RESUMO
The Clarion-Clipperton Zone (CCZ) in the tropical East Pacific is a region of interest for deep-sea mining due to its underwater deposits of polymetallic nodules containing economically important metals such as nickel, copper, and cobalt. It is also a region of extensive baseline studies aiming to describe the state of the environment, including the biodiversity of the benthic fauna. An abundant component of the abyssal plain ecosystem consists of sessile fauna which encrusts polymetallic nodules and are vulnerable to potential impacts arising from exploitation activities, particularly removal of substrate. Therefore, this fauna is often considered to have key species whose genetic connectivity should be studied to assess their ecological resilience. One such species is Abyssoprimnoagemina Cairns, 2015, a deep-sea coral from the CCZ whose presence in the Interoceanmetal Joint Organization (IOM) claim area has been confirmed during samplings. In this study, we used next-generation sequencing (NGS) to obtain the 18S nuclear rRNA gene and the complete mitochondrial genome of A.gemina from IOM exploration area. The mitogenome is 18,825 bp long and encodes for 14 protein coding genes, 2 rRNAs, and a single tRNA. The two phylogeny reconstructions derived from these data confirm previous studies and display A.gemina within a highly supported cluster of seven species whose mitogenomes are all colinear and of comparable size. This study also demonstrates the suitability of NGS for DNA barcoding of the benthic megafauna of the CCZ, which could become part of the IOM protocol for the assessment of population diversity and genetic connectivity in its claim area.
RESUMO
The condition-based maintenance of vibrating screens requires new methods of their elements' diagnostics due to severe disturbances in measured signals from vibrators and falling pieces of material. The bolted joints of the sieving deck, when failed, require a lot of time and workforce for repair. In this research, the authors proposed the model-based diagnostic method based on modal analysis of the 2-DOF system, which accounts for the interaction of the screen body and the upper deck under conditions of bolted joint degradation. It is shown that the second natural mode with an out-of-phase motion of the upper deck against the main screen housing may coincide with the excitation frequency or its higher harmonics, which appear when vibrators' bearings are in bad condition. This interaction speeds up bolt loosening and joint opening by the dynamical loading of higher amplitude. The proposed approach can be used to detune the system from resonance and anti-resonance to reduce maintenance costs and energy consumption. To prevent abrupt failures, such parameters as second natural mode frequency, damping factor, and phase space plot (PSP) distortion measures are proposed as bolt health indicators, and these are verified on the laboratory vibrating screen. Also, the robustness is tested by the impulsive non-Gaussian noise addition to the measurement data. A special diagram was proposed for the bolted joints' strength capacity assessment and maintenance actions planning (tightening, replacement), depending on clearance in the joints.
RESUMO
The article concerns the mechatronic design and experimental investigations of the HUBO automated human body scanning system. Functional problems that should be solved by using the developed scanning system are defined. These include reducing the number of sensors used while eliminating the need to rotate a human and ensuring the automation of the scanning process. Research problems that should be the subject of experimental research are defined. The current state of the art in the field of systems and techniques for scanning the human figure is described. The functional and technical assumptions for the HUBO scanning system are formulated. The mechanical design of the scanner, the hardware and information system architectures as well as the user's mobile application are presented. The method of operation of the scanning system and its innovative features are discussed. It is demonstrated that the developed solution of the scanning system allows the identified problems to be overcome. The methodology of the experimental research of the scanning system based on the photogrammetry technique is described. The results of laboratory studies with the use of dummies and experimental research with human participation are presented. The scope of the research carried out allows answers to the identified research problems related to the scanning of the human figure using the photogrammetry technique to be obtained. As part of laboratory tests using a measuring dummy, a mean error of 0.65 mm and standard deviation of the mean of 0.65 mm were obtained for the best scanner configuration. Research with human participation was carried out for the scanner version, in which the scanning time was 30 s, with the possibility of its reduction to 15 s. The results of studies using realistic dummies and with human participation were compared using the root mean square error parameter (RMSE) provided by the AliceVision framework, which was available for all analyzed objects. As a result, it was observed that these results are comparable, i.e., the RMSE parameter is equal to about 1 px.
