Determination of ω-end functionalities in tailored poly(2-alkyl-2-oxazoline)s by liquid chromatography and mass spectrometry.

The in-depth analytical characterization of polymers, in particular regarding intended biomedical applications, is becoming increasingly important to elucidate their structure-property relationships. Specifically, end group analysis of e.g. polymers featuring a 'stealth effect' towards the immune system is of particular importance because of their use in coupling reactions to bioactive compounds. Herein, we established a liquid chromatography (LC) protocol to analyse bicyclo[6.1.0]nonyne-functionalized poly(2-alkyl-2-oxazoline)s (POx)s as promising functional polymers that can be applied in strain-promoted click reactions. This work involved the synthesis of poly(2-methyl-2-oxazoline) (PMeOx) and poly(2-ethyl-2-oxazoline) (PEtOx) by living cationic ring-opening polymerization (CROP) with different molar masses ranging from 2 up to 17.5 kDa and, to our knowledge, the first liquid chromatographic analysis of PMeOx. The developed analytical protocol enables the quantitative determination of post-polymerization reaction sequences with respect to the conversion of the ω-end groups. All synthesized polymers were straightforwardly analysed on a C18-derivatized silica monolithic column under reversed-phase chromatographic conditions with a binary mobile phase gradient comprising a mixture of acetonitrile and water. Subsequent mass spectrometry of collected elution fractions enabled the confirmation of the desired ω-end group functionalities and the identification of synthetic by-products.

PEG-Lipid-PLGA Hybrid Particles for Targeted Delivery of Anti-Inflammatory Drugs.

Hybrid nanoparticles (HNPs) were designed by combining a PLGA core with a lipid shell that incorporated PEG-Lipid conjugates with various functionalities (-RGD, -cRGD, -NH2, and -COOH) to create targeted drug delivery systems. Loaded with a neutral lipid orange dye, the HNPs were extensively characterized using various techniques and investigated for their uptake in human monocyte-derived macrophages (MDMs) using FC and CLSM. Moreover, the best-performing HNPs (i.e., HNP-COOH and HNP-RGD as well as HNP-RGD/COOH mixed) were loaded with the anti-inflammatory drug BRP-201 and prepared in two size ranges (dH ~140 nm and dH ~250 nm). The HNPs were examined further for their stability, degradation, MDM uptake, and drug delivery efficiency by studying the inhibition of 5-lipoxygenase (5-LOX) product formation, whereby HNP-COOH and HNP-RGD both exhibited superior uptake, and the HNP-COOH/RGD (2:1) displayed the highest inhibition.

Targeting of phagolysosomes containing conidia of the fungus Aspergillus fumigatus with polymeric particles.

Conidia of the airborne human-pathogenic fungus Aspergillus fumigatus are inhaled by humans. In the lung, they are phagocytosed by alveolar macrophages and intracellularly processed. In macrophages, however, conidia can interfere with the maturation of phagolysosomes to avoid their elimination. To investigate whether polymeric particles (PPs) can reach this intracellular pathogen in macrophages, we formulated dye-labeled PPs with a size allowing for their phagocytosis. PPs were efficiently taken up by RAW 264.7 macrophages and were found in phagolysosomes. When macrophages were infected with conidia prior to the addition of PPs, we found that they co-localized in the same phagolysosomes. Mechanistically, the fusion of phagolysosomes containing PPs with phagolysosomes containing conidia was observed. Increasing concentrations of PPs increased fusion events, resulting in 14% of phagolysosomes containing both conidia and PPs. We demonstrate that PPs can reach conidia-containing phagolysosomes, making these particles a promising carrier system for antimicrobial drugs to target intracellular pathogens. KEY POINTS: • Polymer particles of a size larger than 500 nm are internalized by macrophages and localized in phagolysosomes. • These particles can be delivered to Aspergillus fumigatus conidia-containing phagolysosomes of macrophages. • Enhanced phagolysosome fusion by the use of vacuolin1 can increase particle delivery.

