Compatible blends of thermoplastic starch and hydrolyzed ethylene-vinyl acetate copolymers.

Ethylene-vinyl acetate copolymer (EVA) with 19% of vinyl acetate and its derivatives modified by hydrolysis of 50 and 100% of the initial vinyl acetate groups were used to produce blends with thermoplastic starch (TPS) plasticized with 30 wt% glycerol. The blends were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction, water absorption, stress-strain mechanical tests, dynamic mechanical analysis and thermogravimetric analysis. In contrast to the blends with unmodified EVA, those made with hydrolyzed EVA were compatible, as demonstrated by the brittle fracture surface analysis and the results of thermal and mechanical tests. The mechanical characteristics and water absorption of the TPS were improved even with a small addition (2.5 wt%) of hydrolyzed EVA. The glass transition temperature rose with the degree of hydrolysis of EVA by 40 and 50°, for the EVA with 50 and 100% hydrolysis, respectively. The addition of hydrolyzed EVA proved to be an interesting approach to improving TPS properties, even when very small quantities were used, such as 2.5 wt%.

Investigation of sisal fibers by atomic force microscopy: morphological and adhesive characteristics.

Atomic force microscopy (AFM) was used to study the nanoscale surface chemistry and morphological changes caused by chemical treatment of sisal fibers. Scanning Electron Microscopy (SEM) micrographs indicated that sisal in natura (bundle of fibers) is formed by fibers with diameters of approximately 10 microm. AFM images showed that these fibers consist of microfibrils with diameters varying from 250 to 600 nm, which are made up of nanofibrils of ca. 20 nm in diameter. The adhesion force (pull-off force) between the AFM tip and the fibers surface increased after benzylation, pointing to a decrease in the polar groups on the sisal fiber. The adhesion map measured over a scan range of 3 microm was heterogeneous in samples treated with 40% NaOH and the low adhesion sites disappeared after benzylation. Using an established mathematical model, it was possible to evaluate the increase in adhesion work and consequently in the interaction between the AFM tip and sisal fibers. These results indicated that AFM can detect heterogeneity in the wettability of sisal fibers with nanometer resolution and can be applied in the study of fiber-matrix adhesion in polymer composites.