RESUMO
Bromate, classified as a EU CLP 1B carcinogen, is a typical by-product of the disinfection of drinking and swimming pool water. The aim of this study was (a) to provide data on the occurrence of bromate in pool water, (b) to re-evaluate the carcinogenic MOA of bromate in the light of existing data, (c) to assess the possible exposure to bromate via swimming pool water and (d) to inform the derivation of cancer risk-related bromate concentrations in swimming pool water. Measurements from monitoring analysis of 229 samples showed bromate concentrations in seawater pools up to 34 mg/L. A comprehensive non-systematic literature search was done and the quality of the studies on genotoxicity and carcinogenicity was assessed by Klimisch criteria (Klimisch et al., Regul Toxicol Pharmacol 25:1-5, 1997) and SciRAP tool (Beronius et al., J Appl Toxicol, 38:1460-1470, 2018) respectively. Benchmark dose (BMD) modeling was performed using the modeling average mode in BMDS 3.1 and PROAST 66.40, 67 and 69 (human cancer BMDL10; EFSA 2017). For exposure assessment, data from a wide range of sources were evaluated for their reliability. Different target groups (infants/toddlers, children and adults) and exposure scenarios (recreational, sport-active swimmers, top athletes) were considered for oral, inhalation and dermal exposure. Exposure was calculated according to the frequency of swimming events and duration in water. For illustration, cancer risk-related bromate concentrations in pool water were calculated for different target groups, taking into account their exposure using the hBMDL10 and a cancer risk of 1 in 100,000. Convincing evidence was obtained from a multitude of studies that bromate induces oxidative DNA damage and acts as a clastogen in vitro and in vivo. Since statistical modeling of the available genotoxicity data is compatible with both linear as well as non-linear dose-response relationships, bromate should be conservatively considered to be a non-threshold carcinogen. BMD modeling with model averaging for renal cancer studies (Kurokawa et al., J Natl. Cancer Inst, 1983 and 1986a; DeAngelo et al., Toxicol Pathol 26:587-594, 1998) resulted in a median hBMDL10 of 0.65 mg bromate/kg body weight (bw) per day. Evaluation of different age and activity groups revealed that top athletes had the highest exposure, followed by sport-active children, sport-active adults, infants and toddlers, children and adults. The predominant route of exposure was oral (73-98%) by swallowing water, followed by the dermal route (2-27%), while the inhalation route was insignificant (< 0.5%). Accepting the same risk level for all population groups resulted in different guidance values due to the large variation in exposure. For example, for an additional risk of 1 in 100,000, the bromate concentrations would range between 0.011 for top athletes, 0.015 for sport-active children and 2.1 mg/L for adults. In conclusion, the present study shows that health risks due to bromate exposure by swimming pool water cannot be excluded and that large differences in risk exist depending on the individual swimming habits and water concentrations.
