Human fibroblast and human bone marrow cell response to lithographically nanopatterned adhesive domains on protein rejecting substrates.

The separate influence of topographical and chemical cues on cell attachment and spreading are well documented; however, that of duel-cue substrates is less so. In this study graft copolymers that sterically stabilize biological surfaces were employed alongside nanotopographical features fabricated by colloidal lithography. This resulted in the production of a range of substrates whereby the effect of chemistry and or topography on both on human fibroblast and bone marrow cell adhesion and spreading could be observed. The current studies indicate an enhancement of cell response as a consequence of modifications in material topography, whereas the current selected chemical cues inhibited cell function. Critically, in combination, topography modulated the effects of chemical environment.

Is surface chemical composition important for orthopaedic implant materials?

Ti-6Al-7Nb (NS) in its 'standard' implant form has been previously shown to be detrimental to fibroblast growth and colonisation on its surface. Specific aspects of the NS topography have been implicated, however, the contribution of its unique surface chemistry to the cell behaviour was unknown. By evaporating either gold or titanium on the surface of standard NS, two different model surface chemistries could be studied with the same characteristic standard NS topography. Two other 'standard' orthopaedic topographies, that of stainless steel (SS) and of 'commercially pure' titanium (TS) were also treated in a similar manner. All materials elicited behaviour similar to their uncoated counterparts. For coated SS and TS, cell proliferation was observed, cells were well spread and displayed mature focal adhesion sites, and associated cytoskeletal components. For coated NS, cell proliferation was compromised, cells remained rounded, filopodia attached and seemed to probe the surface, especially the beta -phase particles, and both the focal adhesion sites and the microtubule network were disrupted by the presence of these particles. These results confirmed, that in the instance of NS, the topography was the primary cause for the observed stunted cell growth. For biomaterials studies, the standardisation of surface chemistry used here is a valuable tool in allowing vastly different materials and surface finishes to be compared solely on the basis of their topography.

Nuclear localization of HIV-1 tat functionalized gold nanoparticles.

The impermeable nature of the cell plasma membrane limits the therapeutic uses of many macromolecules and there is therefore a growing effort to circumvent this problem by designing strategies for targeted intracellular delivery. During the last decade several cell penetrating peptides, such as the HIV-1 tat peptide, have been shown to traverse the cell membrane, where integral protein transduction domains (PTDs) are responsible for their cellular uptake, and to reach the nucleus while retaining biological activity. It has since been discovered that PTDs can enable the cellular delivery of conjugated biomolecules and even nanoparticles, but nuclear delivery has remained problematic. This present study focuses on the development of water soluble, biocompatible gold nanoparticles of differing size functionalized with the HIV-1 tat PTD with the aim of producing nuclear targeting agents. The particles were subsequently tested in vitro with a human fibroblast cell line, with results demonstrating successful nanoparticle transfer across the plasma membrane, with 5 nm particles achieving nuclear entry while larger 30 nm particles are retained in the cytoplasm, suggesting entry is blocked via nuclear pores dimensions.

Comment on "Nanorobotics control design: a collective behavior approach for medicine".

The limitations on nanorobot design and activity imposed by Brownian motion events, communication problems, and the nature of the intercellular space are discussed. It is shown that severe problems exist for a nanorobot designed to enter tissues for therapeutic purposes when it is smaller than about 1 microm in any one of its dimensions.

Articular chondrocyte passage number: influence on adhesion, migration, cytoskeletal organisation and phenotype in response to nano- and micro-metric topography.

The isolation and culture of articular chondrocytes is a prerequisite of their use in tissue engineering, but prolonged culture and passaging is associated with de-differentiation. In this paper we studied the influence of nanometric and micrometric grooves (85 nm to 8 microm in depth and 2 microm to 20 microm in width) on 1st and 2nd passage ovine chondrocytes since our earlier findings indicate that primary cells are not affected by such features. 1st and 2nd passage chondrocytes cultured on grooved substrata showed a polarisation of cell shape parallel to the groove long axis and F-actin condensations were evident at groove ridge boundaries. An increase in cell migration with increasing groove depth was observed. Both passages of chondrocytes maintained type II collagen expression, but to a lesser degree in 2nd. This study demonstrates that passage number alters the response of chondrocytes to micrometric and nanometric topography, and could be important in ex vivo cartilage engineering.