Assuntos
Corpo Humano , Aplicativos Móveis , Humanos , Imageamento Tridimensional/métodos , Fotogrametria/métodos , AutomaçãoRESUMO
In the present paper, for the first time the ability of the porous biosilica originated from three marine diatom strains of 'Nanofrustulum spp.' viz. N. wachnickianum (SZCZCH193), N. shiloi (SZCZM1342), N. cf. shiloi (SZCZP1809), to eliminate MB from aqueous solutions was investigated. The highest biomass was achieved under silicate enrichment for N. wachnickianum and N. shiloi (0.98 g L-1 DW and 0.93 g L-1 DW respectively), and under 15 °C for N. cf. shiloi (2.2 g L-1 DW). The siliceous skeletons of the strains were purified with hydrogen peroxide and characterized by SEM, EDS, the N2 adsorption/desorption, XRD, TGA, and ATR-FTIR. The porous biosilica (20 mg DW) obtained from the strains i.e. SZCZCH193, SZCZM1342, SZCZP1809, showed efficiency in 77.6%, 96.8%, and 98.1% of 14 mg L-1 MB removal under pH 7 for 180 min, and the maximum adsorption capacity was calculated as 8.39, 19.02, and 15.17 mg g-1, respectively. Additionally, it was possible to increase the MB removal efficiency in alkaline (pH = 11) conditions up to 99.08% for SZCZP1809 after 120 min. Modelling revealed that the adsorption of MB follows Pseudo-first order, Bangham's pore diffusion and Sips isotherm models.
Assuntos
Diatomáceas , Azul de Metileno , Dióxido de Silício , Diatomáceas/química , Diatomáceas/crescimento & desenvolvimento , Dióxido de Silício/química , Dióxido de Silício/isolamento & purificação , Adsorção , Azul de Metileno/metabolismo , Concentração de Íons de Hidrogênio , Porosidade , Poluentes da Água/isolamento & purificação , Purificação da Água/instrumentação , Purificação da Água/métodosRESUMO
Dinoflagellates of the family Kryptoperidiniaceae, known as "dinotoms", possess diatom-derived endosymbionts and contain individuals at three successive evolutionary stages: a transiently maintained kleptoplastic stage; a stage containing multiple permanently maintained diatom endosymbionts; and a further permanent stage containing a single diatom endosymbiont. Kleptoplastic dinotoms were discovered only recently, in Durinskia capensis; until now it has not been investigated kleptoplastic behavior and the metabolic and genetic integration of host and prey. Here, we show D. capensis is able to use various diatom species as kleptoplastids and exhibits different photosynthetic capacities depending on the diatom species. This is in contrast with the prey diatoms in their free-living stage, as there are no differences in their photosynthetic capacities. Complete photosynthesis including both the light reactions and the Calvin cycle remain active only when D. capensis feeds on its habitual associate, the "essential" diatom Nitzschia captiva. The organelles of another edible diatom, N. inconspicua, are preserved intact after ingestion by D. capensis and expresses the psbC gene of the photosynthetic light reaction, while RuBisCO gene expression is lost. Our results indicate that edible but non-essential, "supplemental" diatoms are used by D. capensis for producing ATP and NADPH, but not for carbon fixation. D. capensis has established a species-specifically designed metabolic system allowing carbon fixation to be performed only by its essential diatoms. The ability of D. capensis to ingest supplemental diatoms as kleptoplastids may be a flexible ecological strategy, to use these diatoms as "emergency supplies" while no essential diatoms are available.