Assuntos
Neoplasias , Piscinas , Poluentes Químicos da Água , Adulto , Bromatos/toxicidade , Carcinógenos/análise , Humanos , Lactente , Reprodutibilidade dos Testes , Natação , Água , Poluentes Químicos da Água/análise , Poluentes Químicos da Água/toxicidadeRESUMO
The use of hydraulic fracturing (HF) to extract oil and natural gas has increased, along with intensive discussions on the associated risks to human health. Three technical processes should be differentiated when evaluating human health risks, namely (1) drilling of the borehole, (2) hydraulic stimulation, and (3) gas or oil production. During the drilling phase, emissions such as NOx, NMVOCs (non-methane volatile organic compounds) as precursors for tropospheric ozone formation, and SOx have been shown to be higher compared to the subsequent phases. In relation to hydraulic stimulation, the toxicity of frac fluids is of relevance. More than 1100 compounds have been identified as components. A trend is to use fewer, less hazardous and more biodegradable substances; however, the use of hydrocarbons, such as kerosene and diesel, is still allowed in the USA. Methane in drinking water is of low toxicological relevance but may indicate inadequate integrity of the gas well. There is a great concern regarding the contamination of ground- and surface water during the production phase. Water that flows to the surface from oil and gas wells, so-called 'produced water', represents a mixture of flow-back, the injected frac fluid returning to the surface, and the reservoir water present in natural oil and gas deposits. Among numerous hazardous compounds, produced water may contain bromide, arsenic, strontium, mercury, barium, radioactive isotopes and organic compounds, particularly benzene, toluene, ethylbenzene and xylenes (BTEX). The sewage outflow, even from specialized treatment plants, may still contain critical concentrations of barium, strontium and arsenic. Evidence suggests that the quality of groundwater and surface water may be compromised by disposal of produced water. Particularly critical is the use of produced water for watering of agricultural areas, where persistent compounds may accumulate. Air contamination can occur as a result of several HF-associated activities. In addition to BTEX, 20 HF-associated air contaminants are group 1A or 1B carcinogens according to the IARC. In the U.S., oil and gas production (including conventional production) represents the second largest source of anthropogenic methane emissions. High-quality epidemiological studies are required, especially in light of recent observations of an association between childhood leukemia and multiple myeloma in the neighborhood of oil and gas production sites. In conclusion, (1) strong evidence supports the conclusion that frac fluids can lead to local environmental contamination; (2) while changes in the chemical composition of soil, water and air are likely to occur, the increased levels are still often below threshold values for safety; (3) point source pollution due to poor maintenance of wells and pipelines can be monitored and remedied; (4) risk assessment should be based on both hazard and exposure evaluation; (5) while the concentrations of frac fluid chemicals are low, some are known carcinogens; therefore, thorough, well-designed studies are needed to assess the risk to human health with high certainty; (6) HF can represent a health risk via long-lasting contamination of soil and water, when strict safety measures are not rigorously applied.
Assuntos
Exposição Ambiental/estatística & dados numéricos , Fraturamento Hidráulico , Poluentes Químicos da Água/análise , Benzeno , Derivados de Benzeno , Água Subterrânea , Humanos , Hidrocarbonetos , Gás Natural , Campos de Petróleo e Gás , Indústria de Petróleo e Gás , Petróleo , Tolueno , Compostos Orgânicos Voláteis , Poços de ÁguaRESUMO
Primary human hepatocytes (PHH) are the "gold standard" for in vitro toxicity tests. However, 2D PHH cultures have limitations that are due to a time-dependent dedifferentiation process visible by morphological changes closely connected to a decline of albumin production and CYP450 activity. The 3D in vitro culture corresponds to in vivo-like tissue architecture, which preserves functional characteristics of hepatocytes, and therefore can at least partially overcome the restrictions of 2D cultures. Consequently, several drug toxicities observed in vivo cannot be reproduced in 2D in vitro models, for example, the toxic effects of acetaminophen. The objective of this study was to identify molecular differences between 2D and 3D cultivation which explain the observed toxicity response. Our data demonstrated an increase in cell death after treatment with acetaminophen in 3D, but not in 2D cultures. Additionally, an acetaminophen concentration-dependent increase in the CYP2E1 expression level in 3D cultures was detected. However, during the treatment with 10 mM acetaminophen, the expression level of SOD gradually decreased in 3D cultures and was undetectable after 24 h. In line with these findings, we observed higher import/export rates in the membrane transport protein, multidrug resistance-associated protein-1, which is known to be specific for acetaminophen transport. The presented data demonstrate that PHH cultured in 3D preserve certain metabolic functions. Therefore, they have closer resemblance to the in vivo situation than PHH in 2D cultures. In consequence, 3D cultures will allow for a more accurate hepatotoxicity prediction in in vitro models in the future.