The response of primary articular chondrocytes to micrometric surface topography and sulphated hyaluronic acid-based matrices.

Understanding the response of chondrocytes to topographical cues and chemical patterns could provide invaluable information to advance the repair of chondral lesions. We studied the response of primary chondrocytes to nano- and micro-grooved surfaces, and sulphated hyaluronic acid (HyalS). Cells were grown on grooves ranging from 80 nm to 9 microm in depth, and from 2 microm to 20 microm in width. Observations showed that the cells did not spread appreciably on any groove size, or alter morphology or F-actin organization, although cells showed accelerated movement on 750 nm deep grooves in comparison to flat surfaces. On chemical patterns, the cells migrated onto, and preferentially attached to, HyalS and showed a greater degree of spreading and F-actin re-arrangement. This study shows that 750 nm deep grooves and sulphated hyaluronic acid elicit responses from primary chondrocytes, and this could have implications for the future direction of cartilage reconstruction and orthopaedic treatments in general.

An in vivo microfabricated scaffold for tendon repair.

A new type of in vivo tissue engineering system for tendon repair in situ after cut or crush of a flexor tendon is described. The system is based on the topographical reaction, alignment, migration and perhaps proliferation of tendon cells on micrometrically grooved substrates made in a biodegradable polymer. Macrophage trapping in the structure may also help to prevent inflammation. Tendon damage including crush and section injury is a fairly frequent occurrence. The conventional treatment is surgical repair, however frequently this leads, especially in hand wounds, to attachment of the tendon surface to the surrounding synovium, which is very undesirable. We present an approach based on using a biodegradable device to ensure that the healing of severed or crushed flexor tendons is aided, synovial adhesion prevented and the final result anatomically correct. The biodegradable sheath carries microgrooves fabricated into the polymer by embossing that orient and guide the cells towards each other from either side of the region of damage. After six weeks an apparently normal functional tendon is reformed.

Morphological and microarray analysis of human fibroblasts cultured on nanocolumns produced by colloidal lithography.

The environment around a cell during in vitro culture is unlikely to mimic those in vivo. Preliminary experiments with nanotopography have shown that nanoscale features can strongly influence cell morphology, adhesion, proliferation and gene regulation, but the mechanisms mediating this cell response remain unclear. In this study a well defined nanotopography, consisting of 100 nm wide and 160 nm high cylindrical columns, was used in fibroblast culture. In order to build on previously published morphological data that showed changes in cell spreading on the nanocolumns, in this study gene regulation was monitored using a 1718 gene microarray. Transmission electron microscopy, fluorescent observation of actin and Rac and area quantification have been used to re-affirm the microarray observations. The results indicate that changes in cell spreading correlate with a number of gene up- and down-regulations as will be described within the manuscript.

Small is beautiful but smaller is the aim: review of a life of research.

