Transcriptomic Response of Huanglongbing-Infected Citrus sinensis Following Field Application of a Microbial Fermentation Product.

Huanglongbing (HLB) is considered the most destructive disease in Citrus production and threatens the future of the industry. Microbial-derived defense elicitors have gained recognition for their role in plant defense priming. This work assessed a 5% (V/V) microbial fermentation application (MFA) and its role in the elicitation of defense responses in HLB-infected Citrus sinensis trees following a foliar application with a pump sprayer. Using a PCR detection method, HLB infection levels were monitored in healthy and infected trees for 20months. Nutrient analysis assessed N, P, K, Ca, Mg, Mn, Zn, Fe, B, and Cu concentrations in the trees. MFA significantly increased Cu concentrations in treated trees and resulted in the stabilization of disease index (DI) in infected trees. Initial real-time qPCR analysis of defense-associated genes showed a significant increase in pathogenesis-related protein 2 (PR2) and phenylalanine ammonia lyase (PAL) gene expression in healthy and HLB-infected trees in response to MFA. Gene expression of PR2 and PAL peaked 6h post-microbial fermentation application during an 8-h sampling period. A transcriptomic assessment using GeneChip microarray of the hour 6 samples revealed differential expression of 565 genes when MFA was applied to healthy trees and 909 genes when applied infected citrus trees when compared to their respective controls. There were 403 uniquely differentially expressed genes in response to MFA following an intersectional analysis of both healthy and infected citrus trees. The transcriptomic analysis revealed that several genes associated with plant development, growth, and defense were upregulated in response to MFA, including multiple PR genes, lignin formation genes, ROS-related genes, hormone synthases, and hormone regulators. This study provides further evidence that MFA may play an important role as a plant elicitor in an integrated pest management strategy in citrus and other agronomically important crops.

A scalable metal-organic framework as a durable physisorbent for carbon dioxide capture.

Metal-organic frameworks (MOFs) as solid sorbents for carbon dioxide (CO2) capture face the challenge of merging efficient capture with economical regeneration in a durable, scalable material. Zinc-based Calgary Framework 20 (CALF-20) physisorbs CO2 with high capacity but is also selective over water. Competitive separations on structured CALF-20 show not just preferential CO2 physisorption below 40% relative humidity but also suppression of water sorption by CO2, which was corroborated by computational modeling. CALF-20 has a low enthalpic regeneration penalty and shows durability to steam (>450,000 cycles) and wet acid gases. It can be prepared in one step, formed as composite materials, and its synthesis can be scaled to multikilogram batches.

A Novel Self-Assembly Strategy for the Fabrication of Nano-Hybrid Satellite Materials with Plasmonically Enhanced Catalytic Activity.

The generation of hydrogen from water using light is currently one of the most promising alternative energy sources for humankind but faces significant barriers for large-scale applications due to the low efficiency of existing photo-catalysts. In this work we propose a new route to fabricate nano-hybrid materials able to deliver enhanced photo-catalytic hydrogen evolution, combining within the same nanostructure, a plasmonic antenna nanoparticle and semiconductor quantum dots (QDs). For each stage of our fabrication process we probed the chemical composition of the materials with nanometric spatial resolution, allowing us to demonstrate that the final product is composed of a silver nanoparticle (AgNP) plasmonic core, surrounded by satellite Pt decorated CdS QDs (CdS@Pt), separated by a spacer layer of SiO2 with well-controlled thickness. This new type of photoactive nanomaterial is capable of generating hydrogen when irradiated with visible light, displaying efficiencies 300% higher than the constituting photo-active components. This work may open new avenues for the development of cleaner and more efficient energy sources based on photo-activated hydrogen generation.

Non-peptidyl small molecule, adenosine, 5'-Se-methyl-5'-seleno-, 2',3'-diacetate, activates insulin receptor and attenuates hyperglycemia in type 2 diabetic Leprdb/db mice.

