Amphiphilic Chlorin-ß-cyclodextrin Conjugates in Photo-Triggered Drug Delivery: The Role of Aggregation.

Conjugates of chlorins with ß-cyclodextrin connected either directly or via a flexible linker were prepared. In aqueous medium these amphiphilic conjugates were photostable, produced singlet oxygen at a rate similar to clinically used temoporfin and formed irregular nanoparticles via aggregation. Successful loading with the chemotherapeutic drug tamoxifen was evidenced in solution by the UV-Vis spectral changes and dynamic light scattering profiles. Incubation of MCF-7 cells with the conjugates revealed intense spotted intracellular fluorescence suggestive of accumulation in endosome/lysosome compartments, and no dark toxicity. Incubation with the tamoxifen-loaded conjugates revealed also practically no dark toxicity. Irradiation of cells incubated with empty conjugates at 640 nm and 4.18 J/cm2 light fluence caused >50 % cell viability reduction. Irradiation following incubation with tamoxifen-loaded conjugates resulted in even higher toxicity (74 %) indicating that the produced reactive oxygen species had triggered tamoxifen release in a photochemical internalization (PCI) mechanism. The chlorin-ß-cyclodextrin conjugates displayed less-lasting effects with time, compared to the corresponding porphyrin-ß-cyclodextrin conjugates, possibly due to lower tamoxifen loading of their aggregates and/or their less effective lodging in the cell compartments' membranes. The results suggest that further to favorable photophysical properties, other parameters are important for the in vitro effectiveness of the photodynamic systems.

Antimicrobial Potency of Fmoc-Phe-Phe Dipeptide Hydrogels with Encapsulated Porphyrin Chromophores Is a Promising Alternative in Antimicrobial Resistance.

Antimicrobial resistance (AMR) poses a significant global health risk as a consequence of misuse of antibiotics. Owing to the increasing antimicrobial resistance, it became imperative to develop novel molecules and materials with antimicrobial properties. Porphyrins and metalloporphyrins are compounds which present antimicrobial properties especially after irradiation. As a consequence, porphyrinoids have recently been utilized as antimicrobial agents in antimicrobial photodynamic inactivation in bacteria and other microorganisms. Herein, we report the encapsulation of porphyrins into peptide hydrogels which serve as delivery vehicles. We selected the self-assembling Fmoc-Phe-Phe dipeptide, a potent gelator, as a scaffold due to its previously reported biocompatibility and three different water-soluble porphyrins as photosensitizers. We evaluated the structural, mechanical and in vitro degradation properties of these hydrogels, their interaction with NIH3T3 mouse skin fibroblasts, and we assessed their antimicrobial efficacy against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) bacteria. We found out that the hydrogels are cytocompatible and display antimicrobial efficiency against both strains with the zinc porphyrins being more efficient. Therefore, these hydrogels present a promising alternative for combating bacterial infections in the face of growing AMR concerns.

Dye-Sensitized Photocatalysis: Hydrogen Evolution and Alcohol-to-Aldehyde Oxidation without Sacrifical Electron Donor.

There is a growing interest in developing dye-sensitized photocatalytic systems (DSPs) to produce molecular hydrogen (H2 ) as alternative energy source. To improve the sustainability of this technology, we replaced the sacrificial electron donor (SED), typically an expensive and polluting chemical, with an alcohol oxidation catalyst. This study demonstrates the first dye-sensitized system using a diketopyrrolopyrrole dye covalently linked to 2,2,6,6-tetramethyl-1-piperidine-N-oxyl (TEMPO) based catalyst for simultaneous H2 evolution and alcohol-to-aldehyde transformation operating in water with visible irradiation.

Efficient and Stable Air-Processed Ternary Organic Solar Cells Incorporating Gallium-Porphyrin as an Electron Cascade Material.

