Highly specific nanobody against herbicide 2,4-dichlorophenoxyacetic acid for monitoring of its contamination in environmental water.

2,4-dichlorophenoxyacetic acid (2,4-D), a widely used herbicide, is a small organic chemical pollutant in the environment. To develop a nanobody-based immunoassay for monitoring trace levels of 2,4-D, a step-wise strategy for the generation of nanobodies highly specific against this small chemical was employed. Firstly, we synthesized three novel haptens mimicking 2,4-D and assessed their influence on the sensitivity and specificity of the existing antibody-based assay. Polyclonal antibodies (pAb) from rabbits showed good sensitivity and moderate specificity for 2,4-D, pAb from llama based on selected haptens showed similar performance when compared to those from rabbits. Secondly, nanobodies derived from llama were generated for 2,4-D by an effective procedure, including serum monitoring and one-step library construction. One nanobody, NB3-9, exhibited good sensitivity against 2,4-D (IC50 = 29.2 ng/mL) had better specificity than the rabbit pAb#1518, with no cross-reactivities against the 2,4-D analogs tested. Thirdly, one-step fluorescent enzyme immunoassay (FLEIA) for 2,4-D based on a nanobody-alkaline phosphatase (AP) fusion was developed with IC50 of 1.9 ng/mL and a linear range of 0.4-8.6 ng/mL. Environmental water samples were analyzed by FLEIA and LC-MS/MS for comparison, and the results were consistent between both methods. Therefore, the proposed step-wise strategy from hapten design to nanobody-AP fusion production was successfully conducted, and the resulting nanobody based FLEIA was demonstrated as a convenient tool to monitor 2,4-D residuals in the environment.

Tunable Nanosupramolecular Aggregates Mediated by Host-Guest Complexation.

Nanosupramolecular assemblies with controlled topological features have inventive applications in fundamental studies and material manufacturing. Herein, a variety of morphologically interesting aggregates have been constructed using the supramolecular modulation with bipyridinium-modified diphenylalanine derivative (BP-FF). Benefiting from the high binding affinity of bipyridinium group with four different macrocyclic receptors, namely cucurbit[7]uril, cucurbit[8]uril, pillar[5]arene, and tetrasulfonated crown ether, we have succeeded in tuning the topological aggregates of BP-FF from fine nanofibers to nanorods, octahedron-like nanostructure, helical nanowires, and rectangular nanosheets without any tedious chemical modification. This supramolecular approach may provide us a powerful method to construct well-defined nanostructures with different morphologies that can be conveniently controlled by facile host-guest interactions.

[Effects of Rapamycin and Rapamycin-loaded Poly(lactic-co-glycolic)Acid Nanoparticles on Apoptosis and Expression of bcl-2 and p27(kip1) Proteins of Human Umbilical Arterial Vascular Smooth Muscle Cell].

OBJECTIVE: To investgate the effects of rapamycin(RPM)and RPM-loaded poly(lactic-co-glycolic)acid(PLGA)nanoparticles(NPs)on the apoptosis of human umbilical arterial vascular smooth muscle cells(HUASMCs)in vitro and expression of bcl-2 and p27(kip1) protein. METHODS: HUASMCs were cultured in vitro and divided to RPM and RPM-PLGA-NPs groups treated at 3 different concentration by 12 and 24 hours,with M231-smooth muscle growth supplements medium and null-PLGA-NPs treated groups as controlled. The apoptosis of HUASMCs was determined by terminal deoxynucleotidyl transferase-mediated deoxyuridine triphosphate nick end labeling staining and flow cytometry. The expressions of bcl-2 and p27(kip1) were detected by streptacidin/peroxidase immunohistochemical method. The effect on cellular proliferation was assessed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromidecolorimetry. RESULTS: The proliferation of HUASMCs was inhibited by RPM and RPM-PLGA-NPs in a dose-dependent manner. DNA electrophoresis showed DNA ladder in RPM and RPM-PLGA-NPs groups and classical scalar strips in control groups. The apoptotic indexes of RPM 100 ng/ml group and RPM-PLGA-NPs 500 ng/ml group detected by flow cytometry were(45.45<2.36)% and(35.04<5.64)%,respectively,which were significantly higher than that of M231-smooth muscle growth supplements control group [(2.60<0.95)%,all P<0.01]. The apoptotic indexes of groups incubated with RPM and RPM-PLGA-NPs for 24 hours were significantly higher than those of groups which incubated for 12 hours(P<0.05,P<0.01). The positive expression indexes(PEI)of p27(kip1) and bcl-2 protein were higher in RPM and RPM-PLGA-NPs groups than that of control groups. The Spearman's rank correlation coefficient test showed that there was no significant correlation between the PEI of p27(kip1) and the apoptotic indexes in the RPM group and RPM-PLGA-NPs group(P>0.05). CONCLUSIONS: Rapamycin-loaded PLGA nanoparticles and rapamycin have similar effects in inhibiting proliferation and inducing apoptosis;meanwhile,they upregulate the expression of p27(kip1) protein without downregulating the expression of bcl-2 protein in HUASMCs in vitro. RPM-PLGA-NPs has more potent pro-apoptotic effect than equivalent dose of RPM but is not linearly correlated with the p27(kip1) expression level.

