RESUMO
Orodispersible film (ODF) is an innovative dosage form used to administer drugs and nutrients, designed to disintegrate or dissolve in the oral cavity without needing water. One of the advantages of ODF is that it is suitable for administration in older people and children who have difficulty swallowing because of psychological or physiological deficiencies. This article describes the development of an ODF based on maltodextrin, which is easy to administer, has a pleasant taste, and is suitable for iron supplementation. An ODF containing 30 mg of iron as pyrophosphate and 400 µg of folic acid (iron ODF) was developed and manufactured on an industrial scale. The kinetic profile for serum iron and folic acid upon consumption of ODF compared with a Sucrosomial® iron capsule (known for its high bioavailability) was evaluated in a crossover clinical trial. The study was conducted in nine healthy women, and the serum iron profile (AUC0-8, Tmax, and Cmax) of both formulations was defined. Results showed that the rate and extent of elemental iron absorption with iron ODF was comparable to that obtained using the Sucrosomial® iron capsule. These data represent the first evidence of iron and folic acid absorption concerning the newly developed ODF. Iron ODF was proven to be a suitable product for oral iron supplementation.
RESUMO
Orodispersible film (ODF) is a new dosage form that disperses rapidly in the mouth without water or swallowing. The main ingredient of an ODF is a polymer that can be both of natural or synthetic origin. Maltodextrin is a natural polymer, mainly used in pharmaceutical and nutraceutical fields. This review aims to examine the literature regarding ODFs based on maltodextrin as the platform for developing new products for therapeutical application. ODFs based on maltodextrin contain plasticizers that enhance their flexibility and reduce their brittleness. Surfactants; fillers, such as homopolymer and copolymer of vinylacetate; flavour and sweetener were introduced to improve ODF characteristics. Both water-soluble and insoluble APIs were introduced up to 100 mg per dosage unit. The solvent casting method and hot-melt extrusion are the most useful techniques for preparing ODFs. In particular, the solvent casting method allows manufacturing processes to be developed from a lab scale to an industrial scale. ODFs based on maltodextrin are characterized in terms of mechanical properties, dissolution rate, taste and stability. ODFs made of maltodextrin, developed by IBSA, were tested in vivo to evaluate their bioequivalence and efficacy and were demonstrated to be a valid alternative to the marketed oral dosage forms.
RESUMO
BACKGROUND AND OBJECTIVE: An orally disintegrating film (ODF) formulation of vitamin D3 that dissolves rapidly in the mouth without drinking or chewing may be a worthwhile alternative to currently available drug products for therapeutic vitamin D supplementation. This study aimed to compare the bioavailability of a single dose of a vitamin D3 25000 I.U. ODF with those of a marketed oral vitamin D3 preparation in healthy subjects. METHODS: This Phase 1, randomised, parallel-group, open-label study compared the pharmacokinetics of calcifediol [25(OH)D3], the precursor of bioactive vitamin D3, after a single dose of a new vitamin D3 25,000 I.U. ODF with those of a Reference formulation (vitamin D3 25000 I.U./2.5 mL oral solution) in healthy adult subjects using a validated liquid chromatography-tandem mass spectrometry (LC-MS/MS) assay. The primary objective was bioavailability under fed conditions, defined as maximum plasma concentration (Cmax) of 25(OH)D3 and area under the concentration-time curve from time zero to time t, the last quantifiable concentration (AUC0-t). The pharmacokinetics of 25(OH)D3 were also evaluated