Measurement of the

^{140}Ce(n,γ) is a key reaction for slow neutron-capture (s-process) nucleosynthesis due to being a bottleneck in the reaction flow. For this reason, it was measured with high accuracy (uncertainty ≈5%) at the n_TOF facility, with an unprecedented combination of a high purity sample and low neutron-sensitivity detectors. The measured Maxwellian averaged cross section is up to 40% higher than previously accepted values. Stellar model calculations indicate a reduction around 20% of the s-process contribution to the Galactic cerium abundance and smaller sizeable differences for most of the heavier elements. No variations are found in the nucleosynthesis from massive stars.

Is prone positioning a valid intervention for ARDS in the deployed intensive care unit?

Prone positioning is an intervention used for patients with acute respiratory distress syndrome (ARDS) whose hypoxia is worsening despite conventional treatment. Previously used infrequently, it became an important treatment escalation strategy for hypoxia during the COVID-19 pandemic. Current evidence for prone positioning suggests increased survivability in intubated patients with moderate to severe ARDS who are prone for >12 hours a day. As a relatively low-cost, low-tech intervention with a growing evidence base, the viability of prone positioning in the deployed land environment is considered in this article. The practical technique of prone positioning is easy to teach to healthcare staff experienced in manual handling. However, it requires significant resources, in particular staff numbers, and time to execute and maintain, and necessitates a pressure-minimising mattress. Additionally, staff are placed at increased risk of musculoskeletal injuries and potential exposure to aerosolised microbes if there is a disconnection of the breathing system. We conclude that in the deployed 2/1/2/12 facility (or larger), with access to higher staff numbers and high-specification mattresses, prone positioning is a valid escalation technique for intubated hypoxic patients with ARDS. However, in smaller facilities where resources are constrained, its implementation is unlikely to be achievable.

Inter-laboratory ring trial to compare four quantitative polymerase chain reaction assays employed for detection of Mycobacterium avium subspecies paratuberculosis.

Johne's disease is an infectious enteric disease caused by Mycobacterium avium subspecies paratuberculosis (MAP) affecting ruminant species worldwide. In Project 1, an independent performance comparison ring trail was conducted between three different commercial MAP quantitative polymerase chain reaction (qPCR) assay services (B, C, and D) currently marketed in Great Britain by three separate laboratories against each other and against a fourth assay (A) not available commercially in Great Britain. A total of 205 individual ovine and bovine samples from five farms were analyzed to give 41 sets of pooled results (pool size five) from each laboratory according to their specific protocols. The numbers of positive pools for assays A-D were 18, 12, 11, and 1 (43.9%, 29.2%, 26.8%, and 2.4%), respectively. Assessment of interrater reliability produced a Fleiss' kappa coefficient of 0.15, indicating very poor overall agreement between the four laboratories. Laboratories A-D diagnosed 4, 3, 2, and 1 flocks at the farm level, respectively, as MAP positive. In Project 2, 38 pooled ovine samples from 10 flocks were analyzed to compare the performance of laboratories A and B. The numbers of positive results for laboratories A and B were 24 (63.1%) and 17 (44.7%), respectively (Cohen's kappa 0.54), indicating that laboratory A was more sensitive than B in line with results from Project 1. Variation between laboratories offering MAP qPCR assays is a significant concern, and further work is warranted to validate and standardize the performance of assays between laboratories for both ovine and bovine samples.IMPORTANCEOur study reports the findings of an inter-laboratory ring trial comparing the performance of four different quantitative polymerase chain reaction (qPCR) assay services for detecting Mycobacterium avium subspecies paratuberculosis (MAP) infection in cattle and sheep. MAP is the causative agent of Johne's disease (also known as paratuberculosis), a significant production-limiting disease in livestock populations with a worldwide distribution. The content of this paper is significant and novel as it is the first to highlight the marked variation between the diagnostic sensitivity and reproducibility of the three principal commercial laboratories offering MAP qPCR diagnostic and screening services in Great Britain. The low sensitivity and high variability between the laboratories are of great concern and relevance to veterinary practitioners and livestock producers.

