Differential Isotope Labeling of 38 Dietary Polyphenols and Their Quantification in Urine by Liquid Chromatography Electrospray Ionization Tandem Mass Spectrometry.

A large number of polyphenols are consumed with the diet and may contribute to the prevention of chronic diseases such as cardiovascular diseases, diabetes, cancers, and neurodegenerative diseases. More comprehensive methods are needed to measure exposure to this complex family of bioactive plant compounds in epidemiological studies. We report here a novel method enabling the simultaneous measurement in urine of 38 polyphenols representative of the main classes and subclasses found in the diet. This method is based on differential (12)C-/(13)C-isotope labeling of polyphenols through derivatization with isotopic dansyl chloride reagents and on the analysis of the labeled polyphenols by tandem mass spectrometry. This derivatization approach overcomes the need for costly labeled standards. Different conditions for enzyme hydrolysis of polyphenol glucuronides and sulfate esters, extraction, and dansylation of unconjugated aglycones were tested and optimized. Limits of quantification varied from 0.01 to 1.1 µM depending on polyphenols. Intrabatch coefficients of variation varied between 3.9% and 9.6%. Interbatch variations were lower than 15% for 31 compounds and lower than 29% for 6 additional polyphenols out of the 38 tested. Thirty seven polyphenols were validated and then analyzed in 475, 24 h urine samples from the European Prospective Investigation on Cancer and Nutrition (EPIC) study. Thirty four polyphenols could be detected and successfully estimated and showed large interindividual variations of concentrations (2-3 orders of magnitude depending on the compound), with median concentrations spanning from 0.01 to over 1000 µM for all 34 compounds.

Human exposure assessment to a large set of polymer additives through the analysis of urine by solid phase extraction followed by ultra high performance liquid chromatography coupled to tandem mass spectrometry.

Polymer items are extensively present in the human environment. Humans may be consequently exposed to some compounds, such as additives, incorporated in these items. The objective of this work is to assess the human exposure to the main additives such as those authorized in the packaging for pharmaceutical products. The urinary matrix was selected to optimally answer this challenge because it has already been proven that the exposure to chemicals can be revealed by the analysis of this biological matrix. A multi-residue analytical method for the trace analysis at ng/mL in human urine was developed, and consisted of an extraction of analytes from urine by solid phase extraction (SPE) and an analysis by ultra-high performance liquid chromatography coupled to a tandem mass spectrometer (UHPLC-MS/MS). Even if the quantification of these compounds was an analytical challenge because of (i) the presence of these substances in the analytical process, (ii) the diversity of their physicochemical properties, and (iii) the complexity of the matrix, the optimized method exhibited quantification limits lower than 25ng/mL and recoveries between 51% and 120% for all compounds. The method was validated and applied to 52 human urines. To the best of our knowledge, this work presents the first study allowing the assessment of the occurrence of more than twenty polymer additives at ng/mL in human urine.

MicroQuEChERS-nanoliquid chromatography-nanospray-tandem mass spectrometry for the detection and quantification of trace pharmaceuticals in benthic invertebrates.

Due to industrialization and the use of chemical products in everyday life, various types of drugs and pesticides are present in our environment, which threaten and cause negative impacts on aquatic ecosystems. The consequences of these pollutants are gradually becoming visible. Recent evidence confirms that long term exposure to environmental pharmaceutical concentrations can induce adverse effects in aquatic vertebrates and invertebrates such as reproductive impairments and collapse wild populations. Consequently, one of the challenges of environmental science is to evaluate the associated risks. In this context, a new methodology has been developed using nano-LC-nano-ESI MS/MS to quantify traces of two pharmaceuticals (a neuropharmaceutical drug, fluoxetine, and an anticonvulsant drug, carbamazepine) in two molluscs, Potamopyrgus antipodarum and Valvata piscinalis, which are both prosobranch gastropods. A simple and quick extraction method was developed based on a modified and miniaturized version of the QuEChERS method. The procedure involves the extraction of approximately 10 mg of wet mollusc tissue by 500 µL of a mixture of acetonitrile/water/hexane (50/20/30) and 100 mg of buffer salt. Thus, the extraction step was carried out on an individual scale. The sensitivity of this method allowed for the detection of levels as low as 18 ng/g and 128 ng/g for carbamazepine and fluoxetine, respectively, with recoveries of greater than 85% for the two targeted compounds. This method was then applied to both gastropod species exposed to fluoxetine under laboratory conditions. The results provide evidence of bioaccumulation in both P. antipodarum and V. piscinalis and reveal the inter-species differences.

