Atomic-Scale Cryo-TEM Studies of the Electrochemistry of Redox Mediator in Li-O2 Batteries.

Rechargeable aprotic lithium (Li)-oxygen battery (LOB) is a potential next-generation energy storage technology because of its high theoretical specific energy. However, the role of redox mediator on the oxide electrochemistry remains unclear. This is partly due to the intrinsic complexity of the battery chemistry and the lack of in-depth studies of oxygen electrodes at the atomic level by reliable techniques. Herein, cryo-transmission electron microscopy (cryo-TEM) is used to study how the redox mediator LiI affects the oxygen electrochemistry in LOBs. It is revealed that with or without LiI in the electrolyte, the discharge products are plate-like LiOH or toroidal Li2 O2 , respectively. The I2 assists the decomposition of LiOH via the formation of LiIO3 in the charge process. In addition, a LiI protective layer is formed on the Li anode surface by the shuttle of I3 - , which inhibits the parasitic Li/electrolyte reaction and improves the cycle performance of the LOBs. The LOBs returned to 2e- oxygen reduction reaction (ORR) to produce Li2 O2 after the LiI in the electrolyte is consumed. This work provides new insight on the role of redox mediator on the complex electrochemistry in LOBs which may aid the design LOBs for practical applications.

Enabling Long Cycle Life and High Rate Iron Difluoride Based Lithium Batteries by In Situ Cathode Surface Modification.

Metals fluorides (MFs) are potential conversion cathodes to replace commercial intercalation cathodes. However, the application of MFs is impeded by their poor electronic/ionic conductivity and severe decomposition of electrolyte. Here, a composite cathode of FeF2 and polymer-derived carbon (FeF2 @PDC) with excellent cycling performance is reported. The composite cathode is composed of nanorod-shaped FeF2 embedded in PDC matrix with excellent mechanical strength and electronic/ionic conductivity. The FeF2 @PDC enables a reversible capacity of 500 mAh g-1 with a record long cycle lifetime of 1900 cycles. Remarkably, the FeF2 @PDC can be cycled at a record rate of 60 C with a reversible capacity of 107 mAh g-1 after 500 cycles. Advanced electron microscopy reveals that the in situ formation of stable Fe3 O4 layers on the surface of FeF2 prevents the electrolyte decomposition and leaching of iron (Fe), thus enhancing the cyclability. The results provide a new understanding to FeF2 electrochemistry, and a strategy to radically improve the electrochemical performance of FeF2 cathode for lithium-ion battery applications.

Size-Dependent Chemomechanical Failure of Sulfide Solid Electrolyte Particles during Electrochemical Reaction with Lithium.

The very high ionic conductivity of Li10GeP2S12 (LGPS) solid electrolyte (SE) makes it a promising candidate SE for solid-state batteries in electrical vehicles. However, chemomechanical failure, whose mechanism remains unclear, has plagued its widespread applications. Here, we report in situ imaging lithiation-induced failure of LGPS SE. We revealed a strong size effect in the chemomechanical failure of LGPS particles: namely, when the particle size is greater than 3 µm, fracture/pulverization occurred; when the particle size is between 1 and 3 µm, microcracks emerged; when the particle size is less than 1 µm, no chemomechanical failure was observed. This strong size effect is interpreted by the interplay between elastic energy storage and dissipation. Our finding has important implications for the design of high-performance LGPS SE, for example, by reducing the particle size to less than 1 µm the chemomechanical failure of LGPS SE can be mitigated.

In Situ Visualization of Lithium Penetration through Solid Electrolyte and Dead Lithium Dynamics in Solid-State Lithium Metal Batteries.

The two biggest promises of solid-state lithium (Li) metal batteries (SSLMBs) are the suppression of Li dendrites by solid-state electrolyte (SSE) and the realization of a high-energy-density Li anode. However, LMBs have not met their expectations due to Li dendrite growth causing short-circuiting. In fact, Li dendrites grow even more easily in SSE than in liquid electrolyte, but the reason for this remains unclear. Here we report in situ transmission electron microscopy observations of Li dendrite penetration through SSE and "dead" Li formation dynamics in SSLMBs. We show direct evidence that large electrochemomechanical stress generates cracks in the SSE and drives Li through the SSE directly. We revealed that fresh Li nucleation sites emerged in every discharge cycle, creating new "dead" Li in the following charging cycle and becoming the dominant Coulombic efficiency decay mechanism in SSLMBs. These results indicate that engineering flaw size and reducing electronic conductivity in SSEs are essential to improve the performance of SSLMBs.