following the ODF administration under fasting conditions. Subjects were randomised to receive a single dose of the vitamin D3 25000 I.U. ODF or the Reference oral solution under fed conditions or the vitamin D3 ODF under fasting conditions. RESULTS: Forty-eight healthy subjects were randomised and completed the study. Overall, the pharmacokinetic profile was very similar across the three treatment groups, and bioavailability did not significantly differ among treatments. Under fed conditions, mean 25(OH)D3 plasma values for Cmax were 6.68 ± 2.03 versus 6.61 ± 2.62 ng/mL for the Test versus Reference formulations. Corresponding values for AUC0-t were 2364.80 ± 1336.97 versus 2150.52 ± 1622.76 ng/mL × h. Mean Cmax was slightly lower (6.68 ± 2.03 vs 7.23 ± 1.48 ng/mL) and the time to reach peak concentration was delayed (144 h [36-312] versus 42 h (2-480]) with the ODF under fed versus fasting conditions (p = 0.0371). The point estimates and 90 % CIs of the Testfed/Referencefed ratios of the geometric means showed that the bioavailability of exogenous 25(OH)D3 was, both in rate and extent of absorption, slightly higher with the vitamin D3 ODF than the vitamin D3 oral solution under the administration conditions recommended for the vitamin D3 oral solution. Palatability and ease of use of the ODF were satisfactory. CONCLUSION: The new ODF 25000 I.U. formulation provided a valuable alternative to the marketed oral solution for therapeutic vitamin D supplementation, with a bioavailability that was slightly higher than that of the vitamin D3 oral solution administered under the same conditions. TRIAL REGISTRATION: The study was retrospectively registered with the ISRCTN Registry (Registry code: ISRCTN13208948) on 27 November 2020.
Assuntos
Colecalciferol , Espectrometria de Massas em Tandem , Administração Oral , Adulto , Área Sob a Curva , Disponibilidade Biológica , Cromatografia Líquida , Estudos Cross-Over , Jejum , Voluntários Saudáveis , Humanos , Comprimidos , Equivalência TerapêuticaRESUMO
Vitamin D plays a crucial and very well-known role in regulation of calcium homeostasis and bone metabolism and mineralization. However, a huge and more recent body of evidence supports the positive influence of vitamin D on the regulation of immune response, ranging from protection against respiratory tract infections to prevention and management of asthma. Nevertheless, vitamin D deficiency is a very common condition and there is an increasing need for suitable products for proper supplementation, allowing good compliance also in specific populations. Orally disintegrating tablets (ODT) were first developed to overcome the difficulty experienced by pediatric and geriatric patients of swallowing traditional oral dosage forms and, recently, orodispersible films (ODF) are gaining popularity as novel dosage form for assuming active pharmaceutical ingredients, vitamins, and ingredients for food supplements. This study describes a 2000 IU Vitamin D3 ODF for daily intake, consisting of hydrophilic polymers and suitable excipients, manufactured by film-casting process. Elongation-at-break (E%), Young's modulus (Y), and tensile strength (TS) were investigated using a dynamometer. Chemical stability was evaluated assaying the vitamin D3 in the films stored at different environmental conditions. In addition, in vitro disintegration and dissolution studies were performed. Correlation existed between the mechanical properties of the film and the residual water, acting as plasticizer. The stability study showed that vitamin D3 assay was ≥90% also after 3 months at 40 °C. The film disintegrated in less than 1 min and the vitamin D3 released was ≥75% after 15 min. An ODF with suitable properties can be manufactured and used as innovative dosage form for vitamin D3 food supplements.