Effect of Crystallinity on the Properties of Polycaprolactone Nanoparticles Containing the Dual FLAP/mPEGS-1 Inhibitor BRP-187.

Seven polycaprolactones (PCL) with constant hydrophobicity but a varying degree of crystallinity prepared from the constitutional isomers ε-caprolactone (εCL) and δ-caprolactone (δCL) were utilized to formulate nanoparticles (NPs). The aim was to investigate the effect of the crystallinity of the bulk polymers on the enzymatic degradation of the particles. Furthermore, their efficiency to encapsulate the hydrophobic anti-inflammatory drug BRP-187 and the final in vitro performance of the resulting NPs were evaluated. Initially, high-throughput nanoprecipitation was employed for the εCL and δCL homopolymers to screen and establish important formulation parameters (organic solvent, polymer and surfactant concentration). Next, BRP-187-loaded PCL nanoparticles were prepared by batch nanoprecipitation and characterized using dynamic light scattering, scanning electron microscopy and UV-Vis spectroscopy to determine and to compare particle size, polydispersity, zeta potential, drug loading as well as the apparent enzymatic degradation as a function of the copolymer composition. Ultimately, NPs were examined for their potency in vitro in human polymorphonuclear leukocytes to inhibit the BRP-187 target 5-lipoxygenase-activating protein (FLAP). It was evident by Tukey's multi-comparison test that the degree of crystallinity of copolymers directly influenced their apparent enzymatic degradation and consequently their efficiency to inhibit the drug target.

On the identification and quantification of proton-initiated species in the synthesis of poly(2-alkyl-2-oxazoline)s by high resolution liquid chromatography.

Hydrophilic poly(2-oxazoline)s represent a promising alternative to replace poly(ethylene glycol) in the biomedical field. For that purpose, reliable analytical protocols to confirm identity and quantity of impurities are required. In particular, side products deriving from chain transfer reactions occurring during the cationic ring-opening polymerization and incomplete end-capping processes may be present. The analytical approach must hence be capable of separating polymers according to minor changes regarding their end group. We demonstrate that liquid chromatography, relying on a monolithic C18-modified silica column and isocratic as well as gradient elution using water / acetonitrile mixtures and varying detectors, can accomplish such demanding high resolution separations. Poly(2-ethyl-2-oxazoline)s (PEtOx) with acetyl, hydroxyl, and phthalimide ω-end groups were investigated. Identification of side products was achieved through coupling with electrospray ionization mass spectrometry. UV / Vis detection was applied to quantify chain transfer products in PEtOx comprising biphenyl moieties. In addition, gradient elution enabled the separation of PEtOx into macromolecules according to their specific degrees of polymerization in molar mass ranges around 2,000 g mol-1.

Straightforward Access to Glycosylated, Acid Sensitive Nanogels by Host-Guest Interactions with Sugar-Modified Pillar[5]arenes.

The introduction of specific targeting units to polymer nanogels usually requires tedious chemical modifications, which limits flexibility in the design of combinatorial approaches. Here, we present a straightforward and versatile method to reversibly introduce various carbohydrate-based targeting units to a pH-sensitive nanogel via host-guest interactions. Glucose-, mannose-, or fructose-modified pillar[5]arenes can adaptably and conveniently be introduced to the surface of the nanogel. Binding studies between these nanogels and the lectin Concanavalin A revealed a high selectivity and strong interaction with only the mannose-modified nanogels. With the addition of other pillar[5]arenes, the interaction can be influenced proving a dynamic exchange of the targeting units. In comparison with common covalent modifications of polymer nanostructures, the presented combination of straightforward precipitation polymerization and supramolecular interactions promises convenient access to adaptable nanostructures for high-throughput screening of targeted delivery systems.

Spherical and Worm-Like Micelles from Fructose-Functionalized Polyether Block Copolymers.

