Comparative Study of Polymer-Grafted BaTiO3 Nanoparticles Synthesized Using Normal ATRP as Well as ATRP and ARGET-ATRP with Sacrificial Initiator with a Focus on Controlling the Polymer Graft Density and Molecular Weight.

Structurally well-defined polymer-grafted nanoparticle hybrids are highly sought after for a variety of applications, such as antifouling, mechanical reinforcement, separations, and sensing. Herein, we report the synthesis of poly(methyl methacrylate) grafted- and poly(styrene) grafted-BaTiO3 nanoparticles using activator regeneration via electron transfer (ARGET ATRP) with a sacrificial initiator, atom transfer radical polymerization (normal ATRP), and ATRP with sacrificial initiator, to understand the role of the polymerization procedure in influencing the structure of nanoparticle hybrids. Irrespective of the polymerization procedure adopted for the synthesis of nanoparticle hybrids, we noticed PS grafted on the nanoparticles showed moderation in molecular weight and graft density (ranging from 30,400 to 83,900 g/mol and 0.122 to 0.067 chain/nm2) compared to PMMA-grafted nanoparticles (ranging from 44,620 to 230,000 g/mol and 0.071 to 0.015 chain/nm2). Reducing the polymerization time during ATRP has a significant impact on the molecular weight of polymer brushes grafted on the nanoparticles. PMMA-grafted nanoparticles synthesized using ATRP had lower graft density and considerably higher molecular weight compared to PS-grafted nanoparticles. However, the addition of a sacrificial initiator during ATRP resulted in moderation of the molecular weight and graft density of PMMA-grafted nanoparticles. The use of a sacrificial initiator along with ARGET offered the best control in achieving lower molecular weight and narrow dispersity for both PS (37,870 g/mol and PDI of 1.259) and PMMA (44,620 g/mol and PDI of 1.263) nanoparticle hybrid systems.

Tetrahydroxydiboron-Mediated Palladium-Catalyzed Transfer Hydrogenation and Deuteriation of Alkenes and Alkynes Using Water as the Stoichiometric H or D Atom Donor.

There are few examples of catalytic transfer hydrogenations of simple alkenes and alkynes that use water as a stoichiometric H or D atom donor. We have found that diboron reagents efficiently mediate the transfer of H or D atoms from water directly onto unsaturated C-C bonds using a palladium catalyst. This reaction is conducted on a broad variety of alkenes and alkynes at ambient temperature, and boric acid is the sole byproduct. Mechanistic experiments suggest that this reaction is made possible by a hydrogen atom transfer from water that generates a Pd-hydride intermediate. Importantly, complete deuterium incorporation from stoichiometric D2O has also been achieved.

Diruthenium-polyyn-diyl-diruthenium wires: electronic coupling in the long distance regime.

Reported herein is a series of Ru2(Xap)4 capped polyyn-diyl compounds, where Xap is either 2-anilinopyridinate (ap) or its aniline substituted derivatives. Symmetric [Ru2(Xap)4](µ-C4k)[Ru2(Xap)4] (compounds 4ka (X = 3-isobutoxy) and 4kc (X = 3,5-dimethoxy) with k = 2, 3, 4, and 5) was obtained from the Glaser coupling reaction of Ru2(Xap)4(C2kH). Unsymmetric [Ru2(Xap)4](µ-C(4k+2))[Ru2(ap)4] (compounds 4k+2b with k = 2, 3, and 4) were prepared from the Glaser coupling reaction between Ru2(Xap)4(C(2k+2)H) and Ru2(ap)4(C2kH). X-ray diffraction study of compound 12c revealed both the sigmoidal topology of the polyyn-diyl bridge and the fine structural detail about the Ru2 cores. Cyclic and differential pulse voltammetric (CV and DPV) measurements and spectroelectrochemical studies revealed that (i) the reduced monoanions [Ru2-C2m-Ru2](-1) (m = 4-8) belong to the Robin-Day class II mixed valent ions and (ii) the electronic coupling between Ru2 termini depends on the length of the polyyn-diyl bridge with an attenuation constant (γ) between 0.12 and 0.15 Å(-1). In addition, spin-unrestricted DFT calculations provide insight about the nature of orbitals that mediate the long distance electronic coupling.

Attachment of a diruthenium compound to Au and SiO2/Si surfaces by "click" chemistry.

Fabrication of electrodes with functionalized properties is of interest in many electronic applications with the surface impacting the electrical and electronic properties of devices. We report the formation of molecular monolayers containing a redox-active diruthenium(II,III) compound to gold and silicon surfaces via "click" chemistry. The use of Cu-catalyzed azide-alkyne cycloaddition enables modular design of molecular surfaces and interfaces and allows for a variety of substrates to be functionalized. Attachment of the diruthenium compound is monitored by using infrared and photoelectron spectroscopies. The highest occupied molecular (or system) orbital of the "clicked-on" diruthenium is clearly seen in the photoemission measurements and is mainly attributed to the presence of the Ru atoms. The "click" attachment is robust and provides a route to investigate the evolution of the electronic structure and properties of novel molecules attached to a variety of electrodes. The ability to attach this redox-active Ru molecule onto SiO2 and Au surfaces is important for the development of functional molecular devices such as charge-based memory devices.

Diruthenium(III,III) ethynyl-phenyleneimine molecular wires: preparation via on-complex Schiff base condensation.

The diruthenium compound trans-Ru(2)(DMBA)(4)(C≡C-C(6)H(4)-4-CHO)(2) (1; DMBA is N,N'-dimethylbenzamidinate) was prepared from the reaction between Ru(2)(DMBA)(4)(NO(3))(2) and HC≡C-C(6)H(4)-4-CHO under the weak base conditions. The aldehyde groups of 1 undergo a condensation reaction with NH(2)C(6)H(4)-4-Y (Y = H and NH(2)) to afford new compounds trans-Ru(2)(DMBA)(4)(C≡C-C(6)H(4)-4-CH═N-C(6)H(4)-4'-Y)(2) (Y = H (2) and NH(2) (3)). A related compound, Ru(2)(DMBA)(4)(C≡C-C(6)H(4)-4-N═C(Me)Fc)(2) (4), was also prepared from the reaction between Ru(2)(DMBA)(4)(NO(3))(2) and HC≡C-C(6)H(4)-N═C(Me)Fc. X-ray structural studies of compounds 1 and 2 revealed significant deviation from an idealized D(4h) geometry in the coordination sphere of the Ru(2) core. Voltammetric measurements revealed four one electron redox processes for compounds 1-3: the Ru(2) centered oxidation and reduction, and a pair of reductions of the imine or aldehyde groups. Compound 4 displays an additional oxidation attributed to the Fc groups. DFT calculations were performed on model compounds to gain a more thorough understanding of the interaction of the organic functional groups across the diruthenium bridge.

A metal-organic framework via the reaction of benzoate with a cationic inorganic material.

Our research group previously reported a two-dimensional cationic inorganic material (BING-5, Pb(3)F(5)NO(3)) where nitrate resides in the interlamellar space and can be anion exchanged. Investigation of the possible exchange of nitrate for benzoate led to the discovery of a layered metal-organic framework, lead benzoate hydrate [Pb(C(6)H(5)CO(2))(2)(OH(2))]. The compound crystallizes as colourless plates in the monoclinic space group P2(1)/c. The two dimensional lead-oxygen layers contain bridging benzoate oxygen atoms, with bridging water molecules further supporting the layers. The benzoate molecules are positioned perpendicular to the layers and form a hydrophobic bilayer region. The material shows basic character when immersed in various solvents suggesting potential as a base catalyst.