RESUMO
The thermal conductivity of solid biomass fuels is useful information in the investigation of biomass combustion behavior and the development of modeling especially in the context of large scale power generation. There are little published data on the thermal conductivity of certain types of biomass such as wheat straw, miscanthus, and torrefied woods. Much published data on wood is in the context of bulk materials. A method for determining the thermal conductivities of small particles of biomass fuels has been developed using a custom built test apparatus. Fourteen different samples of various solid biomass fuel were processed to form a homogenized pellet for analysis. The thermal conductivities of the pelletized materials were determined and compared against each other and to existing data.
RESUMO
Torrefaction is a mild thermal pretreatment (T<300°C) that improves biomass milling and storage properties. The impact of torrefaction on the gasification and oxidation reactivity of chars from torrefied and raw biomass was investigated. Thermogravimetric analysis was used to study the differences in O(2) and steam reactivity, between chars prepared from torrefied and raw willow, under both high- and low-heating-rate conditions. High-heating-rate chars were prepared at 900°C with a residence time of 2s. Low-heating-rate chars were prepared with a heating rate of 33°C/min, a maximum temperature of 850 or 1000°C, and a residence time of 30 min or 1h, respectively, at the maximum temperature. Pretreatment by torrefaction consistently reduced char reactivity. Torrefaction's impact was greatest for high-heating-rate chars, reducing reactivity by a factor of two to three. The effect of torrefaction on a residence time requirements for char burnout and gasification was estimated.