Assuntos
Diatomáceas , Dinoflagellida , Humanos , Dinoflagellida/genética , Dinoflagellida/metabolismo , Simbiose/genética , Fotossíntese , Evolução Biológica , Diatomáceas/genéticaRESUMO
Industrial wastes with hazardous dyes serve as a major source of water pollution, which is considered to have an enormous impact on public health. In this study, an eco-friendly adsorbent, the porous siliceous frustules extracted from the diatom species Halamphora cf. salinicola, grown under laboratory conditions, has been identified. The porous architecture and negative surface charge under a pH of 7, provided by the various functional groups via Si-O, N-H, and O-H on these surfaces, revealed by SEM, the N2 adsorption/desorption isotherm, Zeta-potential measurement, and ATR-FTIR, respectively, made the frustules an efficient mean of removal of the diazo and basic dyes from the aqueous solutions, 74.9%, 94.02%, and 99.81% against Congo Red (CR), Crystal Violet (CV), and Malachite Green (MG), respectively. The maximum adsorption capacities were calculated from isotherms, as follows: 13.04 mg g-1, 41.97 mg g-1, and 33.19 mg g-1 against CR, CV, and MG, respectively. Kinetic and isotherm models showed a higher correlation to Pore diffusion and Sips models for CR, and Pseudo-Second Order and Freundlich models for CV and MG. Therefore, the cleaned frustules of the thermal spring-originated diatom strain Halamphora cf. salinicola could be used as a novel adsorbent of a biological origin against anionic and basic dyes.
Assuntos
Diatomáceas , Poluentes Químicos da Água , Corantes/química , Corantes de Rosanilina/química , Vermelho Congo , Água/química , Adsorção , Cinética , Concentração de Íons de Hidrogênio , Poluentes Químicos da Água/químicaRESUMO
This article concerns the research of the HUBO full-body scanner, which includes the analysis and selection of the scanner's geometrical parameters in order to obtain the highest possible accuracy of the reconstruction of a human figure. In the scanner version analyzed in this paper, smartphone cameras are used as sensors. In order to process the collected photos into a 3D model, the photogrammetry technique is applied. As part of the work, dependencies between the geometrical parameters of the scanner are derived, which allows to significantly reduce the number of degrees of freedom in the selection of its geometrical parameters. Based on these dependencies, a numerical analysis is carried out, as a result of which the initial values of the geometrical parameters are pre-selected and distribution of scanner cameras is visualized. As part of the experimental research, the influence of selected scanner parameters on the scanning accuracy is analyzed. For the experimental research, a specially prepared dummy was used instead of the participation of a real human, which allowed to ensure the constancy of the scanned object. The accuracy of the object reconstruction was assessed in relation to the reference 3D model obtained with a scanner of superior measurement uncertainty. On the basis of the conducted research, a method for the selection of the scanner's geometrical parameters was finally verified, leading to the arrangement of cameras around a human, which guarantees high accuracy of the reconstruction. Additionally, to quantify the results, the quality rates were used, taking into account not only the obtained measurement uncertainty of the scanner, but also the processing time and the resulting efficiency.
Assuntos
Corpo Humano , Imageamento Tridimensional , Humanos , Imageamento Tridimensional/métodos , Fotogrametria/métodosRESUMO
Nanostructures-assisted laser desorption/ionization mass spectrometry (NALDI-MS) is gaining attention for the analysis of a wide range of molecules. In this present investigation, Pseudostaurosira trainorii mediated biosynthesized iron-oxide nanoparticles (IONPs) have been utilized as nanostructures assisting ionization and desorption for laser desorption/ionization mass spectrometry (LDI-MS). The chain forming diatom, P. trainorii showed efficiency in the production of IONPs against 0.01 M Fe+3 (pH 2) aqueous solution at the intracellular and extracellular level. The whole biomass and external media turned dark orange in color after 3 days of reaction with Fe3+ solution. Scanning electron microscopic (SEM) images illustrated that the surface of Fe3+ exposed frustules of P. trainorii were entirely covered by synthesized nanostructures contrasting with the natural surface ornamentation of control cells. The IONPs loaded frustules also exhibited catalytic properties by decolorizing yellow colored nitrophenol after 3 h of reaction. Transmission electron microscopic (TEM) images confirmed that the produced particles are spindle-shaped with ~50-70 nm length and ~10-30 nm width. The biogenic IONPs were utilized as an inorganic matrix in LDI-MS and showed high sensitivity towards small molecules as glucose, alanine and triacylglycerols at nano- and picomolar level per spot, respectively. The presented biocompatible technique offers new perspectives in nanobiotechnology for the production of spindle-shaped IONPs that can be applied in future for the preparation of NALDI plates.