Assuntos
Acetaminofen/toxicidade , Técnicas de Cultura de Células/métodos , Hepatócitos/citologia , Hepatócitos/efeitos dos fármacos , Fígado/efeitos dos fármacos , Proteínas Associadas à Resistência a Múltiplos Medicamentos/metabolismo , Acetaminofen/metabolismo , Acetaminofen/farmacocinética , Morte Celular/efeitos dos fármacos , Citocromo P-450 CYP2E1/metabolismo , Relação Dose-Resposta a Droga , Humanos , Fígado/metabolismo , Proteínas Associadas à Resistência a Múltiplos Medicamentos/genética , Cultura Primária de Células/métodos , Superóxido Dismutase/metabolismoRESUMO
Hepatocyte transplantation is considered to be an alternative to orthotopic liver transplantation. Cells can be used to bridge patients waiting for a donor organ, decrease mortality in acute liver failure, and support metabolic liver diseases. The limited availability of primary human hepatocytes for such applications has led to the generation of alternative hepatocyte-like cells from various adult stem or precursor cells. The aim of this study was to generate hepatocyte-like cells from adipose-derived mesenchymal stem cells (Ad-MSCs) for clinical applications, which are available "off the shelf." Epigenetic changes in hepatocyte-like cells were induced by 5-azacytidine, which, in combination with other supplements, leads to significantly improved metabolic and enzymatic activities compared to nontreated cells. Cells with sufficient hepatic features were generated with a four-step protocol: 5-azacytidine (step 1); epidermal growth factor (step 2); fibroblast growth factor-4, dexamethasone, insulin-transferrin-sodium-selenite, and nicotinamide (step 3); and hepatocyte growth factor, dexamethasone, insulin-transferrin-sodium-selenite, and nicotinamide (step 4). Generated differentiated cells had higher phase I (CYP1A1/2, CYP2E1, CYP2B6, CYP3A4) and phase II activities compared to the undifferentiated cells. A strong expression of CYP3A7 and a weak expression of 3A4, as well as the important detoxification markers α-fetoprotein and albumin, could also be detected at the mRNA level. Importantly, urea metabolism (basal, NH4-stimulated, NH4- and ornithine-stimulated) was comparable to freshly isolated human hepatocytes, and unlike cryopreserved human hepatocytes, this activity was maintained after 6 months of cryopreservation. These findings suggest that these cells may be suitable for clinical application, especially for treatment of urea cycle disorders.
Assuntos
Tecido Adiposo/fisiologia , Metilação de DNA , Hepatócitos/fisiologia , Células-Tronco Mesenquimais/fisiologia , Ureia/metabolismo , Tecido Adiposo/citologia , Tecido Adiposo/metabolismo , Adiposidade/efeitos dos fármacos , Técnicas de Cultura de Células , Diferenciação Celular/genética , Diferenciação Celular/fisiologia , Processos de Crescimento Celular/fisiologia , Células Cultivadas , Criopreservação , Feminino , Hepatócitos/citologia , Hepatócitos/metabolismo , Humanos , Transplante de Fígado/métodos , Masculino , Transplante de Células-Tronco Mesenquimais/métodos , Células-Tronco Mesenquimais/citologia , Células-Tronco Mesenquimais/metabolismoRESUMO
The in vitro mammalian metabolism of the fungicide zoxamide is related to its in vitro mammalian toxicity. After incubation of zoxamide with rat liver microsomes leading to practically 100% metabolism (mostly hydroxylated zoxamide), the cytotoxicity (methyl thiazole tetrazolium (MTT) test) and the mitosis-inhibiting potential (shown by cell count and by cell cycle analysis) for V79 were not distinguishable from those of zoxamide, demonstrating that the hydroxylation of zoxamide did not change the cytotoxicity or mitosis-inhibiting potential as determined by these assays. After incubation of zoxamide with rat liver S9 predominantly leading to conjugation with glutathione, and after incubation of zoxamide with rat liver slices predominantly leading to the glucuronide of the hydroxylated zoxamide, these activities were eliminated demonstrating that the glutathione conjugate and the glucuronide had lost the activities in these assays due either to no intrinsic potential of these conjugates or to their inability to penetrate the plasma membrane of mammalian cells. It is concluded that the metabolic hydroxylation of zoxamide did not change its activity in the assays used for investigating its influence on cell proliferation, cell cycle and cytotoxicity, while the formation of conjugates with glutathione or glucuronic acid led to the apparent loss of these activities. Thus, with zoxamide as a prototype, it was shown that, in principle, mammalian metabolism and its relationship to mammalian detoxication of fungicidal mitosis inhibitors may be reasonably anticipated from in vitro studies. In addition, the results provide a rational for the observed absence of typically mitosis inhibition-associated toxicities of zoxamide in mammals in vivo.
