Dual Interface Compatibility Enabled via Composite Solid Electrolyte with High Transference Number for Long-Life All-Solid-State Lithium Metal Batteries.

The development of solid-state electrolytes (SSEs) effectively solves the safety problem derived from dendrite growth and volume change of lithium during cycling. In the meantime, the SSEs possess non-flammability compared to conventional organic liquid electrolytes. Replacing liquid electrolytes with SSEs to assemble all-solid-state lithium metal batteries (ASSLMBs) has garnered significant attention as a promising energy storage/conversion technology for the future. Herein, a composite solid electrolyte containing two inorganic components (Li6.25 Al0.25 La3 Zr2 O12 , Al2 O3 ) and an organic polyvinylidene difluoride matrix is designed rationally. X-ray photoelectron spectroscopy and density functional theory calculation results demonstrate the synergistic effect among the components, which results in enhanced ionic conductivity, high lithium-ion transference number, extended electrochemical window, and outstanding dual interface compatibility. As a result, Li||Li symmetric battery maintains a stable cycle for over 2500 h. Moreover, all-solid-state lithium metal battery assembled with LiNi0.6 Co0.2 Mn0.2 O2 cathode delivers a high discharge capacity of 168 mAh g-1 after 360 cycles at 0.1 C at 25 °C, and all-solid-state lithium-sulfur battery also exhibits a high initial discharge capacity of 912 mAh g-1 at 0.1 C. This work demonstrates a long-life flexible composite solid electrolyte with excellent interface compatibility, providing an innovative way for the rational construction of next-generation high-energy-density ASSLMBs.

Na4-xSn2-xSbxGe5O16, an Air-Stable Solid-State Na-Ion Conductor.

The structure of a Na4Sn2Ge5O16 phase was established via single-crystal X-ray diffraction. Unusually large displacement parameters of Na atoms suggested the possibility of Na+ ionic conductivity. To create Na deficiencies and thus increase the Na+ mobility in Na4Sn2Ge5O16, Sn4+ cations were partially substituted with Sb5+. A series of Na4-xSn2-xSbxGe5O16 samples (x = 0, 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, or 0.35) were prepared by solid-state reactions and characterized with electrical impedance spectroscopy in the range of 25-200 °C. The highest ionic conductivity value was achieved in the Na3.8Sn1.8Sb0.2Ge5O16 sample (1.6 mS cm-1 at 200 °C). Na+ migration pathways were calculated using the bond-valence energy landscape approach, and two-dimensional conductivity channels with low energy barriers (≈0.4 eV) were found in the structure. Three-dimensional conductivity can also be achieved in the structure; however, it has a much higher energy barrier. The pristine phase and Na3.8Sn1.8Sb0.2Ge5O16 sample were studied via 23Na and 119Sn solid-state nuclear magnetic resonance. A faster exchange between the Na sites was observed in the doped sample.

Coordinated Immobilization and Rapid Conversion of Polysulfide Enabled by a Hollow Metal Oxide/Sulfide/Nitrogen-Doped Carbon Heterostructure for Long-Cycle-Life Lithium-Sulfur Batteries.

Lithium-sulfur batteries (LSBs) are recognized as the prospective candidate in next-generation energy storage devices due to their gratifying theoretical energy density. Nonetheless, they still face the challenges of the practical application including low utilization of sulfur and poor cycling life derived from shuttle effect of lithium polysulfides (LiPSs). Herein, a hollow polyhedron with heterogeneous CoO/Co9 S8 /nitrogen-doped carbon (CoO/Co9 S8 /NC) is obtained through employing zeolitic imidazolate framework as precursor. The heterogeneous CoO/Co9 S8 /NC balances the redox kinetics of Co9 S8 with chemical adsorption of CoO toward LiPSs, effectively inhibiting the shuttle of LiPSs. The mechanisms are verified by both experiment and density functional theory calculation. Meanwhile, the hollow structure acts as a sulfur storage chamber, which mitigates the volumetric expansion of sulfur and maximizes the utilization of sulfur. Benefiting from the above advantages, lithium-sulfur battery with S-CoO/Co9 S8 /NC achieves a high initial discharge capacity (1470 mAh g-1 ) at 0.1 C and long cycle life (ultralow capacity attenuation of 0.033% per cycle after 1000 cycles at 1 C). Even under high sulfur loading of 3.0 mg cm-2 , lithium-sulfur battery still shows the satisfactory electrochemical performance. This work may provide an idea to elevate the electrochemical performance of LSBs by constructing a hollow metal oxide/sulfide/nitrogen-doped carbon heterogeneous structure.

BaCuSiTe3: A Noncentrosymmetric Semiconductor with CuTe4 Tetrahedra and Ethane-like Si2Te6 Units.

BaCuSiTe3 was prepared from the elements in a solid-state reaction at 973 K, followed by slow cooling to room temperature. This telluride adopts a new, hitherto unknown structure type, crystallizing in the noncentrosymmetric space group Pc with a = 7.5824(1) Å, b = 8.8440(1) Å, c = 13.1289(2) Å, ß = 122.022(1)°, and V = 746.45(2) Å3 (Z = 4). The structure consists of a complex network of two-dimensionally connected CuTe4 tetrahedra and ethane-like Si2Te6 units with a Si-Si bond. This semiconducting material has an optical band gap of 1.65 eV and a low thermal conductivity of 0.50 W m-1 K-1 at 300 K. Calculations of its optical properties revealed a moderate birefringence of 0.23 and a second-order harmonic generation response of deff = 3.4 pm V-1 in the static limit.