The pathophysiology of type 2 diabetes mellitus (T2D) is characterized by reduced or absent insulin receptor (INSR) responsiveness to its ligand, elevated hepatic glucose output and impaired glucose uptake in peripheral tissues, particularly skeletal muscle. Treatments to reduce hyperglycemia and reestablish normal insulin signaling are much sought after. Any agent which could be orally administered to restore INSR function, in an insulin-independent manner, would have major implications for the management of this global disease. We have discovered a non-peptidyl small molecule, adenosine, 5'-Se-methyl-5'-seleno-, 2',3'-diacetate [referred to as non-peptidyl compound #43 (NPC43)], which restores INSR signaling in the complete absence of insulin. Initial screening of numerous compounds in human HepG2 liver cells revealed that NPC43 significantly inhibited glucose production. The compound was potently anti-hyperglycemic and anti-hyperinsulinemic in vivo, in insulin-resistant T2D Leprdb/db mice, following either acute or chronic treatment by oral gavage and intraperitoneal injection, respectively. The compound acted at the level of INSR and activated it in both liver and skeletal muscle of Leprdb/db mice. In cell culture, the compound activated INSR in both liver and skeletal muscle cells; furthermore, it cooperated with insulin to depress glucose-6-phosphatase catalytic subunit (G6pc) expression and stimulate glucose uptake, respectively. Our results indicated that the compound directly interacted with INSRα, triggering appropriate phosphorylation and activation of the receptor and its downstream targets. Unlike insulin, NPC43 did not activate insulin-like growth factor 1 receptor in either liver or skeletal muscle. We believe this compound represents a potential oral and/or injectable insulin replacement therapy for diabetes and diseases associated with insulin resistance.

Ripplocations provide a new mechanism for the deformation of phyllosilicates in the lithosphere.

Deformation in Earth's lithosphere is localised in narrow, high-strain zones. Phyllosilicates, strongly anisotropic layered minerals, are abundant in these rocks, where they accommodate much of the strain and play a significant role in inhibiting or triggering earthquakes. Until now it was understood that phyllosilicates could deform only by dislocation glide along layers and could not accommodate large strains without cracking and dilation. Here we show that a new class of atomic-scale defects, known as ripplocations, explain the development of layer-normal strain without brittle damage. We use high-resolution transmission electron microscopy (TEM) to resolve nano-scale bending characteristic of ripplocations in the phyllosilicate mineral biotite. We demonstrate that conjugate delamination arrays are the result of elastic strain energy release due to the accumulation of layer-normal strain in ripplocations. This work provides the missing mechanism necessary to understand phyllosilicate deformation, with important rheological implications for phyllosilicate bearing seismogenic faults and subduction zones.

Tuning HIV drug release from a nanogel-based in situ forming implant by changing nanogel size.

HIV is a global public health threat and requires life-long, daily oral dosing to effectively treat. This pill burden often results in poor adherence to the medications. An injectable in situ forming implant with tuneable drug release kinetics would allow patients to replace some of their daily pills with a single infrequent injection. In this work, we investigate how the size of poly(N-isopropylacrylamide) (polyNIPAm) nanogels influences the long-acting release behaviour of the HIV drug lopinavir from an in situ forming implant. Four sizes of polyNIPAm nanogels were prepared with mean diameters of 65, 160, 310 and 450 nm as characterised by dynamic light scattering. These nanogels all displayed synergistic dual stimuli responsive behaviour by aggregating only upon heating above 31 °C at physiological ionic strength. Mixing the nanogels with solid drug nanoparticles (SDNs) of lopinavir and exposing this concentrated dispersion to physiological temperature and ionic strength resulted in the in situ formation of nanocomposite implants. Three different loadings of the SDNs (33, 50 and 66% w/w) with each of the nanogels were prepared. The drug release behaviour and stability of these nanocomposite implants were then assessed in vitro over 360 hours. All samples displayed a single phase of drug release and application of the Ritger-Peppas equation indicated Fickian diffusion. Nanocomposites with the lowest loading of SDNs (33%) showed a linear relationship between nanogel diameter and the dissolution constant. These results show an attractive method for tuning the release of lopinavir from in situ loading implants with high drug loadings.

Contractile Response of Bovine Lateral Saphenous Vein to Ergotamine Tartrate Exposed to Different Concentrations of Molecularly Imprinted Polymer.