Multi-residue analysis of emerging pollutants in benthic invertebrates by modified micro-quick-easy-cheap-efficient-rugged-safe extraction and nanoliquid chromatography-nanospray-tandem mass spectrometry analysis.

Aquatic ecosystems are continuously contaminated by agricultural and industrial sources. Although the consequences of this pollution are gradually becoming visible, their potential impacts on aquatic ecosystems are poorly known, particularly regarding the risk of bioaccumulation in different trophic levels. To establish a causality relationship between bioaccumulation and disease, experiments on biotic matrices must be performed. In this context, a multi-residue method for the analysis of 35 emerging pollutants in three benthic invertebrates (Potamopyrgus antipodarum, Gammarus fossarum, and Chironomus riparius) has been developed. Because the variation in response of each individual must be taken into account in ecotoxicological studies, the entire analytical chain was miniaturised, thereby reducing the required sample size to a minimum of one individual and scaling the method accordingly. A new extraction strategy based on a modified, optimised and miniaturised "QuEChERS" approach is reported. The procedure involves salting out liquid-liquid extraction of approximately 10-20mg of matrix followed by nano-liquid chromatography-nano electospray ionisation coupled with tandem mass spectrometry. The validated analytical procedure exhibited recoveries between 40 and 98% for all the target compounds and enabled the determination of pollutants on an individual scale in the ng g(-1) concentration. The method was subsequently applied to determine the levels of target analytes in several encaged organisms which were exposed upstream and downstream of an effluent discharge. The results highlighted a bioaccumulation of certain targeted emerging pollutants in three freshwater invertebrates, as well as inter-species differences. 18 out of 35 compounds were detected and eight were quantified. The highest concentrations were measured for ibuprofen in G. fossarum, reaching up to 105 ng g(-1).

A national reconnaissance for selected organic micropollutants in sediments on French territory.

To collect a large data set regarding the occurrence of organic substances in sediment, this study presents the examination of 20 micropollutants, as a national survey. The list of target compounds contains two alkylphenols, three polycyclic aromatic hydrocarbons (PAHs) not commonly included in monitoring programmes, six pesticides or metabolites, five pharmaceutical compounds, two hormones, one UV filter and bisphenol A. The selective and sensitive analytical methods, based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) sample preparation followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) or gas chromatography-time-of-flight mass spectrometry (GC-ToF-MS), allow the quantification at limits comprised between 0.5 and 23 ng/g, depending on the compound. The paper summarizes the analytical results from 154 sampling points. Of the 20 target compounds, 9 were determined at least once, and the sediments contained a maximum of 7 substances. The most frequently detected were PAHs (frequency, 77 %; max., 1,400 ng/g). The pharmaceutical compounds, hormones and pesticides were rarely detected in the samples; the most frequently detected was carbamazepine (frequency, 6 %; max., 31 ng/g). In some cases, the levels of PAHs and bisphenol A exceed the predicted no-effect concentration (PNEC) values.

Fate of pharmaceutical compounds and steroid hormones in soil: study of transfer and degradation in soil columns.

