A mixed-methods study on risk perception and safety practices among unorganized construction workers in a municipal area of West Bengal.

BACKGROUND: The construction industry in India heavily relies on unorganized workers, who often lack adequate access to safety measures, placing them at significant risk of accidents and injuries. The objective was to determine risk perceptions of construction workers, and explore their safety practices, facilitators, and barriers. METHODS: A mixed-methods approach with a convergent parallel design (QUAN + qual) was undertaken. Quantitative strand included face-to-face interviews with 203 randomly selected building construction workers from 10 construction sites in five selected municipal wards in Kolkata. Questions pertained to socio-demographics, occupational characteristics, risk perception, and safety practices. The qualitative arm involved key informant interviews to unravel the facilitators and barriers affecting safety practices and nonparticipant observation. RESULTS: The perceived risk for respiratory problems due to dust, pain from carrying loads, slips, trips or falls, and heat-related illnesses was in the medium- to high category for 64.0%, 58.6%, 39.9%, and 36.5% of the study participants, respectively. However, the safety practices for these respective domains were in the good practice category for 6.9%, 4.9%, 54.2%, and 34.5% of the workers. From the qualitative arm, it was evident that availability of PPE, a conducive environment, and availability of worker-friendly technology could be important predictors of safety practices. Barriers such as time constraints and feasibility due to discomfort and expenditure were also identified. CONCLUSION: Despite high-risk perception, safety practices were not consistently good among construction workers. Further research is crucial to enhance the health and safety of unorganized workers in India.

Bandgap-universal passivation enables stable perovskite solar cells with low photovoltage loss.

The efficiency and longevity of metal-halide perovskite solar cells are typically dictated by nonradiative defect-mediated charge recombination. In this work, we demonstrate a vapor-based amino-silane passivation that reduces photovoltage deficits to around 100 millivolts (>90% of the thermodynamic limit) in perovskite solar cells of bandgaps between 1.6 and 1.8 electron volts, which is crucial for tandem applications. A primary-, secondary-, or tertiary-amino-silane alone negatively or barely affected perovskite crystallinity and charge transport, but amino-silanes that incorporate primary and secondary amines yield up to a 60-fold increase in photoluminescence quantum yield and preserve long-range conduction. Amino-silane-treated devices retained 95% power conversion efficiency for more than 1500 hours under full-spectrum sunlight at 85°C and open-circuit conditions in ambient air with a relative humidity of 50 to 60%.

Chloride-Based Additive Engineering for Efficient and Stable Wide-Bandgap Perovskite Solar Cells.

Metal halide perovskite based tandem solar cells are promising to achieve power conversion efficiency beyond the theoretical limit of their single-junction counterparts. However, overcoming the significant open-circuit voltage deficit present in wide-bandgap perovskite solar cells remains a major hurdle for realizing efficient and stable perovskite tandem cells. Here, a holistic approach to overcoming challenges in 1.8 eV perovskite solar cells is reported by engineering the perovskite crystallization pathway by means of chloride additives. In conjunction with employing a self-assembled monolayer as the hole-transport layer, an open-circuit voltage of 1.25 V and a power conversion efficiency of 17.0% are achieved. The key role of methylammonium chloride addition is elucidated in facilitating the growth of a chloride-rich intermediate phase that directs crystallization of the desired cubic perovskite phase and induces more effective halide homogenization. The as-formed 1.8 eV perovskite demonstrates suppressed halide segregation and improved optoelectronic properties.

Open-circuit and short-circuit loss management in wide-gap perovskite p-i-n solar cells.

In this work, we couple theoretical and experimental approaches to understand and reduce the losses of wide bandgap Br-rich perovskite pin devices at open-circuit voltage (VOC) and short-circuit current (JSC) conditions. A mismatch between the internal quasi-Fermi level splitting (QFLS) and the external VOC is detrimental for these devices. We demonstrate that modifying the perovskite top-surface with guanidinium-Br and imidazolium-Br forms a low-dimensional perovskite phase at the n-interface, suppressing the QFLS-VOC mismatch, and boosting the VOC. Concurrently, the use of an ionic interlayer or a self-assembled monolayer at the p-interface reduces the inferred field screening induced by mobile ions at JSC, promoting charge extraction and raising the JSC. The combination of the n- and p-type optimizations allows us to approach the thermodynamic potential of the perovskite absorber layer, resulting in 1 cm2 devices with performance parameters of VOCs up to 1.29 V, fill factors above 80% and JSCs up to 17 mA/cm2, in addition to a thermal stability T80 lifetime of more than 3500 h at 85 °C.