[Spectrum diagnostics for the time of pre-sputtering in thin films deposited by magnetron puttering].

Abstract A plasma analysis system comprised of Omni-X300 series grating spectrometer, CCD data acquisition system and optical fiber transmission system was utilized in the present paper to realize the real-time acquisition of plasma emission spectra during the process of radio frequency (RF) magnetron sputtering. The plasma emission spectra produced by NiTa, TiAl ceramic targets and NiA1, TiA1 alloy targets were monitored respectively, in addition, the behavior of analysis lines of Ta I 333.991 nm, Ni I 362.473 nm, Al I 396.153 nm and Ti I 398.176 nm with time was obtained, according to which the time of pre-sputtering of the four kinds of target materials was fixed. At the same time, for the TiAl alloy target as the research object, the influence of different powers and pressures on the time of pre-sputtering was studied.

Design, synthesis, and insecticidal activities of phthalamides containing a hydrazone substructure.

Fluobendiamide is the first commercialized artificial synthetic insecticide acting on the ryanodine receptor. This new molecule possesses a combination of excellent insecticidal activity and eco-friendly characteristics with a skeleton structure of phthalamide. In this study, we incorporated hydrazone, present in many pesticidal compounds reported during the last two decades, into phthalamide derivatives via Schiff-base condensation and aminolysis to obtain 21 new compounds; these compounds were characterized by proton nuclear magnetic resonance ((1)H NMR), infrared spectroscopy (IR), and high-resolution mass spectrometry (HRMS) or elemental analysis. A preliminary bioassay against peach aphids ( Myzus persicae ) revealed that the title compounds exhibited good stomach toxicity at 600 mg/L. Twelve new compounds were found to display higher activity than postive control flubendiamide (LC(50) = 184.099 mg/L), however, LC(50) was less than 100 mg/L only for compounds 4e, 4o, 4s, 4t (59-77 mg/L). That is, combinations of a p-fluorophenyl or (methyl)thienyl group at the Ar position with an isopropyl or cyclohexyl group at the R position might improve the lethality of the designed phthalamide derivative. Preliminary results of a bioassay at 600 mg/L against diamondback moth ( Plutella xylostella , Linnaeus) showed that only the title compound 4e possessed good larvicidal activity. On comparison of the bioassay results of stomach toxicity and larvicidal activity, it is noteworthy that the compound incorporating phenylpyrazolyl exhibited good larvicidal activity and poor stomach activity.

[Spectrum diagnostics for optimization of experimental parameters in thin films deposited by magnetron sputtering].

The plasma emission spectra generated during the deposition process of Si-based thin films by radio frequency (RF) magnetron sputtering using Cu and Al targets in an argon atmosphere were acquired by the plasma analysis system, which consists of a magnetron sputtering apparatus, an Omni-lambda300 series grating spectrometer, a CCD data acquisition system and an optical fiber transmission system. The variation in Cu and Al plasma emission spectra intensity depending on sputtering conditions, such as sputtering time, sputtering power, the target-to-substrate distance and deposition pressure, was studied by using the analysis lines Cu I 324. 754 nm, Cu I 327. 396 nm, Cu I 333. 784 nm, Cu I 353. 039 nm, Al I 394. 403 nm and Al I 396. 153 nm. Compared with the option of experimental parameters of thin films deposited by RF magnetron sputtering, it was shown that emission spectra analysis methods play a guiding role in optimizing the deposition conditions of thin films in RF magnetron sputtering.