Assuntos
Diatomáceas , Nanopartículas , Alanina , Glucose , Ferro , Lasers , Nanopartículas/química , Nitrofenóis , Óxidos/química , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodos , TriglicerídeosRESUMO
The siliceous exoskeletal shells of diatoms, commonly known as frustules, have drawn attention because of their photoluminescence property and high volume to surface area. Photonic biosilica can also enhance the plasmonic sensitivity of nanoparticles. Because of this, researchers have studied the effectiveness of various metal particles after combining with biosilica. Additionally, naturally occurring diatom-based biosilica has excellent adsorption and absorption capabilities, which have already been exploited for wastewater treatment. Moreover, the nanoporous, ultra-hydrophilic frustules can easily accumulate more molecules on their surfaces. As a consequence, it becomes easier to conjugate noble metals with silica, making them more stable and effective. The main focus of this review is to agglomerate the utility of biocompatible diatom frustules, which is a no-cost natural resource of biosilica, in metal modification and removal.
RESUMO
Diatoms represent, in terms of species number, one of the largest groups of microalgae that have the ability to synthesize phenomenal mineral composites characterized by complex hierarchical structures. Their shells, called frustules, create intricately ornamented structures, reminiscent of the most sophisticated, natural mosaics. Ordinated pore systems perforate siliceous walls of the frustules with diameters ranging from nano to micro-scale, forming openwork three-dimensional silica structures. The use of these features is one of the main challenges in developing new technological solutions. In this study we assess the ability of selected diatom species (Pseudostaurosira trainorii) for metabolic insertion of soluble titanium from the culture medium into the structure of amorphous silica cell walls by its cultivation in laboratory conditions. The study is aimed at obtaining new and strengthening the already existing optical properties of diatomaceous biosilica. The physicochemical properties of the obtained materials have been studied using a series of instrumental methods.
RESUMO
Lipid nanocarriers smaller than 200 nm may be used as pharmaceutical/cosmetic raw materials as they are able to penetrate the skin. The nanostructured lipid carriers (NLCs) based on microalgae oil (Schizochytrium) and lipids extracted from diatoms (Halamphora cf. salinicola (strain SZCZM1454A)) were produced by the HSH (high shear homogenization) method. Fatty acid profile of crude oil from diatoms indicated the presence of palmitoleic, palmitic, stearic acid, oleic and myristic acids as the most common fatty acids in the strain investigated. The quantitative composition and the synthesis condition of NLC dispersions were optimized by using the full factorial designs. The physicochemical parameters of the obtained lipid nanocarriers were characterized by SEM, DSC and XRD measurements and the fraction with the optimum parameters (size below 200 nm, polydispersity index not exceeding 0.2 and zeta potential higher than +45 mV) was selected for further study. The positive charge of the obtained lipid nanoparticles is beneficial as permits electrostatic bonding with the negatively charged skin surface. As follows from stability tests, the NLCs obtained could be stored at room temperature.