Assuntos
Amidas/metabolismo , Amidas/toxicidade , Fungicidas Industriais/metabolismo , Fungicidas Industriais/toxicidade , Mitose/efeitos dos fármacos , Animais , Linhagem Celular , Sistema Enzimático do Citocromo P-450/genética , Sistema Enzimático do Citocromo P-450/metabolismo , Humanos , Hidroxilação , Fígado/efeitos dos fármacos , Fígado/metabolismo , Microssomos Hepáticos/efeitos dos fármacos , Microssomos Hepáticos/metabolismo , Ratos , TransfecçãoRESUMO
A compact eccentric inlet port centrifugal blood pump (C1E3) has been perfected for a long-term centrifugal ventricular assist device as well as a cardiopulmonary bypass pump. The C1E3 pump incorporates a sealless design and a blood stagnation free structure. The pump's impeller is magnetically coupled to the driver magnet in a sealless manner. The latest hemolysis study reveals that hemolysis is affected by the magnetic coupling distance between the driver and impeller magnet. Furthermore, a floating phenomenon can be observed in a pivot bearing supported pump. Attention was focused on the relationship between the floating phenomenon's characteristics and the magnetic coupling design in the C1E3 pump. Studies were conducted to evaluate the hydromechanical performance in the floating phenomenon. In this study, the relationship between the magnetic coupling design and the floating phenomenon was verified with a smooth spinning condition. The optimized magnetic coupling distance for the floating mode was estimated to be 12 mm for left ventricular assist device and 9 mm for cardiopulmonary bypass pump. Obtaining an optimal spinning condition is required for regulating the magnetic coupling force. To develop a double pivot bearing pump, it is necessary to establish an optimal spinning and/or floating condition and to determine the proper magnetic coupling and magnetic force between the impeller and driver.
Assuntos
Circulação Assistida/normas , Coração Auxiliar , Ponte Cardiopulmonar , Centrifugação , Campos Eletromagnéticos , VibraçãoRESUMO
Since 1991, in our laboratory, a pivot bearing-supported, sealless, centrifugal pump has been developed as an implantable ventricular assist device (VAD). For this application, the configuration of the total pump system should be relatively small. The C1E3 pump developed for this purpose was anatomically compatible with the small-sized patient population. To evaluate antithrombogenicity, ex vivo 2-week screening studies were conducted instead of studies involving an intracorporeally implanted VADs using calves. Five paracorporeal LVAD studies were performed using calves for longer than 2 weeks. The activated clotting time (ACT) was maintained at approximately 250 s using heparin. All of the devices demonstrated trouble-free performances over 2 weeks. Among these 5 studies, 3 implantations were subjected to 1-month system validation studies. There were no device-induced thrombus formations inside the pump housing, and plasma-free hemoglobin levels in calves were within the normal range throughout the experiment (35, 34, and 31 days). There were no incidents of system malfunction. Subsequently, the mass production model was fabricated and yielded a normalized index of hemolysis of 0.0014, which was comparable to that of clinically available pumps. The wear life of the impeller bearings was estimated at longer than 8 years. In the next series of in vivo studies, an implantable model of the C1E3 pump will be fabricated for longer term implantation. The pump-actuator will be implanted inside the body; thus the design calls for substituting plastic for metallic parts.