Animal performance and meat quality characteristics from feedlot-finished steers fed increasing levels of wet distillers grain.

One hundred forty-four steers were group-housed in 24 pens that were randomly assigned to one of four dietary treatments defined by the proportion of wet distiller grain plus solubles (WDGS; 0, 15, 30, or 45%) and fed for 84 d pre-slaughter. Animal performance was evaluated using the pen as the experimental unit. Whereas for carcass and meat quality characteristics, meat oxidative stability, and the consumer sensory quality of longissimus thoracis muscle one animal from each pen was randomly selected and used as the experimental unit. No differences (P > 0.05) were observed for subcutaneous fat thickness, rib eye area, marbling score or pH, color parameters, proximate composition, sarcomere length, Warner Bratzler shear force, and cooking loss. Feeding WDGS linearly increased total PUFA (P = 0.05), C18:2 n-6 (P = 0.004) proportions, and n-6/n-3 ratio (P < 0.01) but reduced C16:1 to C18:0 ratio (P < 0.01). Lipid oxidation was greater in beef from steers fed 30% and 45% WDGS (P = 0.05). Dietary WDGS linearly improved (P < 0.05) flavor and overall linking score in the consumer sensory panel.

Direct Determination of Fission-Barrier Heights Using Light-Ion Transfer in Inverse Kinematics.

We demonstrate a new technique for obtaining fission data for nuclei away from ß stability. These types of data are pertinent to the astrophysical r process, crucial to a complete understanding of the origin of the heavy elements, and for developing a predictive model of fission. These data are also important considerations for terrestrial applications related to power generation and safeguarding. Experimentally, such data are scarce due to the difficulties in producing the actinide targets of interest. The solenoidal-spectrometer technique, commonly used to study nucleon-transfer reactions in inverse kinematics, has been applied to the case of transfer-induced fission as a means to deduce the fission-barrier height, among other variables. The fission-barrier height of ^{239}U has been determined via the ^{238}U(d,pf) reaction in inverse kinematics, the results of which are consistent with existing neutron-induced fission data indicating the validity of the technique.

Methods to expose subsurface objects of interest identified from 3D imaging: The intermediate sample preparation stage in the correlative microscopy workflow.

The correlative imaging workflow is a method of combining information and data across modes (e.g. SEM, X-ray CT, FIB-SEM), scales (cm to nm) and dimensions (2D-3D-4D), providing a more holistic interpretation of the research question. Often, subsurface objects of interest (e.g. inclusions, pores, cracks, defects in multilayered samples) are identified from initial exploratory nondestructive 3D tomographic imaging (e.g. X-ray CT, XRM), and those objects need to be studied using additional techniques to obtain, for example, 2D chemical or crystallographic data. Consequently, an intermediate sample preparation step needs to be completed, where a targeted amount of sample surface material is removed, exposing and revealing the object of interest. At present, there is not one singular technique for removing varied thicknesses at high resolution and on a range of scales from cm to nm. Here, we review the manual and automated options currently available for targeted sample material removal, with a focus on those methods which are readily accessible in most laboratories. We summarise the approaches for manual grinding and polishing, automated grinding and polishing, microtome/ultramicrotome, and broad-beam ion milling (BBIM), with further review of other more specialist techniques including serial block face electron microscopy (SBF-SEM), and ion milling and laser approaches such as FIB-SEM, Xe plasma FIB-SEM, and femtosecond laser/LaserFIB. We also address factors which may influence the decision on a particular technique, including the composition, shape and size of the samples, sample mounting limitations, the amount of surface material to be removed, the accuracy and/or resolution of peripheral parts, the accuracy and/or resolution of the technique/instrumentation, and other more general factors such as accessibility to instrumentation, costs, and the time taken for experimentation. It is hoped that this study will provide researchers with a range of options for removal of specific amounts of sample surface material to reach subsurface objects of interest in both correlative and non-correlative workflows.

The World Rugby and International Rugby Players Contact Load Guidelines: From conception to implementation and the future.

