Do dielectric bilayer metasurfaces behave as a stack of decoupled single-layer metasurfaces?

Flat optics or metasurfaces have opened new frontiers in wavefront shaping and its applications. Polarization optics is one prominent area which has greatly benefited from the shape-birefringence of metasurfaces. However, flat optics comprising a single layer of meta-atoms can only perform a subset of polarization transformations, constrained by a symmetric Jones matrix. This limitation can be tackled using metasurfaces composed of bilayer meta-atoms but exhausting all possible combinations of geometries to build a bilayer metasurface library is a very daunting task. Consequently, bilayer metasurfaces have been widely treated as a cascade (product) of two decoupled single-layer metasurfaces. Here, we test the validity of this assumption for dielectric metasurfaces by considering a metasurface made of titanium dioxide on fused silica substrate at a design wavelength of 532 nm. We explore regions in the design space where the coupling between the top and bottom layers can be neglected, i.e., producing a far-field response which approximates that of two decoupled single-layer metasurfaces. We complement this picture with the near-field analysis to explore the underlying physics in regions where both layers are strongly coupled. We also show the generality of our analysis by applying it to silicon metasurfaces at telecom wavelengths. Our unified approach allows the designer to efficiently build a multi-layer dielectric metasurface, either in transmission or reflection, by only running one full-wave simulation for a single-layer metasurface.

Adjoint-optimized metasurfaces for compact mode-division multiplexing.

Optical fiber communications rely on multiplexing techniques that encode information onto various degrees of freedom of light to increase the transmission capacity of a fiber. However, the rising demand for larger data capacity is driving the need for a multiplexer for the spatial dimension of light. We introduce a mode-division multiplexer and demultiplexer design based on a metasurface cavity. This device performs, on a single surface, mode conversion and coupling to fibers without any additional optics. Converted modes have high fidelity due to the repeated interaction of light with the metasurface's phase profile that was optimized using an inverse design technique known as adjoint analysis. We experimentally demonstrate a compact and highly integrated metasurface-based mode multiplexer that takes three single-mode fiber inputs and converts them into the first three linearly polarized spatial modes of a few-mode fiber with fidelities of up to 72% in the C-band (1530-1565 nm).

Efficient integrated tri-modal coupler for few-mode fibers.

This paper demonstrates a high-efficiency vertical grating coupler for the LP01x, LP11ax, and LP11bx modes of a graded-index few-mode fiber. The coupler is composed of a non-uniform straight bidirectional grating that was inverse-designed to address the desired fiber modes, combined with two mode-selective directional couplers and two tapers. The device was fabricated by e-beam lithography with a minimum feature size of 100 nm and presented coupling efficiencies of -3.0 dB, -3.6 dB, and -3.4 dB for the LP01x, LP11ax, and LP11bx modes, respectively. The high efficiency of the proposed CMOS-compatible coupler demonstrates its potential as a key device for high-capacity networks exploiting space division multiplexing on few-mode fibers.

Compact dual-polarization silicon integrated couplers for multicore fibers.

Compact fiber-to-chip couplers play an important role in optical interconnections, especially in data centers. However, the development of couplers has been mostly limited to standard single-mode fibers, with few devices compatible with multicore and multimode fibers. Through the use of state-of-the-art optimization algorithms, we designed a compact dual-polarization coupler to interface chips and dense multicore fibers, demonstrating, for the first time, coupling to both polarizations of all the cores, with measured coupling efficiency of -4.3dB and with a 3 dB bandwidth of 48 nm. The dual-polarization coupler has a footprint of 200µm2 per core, which makes it the smallest fiber-to-chip coupler experimentally demonstrated on a standard silicon-on-insulator platform.

Ultra-low-power four-wave mixing wavelength conversion in high-Q chalcogenide microring resonators.

A compact Ge11.5As24Se64.5 chalcogenide microring resonator is fabricated with an intrinsic quality factor of 3.0×105 in the telecom band. By taking advantage of the strong nonlinearity and cavity enhancement, highly efficient wavelength conversion via four-wave mixing is demonstrated using a microring resonator. Conversion efficiency of -33.7dB is obtained by using an ultra-low pump power of 63.8 µW. This work shows that Ge11.5As24Se64.5 chalcogenide microring devices are promising for quantum photonics.

Design of a compact CMOS-compatible photonic antenna by topological optimization.

Photonic antennas are critical in applications such as spectroscopy, photovoltaics, optical communications, holography, and sensors. In most of those applications, metallic antennas have been employed due to their reduced sizes. Nevertheless, compact metallic antennas suffer from high dissipative loss, wavelength-dependent radiation pattern, and they are difficult to integrate with CMOS technology. All-dielectric antennas have been proposed to overcome those disadvantages because, in contrast to metallic ones, they are CMOS-compatible, easier to integrate with typical silicon waveguides, and they generally present a broader wavelength range of operation. These advantages are achieved, however, at the expense of larger footprints that prevent dense integration and their use in massive phased arrays. In order to overcome this drawback, we employ topological optimization to design an all-dielectric compact antenna with vertical emission over a broad wavelength range. The fabricated device has a footprint of 1.78 µm × 1.78 µm and shows a shift in the direction of its main radiation lobe of only 4° over wavelengths ranging from 1470 nm to 1550 nm and a coupling efficiency bandwidth broader than 150 nm.

Characterization of surface-states in a hollow core photonic crystal fiber.

Surface or edge states represent an important class of modes in various photonic crystal systems such as in dielectric topological insulators and in photonic crystal fibers. In the later, strong attenuation peaks in the transmission spectrum are attributed to coupling between surface and core-guided modes. Here, we explore a modified implementation of the spatial and spectral interference method to experimentally characterize surface modes in photonic crystal fibers. Using an external reference and a non-uniform Fourier transform windowing, the obtained spectrogram allows clear observation of anti-crossing behavior at wavelengths in which surface and core modes are strongly coupled. We also detect surface modes with different spatial symmetries, and give insight into mode families couple to the fundamental or high-order core modes, as well as the existence of uncoupled surface modes.

Side-lobe level reduction in bio-inspired optical phased-array antennas.

Phased arrays are expected to play a critical role in visible and infrared wireless systems. Their improved performance compared to single element antennas finds uses in communications, imaging, and sensing. However, fabrication of photonic antennas and their feeding network require long element separation, leading to the appearance of secondary radiation lobes and, consequently, crosstalk and interference. In this work, we experimentally show that by arranging the elements according to the Fermat's spiral, the side lobe level (SLL) can be reduced. This reduction is proved in a CMOS-compatible 8-element array, revealing a SLL decrement of 0.9 dB. Arrays with larger numbers of elements and inter-element spacing are demonstrated through an spatial light modulator (SLM) and an SLL drop of 6.9 dB is measured for a 64-element array. The reduced SLL, consequently, makes the proposed approach a promising candidate for applications in which antenna gain, power loss, or information security are key requirements.