In Situ Measurements of the Mechanical Properties of Electrochemically Deposited Li2CO3 and Li2O Nanorods.

Solid-electrolyte interface (SEI) is "the most important but least understood (component) in rechargeable Li-ion batteries". The ideal SEI requires high elastic strength and can resist the penetration of a Li dendrite mechanically, which is vital for inhibiting the dendrite growth in lithium batteries. Even though Li2CO3 and Li2O are identified as the major components of SEI, their mechanical properties are not well understood. Herein, SEI-related materials such as Li2CO3 and Li2O were electrochemically deposited using an environmental transmission electron microscopy (ETEM), and their mechanical properties were assessed by in situ atomic force microscopy (AFM) and inverse finite element simulations. Both Li2CO3 and Li2O exhibit nanocrystalline structures and good plasticity. The ultimate strength of Li2CO3 ranges from 192 to 330 MPa, while that of Li2O is less than 100 MPa. These results provide a new understanding of the SEI and its related dendritic problems in lithium batteries.

Ultrastable Anode/Electrolyte Interface in Solid-State Lithium-Metal Batteries Using LiCux Nanowire Network Host.

High interfacial resistance and uncontrollable lithium (Li) dendrite are major challenges in solid-state Li-metal batteries (SSLMBs), as they lead to premature short-circuiting and failure of SSLMBs. Here, we report the synthesis of a composite anode comprising a three-dimensional LiCux nanowire network host infiltrated with Li (Li* anode) with low interfacial impedance and superior electrochemical performance. The Li* anode is fabricated by dissolving Cu foil into molten Li followed by solidification. The Li* anode exhibits good wettability with Li6.4La3Zr1.4Ta0.6O12 (LLZTO) and high mechanical strength, rendering low Li*/LLZTO interfacial impedance, homogeneous deposition of Li, and suppression of Li dendrites. Consequently, the Li* anode-based symmetric cells and full cells with LiNi0.88Co0.1Al0.02O2 (NCA), LiFePO4 (LFP), and FeF2 cathodes deliver remarkable electrochemical performance. Specifically, the Li*/LLZTO/Li* symmetrical cell achieves a remarkably long cycle lifetime of 10 000 h with 0.1 mA·cm-2; the Li*/LLZTO/NCA full cell maintains capacity retention of 73.4% after 500 cycles at 0.5C; and all-solid-state Li*/LLZTO/FeF2 full cell achieves a reversible capacity of 147 mAh·g-1 after 500 cycles at 100 mA·g-1. This work demonstrates potential design tactics for an ultrastable Li*/garnet interface to enable high-performance SSLMBs.

Lithium Deposition-Induced Fracture of Carbon Nanotubes and Its Implication to Solid-State Batteries.

The increasing demand for safe and dense energy storage has shifted research focus from liquid electrolyte-based Li-ion batteries toward solid-state batteries (SSBs). However, the application of SSBs is impeded by uncontrollable Li dendrite growth and short circuiting, the mechanism of which remains elusive. Herein, we conceptualize a scheme to visualize Li deposition in the confined space inside carbon nanotubes (CNTs) to mimic Li deposition dynamics inside solid electrolyte (SE) cracks, where the high-strength CNT walls mimic the mechanically strong SEs. We observed that the deposited Li propagates as a creeping solid in the CNTs, presenting an effective pathway for stress relaxation. When the stress-relaxation pathway is blocked, the Li deposition-induced stress reaches the gigapascal level and causes CNT fracture. Mechanics analysis suggests that interfacial lithiophilicity critically governs Li deposition dynamics and stress relaxation. Our study offers critical strategies for suppressing Li dendritic growth and constructing high-energy-density, electrochemically and mechanically robust SSBs.

Clear Representation of Surface Pathway Reactions at Ag Nanowire Cathodes in All-Solid Li-O2 Batteries.