Numerous chemical products are dispersed into the environment, and the consequences can be sometimes harmful to humans and ecosystems. Pharmaceutical compounds and hormone steroids are among these substances that concern the scientific community. Currently, little data are available on the presence and fate of these compounds in the environment and, in particular, for solid matrices. Therefore, the aim of this work was to perform soil column experiments to evaluate the accumulation, transfer and degradation of these substances in soil. The analyses were based on efficient sample preparation followed by sensitive and selective liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). For this purpose, 23 compounds were chosen including both pharmaceutical compounds as well as steroid hormones. In addition, this experiment was performed on two soils with different properties (% clay, pH, etc.). To the best of our knowledge, no soil column experiments have been performed previously on a large number of pharmaceutical compounds and steroid hormones. Significant transfer was observed only for sulphonamides that can be justified by their polarity (log K ow < 3). Furthermore, some compounds have a cationic characteristic and are likely to be not much mobiles in soil due to cation exchange process. However, it was observed that the migration of the substances depends on the soil characteristics, such as the amount of clay and the pH values. Regarding the degradation, it was noticed that substances degraded rapidly in the two soils. Indeed, for most substances, their half-lives were lower than 20 days. Furthermore, it was observed that the degradation rate depended on the soil.

Survey regarding the occurrence of selected organic micropollutants in the groundwaters of overseas departments.

To collect a complete dataset regarding the occurrence of organic substances in groundwater, this study presents the examination of 66 organic contaminants in the groundwater of overseas departments, including pesticides, pharmaceutical compounds, hormones and some industrial substances. The selective and sensitive analytical methods are described. These techniques begin with solid-phase extraction (SPE) followed by analysis using liquid chromatography-tandem mass spectrometry (LC-MS/MS) and gas chromatography-mass spectrometry (GC-ToF-MS). The paper summarises the analytical results from 40 sampling points collected during two campaigns in Guadeloupe, Martinique, Reunion, Mayotte and Guiana, representing 80 samples. Of the 66 target substances, 36 were determined at least once. Among the most frequently detected are bisphenol A (frequency, 96%; max., 7,400 ng/L), caffeine (frequency, 91%; max., 1,240 ng/L), pentachlorophenol (frequency, 55%; max., 418 ng/L), and carbamazepine (frequency, 56%; max., 22 ng/L). The results do not put in evidence that the origin of the sample or climatic characteristics of these regions influence the dilution and release of micropollutants.

Monitoring the extraction of additives and additive degradation products from polymer packaging into solutions by multi-residue method including solid phase extraction and ultra-high performance liquid chromatography-tandem mass spectrometry analysis.

The use of polymer materials in industry for product packaging is increasing. The presence of additives in the polymer matrix enables the modification or improvement of the properties and performance of the polymer, but these industries are concerned regarding the extractability of these additives. The quantification of these additives is particularly challenging because of the presence of these substances as contaminants in all the analytical equipment and the diversity of their physicochemical properties. In this context, a multi-residue analytical method was developed for the trace analysis of the twenty main additives (and their degradation products) authorized in plastic products such as pharmaceutical packaging (e.g., antioxidants, release agents, and light absorbers). This analytical method consisted of a solid phase extraction (SPE) followed by an analysis using ultra-high performance liquid chromatography coupled to a tandem mass spectrometer (UHPLC-MS/MS). A comparison of two ionization interfaces and the optimization of the extraction procedure were discussed. The influence of the quality of the solvent type (distilled versus not distilled) and the nature of the SPE cartridges (Polypropylene versus Teflon(®)) were demonstrated. The optimized method exhibited a quantification limit lower than 20 ng mL(-1) and recoveries between 70 % and 120 % for all compounds. Finally, the method was validated according to the ICH directive and was subsequently applied to the extraction of polymers under different pH conditions and storage temperatures. To the best of our knowledge, this study presents the first methodology allowing the simultaneous quantification of 24 additives at low ng mL(-1).

Multi-residue analysis of emerging pollutants in sediment using QuEChERS-based extraction followed by LC-MS/MS analysis.