Assuntos
Coração Auxiliar/tendências , Contagem de Células Sanguíneas , Centrifugação , Meios de Cultura , Desenho de Equipamento/tendências , Coração Auxiliar/efeitos adversos , Coração Auxiliar/normas , Hemólise , Heparina/uso terapêutico , Humanos , Complicações Pós-Operatórias/tratamento farmacológico , Pseudomonas aeruginosa/crescimento & desenvolvimento , Trombose/tratamento farmacológico , Trombose/microbiologiaRESUMO
A small ventricular assist device intended for long-term implantation has been developed by a cooperative effort between the Baylor College of Medicine and the NASA/Johnson Space Center. To date, in vitro tests have been performed to address hemolysis and pump performance issues. In this Phase 1 study, we assessed the durability and atraumatic features aiming for 2 day implantation. Eight pumps were implanted in 2 calves as paracorporeal left ventricular assist devices. The pump running times ranged from 18 to 203 h (78.1 +/- 23.7; mean +/- SEM). All the pump implantations were terminated because of thrombus formation. Plasma-free hemoglobin levels were below 13.7 mg/dl, except for 1 case complicated by inflow cannula obstruction. The pump speed was maintained between 10,100 and 11,400 rpm. Pump outputs were from 3.6 to 5.2 L/min. The electrical power required by the system ranged between 9 and 12 W. Clinically there was no detectable organ dysfunction noted, and postmortem evaluation demonstrated no pump related adverse effects in either calf except for small kidney infarctions. Thrombus deposition was observed mainly at the hub portions and the flow straightener.
Assuntos
Coração Auxiliar/normas , Alanina Transaminase/sangue , Animais , Aspartato Aminotransferases/sangue , Bilirrubina/sangue , Nitrogênio da Ureia Sanguínea , Bovinos , Creatinina/sangue , Feminino , Coração Auxiliar/efeitos adversos , Hemoglobinas/metabolismo , Bombas de Infusão Implantáveis , Trombose/fisiopatologia , Estados Unidos , United States National Aeronautics and Space AdministrationRESUMO
A collaborative effort between Baylor College of Medicine and NASA/Johnson Space Center is underway to develop an axial flow ventricular assist device (VAD). We evaluated inducer/impeller component designs in a series of in vitro hemolysis tests. As a result of computational fluid dynamic analysis, a flow inducer was added to the front of the pump impeller. According to the surface pressure distribution, the flow inducer blades were connected to the impeller long blades. This modification eliminated high negative pressure areas at the leading edge of the impeller. Comparative studies were performed between inducer blade sections that flowed smoothly into the impeller blades (continuous blades) and those that formed discrete separate pumping sections (discontinuous blades). The inducer/impeller with continuous blades showed significantly (p < 0.003) lower hemolysis with a normalized index of hemolysis (NIH) of 0.018 +/- 0.007 g/100 L (n = 3), compared with the discontinuous model, which demonstrated an NIH of 0.050 +/- 0.007 g/100 L (n = 3). The continuous blade model was evaluated in vivo for 2 days with no problems. One of the pumps evaluated ran for 5 days in vivo although thrombus formation was recognized on the flow straightener and the inducer/impeller. As a result of this study, the pump material was changed from polyether polyurethane to polycarbonate. The fabrication method was also changed to a computer numerically controlled (CNC) milling process with a final vapor polish. These changes resulted in an NIH of 0.0029 +/- 0.0009 g/100 L (n = 4), which is a significant (p < .0001) value 6 times less than that of the previous model.(ABSTRACT TRUNCATED AT 250 WORDS)
Assuntos
Coração Auxiliar/normas , Animais , Materiais Biocompatíveis/química , Materiais Biocompatíveis/metabolismo , Velocidade do Fluxo Sanguíneo , Bovinos , Simulação por Computador , Desenho de Equipamento , Feminino , Hematócrito , Hemoglobinas/análise , Hemoglobinas/metabolismo , Hemólise/fisiologia , Técnicas In Vitro , National Institutes of Health (U.S.) , Cimento de Policarboxilato/química , Cimento de Policarboxilato/metabolismo , Poliuretanos/química , Poliuretanos/metabolismo , Estados Unidos , United States National Aeronautics and Space AdministrationRESUMO
Recently, a newly developed centrifugal pump, the Baylor-Nikkiso pump, was approved for clinical use in the United States. This pump is the most compact centrifugal pump with a priming volume of only 25 ml. Although it is small, this pump can provide a flow of 4 L/min against a total pressure head of 300 mm Hg at 3,000 rpm. In vitro and in vivo validation of the Baylor-Nikkiso pump has proved that this pump could effectively reduce blood trauma even under high total head pressure. In addition, 48-h durability tests with biventricular bypass using calves verified the reliability of shaft sealing and antithrombogenicity. Clinical trials of the Baylor-Nikkiso pumps have been initiated in our department. This pump provides flows of 60-70 ml/kg/min with stable hemodynamic conditions. No leakage of thrombus formation was observed. The results of the initial clinical experience of the Baylor-Nikkiso pump suggest that it is suitable for cardiopulmonary bypass surgery.
