Isolation and characterization of a bis(dithiolene)-supported tungsten-acetylenic complex as a model for acetylene hydratase.

Acetylene hydratase is currently the only known mononuclear tungstoenzyme that does not catalyze a net redox reaction. The conversion of acetylene to acetaldehyde is proposed to occur at a W(IV) active site through first-sphere coordination of the acetylene substrate. To date, a handful of tungsten complexes have been shown to bind acetylene, but many lack the bis(dithiolene) motif of the native enzyme. The model compound, [W(O)(mnt)2]2-, where mnt2- is 1,2-dicyano-1,2-dithiolate, was previously reported to bind an electrophilic acetylene substrate, dimethyl acetylenedicarboxylate, and characterized by FT-IR, UV-vis, potentiometry, and mass spectrometry (Yadav, J; Das, S. K.; Sarkar, S., J. Am. Chem. Soc., 1997, 119, 4316-4317). By slightly changing the electrophilic acetylene substrate, an acetylenic-bis(dithiolene)­tungsten(IV) complex has been isolated and characterized by FT-IR, UV-vis, NMR, X-ray diffraction, and X-ray absorption spectroscopy. Activation parameters for complex formation were also determined and suggest coordination-sphere reorganization is a limiting factor in the model complex reactivity.

Hydrogen-Atom Transfer Oxidation with H2O2 Catalyzed by [FeII(1,2-bis(2,2'-bipyridyl-6-yl)ethane(H2O)2]2+: Likely Involvement of a (µ-Hydroxo)(µ-1,2-peroxo)diiron(III) Intermediate.

The iron(II) triflate complex (1) of 1,2-bis(2,2'-bipyridyl-6-yl)ethane, with two bipyridine moieties connected by an ethane bridge, was prepared. Addition of aqueous 30% H2O2 to an acetonitrile solution of 1 yielded 2, a green compound with λmax=710 nm. Moessbauer measurements on 2 showed a doublet with an isomer shift (δ) of 0.35 mm/s and a quadrupole splitting (ΔEQ) of 0.86 mm/s, indicative of an antiferromagnetically coupled diferric complex. Resonance Raman spectra showed peaks at 883, 556 and 451 cm-1 that downshifted to 832, 540 and 441 cm-1 when 1 was treated with H218O2. All the spectroscopic data support the initial formation of a (µ-hydroxo)(µ-1,2-peroxo)diiron(III) complex that oxidizes carbon-hydrogen bonds. At 0°C 2 reacted with cyclohexene to yield allylic oxidation products but not epoxide. Weak benzylic C-H bonds of alkylarenes were also oxidized. A plot of the logarithms of the second order rate constants versus the bond dissociation energies of the cleaved C-H bond showed an excellent linear correlation. Along with the observation that oxidation of the probe substrate 2,2-dimethyl-1-phenylpropan-1-ol yielded the corresponding ketone but no benzaldehyde, and the kinetic isotope effect, kH/kD , of 2.8 found for the oxidation of xanthene, the results support the hypothesis for a metal-based H-atom abstraction mechanism. Complex 2 is a rare example of a (µ-hydroxo)(µ-1,2-peroxo)diiron(III) complex that can elicit the oxidation of carbon-hydrogen bonds.

Oxoiron(IV) Complex of the Ethylene-Bridged Dialkylcyclam Ligand Me2EBC.

We report herein the first example of an oxoiron(IV) complex of an ethylene-bridged dialkylcyclam ligand, [Fe(IV)(O)(Me2EBC)(NCMe)](2+) (2; Me2EBC = 4,11-dimethyl-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane). Complex 2 has been characterized by UV-vis, (1)H NMR, resonance Raman, Mössbauer, and X-ray absorption spectroscopy as well as electrospray ionization mass spectrometry, and its properties have been compared with those of the closely related [Fe(IV)(O)(TMC)(NCMe)](2+) (3; TMC = 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane), the intensively studied prototypical oxoiron(IV) complex of the macrocyclic tetramethylcyclam ligand. Me2EBC has an N4 donor set nearly identical with that of TMC but possesses an ethylene bridge in place of the 1- and 8-methyl groups of TMC. As a consequence, Me2EBC is forced to deviate from the trans-I configuration typically found for Fe(IV)(O)(TMC) complexes and instead adopts a folded cis-V stereochemistry that requires the MeCN ligand to coordinate cis to the Fe(IV)═O unit in 2 rather than in the trans arrangement found in 3. However, switching from the trans geometry of 3 to the cis geometry of 2 did not significantly affect their ground-state electronic structures, although a decrease in ν(Fe═O) was observed for 2. Remarkably, despite having comparable Fe(IV/III) reduction potentials, 2 was found to be significantly more reactive than 3 in both oxygen-atom-transfer (OAT) and hydrogen-atom-transfer (HAT) reactions. A careful analysis of density functional theory calculations on the HAT reactivity of 2 and 3 revealed the root cause to be the higher oxyl character of 2, leading to a stronger O---H bond specifically in the quintet transition state.

