Alternative methods for the pilot-scale production and characterization of chitosan nanoparticles.

This work describes the production/characterization of low molar mass chitosan nanoparticles derived from waste shrimp shells (SSC), as well as from a commercial chitosan (CC). The production of low molar mass nanochitosan employed thermal shock, alternating between 100 °C and ambient temperature, followed by grinding the dry material (SSC and CC) in a ball mill, producing around 500 g of nanochitosan per batch. A highlight of the methodology employed is that it enables nanochitosan to be obtained even from a low quality commercial raw material. All particles had diameters smaller than 223 nm, with an average diameter below 25 nm (determined by DLS), while reductions of molar mass were between 8.4-fold and 13.5-fold. The depolymerization process resulted in a reduction in crystallinity of 38.1 to 25.4% and 55.6 to 25.9% in the CC and SSC samples, respectively. The production of nanochitosans was also confirmed by TEM through the observation of crystalline domains with diameters between 5 and 10 nm. This work perfectly reproduces the results on bench scale from previous research. The simple and inexpensive processes enable easy scale-up, representing an important advance in the production chain of biopolymers. Graphical abstract.

Two-Stage anaerobic digestion in agroindustrial waste treatment: A review.

The anaerobic digestion is a process widely recognized as an interesting alternative for the treatment and stabilization of residual organic substrates. However, several technical limitations were observed based on the characteristics of the organic matter submitted to the process, such as the presence of high concentrations of soluble sugars or fats. The technology of anaerobic digestion in multiple stages is described as a viable option in the control of variables, optimizing the environmental conditions of the main microorganisms involved in the process, assuring high solid removal and methane production, besides allowing a higher energy yield through the generation of molecular fuel hydrogen. Several studies reviewed the process of anaerobic digestion in multiple stages in the treatment of food waste, although few report its use applied directly to agroindustrial residues. Thus, the present work aims to review the literature evaluating the scenario and viability of the multi-stage anaerobic digestion process applied to agroindustrial effluents. Effluents such as manipueira, vinasse, and dairy wastewater are substrates that present high yields when treated by AD processes with stage separation. The high concentration of easily fermentable sugars results in a high production of molecular hydrogen (co-product of the production of volatile acids in the acid phase) and methane (methanogenic phase). The great challenges related to the development of the sector are focused on the stability of the composition and yield of hydrogen in the acid phase, besides the problems resulting from the treatment of complex residues. Thus, the present study suggests that future works should focus on the technologies of new microorganisms and optimization of process parameters, providing maturation and scale-up of the two-stage anaerobic digestion technique.

Environmental, economic and social impact of aviation biofuel production in Brazil.

The Brazilian aviation industry is currently developing biofuel technologies that can maintain the operational and energy demands of the sector, while reducing the dependence on fossil fuels (mainly kerosene) and greenhouse gas emissions. The aim of the current research was to identify the major environmental, economic and social impacts arising from the production of aviation biofuels in Brazil. Despite the great potential of these fuels, there is a significant need for improved routes of production and specifically for lower production costs of these materials. In addition, the productive chains of raw materials for obtaining these bioenergetics can be linked to environmental impacts by NOx emissions, extensive use of agricultural land, loss of wildlife and intensive water use, as well as economic, social and political impacts.