This paper presents the synthesis and characterization of d-fructose modified poly(ethylene glycol) (Fru-PEG) and fructose modified poly(ethylene glycol)-block-poly(ethyl hexyl glycidyl ether) (Fru-PEG-b-PEHG) that are both prepared by initiation with isopropyliden protected fructose, followed by deprotection of the sugar. The block copolymers are self-assembled into micelles, and are subsequently characterized by cryo-TEM and dynamic light scattering. The fluorescent dye Nile red is encapsulated as a model hydrophobic compound and fluorescent marker to perform initial uptake tests with breast cancer cells. The uptake of sugar and nonsugar decorated micelles is compared.

Synthesis of d-fructose conjugated ligands via C6 and C1 and their corresponding [Ru(bpy)2(L)]Cl2 complexes.

A pyridyl triazole (pyta) modified sucrose ligand was prepared in a seven step synthesis using d-glucose as the protection group for d-fructose and starting from commercially available sucrose. After complexation with Ru(bpy)2Cl2 precursor, the sucrose-conjugated Ru complex of the general formula [Ru(bpy)2(L)]Cl2 was formed. Acidic cleavage of the d-glucose unit led to the first d-fructose conjugated metal complex viad-fructose C6 in literature. Additionally, pyta-modified d-fructose via C1 and the corresponding Ru complex were synthesized. All compounds were analyzed by Rf values, specific rotation, NMR, IR, UV/Vis and fluorescence spectroscopy, mass spectrometry and elemental analysis.

d-Fructose-Decorated Poly(ethylene imine) for Human Breast Cancer Cell Targeting.

The high affinity of GLUT5 transporter for d-fructose in breast cancer cells has been discussed intensely. In this contribution, high molar mass linear poly(ethylene imine) (LPEI) is functionalized with d-fructose moieties to combine the selectivity for the GLUT5 transporter with the delivery potential of PEI for genetic material. The four-step synthesis of a thiol-group bearing d-fructose enables the decoration of a cationic polymer backbone with d-fructose via thiol-ene photoaddition. The functionalization of LPEI is confirmed by 2D NMR techniques, elemental analysis, and size exclusion chromatography. Importantly, a d-fructose decoration of 16% renders the polymers water-soluble and eliminates the cytotoxicity of PEI in noncancer L929 cells, accompanied by a reduced unspecific cellular uptake of the genetic material. In contrast, the cytotoxicity as well as the cell specific uptake is increased for triple negative MDA-MB-231 breast cancer cells. Therefore, the introduction of d-fructose shows superior potential for cell targeting, which can be assumed to be GLUT5 dependent.

Impact of PEG and PEG-b-PAGE modified PLGA on nanoparticle formation, protein loading and release.

The effect of modifying the well-established pharmaceutical polymer PLGA by different PEG-containing block-copolymers on the preparation of ovalbumin (OVA) loaded PLGA nanoparticles (NPs) was studied. The used polymers contained poly(d,l-lactic-co-glycolic acid) (PLGA), polyethylene glycol (PEG) and poly(allyl glycidyl ether) (PAGE) as building blocks. The double emulsion technique yielded spherical NPs in the size range from 170 to 220 nm (PDI<0.15) for all the differently modified polymers, allowing to directly compare protein loading of and release. PEGylation is usually believed to increase the hydrophilic character of produced particles, favoring encapsulation of hydrophilic substances. However, in this study simple PEGylation of PLGA had only a slight effect on protein release. In contrast, incorporating a PAGE block between the PEG and PLGA units, also eventually enabling active targeting introducing a reactive group, led to a significantly higher loading (+25%) and release rate (+100%), compared to PLGA and PEG-b-PLGA NPs.

Spatial separation of the processing and MHC class I loading compartments for cross-presentation of the tumor-associated antigen HER2/neu by human dendritic cells.