Background and origins of research of Adam Curtis. One persisting theme has been the pursuit of different landscapes at different scales to discover the routes to explain how the body is built. His research life fell in a fortunate period during which techniques and concepts for investigating structure have improved year by year. His most fortunate encounter was with Michael Abercrombie and his views on the social behaviour of cells, aims for quantitation, and statistical testing. Adam worked in various environments--in turn Geology as an undergraduate, Biophysics Ph.D. in a Genetics department and various departments in turn from anatomy via zoology to Cell Biology. Adam started his Ph.D. work in cell adhesion, studying cell movement, trapping and reaggregation phenomena, having an early start from the physico-chemical viewpoint. He made quantitative measurements of cell adhesion by kinetic methods. Interference reflection microscopy (IRM) and related optical interference techniques were brought into the field of biology by him. In turn this led with Chris Wilkinson, a long term colleague, to the use of micro- and nanofabrication for biological research. Polscope and photoelastic measurements were introduced to biology recently in his laboratory. One long term theme has been to map the adhesion of cells to substrates to discover contact areas. Early data came from IRM and then TIRF (Total Internal Reflection Fluorescence Microscopy) and then from Forster Resonance Energy Microscopy (FRET). Another important theme was the time scale that needed to be measured--very short indeed in suspension. This was very difficult and has only become possible very recently but hydrodynamic calculation shows it must be very short. The attractions of the Derjagin-Landau-Verwey-Overbeek theory (DLVO theory) are that they explain many features of biological adhesion. The main test of this theory depends upon the energy of the adhesion at various different separation distances between cell and cell or cell and substrate. Problems with cell adhesion molecules are discussed. Contact guidance of cells by oriented structures and Paul Weiss--Tests with grating replicas suggested that topographic rather than biochemical explanations were applicable. It became clearer later that this was an area of research waiting for microfabrication. Albert Harris influenced me considerably to start thinking about mechanical forces produced by cells. Pulling at cells showed effects on the cytoskeleton and on cell cycle time. Such thoughts led to a microfabricated device for tendon repair. Recent photoelastic measurements with the Polscope have allowed much more detailed analysis of the forces between cells. The interesting results on microfabricated devices led to work on nanostructures. Results led the Glasgow group to consider dimensions of structures and how cells could sense such small objects and questions about why order and size may be important. Differential protein adsorption onto surfaces seems to provide defective explanations of the effects. The results will be discussed in terms of very recent theories of cell interaction and cell signals and possible future developments will be outlined.

Cells react to nanoscale order and symmetry in their surroundings.

Mammalian cells react to microstructured surfaces, but there is little information on the reactions to nanostructured surfaces, and such as have been tested are poorly ordered or random in their structure. We now report that ordered surface arrays (orthogonal or hexagonal) of nanopits in polycaprolactone or polymethylmethacrylate have marked effects in reducing cell adhesion compared with less regular arrays or planar surfaces. The pits had diameters of 35, 75, and 120 nm, respectively, with pitch between the pits of 100, 200, and 300 nm, respectively. The cells appear to be able to distinguish between different symmetries of array. We suggest that interfacial forces may be organized by the nanostructures to affect the cells in the same way as they affect liquid crystal orientations.

Investigating the limits of filopodial sensing: a brief report using SEM to image the interaction between 10 nm high nano-topography and fibroblast filopodia.

Having the ability to control cell behaviour would be of great advantage in tissue engineering. One method of gaining control over cell adhesion, proliferation, guidance and differentiation is use of topography. Whilst it has be known for some time that cells can be guided by micro-topography, it is only recently becoming clear that cells will respond strongly to nano-scale topography. The fact that cells will take cues from their micro- and nano-environment suggests that the cells are in some way 'spatially aware'. It is likely that cells probe the shape of their surroundings using filopodia, and that this initial filopodia/topography interaction may be critical to down-stream cell reactions to biomaterials, or indeed, the extracellular matrix. One intriguing question is how small a feature can cells sense? In order to investigate the limits of cell sensing, high-resolution scanning electron microscopy has been used to simultaneously view cell filopodia and 10 nm high nano-islands. Fluorescence microscopy has also been used to look at adhesion formation. The results showed distinct filopodial/nano-island interaction and changes in adhesion morphology.

Rapid fibroblast adhesion to 27nm high polymer demixed nano-topography.

It is well known that many cell types react strongly to micro-topography. It is rapidly becoming clear than cells will also react to nano-topography. Polymer demixing is a rapid and low-cost chemical method of producing nano-topography. This manuscript investigates human fibroblast response to 27nm high nano-islands produced by polymer demixing. Cell spreading, cytoskeleton, focal adhesion and Rac localisation were studied. The results showed that an initial rapid adhesion and cytoskeletal formation on the islands at 4 days of culture gave way to poorly formed contacts and vimentin cytoskeleton at 30 days of culture.

Nonadhesive nanotopography: fibroblast response to poly(n-butyl methacrylate)-poly(styrene) demixed surface features.