Managing training load in rugby union is crucial for optimising performance and injury prevention. Contact training warrants attention because of higher overall injury and head impact risk, yet players must develop physical, technical, and mental skills to withstand the demands of the game. To help coaches manage contact loads in professional rugby, World Rugby and International Rugby Players convened an expert working group. They conducted a global survey with players to develop contact load guidelines. This commentary aims to describe the contact load guidelines and their implementation, and identify areas where future work is needed to support their evolution.

Investigating Bénard-Marangoni migration at the air-water interface in the time domain using sum frequency generation (SFG) spectroscopy of palmitic acid monolayers.

Sum-frequency generation (SFG) spectroscopy is frequently used to investigate the structure of monolayer films of long-chain fatty acids at the air-water interface. Although labeled a non-invasive technique, introducing intense SFG lasers onto liquid interfaces has the potential to perturb them. In the present work, narrowband picosecond SFG is used to study the structural changes that occur in palmitic acid and per-deuterated palmitic acid monolayers at the air-water interface in response to the high field strengths inherent to SFG spectroscopy. In order to determine structural changes and identify measurement artifacts, the changes in specific resonance intensities were measured in real-time and over a broad range of surface concentrations from films spread onto a stationary Langmuir trough. Using narrowband instead of broadband SFG minimizes the overlap of the incident infrared beam in the lipid C-H stretching region with resonances from the water sub-phase. Nevertheless, narrowband SFG still generates a thermal gradient at the surface, which produces a significant decrease in local concentration in the area of the laser spot caused by Bérnard-Marangoni convection originating in the sub-phase. The decrease in concentration results in an increase in the conformational disorder and a decrease in the tilt angle of lipid tails. Crucially, it is shown that, even at the highest monolayer concentrations, this gives rise to a measurement effect, which manifests itself as a dependence on the spectral acquisition time. This effect should be taken into account when interpreting the structure of monolayer films on liquid surfaces deduced from their SFG spectra.

Chemically characterizing the cortical cell nano-structure of human hair using atomic force microscopy integrated with infrared spectroscopy (AFM-IR).

OBJECTIVE: The use of conventional microscopy and vibrational spectroscopy in the optical region to investigate the chemical nature of hair fibres on a nanometre scale is frustrated by the diffraction limit of light, prohibiting the spectral elucidation of nanoscale sub-structures that contribute to the bulk properties of hair. The aim of this work was to overcome this limitation and gain unprecedented chemical resolution of cortical cell nano-structure of hair. METHODS: The hybrid technique of AFM-IR, combining atomic force microscopy with an IR laser, circumvents the diffraction limit of light and achieves nanoscale chemical resolution down to the AFM tip radius. In this work, AFM-IR was employed on ultra-thin microtomed cross-sections of human hair fibres to spectrally distinguish and characterize the specific protein structures and environments within the nanoscale components of cortical cells. RESULTS: At first, a topographical and chemical distinction between the macrofibrils and the surrounding intermacrofibillar matrix was achieved based on 2.5 × 2.5 µm maps of cortical cell cross-sections. It was found that the intermacrofibrillar matrix has a large protein content and specific cysteine-related residues, whereas the macrofibrils showed bigger contributions from aliphatic amino acid residues and acidic-/ester-containing species (e.g. lipids). Localized spectra recorded at a spatial resolution of the order of the AFM tip radius enabled the chemical composition of each region to be determined following deconvolution of the Amide-I and Amide-II bands. This provided specific evidence for a greater proportion of α-helices in the macrofibrils and correspondingly larger contributions of ß-sheet secondary structures in the intermacrofibrillar matrix, as inferred in earlier studies. Analysis of the parallel and antiparallel ß-sheet structures, and of selected dominant amino acid residues, yielded further novel composition and conformation results for both regions. CONCLUSION: In this work, we overcome the diffraction limit of light using atomic force microscopy integrated with IR laser spectroscopy (AFM-IR) to characterize sub-micron features of the hair cortex at ultra-high spatial resolution. The resulting spectral analysis shows clear distinctions in the Amide bands in the macrofibrils and surrounding intermacrofibrillar matrix, yielding novel insight into the molecular structure and intermolecular stabilization interactions of the constituent proteins within each cortical component.