Two gallium porphyrins, a tetraphenyl GaCl porphyrin, termed as (TPP)GaCl, and an octaethylporphyrin GaCl porphyrin, termed as (OEP)GaCl, were synthesized to use as an electron cascade in ternary organic bulk heterojunction films. A perfect matching of both gallium porphyrins' energy levels with that of poly(3-hexylthiophene-2,5-diyl) (P3HT) or poly[N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) polymer donor and the 6,6-phenyl C71 butyric acid methyl ester (PCBM) fullerene acceptor, forming an efficient cascade system that could facilitate electron transfer between donor and acceptor, was demonstrated. Therefore, ternary organic solar cells (OSCs) using the two porphyrins in various concentrations were fabricated where a performance enhancement was obtained. In particular, (TPP)GaCl-based ternary OSCs of low concentration (1:0.05 vv%) exhibited a ~17% increase in the power conversion efficiency (PCE) compared with the binary device due to improved exciton dissociation, electron transport and reduced recombination. On the other hand, ternary OSCs with a high concentration of (TPP)GaCl (1:0.1 vv%) and (OEP)GaCl (1:0.05 and 1:0.1 vv%) showed the poorest efficiencies due to very rough nanomorphology and suppressed crystallinity of ternary films when the GaCl porphyrin was introduced to the blend, as revealed from X-ray diffraction (XRD) and atomic force microscopy (AFM). The best performing devices also exhibited improved photostability when exposed to sunlight illumination for a period of 8 h than the binary OSCs, attributed to the suppressed photodegradation of the ternary (TPP)GaCl 1:0.05-based photoactive film.

Highly efficient light-driven hydrogen evolution utilizing porphyrin-based nanoparticles.

We developed dye-sensitized photocatalytic systems (DSPs) by utilizing porphyrins as a photosensitizer (PS) or as a photosensitizer-catalyst (PS/CAT) upon their chemisorption onto platinum-doped titanium dioxide nanoparticles (Pt-TiO2 NPs). The DSPs coated with Pt-Tc3CP (PS/CAT entity) exhibited a record-high stability (25 500 TONs) and H2 evolution activity (707 mmol g-1 h-1) compared to similar DSPs in the literature.

Light-induced hydrogen production from water using nickel(II) catalysts and N-doped carbon-dot photosensitizers: catalytic efficiency enhancement by increase of catalyst nuclearity.

Solar energy conversion to chemical energy via light-induced H2O splitting to O2 and H2 is considered to be a promising solution to meet the growing global energy demands. To make this transformation economically viable, it is necessary to develop sustainable photocatalytic systems. Herein, we present an efficient photocatalytic H2 production system which relies on components comprised of low-cost and high-abundance elements. In particular, a series of mononuclear complexes [Ni(LNS)3]- and [Ni(N^N)(LNS)2] and a hexanuclear complex [Ni(LNS)2]6 (N^N = diimine and LNS- = heterocyclic thioamidate with different group-substituents) were synthesized and utilized as catalysts, in combination with N-doped carbon dots as photosensitizer, for efficient H2 evolution from aqueous protons. Differences in H2 production efficiency were observed among the studied Ni(II) catalysts, with complexes bearing ligands with stronger electron-donating ability exhibiting higher catalytic activity. A remarkable catalytic efficiency enhancement was observed for the hexanuclear complex, with catalyst loadings lower than those of the mononuclear Ni(II) complexes, affording TONs >1550 (among the highest values reported for photocatalytic systems of similar type operating in H2O). These data provide an indication of catalytic cooperativity between the metal centers of the hexanuclear complex, and demonstrate the crucial role of atomically precise polynuclear Ni(II) catalysts in light-induced H2 production, a result that can guide future catalyst design towards the development of highly efficient, low-cost and environmentally benign photocatalytic systems.

Delivery of Porphyrins Through Self-Assembling Peptide Hydrogels for Accelerated Healing of Experimental Skin Defects In Vivo.