Emerging contaminants are suspected to cause adverse effects in humans and wildlife. Aquatic ecosystems are continuously contaminated by agricultural and industrial sources. To establish a causality relationship between the occurrence of contaminants in the environment and disease, experiments including all environmental matrices must be performed. Consequently, the current analytical tools must be improved. A new multi-residue method for analysing 15 emerging pollutants in sediments based on the Quick, Easy, Cheap, Effective, Rugged and Safe approach is reported. The development of such a multirisque, inter-family method for sediment including pharmaceuticals, pesticides, personal care products and plasticizers is reported for the first time. The procedure involves salting-out liquid-liquid extraction using acetonitrile and clean-up with dispersive solid phase extraction, followed by liquid chromatography coupled with tandem mass spectrometry. The validated analytical procedure exhibited recoveries between 40 and 98% for every target compound. This methodology facilitated the determination of pollutant contents at nanogram-per-gram concentrations.

Data-handling strategies for metabonomic studies: example of the UHPLC-ESI/ToF urinary signature of tetrahydrocannabinol in humans.

Metabonomics has become a very valuable tool and many research fields rely on results coming out from this combination of analytical techniques, chemometric strategies, and biological interpretation. Moreover, the matrices are more and more complex and the implications of the results are often of major importance. In this context, the need for pertinent validation strategies comes naturally. The choice of the appropriate chemometric method remains nevertheless a difficult task due to particularities such as: the number of measured variables, the complexity of the matrix and the purposes of the study. Consequently, this paper presents a detailed metabonomic study on human urine with a special emphasis on the importance of assessing the data's quality. It also describes, step by step, the statistical tools currently used and offers a critical view on some of their limits. In this work, 29 urine samples among which 15 samples obtained from tetrahydrocannabinol (delta-9-tetrahydrocannabinol)-consuming athletes, 5 samples provided by volunteers, and 9 samples obtained from athletes were submitted to untargeted analysis by means of ultra high-pressure liquid chromatography-electrospray ionization-time-of-flight mass spectrometry. Next, the quality of the obtained data was assessed and the results were compared to those found in databases. Then, unsupervised (principal component analysis (PCA)) and supervised (ANOVA/PCA, partial least-square-discriminant analysis (PLS-DA), orthogonal PLS-DA) univariate and multivariate statistical methods were applied.

Statistical evaluation of the influence of soil properties on recoveries and matrix effects during the analysis of pharmaceutical compounds and steroids by quick, easy, cheap, effective, rugged and safe extraction followed by liquid chromatography-tandem mass spectrometry.

Numerous chemical products are dispersed in our environment. Many of them are recognized as harmful to humans and the ecosystem. Among these harmful substances are antibiotics and steroid hormones. Currently, very few data are available on the presence and fate of these substances in the environment, in particular for solid matrices, mainly due to a lack of analytical methodologies. Indeed, soil is a very complex matrix, and the nature and composition of the soil has a significant impact on the extraction efficiency and the sensitivity of the method. For this reason a statistical approach was performed to study the influence of soil parameters (clay, silt, sand and organic carbon percentages and cation exchange capacity (CEC)) on recoveries and matrix effects of various pharmaceuticals and steroids. Thus, an analysis of covariance (ANCOVA) was performed when several substances were analyzed simultaneously, whereas a Pearson correlation was used to study the compounds individually. To the best of our knowledge, this study is the first time such an experiment was performed. The results showed that clay and organic carbon percentages as well as the CEC have an impact on the recoveries of most of the target substances, the variables being anti-correlated. This result suggests that the compounds are trapped in soils with high levels of clay and organic carbon and a high CEC. For the matrix effects, it was shown that the organic carbon content has a significant effect on steroid hormones and penicillin G matrix effects (positive correlation). Finally, interaction effects (first order) were evaluated. This latter point corresponds to the crossed effects that occur between explanatory variables (soil parameters). Indeed, the value taken by an explanatory variable can have an influence on the effect that another explanatory variable has on a dependent variable. For instance, it was shown that some parameters (silt, sand) have an impact on the effect that clay content has on recoveries. Besides, CEC and silt affect the influence that organic carbon percentage has on matrix effect. This original approach provides a better understanding of the complex interactions that occur in soil and could be useful to understand and predict the performance of an analytical method.