OBJECTIF: L'utilisation de la microscopie conventionnelle et de la spectroscopie vibratoire dans la région optique pour étudier la nature chimique des fibres capillaires à l'échelle nanométrique est limitée par la limite de diffraction de la lumière, interdisant l'élucidation spectrale des sous-structures à l'échelle nanométrique qui contribuent aux propriétés des cheveux en général. L'objectif de ce travail était de surmonter cette limitation et d'obtenir une résolution chimique sans précédent de la nanostructure cellulaire corticale des cheveux. MÉTHODES: La technique hybride de l'AFM-IR, combinant la microscopie à force atomique avec un laser IR, contourne la limite de diffraction de la lumière et permet d'obtenir une résolution chimique à l'échelle nanométrique jusqu'au rayon de l'extrémité de l'AFM. Dans ce travail, l'AFM-IR a été employée sur des coupes transversales microtomes ultrafines de fibres de cheveux humains pour distinguer et caractériser sur le plan spectral les structures et environnements protéiques spécifiques au sein des composants à l'échelle nanométrique des cellules corticales. RÉSULTATS: Tout d'abord, une distinction topographique et chimique entre les macrofibrilles et la matrice intermacrofibrillaire environnante a été obtenue à partir de cartes de 2,5 × 2,5 micromètres des coupes transversales des cellules corticales. Il a été constaté que la matrice intermacrofibrillaire avait une grande teneur en protéines et des résidus spécifiques liés à la cystéine, tandis que les macrofibrilles présentaient des contributions plus importantes provenant de résidus d'acides aminés aliphatiques et d'espèces acides/contenant des esters (p. ex. lipides). Les spectres localisés enregistrés à une résolution spatiale de l'ordre du rayon de l'extrémité AFM ont permis de déterminer la composition chimique de chaque région suite à la déconvolution des bandes Amide-I et Amide-II. Cela a apporté des preuves spécifiques pour une plus grande proportion des hélices alpha des macrofibrilles, de même que des contributions plus importantes des structures secondaires à feuillet bêta dans la matrice intermacrofibrillaire, déduites dans des études antérieures. L'analyse des structures parallèles et antiparallèles des feuillets bêta, et des résidus d'acides aminés dominants sélectionnés a donné des résultats inédits de composition et de conformation pour les deux régions. CONCLUSION: Dans ce travail, nous avons surmonté la limite de diffraction de la lumière en utilisant la microscopie à force atomique intégrée à la spectroscopie laser IR (IR-AFM) pour caractériser les caractéristiques submicroniques du cortex capillaire à une résolution spatiale ultra-élevée. L'analyse spectrale qui en résulte montre des distinctions nettes dans les bandes d'amide dans les macrofibrilles et la matrice intermacrofibrillaire environnante, ce qui apporte un éclairage nouveau sur la structure moléculaire et les interactions de stabilisation intermoléculaire des protéines constitutives dans chaque composant cortical.

A comparison of two assessment tools used in overviews of systematic reviews: ROBIS versus AMSTAR-2.

BACKGROUND: AMSTAR-2 is a 16-item assessment tool to check the quality of a systematic review and establish whether the most important elements are reported. ROBIS is another assessment tool which was designed to evaluate the level of bias present within a systematic review. Our objective was to compare, contrast and establish both inter-rater reliability and usability of both tools as part of two overviews of systematic reviews. Strictly speaking, one tool assesses methodological quality (AMSTAR-2) and the other assesses risk of bias (ROBIS), but there is considerable overlap between the tools in terms of the signalling questions. METHODS: Three reviewers independently assessed 31 systematic reviews using both tools. The inter-rater reliability of all sub-sections using each instrument (AMSTAR-2 and ROBIS) was calculated using Gwet's agreement coefficient (AC1 for unweighted analysis and AC2 for weighted analysis). RESULTS: Thirty-one systematic reviews were included. For AMSTAR-2, the median agreement for all questions was 0.61. Eight of the 16 AMSTAR-2 questions had substantial agreement or higher (> 0.61). For ROBIS, the median agreement for all questions was also 0.61. Eleven of the 24 ROBIS questions had substantial agreement or higher. CONCLUSION: ROBIS is an effective tool for assessing risk of bias in systematic reviews and AMSTAR-2 is an effective tool at assessing quality. The median agreement between raters for both tools was identical (0.61). Reviews that included a meta-analysis were easier to rate with ROBIS; however, further developmental work could improve its use in reviews without a formal synthesis. AMSTAR-2 was more straightforward to use; however, more response options would be beneficial.