RESUMO
Fabrication of flower-like nanostructures are gaining attention because of their high surface/volume ratio and extensive adsorption capacity. In the present investigation, flower-shaped, autofluorescent silver-silica (Ag-SiO2) hybrid nanoparticles have been fabricated exploiting diatoms as a source of nanosilica. Two different species of Gedaniella including G. flavovirens and G. mutabilis showed their efficacy in synthesizing fluorescent Ag-SiO2 nanoflowers (NFs) and nanospheres (NSs) against 9 mM silver nitrate solution, respectively. The biogenic nanoconjugate (Ag-SiO2) was characterized by Uv-vis spectroscopy, energy dispersive X-ray spectroscopy (EDS), scanning (SEM) and transmission (TEM) electron microscopy. Production of Ag-SiO2 hybrid nanoparticle was confirmed by observing both Ag and Si signals from a single nanoparticle in an EDS study. The broad and single absorption band at ~420 nm in Uv-vis spectroscopy confirmed proper miscibility and production of hybrid nanoparticles. The Ag-SiO2 nanohybrids revealed autofluorescent property under the blue light region (excitation ~450-490 nm). SEM images of particles synthesized by G. flavovirens revealed the production of microscopic flower shaped Ag-SiO2 particles with several layers of petals. A TEM study confirmed that the synthesized Ag-SiO2 NFs are variable in size with 100-500 nm in diameter. Decolorization of methylene blue after exposure to Ag-SiO2 particles confirmed catalytic activity of synthesized nanostructures. This eco-friendly method provides a new dimension in nanobiotechnology for biogenesis of such hierarchical nanostructure in a cost-effective way.
RESUMO
In the present investigation, fucoxanthin-one of the major pigments in diatoms-has been extracted from Nanofrustulum shiloi SZCZM1342, and its reducing efficiency in the biogenesis of gold nanoparticles (GNPs) was checked. Fucoxanthin extracted from golden-brown cells of N. shiloi was compared to the healthy, growing biomass of N. shiloi and standard fucoxanthin after separate exposure to 25 mg L-1 aqueous hydrogen tetrachloroaurate solutions at room temperature. Isolated and standard fucoxanthin were found to be able to reduce gold ions within 12 h whereas, the whole biomass turned pink in color after 72 h of reaction. The synthesized particles were characterized by UV-vis spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). UV-vis spectroscopy of purple-colored suspensions showed the absorption band at approximately 520-545 nm, indicating a strong positive signal for GNP synthesis. The SEM study revealed the deposition of GNPs on siliceous frustules of metal-treated diatom cells. The TEM analysis confirmed the GNPs synthesized by whole biomass are triangular, spherical and hexagonal in nature, whereas the particles produced by extracted and standard fucoxanthin are all spherical in nature. This study demonstrates the involvement of fucoxanthin in the reduction of gold ions and subsequent production of gold nanospheres.
RESUMO
Presented here are new insights into the marine monoraphid diatom genera Schizostauron and Astartiella, based on molecular and morphological data, including descriptions of new species. Although no unambiguous morphological synapomorphies between the two genera are currently recognized, they are closely related by DNA sequence data. Heterovalvate frustules of Schizostauron are characterized by a bifid stauros on the raphe-bearing valve and intricate areolate occlusions on the sternum valve. In Astartiella, the raphe-bearing valve is characterized by a process resembling a fistula by morphology, while the sternum valve presents a particular striation pattern. Observations by light and electron microscopy were made, along with a molecular phylogenetic analysis using a three-gene (SSU, rbcL, and psbC) concatenated dataset. Three new Schizostauron species are described (S. kajotkei, S. rawaii, S. papilliareae), and two new combinations proposed (S. citronella and S. trachyderma) for species that were previously included either in Achnanthes and Cocconeis, respectively. Likewise, six new species of Astartiella (A. almalikii, A. bornmanii, A. chunlianlii, A. marksii, A. persica, and A. wangii) are described. Molecular results exclude Schizostauron and Astartiella from three clades of exclusively monoraphid diatoms, the Achnanthaceae, Cocconeidaceae, and Achnanthidiaceae, instead placing them in the Stauroneidaceae. Morphological features of Schizostauron and Astartiella, such as the stauros, fistula, and coaxial internal proximal raphe endings, are found in other genera in this clade, whereas the only common feature with monoraphid diatoms as whole group is the heterovalvy of frustules.