Cross-presentation is the process by which professional antigen presenting cells (APCs) (B cells, dendritic cells (DCs) and macrophages) present endocytosed antigens (Ags) via MHC-I to CD8+ T cells. This process is crucial for induction of adaptive immune responses against tumors and infected cells. The pathways and cellular compartments involved in cross-presentation are unresolved and controversial. Among the cells with cross-presenting capacity, DCs are the most efficient, which was proposed to depend on prevention of endosomal acidification to block degradation of the epitopes. Contrary to this view, we show in this report that some cargoes induce strong endosomal acidification following uptake by human DCs, while others not. Moreover, processing of the tumor-associated antigen HER2/neu delivered in nanoparticles (NP) for cross-presentation of the epitope HER2/neu369-377 on HLA-A2 depended on endosomal acidification and cathepsin activity as well as proteasomes, and newly synthesized HLA class I. However, the HLA-A*0201/HER2/neu369-377 complexes were not found in the endoplasmic reticulum (ER) nor in endolysosomes but in hitherto not described vesicles. The data thus indicate spatial separation of antigen processing and loading of MHC-I for cross-presentation: antigen processing occurs in the uptake compartment and the cytosol whereas MHC-I loading with peptide takes place in a distinct subcellular compartment. The findings further elucidate the cellular pathways involved in the cross-presentation of a full-length, clinically relevant tumor-associated antigen by human DCs, and the impact of the vaccine formulation on antigen processing and CD8+ T cell induction.

Small but powerful: co-assembly of polyether-based triblock terpolymers into sub-30 nm micelles and synergistic effects on cellular interactions.

We introduce a versatile ABC triblock terpoly- mer platform based on poly(ethylene oxide)-block-poly(allyl glycidyl ether)-block-poly(tert-butyl glycidyl ether) (PEO-b-PAGE-b-PtBGE) and subsequent functionalization of the PAGE segment with thiogalactose (hydroxyl), cysteamine (amino), and 2-mercaptopropionic acid (carboxy) by thiol-ene chemistry. These materials are used to prepare core-shell-corona micelles with a PtBGE core, a PAGE shell, and a PEO corona and sizes below 30 nm in aqueous media. We investigate the influence of different functional groups on micelle formation and cellular uptake. Moreover, co-assembly of differently functionalized materials allows to create micelles with a mixed shell and adjustable charge and, in that way, important characteristics such as cell uptake or cytotoxicity can be controlled. Furthermore, we demonstrate that even the uptake mechanism depends on the substitution pattern of the underlying triblock terpolymer.

Syntheses, characterization, and antitumor activities of platinum(II) and palladium(II) complexes with sugar-conjugated triazole ligands.

Four platinum(II) and palladium(II) complexes with sugar-conjugated bipyridine-type triazole ligands, [Pt(II)Cl(2)(AcGlc-pyta)] (3), [Pd(II)Cl(2)(AcGlc-pyta)] (4), [Pt(II)Cl(2)(Glc-pyta)] (5), and [Pd(II)Cl(2)(Glc-pyta)] (6), were prepared and characterized by mass spectrometry, elemental analysis, (1)H- and (13)C-NMR, IR as well as UV/VIS spectroscopy, where AcGlc-pyta and Glc-pyta denote 2-[4-(pyridin-2-yl)-1H-1,2,3-triazol-1-yl]ethyl 2,3,4,6-tetra-O-acetyl-ß-D-glucopyranoside (1) and 2-[4-(pyridin-2-yl)-1H-1,2,3-triazol-1-yl]ethyl ß-D-glucopyranoside (2), respectively. The solid-state structure of complex 6 was determined by single-crystal X-ray-diffraction analysis. These complexes exhibited in vitro cytotoxicity against human cervix tumor cells (HeLa) though weaker than that of cisplatin.

Mitochondrial mode of action of a thymidine-based cisplatin analogue breaks resistance in cancer cells.