H2O2 activation with biomimetic non-haem iron complexes and AcOH: connecting the g = 2.7 EPR signal with a visible chromophore.

Mechanistic studies of H2O2 activation by complexes related to [(BPMEN)Fe(II)(CH3CN)2](2+) with electron-rich pyridines revealed that a new intermediate formed in the presence of acetic acid with a 465 nm visible band can be associated with an unusual g = 2.7 EPR signal. We postulate that this chromophore is an acylperoxoiron(III) intermediate.

An Iron(II)(1,3-bis(2'-pyridylimino)isoindoline) Complex as a Catalyst for Substrate Oxidation with H2O2. Evidence for a Transient Peroxodiiron(III) Species.

The complex [Fe(indH)(solvent)3](ClO4)2 (1) has been isolated from the reaction of equimolar amounts of 1,3-bis(2'-pyridylimino)isoindoline (indH) and Fe(ClO4)2 in acetonitrile and characterized by X-ray crystallography and several spectroscopic techniques. It is a suitable catalyst for the oxidation of thioanisoles and benzyl alcohols with H2O2 as the oxidant. Hammett correlations and kinetic isotope effect experiments support the involvement of an electrophilic metal-based oxidant. A metastable green species (2) is observed when 1 is reacted with H2O2 at -40 °C, which has been characterized to have a FeIII(µ-O)(µ-O2)FeIII core on the basis of UV-Vis, electron paramagnetic resonance, resonance Raman, and X-ray absorption spectroscopic data.

Protonation of a peroxodiiron(III) complex and conversion to a diiron(III/IV) intermediate: implications for proton-assisted O-O bond cleavage in nonheme diiron enzymes.

Oxygenation of a diiron(II) complex, [Fe(II)(2)(µ-OH)(2)(BnBQA)(2)(NCMe)(2)](2+) [2, where BnBQA is N-benzyl-N,N-bis(2-quinolinylmethyl)amine], results in the formation of a metastable peroxodiferric intermediate, 3. The treatment of 3 with strong acid affords its conjugate acid, 4, in which the (µ-oxo)(µ-1,2-peroxo)diiron(III) core of 3 is protonated at the oxo bridge. The core structures of 3 and 4 are characterized in detail by UV-vis, Mössbauer, resonance Raman, and X-ray absorption spectroscopies. Complex 4 is shorter-lived than 3 and decays to generate in ~20% yield of a diiron(III/IV) species 5, which can be identified by electron paramagnetic resonance and Mössbauer spectroscopies. This reaction sequence demonstrates for the first time that protonation of the oxo bridge of a (µ-oxo)(µ-1,2-peroxo)diiron(III) complex leads to cleavage of the peroxo O-O bond and formation of a high-valent diiron complex, thereby mimicking the steps involved in the formation of intermediate X in the activation cycle of ribonucleotide reductase.

Metal-sulfur valence orbital interaction energies in metal-dithiolene complexes: determination of charge and overlap interaction energies by comparison of core and valence ionization energy shifts.