Assuntos
Diatomáceas , Fístula , Diatomáceas/genética , Microscopia Eletrônica , FilogeniaRESUMO
Diatoms have an ability that is unique among the unicellular photoautotrophic organisms to synthesize an intricately ornamented siliceous (biosilica) exoskeleton with an ordered, hierarchical, three-dimensional structure on a micro- to nanoscale. The unique morphological, structural, mechanical, transport, photonic, and optoelectronic properties of diatomaceous biosilica make it a desirable material for modern technologies. This review presents a summary and discussion of published research on the metabolic insertion of chemical elements with specific functional activity into diatomaceous biosilica. Included in the review is research on innovation in methods of synthesis of a new generation of functional siliceous materials, where the synthesis process is "outsourced" to intelligent microorganisms, referred to here as microtechnologists, by providing them with appropriate conditions and reagents.
RESUMO
In many marine littoral and sublittoral benthic habitats, we find small diatoms with few features resolvable with light microscopy (LM) other than internal costae across their valves. While classically those internal costae have defined their identification and classification, the use of electron microscopy and of molecular data have started to reveal the true diversity of unrelated forms and genera (e.g., Anaulus, Eunotogramma, Hustedtiella, or Plagiogramma) which possess these structures. Here we describe the new genus Ambo, in an attempt to clarify some of the polyphyly of taxa with internal costa by formally transferring Anaulus balticus, Anaulus simonsenii, and Plagiogramma tenuissimum as well as Ambo gallaeciae, described here. Related to this, we attempt to document and characterize the genus Anaulus itself, which was formally described by Ehrenberg with an illustration. A search by LM of mica designated by Ehrenberg as the holotype of Anaulus scalaris, the generitype of Anaulus, failed to recover a specimen which adequately describes the genus to the exclusion of other genera with internal costa. We also present morphological and molecular data for Anaulus creticus and suggest a new genus-Ceratanaulus-to reflect the distinct morphological and molecular characters we documented.
Assuntos
Organismos Aquáticos/classificação , Organismos Aquáticos/genética , Biodiversidade , Diatomáceas/classificação , Diatomáceas/genética , Filogenia , Especificidade da EspécieRESUMO
Although previous phylogenetic analyses suggested that the araphid diatom family Plagiogrammaceae is monophyletic, there is still not a clear understanding of relationships among the genera, and the taxonomy of several genera--Dimeregramma and Plagiogramma--remains questionable in light of paraphyly for both genera using molecular and morphological data. We have expanded the available DNA for molecular work for dozens of plagiogrammacean clones and analyzed 29 morphological characters from plagiogrammarian taxa and closely related genera, to increase understanding of the evolutionary history and systematics of the family and re-evaluate the current taxonomical classification of plagiogrammacean genera. The addition of more taxa and more data confirm the results from previous molecular phylogenies: most plagiogrammacean genera are monophyletic, except for Dimeregramma and Plagiogramma. Interestingly, the morphological analysis resolves only Talaroneis and Glyphodesmis as monophyletic. Given these results, we feel there is limited support for retaining Dimeregramma and Plagiogramma as distinct genera, and formally propose amending Plagiogramma and transferring six Dimeregramma species. As the Plagiogrammaceae is also one of the first-diverging clades of pennate diatoms, we also used these molecular data to estimate the age of the family, based on multiple calibration points derived from fossil taxa within or close to the Plagiogrammaceae. The results indicated that the Plagiogrammaceae evolved more than 114 million year ago and its diversification appears to correspond to a time of climate cooling. Additionally, we described a new monotypic genus (Coccinelloidea) with one new species C. gracilis, and five new species within established genera, e.g. Plagiogramma marginalis, Plagiogramma harenae, Plagiogramma porcipellis, Neofragilaria montgomeryii and Psammogramma anacarae.