Assuntos
Química Farmacêutica/métodos , Colecalciferol/administração & dosagem , Suplementos Nutricionais , Filmes Comestíveis , Administração Oral , Asma/tratamento farmacológico , Colecalciferol/química , Composição de Medicamentos , Desenho de Fármacos , Liberação Controlada de Fármacos , Módulo de Elasticidade , Escherichia coli/metabolismo , Excipientes/química , Humanos , Derivados da Hipromelose/química , Plastificantes/química , Polímeros/química , Solubilidade , Estresse Mecânico , Comprimidos , Temperatura , Resistência à Tração , Deficiência de Vitamina D/tratamento farmacológico , Água/químicaRESUMO
A new orodispersible film formulation of the phosphodiesterase type 5 inhibitor, sildenafil, has been developed to examine the advantages of an orally disintegrating film formulation and provide an alternative to the current marketed products for the treatment of erectile dysfunction. The pharmacokinetics of the sildenafil 100 mg orodispersible film (IBSA) was compared to that of the conventional marketed 100 mg film-coated tablet (Viagra®) after single-dose administration to 53 healthy male volunteers (aged 18-51 years) in a randomized, open, two-way crossover bioequivalence study. Each subject received a single oral dose of 100 mg of sildenafil as test or reference formulation administered under fasting conditions at each of the two study periods according to a randomized crossover design. There was a washout interval of ≥7 days between the two administrations of the investigational medicinal products. Blood samples for pharmacokinetic analysis were collected up to 24 h post-dosing. The primary objective was to compare the rate (peak plasma concentration; Cmax) and extent (area under the curve [AUC] from administration to last observed concentration time; AUC0-t) of sildenafil absorption after single-dose administration of test and reference. Secondary endpoints were observed to describe the plasma pharmacokinetic profiles of sildenafil and its metabolite N-desmethyl-sildenafil relative bioavailability and safety profile after single-dose administration. The mean sildenafil and N-desmethyl-sildenafil plasma concentration-time profiles up to 24 h after single-dose administration of sildenafil 100 mg orodispersible film and film-coated tablet were nearly superimposable. The bioequivalence test was fully satisfied for sildenafil and N-desmethyl-sildenafil in terms of rate and extent of bioavailability. Adverse events occurred at similar rates for the two formulations and were of mild-to-moderate severity. The results suggest that the new orodispersible film formulation can be used interchangeably with the conventional film-coated formulation.
Assuntos
Composição de Medicamentos , Inibidores da Fosfodiesterase 5/farmacocinética , Citrato de Sildenafila/farmacocinética , Administração Oral , Adolescente , Adulto , Relação Dose-Resposta a Droga , Voluntários Saudáveis , Humanos , Masculino , Pessoa de Meia-Idade , Inibidores da Fosfodiesterase 5/administração & dosagem , Citrato de Sildenafila/administração & dosagem , Comprimidos/administração & dosagem , Comprimidos/uso terapêutico , Equivalência Terapêutica , Adulto JovemRESUMO
This study explored the effect of aminoacids as non-traditional plasticizers of maltodextrins fast dissolving films. 5% w/w glycine and proline decreased the glass transition temperature (Tg) of maltodextrins from 102.6±2.0°C to 73.1±1.4°C and 76.1±0.7°C, respectively; meanwhile the binary mixture made with lysine had a Tg value of 83.6±2.2°C. At the same time, all aminoacids increased the ΔCp values. The shift of the thermal data were due to profound effect on the hydrogen bonding as evidenced by ATR-FTIR spectra since the OH stretching and scissoring bands decreased of about 15-26 cm(-1). A linear relationship was found (R(2)=0.9334) between HOH scissoring wavenumbers and Tg values. The addition of glycine and proline resulted effective in reducing the elastic modulus (about 50%) and tensile strength (about three times) and, therefore, can be used to increase the film ductility.
Assuntos
Glicina/química , Lisina/química , Plastificantes/química , Polissacarídeos/química , Prolina/química , Varredura Diferencial de Calorimetria , Módulo de Elasticidade , Ligação de Hidrogênio , Solubilidade , Espectroscopia de Infravermelho com Transformada de Fourier , Resistência à Tração , TermogravimetriaRESUMO
CONTEXT: The selection of a proper taste-masking agent (TMA) is a critical issue in the development of fast-dissolving films containing bitter drugs. OBJECTIVE: This work is aimed to evaluate the suppression of the bitter taste of a maltodextrin fast-dissolving film loaded with 13.4 mg sodium diclofenac (DS) by adding TMAs. METHODS: The films were prepared by casting and drying aqueous mixtures of maltodextrin (DE = 6), glycerin, sorbitan oleate, and DS. Films were characterized in terms of thickness, tensile properties, film disintegration time, and drug dissolution time. The bitterness intensity of DS and the masking effect of TMAs were evaluated by an electronic tongue. RESULTS: The 'mint' and 'licorice' flavors and sucralose mixture resulted appropriate to mask DS bitterness as confirmed by a panel of volunteers. The addition of these TMAs did not significantly affect the film disintegration time (15-20 seconds) and DS dissolution rate (about 5 minutes). CONCLUSION: The electronic tongue was allowed to discriminate the effect of the TMA also in the presence of other hydrosoluble constituents of the film. Therefore, because of its simplicity and rapidity, this technique could assist or even replace the sensory evaluation in the development of fast-dissolving films.