Doping control using high and ultra-high resolution mass spectrometry based non-targeted metabolomics-a case study of salbutamol and budesonide abuse.

We have detected differences in metabolite levels between doped athletes, clean athletes, and volunteers (non athletes). This outcome is obtained by comparing results of measurements from two analytical platforms: UHPLC-QTOF/MS and FT-ICR/MS. Twenty-seven urine samples tested positive for glucocorticoids or beta-2-agonists and twenty samples coming from volunteers and clean athletes were analyzed with the two different mass spectrometry approaches using both positive and negative electrospray ionization modes. Urine is a highly complex matrix containing thousands of metabolites having different chemical properties and a high dynamic range. We used multivariate analysis techniques to unravel this huge data set. Thus, the several groups we created were studied by Principal Components Analysis (PCA) and Partial Least Square regression (PLS-DA and OPLS) in the search of discriminating m/z values. The selected variables were annotated and placed on pathway by using MassTRIX.

Determination of uptake kinetics and sampling rates for 56 organic micropollutants using "pharmaceutical" POCIS.

The literature increasingly reports sampling rates (Rs) for Polar Organic Chemical Integrative Samplers (POCIS) but the data obtained come from various calibration systems that are not always well-defined (agitation, temperature, measured micropollutant concentrations in water,…). In order to obtain accurate laboratory Rs for priority and emerging substances, POCIS need to be exposed in a robust and well-defined calibration system. Thus, we built a flow-through calibration system containing tap water spiked with 56 organic micropollutants (alkylphenols and phenols, hormones, pesticides, pharmaceuticals, UV filter). POCIS were immersed for up to 28 days. Tap water micropollutant concentrations and additional parameters (temperature, pH, conductivity, dissolved organic carbon, flow velocities) were kept constant and controlled throughout the calibration experiment. Based on the observed uptake kinetics, we distinguished four types of micropollutant accumulation patterns: curvilinear accumulation (30 molecules, group 1), accumulation with an inflexion point (13 molecules, group 2), random accumulation (eight molecules, group 3), and no or very low accumulation (five molecules, group 4). Rs was calculated for 43 out of 56 micropollutants (groups 1 and 2). Calculated Rs values ranged from 0.030 L/d to 0.398 L/d. POCIS can supply TWA concentrations for hormones, pesticides, several pharmaceuticals, a few alkylphenols, and the UV filter. Our Rs results are generally less than two fold-different (higher or lower depending on target molecule) to the literature data using the same type of calibration system or for micropollutants with log Kow>2.65. We found a quadratic correlation between Rs and log D for betablockers, herbicides and hormones.

Accumulation and half-lives of 13 pesticides in muscle tissue of freshwater fishes through food exposure.

Fish are often exposed to various molecules like pesticides. Some of these compounds get biomagnified within aquatic food web, inducing health hazards of consumers. However, behaviors of many pesticides are still unknown. This work aims to study the uptake and the elimination of some of them in muscle tissue of edible fish (azoxystrobin, clomazone, diflufenican, dimethachlor, carbendazim, iprodion, isoproturon, mesosulfuron-methyl, metazachlor, napropamid, quizalofop, and thifensulfuron-methyl). Two freshwater fish species (Perca fluviatilis and Cyprinus carpio) were exposed to a mixture of these 13 pesticides, via multi-contaminated pellets, and then, eliminated. Compounds were measured in food, water and muscle tissue using multi-residues methods. Kinetics, biomagnification factors (BMFs) and half-lives (t1/2) were estimated and they did not show a large difference between the species. Muscular BMFs ranged from 2 × 10(-6) (mesosulfuron-methyl in perch) to 1 × 10(-3) (isoproturon and napropamid in perch) and t1/2 ranged from 0.8 (mesosulfuron-methyl in perch) to 40.3d (napropamid in carp). BMFs were also modeled as a function of Kow value. All BMF values were explained by the model, except for diflufenican which had a BMF lower than that expected by our modeling work, probably due to an efficient metabolism. Results led to the conclusion that none of these chemicals would probably be biomagnified within aquatic food webs.