Assuntos
Ponte Cardiopulmonar/normas , Coração Auxiliar/normas , Hemólise/fisiologia , Bombas de Infusão/normas , Animais , Materiais Biocompatíveis , Velocidade do Fluxo Sanguíneo , Bovinos , Centrifugação , Ensaios Clínicos como Assunto , Ponte de Artéria Coronária/normas , Coração Auxiliar/tendências , Humanos , Técnicas In Vitro , Trombose/prevenção & controle , Estados UnidosRESUMO
The Baylor/NASA Axial Blood Flow Pump has been developed for use as an implantable left ventricular assist device (LVAD). The pump is intended as an assist device for either pulmonary or systemic circulatory support for more than 3-months' duration. To date the pump provides acceptable results in terms of thrombus formation and hemolysis (IH of 0.018 g/100 L). A fluid dynamics analysis using flow visualization was performed to investigate the flow fields and to determine areas within the pump that could be improved. These studies focused upon the inflow area in front of the pump. A prototype axial flow pump assembly was constructed to facilitate the flow visualization studies. Particle image tracking velocimetry techniques were used to measure Amberlite particles suspended in a blood analog fluid composed of 63% water and 37% glycerin. This method used a pulsed (612 Hz) laser light to determine flow velocity profiles, shear stress, Reynolds numbers, and stagnant areas within the axial pump. These studies showed that the flow straightener (a vaned assembly in the pump inflow) reduced Reynolds numbers from 4,640 to 2,540 (at 8.5 L/min) and that the flow straightener exacerbates a discontinuity found between it and the impeller. Within the inflow area, a maximum of 80 N/m2 shear stress was measured, which is well below published blood damage thresholds. Design variations were investigated resulting in a smoother flow transition between flow straightener and impeller. These variations must be investigated further to establish a correlation with hemolysis and thrombus formation.
Assuntos
Velocidade do Fluxo Sanguíneo/fisiologia , Coração Auxiliar , Desenho de Equipamento , Hemólise , Humanos , Modelos Cardiovasculares , Próteses e Implantes , Trombose/etiologiaRESUMO
To obtain an optimal design of the left blood chamber of the total artificial heart (TAH), flow visualization studies were performed. Information on velocities in critical areas of the left chamber was gathered using sectional pulsed laser light. The flow patterns on the entire pumping duration were photographed frame by frame. The inflow port, the opposite of the inflow and outflow of the pump (bottom area), and the diaphragm/housing junction were the focal areas. The pump conditions, such as chamber pressure, preload and afterload pressure, pumping rate and roller screw, and displacement were recorded. Major stagnations and a low washout effect were observed in the bottom region. The closing of the inflow valve was irregular. In order to solve this problem, the inflow valve angle was changed 20 degrees. A comparison study showed a better valve closing characteristic, and no stagnation areas were observed with this new valve angle. Various velocity profiles confirmed the results. The valve closing characteristics is described in relationship to back flow.