Assuntos
Anti-Inflamatórios não Esteroides/administração & dosagem , Anti-Inflamatórios não Esteroides/química , Diclofenaco/administração & dosagem , Diclofenaco/química , Aromatizantes/química , Polissacarídeos/química , Tecnologia Farmacêutica/métodos , Administração através da Mucosa , Formas de Dosagem , Composição de Medicamentos , Sistemas de Liberação de Medicamentos , Eletrônica , Humanos , Solubilidade , Paladar , Resistência à Tração , LínguaRESUMO
This work aimed to develop a fast-dissolving film made of low dextrose equivalent maltodextrins (MDX) containing nicotine hydrogen tartrate salt (NHT). Particular attention was given to the selection of the suitable taste-masking agent (TMA) and the characterisation of the ductility and flexibility under different mechanical stresses. MDX with two different dextrose equivalents (DEs), namely DE 6 and DE 12, were selected in order to evaluate the effect of polymer molecular weight on film tensile properties. The bitterness and astringency intensity of NHT and the suppression effect of several TMA were evaluated by a Taste-Sensing System. The films were characterised in term of NHT content, tensile properties, disintegration time and drug dissolution test. As expected, placebo films made of MDX DE 6 appeared stiffer and less ductile than film prepared using MDX DE 12. The films disintegrated within 10 s. Among the tested TMA, the milk and mint flavours resulted particularly suitable to mask the taste of NHT. The addition of NHT and taste-masking agents affected film tensile properties; however, the effect of the addition of these components can be counterweighted by modulating the glycerine content and/or the MDX molecular weight. The feasibility of NHT loaded fast-dissolving films was demonstrated.
Assuntos
Sistemas de Liberação de Medicamentos , Aromatizantes/química , Nicotina , Polissacarídeos/química , Administração Oral , Química Farmacêutica , Formas de Dosagem , Composição de Medicamentos , Estudos de Viabilidade , Peso Molecular , Nicotina/administração & dosagem , Nicotina/química , Polímeros/química , Solubilidade , Paladar , Resistência à TraçãoRESUMO
This work aimed to study maltodextrins (MDX) with a low dextrose equivalent as film forming material and their application in the design of oral fast-dissolving films. The suitable plasticizer and its concentration were selected on the basis of flexibility, tensile strength and stickiness of MDX films, and the MDX/plasticizer interactions were investigated by ATR-FTIR spectroscopy. Flexible films were obtained by using 16-20% w/w glycerin (GLY). This basic formulation was adapted to the main production technologies, casting and solvent evaporation (Series C) or hot-melt extrusion (Series E), by adding sorbitan monoleate (SO) or cellulose microcrystalline (MCC), respectively. MCC decreased the film ductility and significantly affected the film disintegration time both in vitro and in vivo (Series C<10s; Series E approximately 1min). To assess the film loading capacity, piroxicam (PRX), a water insoluble drug, was selected. The loading of a drug as a powder decreased the film ductility, but the formulation maintained satisfactory flexibility and resistance to elongation for production and packaging procedures. The films present a high loading capacity, up to 25mg for a surface of 6cm(2). The PRX dissolution rate significantly improved in Series C films independently of the PRX/MDX ratio.