The electronic interactions between metals and dithiolenes are important in the biological processes of many metalloenzymes as well as in diverse chemical and material applications. Of special note is the ability of the dithiolene ligand to support metal centers in multiple coordination environments and oxidation states. To better understand the nature of metal-dithiolene electronic interactions, new capabilities in gas-phase core photoelectron spectroscopy for molecules with high sublimation temperatures have been developed and applied to a series of molecules of the type Cp(2)M(bdt) (Cp = η(5)-cyclopentadienyl, M = Ti, V, Mo, and bdt = benzenedithiolato). Comparison of the gas-phase core and valence ionization energy shifts provides a unique quantitative energy measure of valence orbital overlap interactions between the metal and the sulfur orbitals that is separated from the effects of charge redistribution. The results explain the large amount of sulfur character in the redox-active orbitals and the 'leveling' of oxidation state energies in metal-dithiolene systems. The experimentally determined orbital interaction energies reveal a previously unidentified overlap interaction of the predominantly sulfur HOMO of the bdt ligand with filled π orbitals of the Cp ligands, suggesting that direct dithiolene interactions with other ligands bound to the metal could be significant for other metal-dithiolene systems in chemistry and biology.

A more reactive trigonal-bipyramidal high-spin oxoiron(IV) complex with a cis-labile site.

The trigonal-bipyramidal high-spin (S = 2) oxoiron(IV) complex [Fe(IV)(O)(TMG(2)dien)(CH(3)CN)](2+) (7) was synthesized and spectroscopically characterized. Substitution of the CH(3)CN ligand by anions, demonstrated here for X = N(3)(-) and Cl(-), yielded additional S = 2 oxoiron(IV) complexes of general formulation [Fe(IV)(O)(TMG(2)dien)(X)](+) (7-X). The reduced steric bulk of 7 relative to the published S = 2 complex [Fe(IV)(O)(TMG(3)tren)](2+) (2) was reflected by enhanced rates of intermolecular substrate oxidation.

Characterization of a high-spin non-heme Fe(III)-OOH intermediate and its quantitative conversion to an Fe(IV)═O complex.

We have generated a high-spin Fe(III)-OOH complex supported by tetramethylcyclam via protonation of its conjugate base and characterized it in detail using various spectroscopic methods. This Fe(III)-OOH species can be converted quantitatively to an Fe(IV)═O complex via O-O bond cleavage; this is the first example of such a conversion. This conversion is promoted by two factors: the strong Fe(III)-OOH bond, which inhibits Fe-O bond lysis, and the addition of protons, which facilitates O-O bond cleavage. This example provides a synthetic precedent for how O-O bond cleavage of high-spin Fe(III)-peroxo intermediates of non-heme iron enzymes may be promoted.

Characterization of a tricationic trigonal bipyramidal iron(IV) cyanide complex, with a very high reduction potential, and its iron(II) and iron(III) congeners.

Currently, there are only a handful of synthetic S = 2 oxoiron(IV) complexes. These serve as models for the high-spin (S = 2) oxoiron(IV) species that have been postulated, and confirmed in several cases, as key intermediates in the catalytic cycles of a variety of nonheme oxygen activating enzymes. The trigonal bipyramidal complex [Fe(IV)(O)(TMG(3)tren)](2+) (1) was both the first S = 2 oxoiron(IV) model complex to be generated in high yield and the first to be crystallographically characterized. In this study, we demonstrate that the TMG(3)tren ligand is also capable of supporting a tricationic cyanoiron(IV) unit, [Fe(IV)(CN)(TMG(3)tren)](3+) (4). This complex was generated by electrolytic oxidation of the high-spin (S = 2) iron(II) complex [Fe(II)(CN)(TMG(3)tren)](+) (2), via the S = 5/2 complex [Fe(III)(CN)(TMG(3)tren)](2+) (3), the progress of which was conveniently monitored by using UV-vis spectroscopy to follow the growth of bathochromically shifting ligand-to-metal charge transfer (LMCT) bands. A combination of X-ray absorption spectroscopy (XAS), Mössbauer and NMR spectroscopies was used to establish that 4 has a S = 0 iron(IV) center. Consistent with its diamagnetic iron(IV) ground state, extended X-ray absorption fine structure (EXAFS) analysis of 4 indicated a significant contraction of the iron-donor atom bond lengths, relative to those of the crystallographically characterized complexes 2 and 3. Notably, 4 has an Fe(IV/III) reduction potential of ∼1.4 V vs Fc(+/o), the highest value yet observed for a monoiron complex. The relatively high stability of 4 (t(1/2) in CD(3)CN solution containing 0.1 M KPF(6) at 25 °C ≈ 15 min), as reflected by its high-yield accumulation via slow bulk electrolysis and amenability to (13)C NMR at -40 °C, highlights the ability of the sterically protecting, highly basic peralkylguanidyl donors of the TMG(3)tren ligand to support highly charged high-valent complexes.

