Whole genome sequencing and the lignocellulose degradation potential of Bacillus subtilis RLI2019 isolated from the intestine of termites.

BACKGROUND: Lignocellulosic biomass is the most abundant and renewable terrestrial raw material for conversion into bioproducts and biofuels. However, the low utilization efficiency of lignocellulose causes environmental pollution and resource waste, which limits the large-scale application of bioconversion. The degradation of lignocellulose by microorganisms is an efficient and cost-effective way to overcome the challenge of utilizing plant biomass resources. This work aimed to screen valuable cellulolytic bacteria, explore its molecular mechanism from genomic insights, and investigate the ability of the strain to biodegrade wheat straw. RESULTS: Bacillus subtilis (B. subtilis) RLI2019 was isolated from the intestine of Reticulitermes labralis. The strain showed comprehensive enzyme activities related to lignocellulose degradation, which were estimated as 4.06, 1.97, 4.12, 0.74, and 17.61 U/mL for endoglucanase, ß-glucosidase, PASC enzyme, filter paper enzyme, and xylanase, respectively. Whole genome sequencing was performed to better understand the genetic mechanism of cellulose degradation. The genome size of B. subtilis RLI2019 was 4,195,306 bp with an average GC content of 43.54%, and the sequence characteristics illustrated an extremely high probability (99.41%) as a probiotic. The genome contained 4,381 protein coding genes with an average GC content of 44.20%, of which 145 genes were classified into six carbohydrate-active enzyme (CAZyme) families and 57 subfamilies. Eight cellulose metabolism enzyme-related genes and nine hemicellulose metabolism enzyme-related genes were annotated by the CAZyme database. The starch and sucrose metabolic pathway (ko00500) was the most enriched with 46 genes in carbohydrate metabolism. B. subtilis RLI2019 was co-cultured with wheat straw for 7 days of fermentation, the contents of neutral detergent fiber, acid detergent fiber, hemicellulose, and lignin were significantly reduced by 5.8%, 10.3%, 1.0%, and 4.7%, respectively. Moreover, the wheat straw substrate exhibited 664.9 µg/mL of reducing sugars, 1.22 U/mL and 6.68 U/mL of endoglucanase and xylanase activities, respectively. Furthermore, the fiber structures were effectively disrupted, and the cellulose crystallinity was significantly reduced from 40.2% to 36.9%. CONCLUSIONS: The complex diversity of CAZyme composition mainly contributed to the strong cellulolytic attribute of B. subtilis RLI2019. These findings suggest that B. subtilis RLI2019 has favorable potential for biodegradation applications, thus it can be regarded as a promising candidate bacterium for lignocellulosic biomass degradation.

Effect of Controlling Light on Cashmere Growth and Harmful Gas Parameters in Shanbei White Cashmere Goats.

The quality and yield of cashmere closely affect the economic benefits of cashmere goat farming. Studies have shown that controlling light can have an important impact on cashmere but can also affect the concentration of harmful gases. In order to explore the impact of a short photoperiod on the growth of cashmere and harmful gases in goat houses, 130 female (non-pregnant) Shanbei white cashmere goats, aged 4-5 years with similar body weights, were randomly divided into a control group and a treatment group, with 65 goats in each group. The dietary nutrition levels of the experimental goats were the same, and completely natural light was used in the control group; the light control group received light for 7 h every day (9:30-16:30), and the rest of the time (16:30-9:30 the next day) they did not receive light. The light control treatment was carried out in a control house, and the gas content was analyzed. It was found that a shortened period of light exposure could increase the annual average cashmere production by 34.5%. The content of each gas has a certain functional relationship with the measurement time period, but at the same time, we found that the content of NH3 also changes seasonally. In summary, the use of shortened light periods when raising cashmere goats can significantly increase cashmere production and quality, but at the same time, it will increase the concentration of harmful gases in the goat barn, and ventilation should be increased to ensure the health of the goats and the air quality in the barn.

A Hybrid Process Integrating Reverse Engineering, Pre-Repair Processing, Additive Manufacturing, and Material Testing for Component Remanufacturing.

Metallic components can gain defects such as dents, cracks, wear, heat checks, deformation, etc., that need to be repaired before reinserting into service for extending the lifespan of these parts. In this study, a hybrid process was developed to integrate reverse engineering, pre-repair processing, additive manufacturing, and material testing for the purpose of part remanufacturing. Worn components with varied defects were scanned using a 3D scanner to recreate the three-dimensional models. Pre-repair processing methods which include pre-repair machining and heat-treatment were introduced. Strategies for pre-repair machining of defects including surface impact damage, surface superficial damage and cracking were presented. Pre-repair heat-treatment procedure for H13 tool steel which was widely used in die/mold application was introduced. Repair volume reconstruction methodology was developed to regain the missing geometry on worn parts. The repair volume provides a geometry that should be restored in the additive manufacturing process. A damaged component was repaired using the directed energy deposition process to rebuild the worn geometry. The repaired part was inspected in microstructure and mechanical aspects to evaluate the repair. The hybrid process solved key issues associated with repair, providing a solution for automated metallic component remanufacturing.

Fabrication of AlCoCrFeNi High-Entropy Alloy Coating on an AISI 304 Substrate via a CoFe2Ni Intermediate Layer.

Through laser metal deposition, attempts were made to coat AlCoCrFeNi, a high-entropy alloy (HEA), on an AISI 304 stainless steel substrate to integrate their properties. However, the direct coating of the AlCoCrFeNi HEA on the AISI 304 substrate was found to be unviable due to cracks at the interface between these two materials. The difference in compositional change was suspected to be the source of the cracks. Therefore, a new transition route was performed by coating an intermediate layer of CoFe2Ni on the AISI 304 substrate. Investigations into the microstructure, phase composition, elemental composition and Vickers hardness were carried out in this study. Consistent metallurgical bonding was observed along both of the interfaces. It was found that the AlCoCrFeNi alloy solidified into a dendritic microstructure. The X-ray diffraction pattern revealed a transition of the crystal structure of the AISI 304 substrate to the AlCoCrFeNi HEA. An intermediate step in hardness was observed between the AISI 304 substrate and the AlCoCrFeNi HEA. The AlCoCrFeNi alloy fabricated was found to have an average hardness of 418 HV, while the CoFe2Ni intermediate layer had an average hardness of 275 HV.