Correlative Microscopy: a tool for understanding soil weathering in modern analogues of early terrestrial biospheres.

Correlative imaging provides a method of investigating complex systems by combining analytical (chemistry) and imaging (tomography) information across dimensions (2D-3D) and scales (centimetres-nanometres). We studied weathering processes in a modern cryptogamic ground cover from Iceland, containing early colonizing, and evolutionary ancient, communities of mosses, lichens, fungi, and bacteria. Targeted multi-scale X-ray Microscopy of a grain in-situ within a soil core revealed networks of surficial and internal features (tunnels) originating from organic-rich surface holes. Further targeted 2D grain characterisation by optical microscopy (OM), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (SEM-EDS), following an intermediate manual correlative preparation step, revealed Fe-rich nodules within the tunnels. Finally, nanotomographic imaging by focussed ion beam microscopy (FIB-SEM) revealed coccoid and filamentous-like structures within subsurface tunnels, as well as accumulations of Fe and S in grain surface crusts, which may represent a biological rock varnish/glaze. We attribute these features to biological processes. This work highlights the advantages and novelty of the correlative imaging approach, across scales, dimensions, and modes, to investigate biological weathering processes. Further, we demonstrate correlative microscopy as a means of identifying fingerprints of biological communities, which could be used in the geologic rock record and on extra-terrestrial bodies.

Spatial behaviour of sheep during the neonatal period: Preliminary study on the influence of shelter.

Effective shelter has been demonstrated to reduce neonatal lamb mortality rates during periods of inclement weather. Periods of high wind speed and rainfall have been shown to influence shelter usage; however, it is not yet known how ewe factors such as breed, age and body condition score influence shelter-seeking behaviour. This study, conducted on a working upland farm in the UK, examined impact of artificial shelter on the biological and climatic factors that influence peri-parturient ewe behaviour. Pregnant ewes (n = 147) were randomly allocated between two adjacent fields which were selected for their similarity in size, topography, pasture management, orientation to the prevailing wind and available natural shelter. In one field, three additional artificial shelters were installed to increase the available shelter for ewes, this field was designated the Test field; no additional artificial shelter was provided in the second field which was used as the Control field. Individual ewes were observed every 2 h between 0800 and 1600 for 14 continuous days to monitor their location relative to shelter. Ewe breed (Aberfield and Highlander), age (2-8 years) and body condition score were considered as explanatory variables to explain flock and individual variance in shelter-seeking behaviour and the prevalence of issues which required the intervention of the shepherd, termed 'shepherding problems'. Any ewe observed with dystocia, a dead or poor vigour lamb or who exhibited mismothering behaviour was recorded as a shepherding problem. The prevalence of these shepherding problems which necessitate human intervention represents arguably the most critical limiting factor for the successful management of commercial sheep flocks in outdoor lambing systems. Overall, ewes in the Test field with access to additional artificial shelter experienced fewer shepherding problems than those in the Control field (P < 0.05). A significant breed effect was also observed, with Highlander ewes more likely to seek shelter than Aberfield ewes (P < 0.001), and experiencing significantly fewer shepherding interventions (P < 0.05). These findings demonstrate the substantial and significant benefits to animal welfare and productivity that can be achieved through the provision of shelter in commercial, upland, outdoor lambing systems in the UK.