Assuntos
Coração Artificial , Hemorreologia , Velocidade do Fluxo Sanguíneo , Pressão Sanguínea , Débito Cardíaco , Diástole , Desenho de Equipamento , Humanos , Lasers , Fotografação , Rotação , Propriedades de Superfície , Sístole , Trombose/prevenção & controleRESUMO
The effect of hematocrit (Ht) on in vitro hemolysis test results (i.e., index of hemolysis) was evaluated using a Baylor/NASA prototype axial flow pump. Red blood cell suspensions of six different Ht (5, 10, 15, 20, 30, 40%; n = 30) were prepared and used for this evaluation. The pump was operated for 60 min under 5 L/min flow conditions, and blood samples were taken every 10 min to measure plasma free hemoglobin levels. The normalized index of hemolysis (NIH) was calculated using the regression line slope between time and plasma free hemoglobin level, and relationships between NIH and Ht or hemoglobin (Hb) were checked. NIH and Ht had a statistically significant (p < 0.0001) correlation with a coefficient of fit of 0.976, and NIH and Hb had a statistically significant (p < 0.0001) correlation with a coefficient of fit of 0.976. To reduce the effect of Ht, NIH/Ht was proposed and compared with a modified index of hemolysis (MIH), which was normalized by the Hb level of blood. NIH/Ht and MIH had a poor correlation with Ht (coefficient of fit, 0.608) and Hb (coefficient of fit, 0.577), respectively. When blood that has a wide range of Ht or Hb values is used for in vitro hemolysis tests, NIH/Ht is suggested for use as an index of hemolysis to evaluate the hemolysis characteristics of rotary blood pumps because MIH has no dimension and it requires Hb values. In contrast, NIH/Ht has a dimension of g/100 L, which is quite understandable, and it does not require measurement of Hb levels of blood; it is therefore cost-effective.
Assuntos
Coração Auxiliar , Hematócrito , Hemólise , Animais , Bovinos , Coração Auxiliar/efeitos adversos , Hemoglobinas/análise , Técnicas In VitroRESUMO
To analyze the flow patterns of the left blood chamber of the Baylor total artificial heart (TAH) and to evaluate influences of the inflow valve angle to the flow patterns, flow visualization studies were performed. The inflow valve angle of the left housing was changed by 20 degrees orthogonal to the inflow tube, and comparison studies of the modified and unmodified models were made. For evaluating sectional flow patterns, a laser light was used, the clear transparent housing was scanned segmentally, and flow patterns were recorded on high contrast film for measuring flow velocities. A signal was used that synchronized the timing of the camera shutter to the pusher-plate movement signal. With the modified 20 degree inflow valve direction, there were better closing characteristics of the inflow valve leaflets. At the same time, we could successfully reduce the vortex formation at the inflow port, which may cause thrombus formation. We also have improved the washout during the diastolic phase in not only the bottom area, but in the entire pumping chamber. This flow visualization setup is simple and inexpensive. It is useful not only for validation of global flow patterns, but also for validation of local flow velocities of various blood pumps.
Assuntos
Coração Artificial , Engenharia Biomédica , Velocidade do Fluxo Sanguíneo , Estudos de Avaliação como Assunto , Coração Artificial/efeitos adversos , Hemodinâmica , Humanos , Técnicas In Vitro , Fluxo Sanguíneo Regional , Trombose/etiologiaRESUMO
We have developed a compact, seal-less, all-purpose centrifugal pump, the Baylor C-Gyro pump, which is intended as a long-term ventricular assist device (VAD) as well as a cardiopulmonary bypass pump. In attaining this goal, we began with eliminating the shaft seals by adopting a pivot bearing system at the impeller shaft. In addition, a ring magnet encased in the bottom of the impeller was coupled magnetically to a driver magnet placed outside the pump housing (C1 Prototype). This first model yielded satisfactory performance in vitro with a flow rate of 8 L/min against 250 mm Hg at 2,400 rpm, and an index of hemolysis (IH) of 0.0083 g/100 L using bovine blood. In the second model, the C1 Eccentric Inlet Port Model, the inlet bearing support bar in the prototype were eliminated without reducing the prototype's performance. These designs for antithrombogenicity are being tested by the first in vivo experiment, which has lasted for more than 2 weeks.