Pesticide pressure and fish farming in barrage pond in Northeastern France. Part II: residues of 13 pesticides in water, sediments, edible fish and their relationships.

Residues of pesticides in fish farming productions from barrage ponds are seldom studied in spite of increasing health questionings and environmental concerns. The purpose of this study is to establish the pesticide contamination profiles of sediments and edible fish from five ponds in Northeastern France. Multi-residues method and liquid chromatography-tandem mass spectrometry analysis were used to quantify 13 pesticides (azoxystrobin, carbendazim, clomazone, diflufenican, dimethachlor, fluroxypyr, iprodion, isoproturon, mesosulfuron-methyl, metazachlor, napropamid, quizalofop and thifensulfuron-methyl). Ten sediments and 143 muscles samples were analysed, corresponding to two successive fishing campaigns (first fishing date and second fishing date (P2), about 1 year later) on five sites (noted C-0, C-25, C-45, C-75 and C-85 to express the increasing gradient of crop area). Isoproturon was present in all sediments samples (1.8-56.4 µg/kg dry weight). During P2 period, carbendazim was quantified in the fish of site C-0 (0.09 ± 0.02, 0.2 ± 0.1 and 0.17 ± 0.06 µg/kg wet weight (ww) for roach, carp and perch, respectively). Metazachlor was only quantified in perch of the site C-25 (0.13 ± 0.02 µg/kg ww). Concentrations of isoproturon were similar for the sites C-45 and C-75 with 0.4 ± 0.1 and 0.75 ± 0.06 µg/kg ww for carp and perch, respectively. Contamination of fish reflected generally concentrations in surroundings. Isoproturon was the most concentrated and its main source was water for perch while carp was exposed through both water and sediments, highlighting their life strategies in pond.

Development of a multi-residue method using acetonitrile-based extraction followed by liquid chromatography-tandem mass spectrometry for the analysis of steroids and veterinary and human drugs at trace levels in soil.

The aim of this study was to develop an analytical method for the analysis of traces of hormonal steroids and veterinary and human drugs in soil. Thus, 31 substances were selected, including 14 veterinary products, 11 hormonal steroids and 6 other well-known human contaminant compounds. The procedure inspired by the quick, easy, cheap, effective, rugged and safe (QuEChERS) extraction method was developed. First the acetonitrile-based extraction was optimized. This step was followed by a solid-phase extraction (SPE) clean-up using both a strong anion-exchange cartridge and a polymeric cartridge. The analysis was then performed using liquid chromatography coupled to a triple quadrupole analyser operated with tandem mass spectrometry. This analytical procedure was validated using the ICH/2005 standard by evaluating the linearity (from 0.01 ng/g to 1000 ng/g--R²>0.99), the intra-day precision (relative standard deviation (RSD)<20%), the inter-day precision (RSD<30%), recoveries (40-110% for most of the compounds) and limits of detection and quantification. This method allowed for the determination of the target analytes in the lower ng/g concentration range. The methodology was then applied to real soil samples collected in several areas of France that received different manure or sludge treatments. Some target compounds were detected at very low level (inferior to the ng/g). Veterinary antibiotics, mainly from the sulfonamide family, were found in soils treated by manure (0.02-0.12 ng/g). On the other hand, pharmaceuticals usually used by humans (carbamazepine, ibuprofen) were detected in soils treated by domestic sludge.

Multiresidue analysis of aromatic organochlorines in soil by gas chromatography-mass spectrometry and QuEChERS extraction based on water/dichloromethane partitioning. Comparison with accelerated solvent extraction.

