treatment ≥400 MPa. In the 400 MPa-treated samples, a unique microstructure consisting of dispersed protein congregated around coalesced fat globules likely contributed to the altered physiochemical properties of this ice cream. High-pressure-jet processing can alter the microstructure, rheological properties, and hardness of a low-fat ice cream, and further modification of the formulation and processing parameters may allow the development of products with enhanced properties.

Fat emulsion composition alters intake and the effects of baclofen.

Thickened oil-in-water emulsions are useful model foods in rat studies due to their high acceptance and similarity to foods consumed by humans. Previous work from this laboratory used oil-in-water emulsions thickened with a biopolymer blend containing starch. Intake and effects of baclofen, a GABA-B agonist that decreases fat intake and drug self-administration, were reported, but the contribution of starch was not assessed. In the present study, intake and effects of baclofen were assessed in rats using emulsions prepared with two fat types (32% vegetable shortening, 32% corn oil) and thickened with three biopolymer blends. One biopolymer blend contained starch and the other two did not. Daily 1-h intake of the vegetable shortening emulsion containing starch was significantly greater than the other emulsions. When starch was added to the emulsions originally containing no starch, intake significantly increased. Baclofen generally reduced intake of all emulsions regardless of starch content and stimulated intake of chow. However, effects were more often significant for vegetable shortening emulsions. This report: (1) demonstrates that products used to prepare thickened oil-in-water emulsions have significant effects on rat ingestive behavior, and (2) confirms the ability of baclofen to reduce consumption of fatty foods, while simultaneously stimulating intake of chow.

A simple method of supplementation of omega-3 polyunsaturated fatty acids: use of fortified yogurt in healthy volunteers.

BACKGROUND: A relative dietary ω-3 fatty acid deficiency exists in Western diets, and this deficiency may be associated with some chronic diseases. The aim of the present study was to supplement yogurt with docosahexaenoic acid and assess whether this fatty acid could be incorporated into plasma lipids. METHODS: We developed a stable emulsion of docosahexaenoic acid that was incorporated into yogurt. Twelve healthy volunteers agreed to consume 1 serving daily that contained 600 mg of docosahexaenoic acid. RESULTS: After 3 weeks of supplementation, plasma phospholipid docosahexaenoic acid content increased significantly, by 32%, in parallel with a 16% rise in total ω-3 fatty acids. This result was associated with a significant 7% decline in phospholipid arachidonic acid. CONCLUSIONS: Fortification of ordinary foods with docosahexaenoic acid is a potentially attractive method of increasing ω-3 fatty acid content of plasma lipids, and might even lower arachidonic acid concentrations.

Effect of pH and ionic strength on the physicochemical properties of coconut milk emulsions.

Coconut milk (16% to 17% fat, 1.8% to 2% protein) was extracted from coconut (Cocos nucifera L.) endosperm and diluted in buffer to produce natural oil-in-water emulsions (10 wt% oil). The effect of pH (3 to 7) and NaCl (0 to 200 mM) on the properties and stability, namely, mean particle size, zeta-potential, viscosity, microstructure, and creaming stability, of the natural coconut milk emulsions was investigated. At pH values close to the isoelectric point (IEP) of the coconut proteins (pH 3.5 to 4) and in the absence of NaCl, coconut milk flocculated, but did not coalesce. Flocculation corresponded to low surface charges and was accompanied by an increase in emulsion viscosity. Adding up to 200 mM NaCl to those flocculated emulsions did not change the apparent degree of flocculation. Coconut milk emulsion at pH 6 was negatively charged and not flocculated. Upon addition of salt, the zeta-potential decreased from -16 to -6 mV (at 200 mM NaCl) but this was not sufficient to induce flocculation in coconut milk emulsions. At low pH (< IEP), the positively charged droplets of coconut milk emulsions only flocculated when the NaCI concentration exceeded 50 mM, as the zeta-potential approached zero.