Cisplatin analogue complexes with platinum(II) and palladium(II) starting from 3',5'-diamino-3',5'-dideoxy-thymidines were synthesized, both with the D-erythro- and D-threo configurations. Complexes of the general formula [MCl(2)L] were obtained and characterized. NMR spectroscopic measurements and single crystal X-ray structure analysis showed that the metal centers are coordinated to the ligands by the amino groups in 3'- and 5'-positions and not through the thymine moiety. All ligands and complexes showed no significant in vitro activities except thymiplatin (cis-dichloro(3',5'-diamino-3',5'-dideoxy-D-threo-thymidine)platinum(II)). Detailed in vitro studies on the apoptosis pathway in lymphoma (BJAB), leukemia (NALM-6), and melanoma cells (Mel-HO) as well as on transfected or resistant cell lines were carried out. Thymiplatin significantly induced an apoptotic response, which was found to be associated with the loss of mitochondrial membrane potential and with caspase activation. The activity was shown to be independent of Fas-associated protein with death domain (FADD), but dependent on Bcl-2 expression. As a consequence, for thymiplatin a mitochondrial mode of action could be assigned. Moreover, the compound showed activity in cells resistant to common drugs, such as daunorubicin and vincristin, and showed synergistic effects with doxorubicin, vincristin, cytarabin, and daunorubicin.

Syntheses, structural characterization and photophysical properties of 4-(2-pyridyl)-1,2,3-triazole rhenium(I) complexes.

Novel chelators, i.e., 4-(2-pyridyl)-1,2,3-triazole derivatives, were synthesized by means of Cu(I)-catalyzed 1,3-dipolar cycloaddition and used to prepare luminescent Re(I) complexes [ReCl(CO)(3)(Bn-pyta)], [ReCl(CO)(3)(AcGlc-pyta)] and [ReCl(CO)(3)(Glc-pyta)] (Bn-pyta = 1-benzyl-4-(2-pyridyl)-1,2,3-triazole, AcGlc-pyta = 2-(4-(2-pyridyl)-1,2,3-triazol-1-yl)ethyl 2,3,4,6-tetra-O-acetyl-beta-d-glucopyranoside, Glc-pyta = 2-(4-(2-pyridyl)-1,2,3-triazol-1-yl)ethyl beta-d-glucopyranoside). X-Ray crystallography of Bn-pyta and Glc-pyta indicated an azocompound-like structure while the 1,2,4-triazole isomer has an azine character. [ReCl(CO)(3)(Bn-pyta)] crystallized in the monoclinic system with space group P2(1)/n. Bn-pyta ligand coordinates with the nitrogen atoms of the 2-pyridyl group and the 3-position of 1,2,3-triazole ring, which is a very similar coordinating fashion to that of the 2,2'-bipyridine derivative. The glucoconjugated Re(I) complexes [ReCl(CO)(3)(AcGlc-pyta)] and [ReCl(CO)(3)(Glc-pyta)] hardly crystallized, and were analyzed by applying extended X-ray absorption fine structure (EXAFS) analysis. The EXAFS analyses suggested that the glucoconjugation at the 1-position of the 1,2,3-triazole makes no influence to the coordinating fashion of 4-(2-pyridyl)-1,2,3-triazole. [ReCl(CO)(3)(Bn-pyta)] showed a blue-shifted maximum absorption (333 nm, 3.97 x 10(3) M(-1) cm(-1)) compared with [ReCl(CO)(3)(bpy)] (371 nm, 3.35 x 10(3) M(-1) cm(-1)). These absorptions were clearly assigned to be the mixed metal-ligand-to-ligand charge transfer (MLLCT) on the basis of time-dependent density functional theory calculation. The luminescence spectrum of [ReCl(CO)(3)(Bn-pyta)] also showed this blue-shifted feature when compared with that of [ReCl(CO)(3)(bpy)]. The luminescence lifetime of [ReCl(CO)(3)(Bn-pyta)] was determined to be 8.90 mus in 2-methyltetrahydrofuran at 77 K, which is longer than that of [ReCl(CO)(3)(bpy)] (3.17 micros). The blue-shifted electronic absorption and elongated luminescence lifetime of [ReCl(CO)(3)(Bn-pyta)] suggested that 4-(2-pyridyl)-1,2,3-triazole functions as an electron-rich bidentate chelator.