A novel multiresidue method was developed for the simultaneous analysis of 34 organochlorines, including chlorobenzenes, chlorophenols, chlorinated hydrocarbons and chlorinated olefins, in soil by GC-MS, using a QuEChERS-based extraction. The conventional QuEChERS method was optimised and, for the first time, the use of a non miscible-water solvent was required. The method was compared to ASE extraction, versatile technique widely used for the soils' extraction and QuEChERS-based method was shown to be the most efficient in terms of recoveries, simplicity and rapidity. For ASE, recoveries between 42% and 85% were obtained for the majority of the compounds. However, due to the high pressure, all volatile compounds were lost. In opposite, QuEChERS extraction allowed detection and quantification of all the compounds with recoveries between 60% and 100%. Moreover, no additional clean up by dispersive SPE on PSA was necessary, which allowed reducing the cost of the analysis. Performance of the method was assessed. The method was linear over the range of concentration of 10-5000 µg kg(-1). Precision, expressed as intra-day precision and inter-day variation was verified at three concentrations. Limits of detection were from 2 to 50 µg kg(-1) and limits of quantification from 7 to 170 µg kg(-1) for the majority of the compounds (chlorobenzenes and chlorinated hydrocarbons and olefins), except for chlorophenols. The method was further applied to different soils coming from a contaminated industrial site, where a new environmental remediation process, using phytoremediation, was tested. The results showed that the method could be applied to any kind of soils (mineral or organic) and was appropriate to very volatile compounds which were not available with conventional technique.

Quantification of steroids and endocrine disrupting chemicals in rat ovaries by LC-MS/MS for reproductive toxicology assessment.

Reproductive function is controlled by a finely tuned balance of androgens and estrogens. Environmental toxicants, notably endocrine disrupting chemicals (EDCs), appear to be involved in the disruption of hormonal balance in several studies. To further describe the effects of selected EDCs on steroid secretion in female rats, we aim to simultaneously investigate the EDC concentration and the sex hormone balance in the ovaries. Therefore, an effective method has been developed for the quantification of the sex steroid hormones (testosterone, androstenedione, estradiol, and estrone) and four endocrine disrupting chemicals (bisphenol A, atrazine, and the active metabolites of methoxychlor and vinclozolin) in rat ovaries. The sample preparation procedure is based on the so-called "quick, easy, cheap, effective, rugged, and safe" approach, and an analytical method was developed to quantify these compounds with low detection limits by liquid chromatography coupled with a tandem mass spectrometer. This analytical method, applied to rat ovary samples following subacute EDC exposure, revealed some new findings for toxicological evaluation. In particular, we showed that EDCs with the same described in vitro mechanisms of action have different effects on the gonadal steroid balance. These results highlight the need to develop an integrative evaluation with the simultaneous measurement of EDCs and numerous steroids for good risk assessment.

Multi-residue analysis of free and conjugated hormones and endocrine disruptors in rat testis by QuEChERS-based extraction and LC-MS/MS.

Endocrine disrupting compounds (EDCs) are suspected to be responsible for many disorders of the human reproductive system. To establish a causality relationship between exposure to endocrine disruptors and disease, experiments on animals must be performed with improved or new analytical tools. Therefore, a simple, rapid, and effective multi-residue method was developed for the determination of four steroid hormones (i.e., testosterone, androstenedione, estrone, and estradiol), glucuronide and sulfate conjugates of estrone and estradiol and four endocrine disruptors in rat testis (i.e., bisphenol A, atrazine, and active metabolites of methoxychlor and vinclozolin). The sample preparation procedure was based on the Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) approach. An analytical method was then developed to quantify these compounds at ultra-trace levels by liquid chromatography coupled to tandem mass spectrometry. The QuEChERS extraction was optimized with regard to the acetonitrile/water ratio used in the extraction step, the choice of the cleanup method and the acetonitrile/hexane ratio used in the cleanup step. The optimized extraction method exhibited recoveries between 89% and 108% for all tested compounds except the conjugates (31% to 58%). The detection limits of all compounds were below 20 ng g(-1) of wet weight of testis. The method was subsequently applied to determine the levels of hormones and EDCs in seven rat testis samples.