INTRODUCTION: The care and healing of skin defects resulting from different causes has been the object of research to achieve rapid and complete skin regeneration. Hydrogels have been used for their ability to maintain hydration during wound healing, absorb wound exudate, and cover the underlying tissue without adherence while being transparent. In this study, we evaluated the efficacy of a hydrogel (H) with encapsulated porphyrin (H+P) on a rat model of surgically-induced skin defects. METHODS: Four round 6 mm diameter skin defects were performed under general anesthesia on the dorsal area of 24 three-month-old "Young" and 24 twelve-month-old "Mature" male rats. Each age group was separated into the Control, H, and H+P groups, n=8 each, where no therapy, H, or H+P was respectively applied daily for 20 days. Digital photographs and skin biopsies were taken on the third, seventh, 10th, and 20th postoperative days and evaluated by planimetry, histology, and immunohistochemistry. RESULTS: Planimetry results demonstrated significantly decreased perimeter, diameter, and area measurements (p<0.005) of group H+P compared to Control and H groups on days 10 and 20 in the young rats, while in the mature rats, the significant differences were evident earlier (perimeter third day p<0.05; diameter and area seventh day p<0.05 and p<0.005, respectively vs. H). Granulation and scar tissue formation were also reduced in the H+P groups although they were not statistically significant. CONCLUSIONS: The application of H+P on the skin defects benefited the healing process in both young and mature animal groups, as evidenced by the statistically significant findings of planimetry. The beneficial healing process was more pronounced in the mature animals, both in the level of statistical significance as well as regarding time (evident already on the third day of healing), probably due to porphyrin assisting the reduced healing rate, which is observed in organisms of advanced age.

A covalently linked nickel(II) porphyrin-ruthenium(II) tris(bipyridyl) dyad for efficient photocatalytic water oxidation.

Visible-light-induced oxidation of water to dioxygen, catalyzed by a newly synthesized NiP-Ru dyad consisting of a ruthenium tris(bipyridyl), [Ru(bpy)3]2+ as a photosensitizer, and a low-cost nickel porphyrin, NiP as a water oxidation catalyst is reported.

Pyridine vs. Imidazole Axial Ligation on Cobaloxime Grafted Graphene: Hydrogen Evolution Reaction Insights.

While cobaloximes have been protagonists in the molecular (photo)catalytic hydrogen evolution reaction field, researchers originally shed light on the catalytically active metallic center. However, the specific chemical environment of cobalt, including equatorial and axial ligation, has also a strong impact on the catalytic reaction. In this article, we aim to demonstrate how pyridine vs. imidazole axial ligation of a cobaloxime complex covalently grafted on graphene affects the hydrogen evolution reaction performance in realistic acidic conditions. While pyridine axial ligation mirrors a drastically superior electrocatalytic performance, imidazole exhibits a remarkable long-term stability.

Pegylated-polycaprolactone nano-sized drug delivery platforms loaded with biocompatible silver(i) complexes for anticancer therapeutics.

Cytotoxic potential of Ag(i) coordination compounds against cancer cells is widely recognized, but their frequently low water solubility and potential adverse interactions of Ag(i) ions in biological media require their incorporation into suitable platforms to ensure effective transport and delivery at target sites. Herein, we developed and evaluated the in vitro cytotoxic activity of a biodegradable copolymer-based nano-sized drug delivery system for three cytotoxically active and lipophillic Ag(i) compounds. In particular, polymer-based nanoparticles of the newly synthesized amphiphilic methoxy-poly(ethylene glycol)-poly(caprolactone) (mPEG-PCL) copolymer were prepared as carriers for [Ag(dmp2SH)(PPh3)2]NO3 (1), [Ag(dmp2SH)(xantphos)]NO3 (2) and [Ag(dmp2S)(xantphos)] (3) (dmP2SH = 4,6-dimethylpyrimidine-2-thiol, xantphos = 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene) which exhibit high cytotoxicity against HeLa cancer cells, while they maintain low toxicity against HDFa normal cells. Taking advantage of the favorable donor-acceptor Lewis acid-base and electrostatic interactions between functional groups of 1-3 and mPEG-PCL copolymer, the formation of [X]@mPEG-PCL (X = 1,2,3) nanoparticles with nearly spherical shape was achieved. Satisfactory loading capacities and encapsulation efficiencies were obtained (13-15% and 80-88%, respectively). Differences in their mean size diameters were observed, revealing a dependence on the individual structural characteristics of the Ag(i) compounds. In vitro release profiles of the nanoparticles showed an initial burst stage, followed by a prolonged release stage extending over 15 days, with their release rates being determined by the mean size of the nanoparticles, as well as the type and crystallinity of the encapsulated Ag(i) compounds. In vitro cytotoxicity studies revealed an increased cytotoxic activity of compounds 1-3 after their encapsulation in mPEG-PCL copolymer against HeLa cells, with the actual concentrations of the loaded compounds responsible for the inhibition of cell viability being reduced by 8 times compared to the compounds in free form. Therefore, the current drug delivery system improves the pharmacokinetic properties of the three cytotoxic and biocompatible Ag(i) compounds, and may be beneficial for future in vivo anticancer treatment.