Shape Changes in the Mirror Nuclei

We studied the proton-rich T_{z}=-1 nucleus ^{70}Kr through inelastic scattering at intermediate energies in order to extract the reduced transition probability, B(E2;0^{+}→2^{+}). Comparison with the other members of the A=70 isospin triplet, ^{70}Br and ^{70}Se, studied in the same experiment, shows a 3σ deviation from the expected linearity of the electromagnetic matrix elements as a function of T_{z}. At present, no established nuclear structure theory can describe this observed deviation quantitatively. This is the first violation of isospin symmetry at this level observed in the transition matrix elements. A heuristic approach may explain the anomaly by a shape change between the mirror nuclei ^{70}Kr and ^{70}Se contrary to the model predictions.

Angular momentum generation in nuclear fission.

When a heavy atomic nucleus splits (fission), the resulting fragments are observed to emerge spinning1; this phenomenon has been a mystery in nuclear physics for over 40 years2,3. The internal generation of typically six or seven units of angular momentum in each fragment is particularly puzzling for systems that start with zero, or almost zero, spin. There are currently no experimental observations that enable decisive discrimination between the many competing theories for the mechanism that generates the angular momentum4-12. Nevertheless, the consensus is that excitation of collective vibrational modes generates the intrinsic spin before the nucleus splits (pre-scission). Here we show that there is no significant correlation between the spins of the fragment partners, which leads us to conclude that angular momentum in fission is actually generated after the nucleus splits (post-scission). We present comprehensive data showing that the average spin is strongly mass-dependent, varying in saw-tooth distributions. We observe no notable dependence of fragment spin on the mass or charge of the partner nucleus, confirming the uncorrelated post-scission nature of the spin mechanism. To explain these observations, we propose that the collective motion of nucleons in the ruptured neck of the fissioning system generates two independent torques, analogous to the snapping of an elastic band. A parameterization based on occupation of angular momentum states according to statistical theory describes the full range of experimental data well. This insight into the role of spin in nuclear fission is not only important for the fundamental understanding and theoretical description of fission, but also has consequences for the γ-ray heating problem in nuclear reactors13,14, for the study of the structure of neutron-rich isotopes15,16, and for the synthesis and stability of super-heavy elements17,18.

Impact of Covid-19 on farming systems in Europe through the lens of resilience thinking.

Context: Resilience is the ability to deal with shocks and stresses, including the unknown and previously unimaginable, such as the Covid-19 crisis. Objective: This paper assesses (i) how different farming systems were exposed to the crisis, (ii) which resilience capacities were revealed and (iii) how resilience was enabled or constrained by the farming systems' social and institutional environment. Methods: The 11 farming systems included have been analysed since 2017. This allows a comparison of pre-Covid-19 findings and the Covid-19 crisis. Pre-Covid findings are from the SURE-Farm systematic sustainability and resilience assessment. For Covid-19 a special data collection was carried out during the early stage of lockdowns. Results and conclusions: Our case studies found limited impact of Covid-19 on the production and delivery of food and other agricultural products. This was due to either little exposure or the agile activation of robustness capacities of the farming systems in combination with an enabling institutional environment. Revealed capacities were mainly based on already existing connectedness among farmers and more broadly in value chains. Across cases, the experience of the crisis triggered reflexivity about the operation of the farming systems. Recurring topics were the need for shorter chains, more fairness towards farmers, and less dependence on migrant workers. However, actors in the farming systems and the enabling environment generally focused on the immediate issues and gave little real consideration to long-term implications and challenges. Hence, adaptive or transformative capacities were much less on display than coping capacities. The comparison with pre-Covid findings mostly showed similarities. If challenges, such as shortage of labour, already loomed before, they persisted during the crisis. Furthermore, the eminent role of resilience attributes was confirmed. In cases with high connectedness and diversity we found that these system characteristics contributed significantly to dealing with the crisis. Also the focus on coping capacities was already visible before the crisis. We are not sure yet whether the focus on short-term robustness just reflects the higher visibility and urgency of shocks compared to slow processes that undermine or threaten important system functions, or whether they betray an imbalance in resilience capacities at the expense of adaptability and transformability. Significance: Our analysis indicates that if transformations are required, e.g. to respond to concerns about transnational value chains and future pandemics from zoonosis, the transformative capacity of many farming systems needs to be actively enhanced through an enabling environment.