It is becoming clear that cells do not only respond to micrometric scale topography, but may also respond to topography at the nanometric scale. Nano-fabrication methods such as electron beam lithography are, however, expensive and time consuming. Polymer demixing of poly(styrene) and poly(4-bromostyrene) has been found to produce nano-scale islands of reproducible height, and the islands have been previously shown to effect cell events such as adhesion, spreading, proliferation, and differentiation. This study uses demixed poly(styrene) and poly(n-butyl methacrylate) to produce nano-islands with closer packing and narrower widths compared with those previously studied. Observations have been made of morphological and cytoskeletal changes in human fibroblasts interacting with 10- and 50-nm-high islands. The methods used included scanning electron microscopy, fluorescent microscopy, and optical microscopy. The results indicated that the cells do not respond differently to the 10-nm islands compared with planar samples but, in contrast, the 50-nm islands are nonadhesive.

Fibroblast reaction to island topography: changes in cytoskeleton and morphology with time.

In order to develop next-generation tissue engineering materials, the understanding of cell responses to novel material surfaces needs to be better understood. Topography presents powerful cues for cells, and it is becoming clear that cells will react to nanometric, as well as micrometric, scale surface features. Polymer-demixing of polystyrene and polybromostyrene has been found to produce nanoscale islands of reproducible height, and is very cheap and fast compared to techniques such as electron beam lithography. This study observed temporal changes in cell morphology and actin and tubulin cytoskeleton using scanning electron and fluorescence microscopy. The results show large differences in cell response to 95 nm high islands from 5 min to 3 weeks of culture. The results also show a change in cell response from initial fast organisation of cytoskeleton in reaction to the islands, through to lack of cell spreading and low recruitment of cell numbers on the islands.

In vitro reaction of endothelial cells to polymer demixed nanotopography.

The introduction of topography to material surfaces has been shown to strongly affect cell behaviour, and the effects of micrometric surface morphologies have been extensively characterised. Research is now starting to investigate the reaction of cells to nanometric topography. This study used polymer demixing of polystyrene and poly(4-bromostyrene) producing nanometrically high islands, and observed endothelial cell response to the islands. Three island heights were investigated; these were 13, 35 and 95 nm. The cells were seen to be more spread on the manufactured topographies than that on flat surfaces of similar chemistry. Other morphological differences were also noted by histology, fluorescence and scanning electron microscopy, with many arcuate cells noted on the test surfaces, and cytoskeletal alignment along the arcuate features. Of the nanotopographies, the 13 nm islands were seen to give the largest response, with highly spread cell morphologies containing well-defined cytoskeleton.

Effective extra-cellular recording from vertebrate neurons in culture using a new type of micro-electrode array.

We describe the fabrication and use of a new type of extracellular micro-electrode array mounted on a flexible transparent polyimide substrate that can be rapidly moved from one part of a culture of vertebrate neurons (rat nodose) to another, which permits co-culture of glia under the neurons and is easily and rapidly replaceable in the event of damage. The array can be mounted on a micromanipulator and moved into place whenever and wherever recordings with or without stimulation are needed. The basic electrode system consists of 20-30 microm diameter gold electrodes, with or without platinisation, exposed to the cells through openings in the polyimide and joined to the recording or stimulating circuitry through gold tracks embedded in the polyimide. If rigid control over neuron placement has been achieved the patterns of electrodes can be matched to the neuron positions.

Polymer-demixed nanotopography: control of fibroblast spreading and proliferation.

Cell response to nanometric scale topography is a growing field. Nanometric topography production has traditionally relied on expensive and time-consuming techniques such as electron beam lithography. This presents disadvantages to the cell biologist in regard to material availability. New research is focusing on less expensive methods of nanotopography production for in vitro cell engineering. One such method is the spontaneous demixing of polymers (in this case polystyrene and polybromostyrene) to produce nanometrically high islands. This article observes fibroblast response to nanometric islands (13, 35, and 95 nm in height) produced by polymer demixing. Changes in cell morphology, cytoskeleton, and proliferation are observed by light, fluorescence, and scanning electron microscopy. Morphological features produced by cells in response to the materials were selected, and cell shape parameters were measured with shape-recognition software. The results showed that island height could either increase or reduce cell spreading and proliferation in relation to control, with 13-nm islands producing cells with the greatest area and 95 nm islands producing cells with the lowest areas. Interaction of filopodia with the islands could been seen to increase as island size was increased.