Porphyrins and phthalocyanines as biomimetic tools for photocatalytic H2 production and CO2 reduction.

The increasing energy demand and environmental issues caused by the over-exploitation of fossil fuels render the need for renewable, clean, and environmentally benign energy sources unquestionably urgent. The zero-emission energy carrier, H2 is an ideal alternative to carbon-based fuels especially when it is generated photocatalytically from water. Additionally, the photocatalytic conversion of CO2 into chemical fuels can reduce the CO2 emissions and have a positive environmental and economic impact. Inspired by natural photosynthesis, plenty of artificial photocatalytic schemes based on porphyrinoids have been investigated. This review covers the recent advances in photocatalytic H2 production and CO2 reduction systems containing porphyrin or phthalocyanine derivatives. The unique properties of porphyrinoids enable their utilization both as chromophores and as catalysts. The homogeneous photocatalytic systems are initially described, presenting the various approaches for the improvement of photosensitizing activity and the enhancement of catalytic performance at the molecular level. On the other hand, for the development of the heterogeneous systems, numerous methods were employed such as self-assembled supramolecular porphyrinoid nanostructures, construction of organic frameworks, combination with 2D materials and adsorption onto semiconductors. The dye sensitization on semiconductors opened the way for molecular-based dye-sensitized photoelectrochemical cells (DSPECs) devices based on porphyrins and phthalocyanines. The research in photocatalytic systems as discussed herein remains challenging since there are still many limitations making them unfeasible to be used at a large scale application before finding a large-scale application.

Cascades of energy and electron transfer in a panchromatic absorber.

The investigation of molecular model systems is fundamental towards a deeper understanding of key photochemical steps in natural photosynthesis. Herein, we report an entirely non-covalent triad consisting of boron dipyrromethene (BDP), porphyrin (ZnP), and fullerene (C60). Non-covalent binding motifs such as an amidinium-carboxylate salt bridge as well as axial pyridyl-metal coordination offer substantial electronic coupling and establish efficient pathways for photoactivated energy and electron transfer processes along a well-tuned gradient. Experimental findings from steady-state and time-resolved spectroscopic assays, as well as (spectro-)electrochemical measurements corroborate the formation of BDP|ZnP|C60 in solution, on one hand, and significant communication in the excited states, on the other hand. BDP acts as an energy harvesting antenna towards ZnP, which eventually undergoes charge separation with C60 by electron transfer from ZnP to C60. Notably, full spectral deconvolution of the transient species was achieved, supporting the successful self-assembly as well as giving a clear view onto the occurring photophysical processes and their spectral footprints upon photoexcitation.

Shape dependent photocatalytic H2 evolution of a zinc porphyrin.

Hydrogen is regarded as a promising molecular fuel in order to produce clean energy, thus it is of great importance to produce and store H2 in order to replace fossil fuels and to resolve the global energy and environmental problems. One strategy to produce hydrogen is the photocatalytic splitting of water. In this study different supramolecular architectures of a Zn(II) porphyrin, showing "flower", octahedral and "manta ray" shaped structures, were obtained using the "good-bad" solvent self-assembly protocol. More specifically, the bad solvent (methanol) was retained and the good solvent was alerted obtaining diverse assemblies. The different structures were studied by scanning electron microscopy, PXRD, UV-Vis and IR spectroscopies. The prepared structures were capable of proton reduction and production of molecular H2 in the presence of 5% w/w Pt-nanoparticles as catalysts and ascorbic acid as a sacrificial electron donor. Moreover, depending on the structure of the chromophore that is formed the amount of H2 produced varies. The maximum H2 production was obtained with the octahedral structures (185.5 µmol g-1 h-1).

Design and Synthesis of Porphyrin-Nitrilotriacetic Acid Dyads with Potential Applications in Peptide Labeling through Metallochelate Coupling.