Nanoscale adhesion profiling and membrane characterisation in sickle cell disease using hybrid atomic force microscopy-IR spectroscopy.

Sickle cell disease (SCD) presents a significant global health problem. At present there is no effective treatment, with most being supportive for its associated complications such as the vaso-occlusive crises that result from increased cell adhesion. Hypoxic sickle cells have previously shown greater phosphatidylserine (PS) exposure and oxidative damage, as well as being notably "stickier" suggesting that increased cell cohesion and adhesion to the blood vessel endothelium is a possible mechanism for vaso-occlusion. The present work uses the hybrid technique of atomic force microscopy nano-infrared spectroscopy (AFM-IR) to probe changes to the coefficient of friction and C-O IR intensity in SCD on a nanoscale for dried red blood cells (RBCs) fixed under conditions of hypoxia and correlates these observations with adhesive interactions at the membrane. Using functionalised AFM tips, it has been possible to probe adhesive interactions between hydrophilic and hydrophobic moieties exposed at the surface of the dried RBCs fixed under different oxygenation states and for different cell genotypes. The results are consistent with greater PS-exposure and oxidative damage in hypoxic sickle cells, as previously proposed, and also show strong correlation between localised oxidative damage and increased adhesion. A mechanistic explanation involving significant lipid tail disruption as a result of oxidative action, in combination with differing concentrations of externalised PS lipids, is proposed to explain the observed adhesion behaviour of each type of cell.

Genomic heterogeneity of Dichelobacter nodosus within and between UK sheep flocks and between age groups within a flock.

BACKGROUND: Footrot and interdigital dermatitis are endemic infectious diseases in all sheep farming regions, impairing welfare and production. The development of efficacious vaccines against the primary causative pathogen has been hampered by the extensive antigenic diversity of Dichelobacter nodosus. Understanding the heterogeneity of the pathogen within and between flocks is essential if the feasibility of bespoke vaccine production is to be assessed for use in the U.K. RESULTS: In this study 56 ewe and lamb isolates from 9 flocks were compared by D. nodosus serogroup and Multi Locus Sequence Type which provides significantly enhanced discriminatory power for molecular epidemiology. Serogroup heterogeneity between flocks ranged from two to five unique serogroups per flock. Three flocks contained isolates of two serogroups, two flocks contained isolates of three serogroups and one flock included isolates of five serogroups. Analysis of 25 isolates from one flock with high prevalence of lameness, identified that serogroup and sequence type was significantly correlated with age. Significantly higher proportion of lambs were infected with serogroup B (principally ST85) as opposed to serogroup H (principally ST86), which predominated amongst adult sheep. CONCLUSIONS: Genomic heterogeneity of the pathogen was significantly lower within flock compared to heterogenicity observed between flocks. Furthermore, this study indicates that within a flock, the host-pathogen dynamics and susceptibility to particular D. nodosus strains may be age dependent.

Triad of impairment in older people with diabetes-reciprocal relations and clinical implications.

Frailty is emerging as a new category complication of diabetes in older people. Clinically, frailty is still not well defined and mostly viewed as a decline in solely the physical domain. However, frailty is a multidimensional syndrome and the newly introduced concept of "triad of impairment" (physical, cognitive and emotional) may be a more representative of the broad nature of frailty. The components of the triad of impairment (TOI) commonly coexist and demonstrate a reciprocal relation. Diabetes in old age appears to increase the risk of the triad of impairment, which may eventually progress to disability. Therefore, older people with diabetes should be regularly assessed for the presence of these three key components. Adequate nutrition and regular resistance exercise training have been shown to have a positive impact on the long-term outcome in this population. However, the role of good glycaemic control and the use of current hypoglycaemic medications in reducing the incidence of this triad are less clear. Future research is needed to develop novel hypoglycaemic medications that not only focus on glycaemic control and cardiovascular safety but also on reducing the risk of the triad of impairment.