All-solid Li-O2 batteries have been constructed with Ag nanowire (AgNW) cathodes coated on Au-buffered garnet ceramic electrolytes and Li anodes on the other sides. Benefiting from the clean contacts of Li+, e-, and O2 on the AgNWs, the surface pathway reactions are demonstrated. Upon discharge, two types of Li2O2 morphologies appear. The film-like Li2O2 forms around the smooth surfaces of AgNWs, and hollow disk-like Li2O2 forms at the joints in between the AgNWs as well as at the garnet/AgNW interfaces. The formation of films and hollow disks is in accordance with the process of O2 + Li+ + e- → LiO2 and 2LiO2 → Li2O2 + O2, indicating that the disproportionation of LiO2 occurs at the solid interfaces. During the initial charge, decomposition occurs below the potential of 3.5 V, indicating the process of Li2O2 → LiO2 + Li+ + e- and LiO2 → Li+ + e- + O2 rather than Li2O2 → 2Li+ + 2e- + O2. The Li2O2 decomposition starts at the AgNWs/Li2O2 interfaces, causing the film-like Li2O2 to shrink and the gas to release, followed by the collapse of hollow disk-like Li2O2. The results here clearly disclose the Li-O2 reaction mechanism at the all-solid interfaces, facilitating a deep understanding of key factors influencing the electrochemical performance of the solid-state Li-O2 batteries.

A High-Performance Carbonate-Free Lithium|Garnet Interface Enabled by a Trace Amount of Sodium.

Garnet-type solid-state electrolytes (SSEs) are promising for the realization of next-generation high-energy-density Li metal batteries. However, a critical issue associated with the garnet electrolytes is the poor physical contact between the Li anode and the garnet SSE and the resultant high interfacial resistance. Here, it is reported that the Li|garnet interface challenge can be addressed by using Li metal doped with 0.5 wt% Na (denoted as Li*) and melt-casting the Li* onto the garnet SSE surface. A mechanistic study, using Li6.4 La3 Zr1.4 Ta0.6 O12 (LLZTO) as a model SSE, reveals that Li2 CO3 resides within the grain boundaries of newly polished LLZTO pellet, which is difficult to remove and hinders the wetting process. The Li* melt can phase-transfer the Li2 CO3 from the LLZTO grain boundary to the Li*'s top surface, and therefore facilitates the wetting process. The obtained Li*|LLZTO demonstrates a low interfacial resistance, high rate capability, and long cycle life, and can find applications in future all-solid-state batteries (e.g., Li*|LLZTO|LiFePO4 ).

Lithium whisker growth and stress generation in an in situ atomic force microscope-environmental transmission electron microscope set-up.

Lithium metal is considered the ultimate anode material for future rechargeable batteries1,2, but the development of Li metal-based rechargeable batteries has achieved only limited success due to uncontrollable Li dendrite growth3-7. In a broad class of all-solid-state Li batteries, one approach to suppress Li dendrite growth has been the use of mechanically stiff solid electrolytes8,9. However, Li dendrites still grow through them10,11. Resolving this issue requires a fundamental understanding of the growth and associated electro-chemo-mechanical behaviour of Li dendrites. Here, we report in situ growth observation and stress measurement of individual Li whiskers, the primary Li dendrite morphologies12. We combine an atomic force microscope with an environmental transmission electron microscope in a novel experimental set-up. At room temperature, a submicrometre whisker grows under an applied voltage (overpotential) against the atomic force microscope tip, generating a growth stress up to 130 MPa; this value is substantially higher than the stresses previously reported for bulk13 and micrometre-sized Li14. The measured yield strength of Li whiskers under pure mechanical loading reaches as high as 244 MPa. Our results provide quantitative benchmarks for the design of Li dendrite growth suppression strategies in all-solid-state batteries.

Genetic linkage analyses and Cx50 mutation detection in a large multiplex Chinese family with hereditary nuclear cataract.

PURPOSE: The aim of the study was to characterize the underlying mutation in a large multiplex Chinese family with hereditary nuclear cataract. METHODS: A 6-generation Chinese family having hereditary nuclear cataract was recruited and clinically verified. Blood DNA samples were obtained from 53 available family members. Linkage analyses were performed on the known candidate regions for hereditary cataract with 36 polymorphic microsatellite markers. To identify mutations related to cataract, a direct sequencing approach was applied to a candidate gene residing in our linkage locus. RESULTS: A linkage locus was identified with a maximum 2-point LOD score of 4.31 (recombination fraction = 0) at marker D1S498 and a maximum multipoint LOD score of 5.7 between markers D1S2344 and D1S498 on chromosome 1q21.1, where the candidate gene Cx50 is located. Direct sequencing of Cx50 showed a 139 G to A transition occurred in all affected family members. This transitional mutation resulted in a replacement of aspartic acid by asparagine at residue 47 (D47N) and led to a loss-of-function of the protein. CONCLUSIONS: The D47N mutation of Cx50 causes the hereditary nuclear cataract in this family in an autosomal dominant mode of inheritance with incomplete penetrance.