The need to detect and monitor biomolecules, especially within cells, has led to the emerging growth of fluorescent probes. One of the most commonly used labeling techniques for this purpose is reversible metallochelate coupling via a nitrilotriacetic acid (NTA) moiety. In this study, we focus on the synthesis and characterization of three new porphyrin-NTA dyads, TPP-Lys-NTA, TPP-CC-Lys-NTA, and Py 3 P-Lys-NTA composed of a porphyrin derivative covalently connected with a modified nitrilotriacetic acid chelate ligand (NTA), for possible metallochelate coupling with Ni2+ ions and histidine sequences. Emission spectroscopy studies revealed that all of the probes are able to coordinate with Ni2+ ions and consequently can be applied as fluorophores in protein/peptide labeling applications. Using two different histidine-containing peptides as His6-tag mimic, we demonstrated that the porphyrin-NTA hybrids are able to coordinate efficiently with the peptides through the metallochelate coupling process. Moving one step forward, we examined the ability of these porphyrin-peptide complexes to penetrate and accumulate in cancer cells, exploring the potential utilization of our system as anticancer agents.

Unsymmetrical, monocarboxyalkyl meso-arylporphyrins in the photokilling of breast cancer cells using permethyl-ß-cyclodextrin as sequestrant and cell uptake modulator.

In the search for photosensitizers with chemical handles to facilitate their integration into complex drug delivery nanosystems, new, unsymmetrically substituted, water insoluble meso-tetraphenylporphyrin and meso-tetra(m-hydroxyphenyl)porphyrin derivatives bearing one carboxyalkyl side chain were synthesized. Permethyl-ß-cyclodextrin (pMßCD) was their ideal monomerizing host and highly efficient shuttle to transfer them into water. New assembly modes of the extremely stable (Kbinding > 1012 M-2) 2:1 complexes were identified. The complexes are photostable and do not disassemble in FBS-containing cell culture media for 24 h. Incubation of breast cancer MCF-7 cells with the complexes results in intense intracellular fluorescence, strongly enhanced in the endoplasmic reticulum (ER), high photokilling efficiency (~90%) and low dark toxicity. pMßCD stands out as a very capable molecular isolator of mono-carboxyalkyl-arylporphyrins that increases uptake and modulates their localization in the cells. The most efficient porphyrins are envisaged as suitable photosensitizers that can be linked to biocompatible drug carriers for photo- and chemo-therapy applications.

Carbon Nanodots as Electron Transport Materials in Organic Light Emitting Diodes and Solar Cells.

Charge injection and transport interlayers play a crucial role in many classes of optoelectronics, including organic and perovskite ones. Here, we demonstrate the beneficial role of carbon nanodots, both pristine and nitrogen-functionalized, as electron transport materials in organic light emitting diodes (OLEDs) and organic solar cells (OSCs). Pristine (referred to as C-dots) and nitrogen-functionalized (referred to as NC-dots) carbon dots are systematically studied regarding their properties by using cyclic voltammetry, Fourier-transform infrared (FTIR) and UV-Vis absorption spectroscopy in order to reveal their energetic alignment and possible interaction with the organic semiconductor's emissive layer. Atomic force microscopy unravels the ultra-thin nature of the interlayers. They are next applied as interlayers between an Al metal cathode and a conventional green-yellow copolymer-in particular, (poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-co-(1,4-benzo-{2,1',3}-thiadiazole)], F8BT)-used as an emissive layer in fluorescent OLEDs. Electrical measurements indicate that both the C-dot- and NC-dot-based OLED devices present significant improvements in their current and luminescent characteristics, mainly due to a decrease in electron injection barrier. Both C-dots and NC-dots are also used as cathode interfacial layers in OSCs with an inverted architecture. An increase of nearly 10% in power conversion efficiency (PCE) for the devices using the C-dots and NC-dots compared to the reference one is achieved. The application of low-cost solution-processed materials in OLEDs and OSCs may contribute to their wide implementation in large-area applications.

Photocatalytic hydrogen production of porphyrin nanostructures: spheres vs. fibrils, a case study.

Herein, we illustrate the preparation of a covalent connected peptide-porphyrin hybrid (Fmoc-FF-(Zn)Por). The thorough investigation of its self-organization features demonstrated that Fmoc-FF-(Zn)Por self-assembles into either spheres or fibrils by altering the solvent mixture. Interestingly, photocatalytic hydrogen (H2) evolution experiments revealed that fibrils were more efficient towards H2 production compared to spheres.