Assuntos
Diatomáceas/classificação , Diatomáceas/genética , Filogenia , Animais , Teorema de Bayes , Mudança Climática , Diatomáceas/citologia , Diatomáceas/ultraestrutura , Fósseis , Análise de Sequência de DNARESUMO
A monophyletic group of dinoflagellates, called 'dinotoms', are known to possess evolutionarily intermediate plastids derived from diatoms. The diatoms maintain their nuclei, mitochondria, and the endoplasmic reticulum in addition with their plastids, while it has been observed that the host dinoflagellates retain the diatoms permanently by controlling diatom karyokinesis. Previously, we showed that dinotoms have repeatedly replaced their diatoms. Here, we show the process of replacements is at two different evolutionary stages in two closely related dinotoms, Durinskia capensis and D. kwazulunatalensis. We clarify that D. capensis is a kleptoplastic protist keeping its diatoms temporarily, only for two months. On the other hand, D. kwazulunatalensis is able to keep several diatoms permanently and exhibits unique dynamics to maintain the diatom nuclei: the nuclei change their morphologies into a complex string-shape alongside the plastids during interphase and these string-shaped nuclei then condense into multiple round nuclei when the host divides. These dynamics have been observed in other dinotoms that possess permanent diatoms, while they have never been observed in any other eukaryotes. We suggest that the establishment of this unique mechanism might be a critical step for dinotoms to be able to convert kleptoplastids into permanent plastids.
Assuntos
Núcleo Celular/ultraestrutura , Dinoflagellida/ultraestrutura , Plastídeos/ultraestrutura , Núcleo Celular/metabolismo , Dinoflagellida/genética , Dinoflagellida/metabolismo , Expressão Gênica , Microscopia Confocal , Microscopia Eletrônica de Transmissão , Microscopia de Fluorescência , Fotossíntese , Plastídeos/metabolismoRESUMO
New molecular and morphological insights are presented on Campylosira africana and two new species, Extubocellulus cupola sp. nov. and Plagiogrammopsis castigatus sp. nov. Species descriptions were based on LM/SEM micrographs and a data set with concatenated sequences of SSU, rbcL and psbC loci constructed from 56 cymatosiroid strains isolated from global geographic locations. Extubocellulus cupola is distinguished by a mesh-like marginal ridge and dome-shaped areolation, and P. castigatus, by a prominent marginal extension at the valve center. Campylosira africana, a species from South Africa described by Professor Malcolm Giffen, has never been documented through LM or SEM, which led some authors to place it in synonymy under Campylosira cymbelliformis. We confirm that C. africana is a distinct species and provide microphotographic documentation and DNA sequences. We present morphological evidence for the well-known cymatosiroid species Extubocellulus spinifer possessing complete pili, and we emend the generic description of Extubocellulus.
Assuntos
Diatomáceas , Filogenia , África do SulRESUMO
The family Cymatosiraceae, composed of two subfamilies (Cymatosiroideae and Extubocelluloideae), are elongate, non-pennate diatoms and are commonly reported in marine planktonic and benthic assemblages all over the world. The combination of the gross bilateral symmetry of the frustule and radial symmetry of the valve poration, distinct pore fields at the valve apices and DNA sequence data place this family in the controversial diatom class Mediophyceae, sister to the pennate diatoms. The relationships of the Cymatosiraceae within the Mediophyceae, and the monophyly of the two cymatosiroid subfamilies, have become less stable with the addition of new DNA sequence data. In this paper, we examined 24 cymatosiraceaen strains, including the new taxa Lambertocellus africana (Dabek & Witkowski) Dabek, Witkowski & Ashworth comb. nov., Leyanella probus Ashworth, Dabek & Witkowski sp. nov., and Leyanella pauciporis Ashworth, Dabek & Park sp. nov. to create the most complete molecular phylogeny of the Cymatosiraceae to date, using a three-gene (SSU, rbcL and psbC) data set. The results of the phylogenetic analysis supported the monophyly of the Cymatosiraceae, but not the monophyly of the subfamilies Cymatosiroideae and Extubocelluloideae. The phylogenetic analysis also suggested a close relationship of the Cymatosiraceae to the family Eupodiscaceae. The phylogenetic results have lead us to re-evaluate the taxonomy of L. africana, which is sister to Cymatosira lorenziana rather than Minutocellus as suggested in the original description.