Nanoplasmonic terahertz photoconductive switch on GaAs.

Low-temperature (LT) grown GaAs has a subpicosecond carrier response time that makes it favorable for terahertz photoconductive (PC) switching. However, this is obtained at the price of lower mobility and lower thermal conductivity than GaAs. Here we demonstrate subpicosecond carrier sweep-out and over an order of magnitude higher sensitivity in detection from a GaAs-based PC switch by using a nanoplasmonic structure. As compared to a conventional GaAs PC switch, we observe 40 times the peak-to-peak response from the nanoplasmonic structure on GaAs. The response is double that of a commercial, antireflection coated LT-GaAs PC switch.

Single-walled carbon nanotubes as base material for THz photoconductive switching: a theoretical study from input power to output THz emission.

This paper studies the relation between photoexcitation of a single-walled carbon nanotube (SWNT) based device, and its THz output power in the context of THz photoconductive (PC) switching and THz photomixing. A detailed approach of calculating output THz power for such a device describes the effect of each parameter on the performance of the THz PC switch and highlights the design dependent achievable limits. A numerical assessment, with typical values for each parameter, shows that-subject to thermal stability of the device-SWNT based PC switch can improve the output power by almost two orders of magnitudes compared to conventional materials such as LT-GaAs.

Efficient terahertz slot-line waveguides.

We present two solutions to the challenge of radiation loss of slot-lines at terahertz frequencies: using a slot-line in a homogeneous medium, and using a slot-line on a layered substrate. A theoretical analysis of the slot-line in a homogeneous medium as a terahertz transmission line is presented. The absorption coefficient is obtained in terms of the waveguide dimensions using the field distribution of the slot-line. Results show that the slot-line in a homogeneous medium and the slot-line on a layered substrate can be effective transmission lines for terahertz waves with 2 cm(-1) and 3 cm(-1) absorption due to conductor loss. Full-wave numerical simulations using the Finite Element Method (FEM) are applied to validate the theory.