Preparation of hydrogen, fluorine and chlorine doped and co-doped titanium dioxide photocatalysts: a theoretical and experimental approach.

Titanium dioxide (TiO2) has a strong photocatalytic activity in the ultra-violet part of the spectrum combined with excellent chemical stability and abundance. However, its photocatalytic efficiency is prohibited by limited absorption within the visible range derived from its wide band gap value and the presence of charge trapping states located at the band edges, which act as electron-hole recombination centers. Herein, we modify the band gap and improve the optical properties of TiO2 via co-doping with hydrogen and halogen. The present density functional theory (DFT) calculations indicate that hydrogen is incorporated in interstitial sites while fluorine and chlorine can be inserted both as interstitial and oxygen substitutional defects. To investigate the synergy of dopants in TiO2 experimental characterization techniques such as Fourier transform infrared (FTIR), X-ray diffraction (XRD), X-ray and ultra-violet photoelectron spectroscopy (XPS/UPS), UV-Vis absorption and scanning electron microscopy (SEM) measurements, have been conducted. The observations suggest that the oxide's band gap is reduced upon halogen doping, particularly for chlorine, making this material promising for energy harvesting devices. The studies on hydrogen production ability of these materials support the enhanced hydrogen production rates for chlorine doped (Cl:TiO2) and hydrogenated (H:TiO2) oxides compared to the pristine TiO2 reference.

Controlling Solar Hydrogen Production by Organizing Porphyrins.

In this study, a highly efficient photocatalytic H2 production system is developed by employing porphyrins as photocatalysts. Palladium and platinum tetracarboxyporphyrins (PdTCP and PtTCP) are adsorbed or coadsorbed onto TiO2 nanoparticles (NPs), which act as the electron transport medium and as a scaffold that promotes the self-organization of the porphyrinoids. The self-organization of PdTCP and PtTCP, forming H- and J-aggregates, respectively, is the key element for H2 evolution, as in the absence of TiO2 NPs no catalytic activity is detected. Notably, J-aggregated PtTCPs are more efficient for H2 production than H-aggregated PdTCPs. In this approach, a single porphyrin, which self-organizes onto TiO2 NPs, acts as the light harvester and simultaneously as the catalyst, whereas TiO2 serves as the electron transport medium. Importantly, the concurrent adsorption of PdTCP and PtTCP onto TiO2 NPs results in the most efficient catalytic system, giving a turnover number of 22,733 and 30.2 mmol(H2 ) g(cat)-1 .

Molecular materials as interfacial layers and additives in perovskite solar cells.

Solar cells based on organo-metal halide perovskites have gained unprecedented research interest over the last few years due to their low-cost solution processability, high power conversion efficiency, which has recently reached a certified value of 25.2%, and abundance of raw materials. Nevertheless, the best efficiencies remain below the Shockley-Queisser theoretical limit of 32.5% due to several losses arising from either defect traps present in the bulk of the perovskite absorber or at the device heterointerfaces. While bulk defects are detrimental for the device performance by mainly limiting the open circuit voltage, interfacial layers are also crucial. They dictate the charge transfer/transport from the perovskite layer to the collecting electrodes, hence influencing the device photocurrent, but also act as protective barriers against oxygen and moisture penetration. Molecular materials and additives are widely used to improve the bulk properties of perovskite absorbers through the formation of high-quality perovskite films with superior optoelectronic properties, and improved crystallinity, and also of electronically clean interfaces with minimum losses during charge transfer/transport. In this review, we analyze the predominant pathways that contribute to voltage and current losses due to poor interfaces and also due to non-radiative recombination losses arising from inferior perovskite morphology and its inherent polycrystalline and highly defective nature. We then discuss strategies for achieving interfacial organic and inorganic molecular materials for application as electron and hole transport layers in perovskite solar cells with ideal energy levels, high charge mobilities and improved thermal, photo, and structural stability. Moreover, the prerequisites for molecular additives to achieve dimensionality engineering, defect passivation, molecular cross-linking, interfacial energy alignment and electronic doping are thoroughly discussed. Finally, we examine prospects for future research directions and commercialization.