Assuntos
Coração Auxiliar , Animais , Ponte Cardiopulmonar/instrumentação , Bovinos , Desenho de Equipamento , Técnicas In VitroRESUMO
A new index "loss factor Z" defined by Eq. 1 was introduced as the absolute expression of the mock loop resistance for testing a nonpulsatile pump. [formula: see text] where gamma is specific gravity of the fluid, g is the acceleration of gravity, delta P is total pressure head, and Q is flow. Z is expected to be constant, regardless of the pumping parameters. Z values obtained in the same mock loop but with different rotary blood pumps were almost identical and were defined as Z0. New methods of analysis of the flow-restrictive conditions of various rotary blood pumps are proposed in this paper: namely, differential loss factor delta Z, and loss factor sensitivity delta Z/delta A. The proposed Z-Q curves demonstrated better performance mapping than the conventional delta P-Q curves. Delta Z is the difference between the Z-Q curves of two different pumps. A is a design parameter of the pump; therefore delta Z/delta A is a quantitative expression of the effect of the design change on the hydraulic performance. These various indices were used to analyze the internal hydraulic loss of a centrifugal pump (Gyro pump). The relationship between its gap size (rotor casing) and hydraulic performance was assessed quantitatively by these indices. In this paper, the derivation processes and above-mentioned indices are described.
Assuntos
Circulação Assistida/instrumentação , Falha de Equipamento , Modelos TeóricosRESUMO
Our newly developed axial flow pump consists of a flow tube, an internal rotating impeller, and a fixed flow stator (we call the stator) behind the impeller. This pump produces a flow of 3 to 8 L/min against 50 to 150 mm Hg pressure difference, respectively, in the range of 10,000 to 16,000 rpm. An axial flow pump that will be used as a ventricular assist device (VAD) has to have low hemolytic and good antithrombogenic characteristics. This paper will show how to decrease the hemolytic properties of this axial flow pump systematically using a test matrix. The test variables evaluated were impeller blade tip geometry, impeller flow tube clearance (radial clearance), impeller stator clearance (axial clearance), impeller blade number, stator blade number, and impeller length. All in vitro hemolysis tests were performed at 5.0 L/min against 100 mm Hg pressure difference using a total of 83 bags of fresh bovine blood. The results were as follows: the impeller blade tip geometry did not significantly effect hemolysis, a 0.005-inch and a 0.009-inch radial clearance were significantly (p < 0.01 or 0.001) less hemolytic than the other clearances, a 0.075-inch axial clearance was significantly (p < 0.05) more hemolytic than the other clearances, two- and six-bladed impellers were significantly (p < 0.01 and 0.02, respectively) less hemolytic than a four-bladed impeller, a five-bladed stator was significantly (p < 0.05 or 0.01) less hemolytic than the other stators, and the impeller length did not make a significant difference. Currently, the best index of hemolysis is 0.031 +/- 0.018 g/100 L, and using parameters from these results, implantable devices are being fabricated.
Assuntos
Coração Auxiliar , Hemólise , Animais , Bovinos , Desenho de Equipamento , Técnicas In VitroRESUMO
A cooperative effort between Baylor College of Medicine and NASA/Johnson Space Center is under way to develop an implantable left ventricular assist device for either pulmonary or systemic circulatory support for more than 3 months' duration. Using methodical evaluation and testing, an implantable axial pump has been systematically improved. These improvements include the addition of an inducer as a pumping element in front of the impeller and the construction of an efficient brushless direct current motor. To date, less than 10 W of power is required to generate 5 L/min flow against 100 mm Hg. An index of hemolysis of 0.021 g/100 L has been achieved. Two-day in vivo feasibility studies in calves are under way to evaluate the antithrombogenic nature of the pump. Further improvements in system efficiency, hemolytic performance, and the antithrombogenic nature of the pump are expected with the use of empirical studies, computer flow modeling, and in vivo testing in calves.