Oxygen activation at mononuclear nonheme iron centers: a superoxo perspective.

Dioxygen (O(2)) activation by iron enzymes is responsible for many metabolically important transformations in biology. Often a high-valent iron oxo oxidant is proposed to form upon O(2) activation at a mononuclear nonheme iron center, presumably via intervening iron superoxo and iron peroxo species. While iron(IV) oxo intermediates have been trapped and characterized in enzymes and models, less is known of the putative iron(III) superoxo species. Utilizing a synthetic model for the 2-oxoglutarate-dependent monoiron enzymes, [(Tp(iPr2))Fe(II)(O(2)CC(O)CH(3))], we have obtained indirect evidence for the formation of the putative iron(III) superoxo species, which can undergo one-electron reduction, hydrogen-atom transfer, or conversion to an iron(IV) oxo species, depending on the reaction conditions. These results demonstrate the various roles that the iron(III) superoxo species can play in the course of O(2) activation at a nonheme iron center.

Electronic Structure of the d Bent-metallocene Cp(2)VCl(2): A Photoelectron and Density Functional Study.

The Cp(2)VCl(2) molecule is a prototype for bent metallocene complexes with a single electron in the metal d shell, but experimental measure of the binding energy of the d electron by photoelectron spectroscopy eluded early attempts due to apparent decomposition in the spectrometer to Cp(2)VCl. With improved instrumentation, the amount of decomposition is reduced and subtraction of ionization intensity due to Cp(2)VCl from the Cp(2)VCl(2)/Cp(2)VCl mixed spectrum yields the Cp(2)VCl(2) spectrum exclusively. The measured ionization energies provide well-defined benchmarks for electronic structure calculations. Density functional calculations support the spectral interpretations and agree well with the ionization energy of the d(1) electron and the energies of the higher positive ion states of Cp(2)VCl(2). The calculations also account well for the trends to the other Group V bent metallocene dichlorides Cp(2)NbCl(2) and Cp(2)TaCl(2). The first ionization energy of Cp(2)VCl(2) is considerably greater than the first ionization energies of the second- and third-row transition metal analogues.

Photoelectron spectroscopy and electronic structure calculations of d1 vanadocene compounds with chelated dithiolate ligands: implications for pyranopterin Mo/W enzymes.

Gas-phase photoelectron spectroscopy and density functional theory have been used to investigate the electronic structures of open-shell bent vanadocene compounds with chelating dithiolate ligands, which are minimum molecular models of the active sites of pyranopterin Mo/W enzymes. The compounds Cp2V(dithiolate) [where dithiolate is 1,2-ethenedithiolate (S2C2H2) or 1,2-benzenedithiolate (bdt), and Cp is cyclopentadienyl] provide access to a 17-electron, d1 electron configuration at the metal center. Comparison with previously studied Cp2M(dithiolate) complexes, where M is Ti and Mo (respectively d0 and d2 electron configurations), allows evaluation of d0, d1, and d2 electronic configurations of the metal center that are analogues for the metal oxidation states present throughout the catalytic cycle of these enzymes. A "dithiolate-folding effect" that involves an interaction between the vanadium d orbitals and sulfur p orbitals is shown to stabilize the d1 metal center, allowing the d1 electron configuration and geometry to act as a low-energy electron pathway intermediate between the d0 and d2 electron configurations of the enzyme.

Electronic structure of bent titanocene complexes with chelated dithiolate ligands.

Gas-phase photoelectron spectroscopy and density functional theory have been utilized to investigate the interactions between the p orbitals of dithiolate ligands and d orbitals of titanium in bent titanocene complexes as minimum molecular models of active site features of pyranopterin Mo/W enzymes. The compounds Cp(2)Ti(S-S) [where (S-S) is 1,2-ethenedithiolate (S(2)C(2)H(2)), 1, 1,2-benzenedithiolate (bdt), 2, or 1,3-propanedithiolate (pdt), 3, and Cp(-) is cyclopentadienyl] provide access to a formal 16-electron d(0) electronic configuration at the metal. A "dithiolate-folding-effect" involving an interaction of metal and sulfur orbitals is demonstrated in complexes with arene- and enedithiolates. This effect is not observed for the alkanedithiolate in complex 3.