Ergot alkaloids, in their active isomeric form, affect animal health and performance, and adsorbents are used to mitigate toxicities by reducing bioavailability. Adsorbents with high specificity (molecularly imprinted polymers: MIP) adsorb ergot alkaloids in vitro, but require evaluation for biological implications. Using ex vivo myography, synthetic polymers were evaluated for effects on the bioactivity of ergotamine tartrate (ETA). Polymers were first evaluated using isotherms. Lateral saphenous veins were collected from 17 steers for four independent studies: dose response of ETA, adsorbent dose response, validation of pre-myograph incubation conditions and MIP/ non-molecularly imprinted polymer (NIP) comparison. Norepinephrine normalized percent contractile response to increasing ETA exhibited a sigmoidal dose response (max: 88.47 and log of the effective molar concentration (EC50) (-log [ETA]) of 6.66 ± 0.17 M). Although sample preparation time affected contractile response (p < 0.001), pre-myograph incubation temperature (39 vs. 21 °C, 1 h) had no effect (p > 0.05). Isothermal adsorption showed a maximum adsorption of 3.27E-008 moles·mg-1 and affinity between 0.51 and 0.57 mg (R²: 0.83-0.92) for both polymers, with no significant difference between polymers (p > 0.05). No significant differences in maximum inhibitory (p = 0.96) and IC50 responses (p = 0.163) between MIP and NIP were noticed. Normalized percent contraction could be predicted from the in vitro adsorption data (R² = 0.87, p < 0.01), for both polymers. These studies indicate that synthetic polymers are potentially effective adsorbents to mitigate ergot toxicity caused by ergot alkaloids, with little evidence of significant differences between MIP and NIP in aqueous media.

Achieving Superprotonic Conduction in Metal-Organic Frameworks through Iterative Design Advances.

Two complementary design strategies, isomorphous ligand replacement and heterocycle doping, have been applied to iteratively enhance the proton conductivity of a metal-organic framework, ß-PCMOF2. The resulting materials, PCMOF21/2(Pz) and PCMOF21/2(Tz) (Pz = 1H-pyrazole, Tz = 1H-1,2,4-triazole), have their proton conduction raised almost 2 orders of magnitude compared to ß-PCMOF2. The bulk conductivities of these materials are over 10-1 S cm-1 at 85 °C and 90% relative humidity (RH), while maintaining the parent MOF structure. A solid state synthetic route for doping 1-D channels is also presented.

Bi4O4Cu1.7Se2.7Cl0.3: Intergrowth of BiOCuSe and Bi2O2Se Stabilized by the Addition of a Third Anion.

Layered two-anion compounds are of interest for their diverse electronic properties. The modular nature of their layered structures offers opportunities for the construction of complex stackings used to introduce or tune functionality, but the accessible layer combinations are limited by the crystal chemistries of the available anions. We present a layered three-anion material, Bi4O4Cu1.7Se2.7Cl0.3, which adopts a new structure type composed of alternately stacked BiOCuSe and Bi2O2Se-like units. This structure is accessed by inclusion of three chemically distinct anions, which are accommodated by aliovalently substituted Bi2O2Se0.7Cl0.3 blocks coupled to Cu-deficient Bi2O2Cu1.7Se2 blocks, producing a formal charge modulation along the stacking direction. The hypothetical parent phase Bi4O4Cu2Se3 is unstable with respect to its charge-neutral stoichiometric building blocks. The complex layer stacking confers excellent thermal properties upon Bi4O4Cu1.7Se2.7Cl0.3: a room-temperature thermal conductivity (κ) of 0.4(1) W/mK was measured on a pellet with preferred crystallite orientation along the stacking axis, with perpendicular measurement indicating it is also highly anisotropic. This κ value lies in the ultralow regime and is smaller than those of both BiOCuSe and Bi2O2Se. Bi4O4Cu1.7Se2.7Cl0.3 behaves like a charge-balanced semiconductor with a narrow band gap. The chemical diversity offered by the additional anion allows the integration of two common structural units in a single phase by the simultaneous and coupled creation of charge-balancing defects in each of the units.

Voltage Controlled Hot Carrier Injection Enables Ohmic Contacts Using Au Island Metal Films on Ge.

We introduce a new approach to creating low-resistance metal-semiconductor ohmic contacts, illustrated using high conductivity Au island metal films (IMFs) on Ge, with hot carrier injection initiated at low applied voltage. The same metallization process simultaneously allows ohmic contact to n-Ge and p-Ge, because hot carriers circumvent the Schottky barrier formed at metal/n-Ge interfaces. A 2.5× improvement in contact resistivity is reported over previous techniques to achieve ohmic contact to both n- and p- semiconductor. Ohmic contacts at 4.2 K confirm nonequilibrium current transport. Self-assembled Au IMFs are strongly orientated to Ge by annealing near the Au/Ge eutectic temperature. Au IMF nanostructures form, provided the Au layer is below a critical thickness. We anticipate that optimized IMF contacts may have applicability to many material systems. Optimizing this new paradigm for metal-semiconductor contacts offers the prospect of improved nanoelectronic systems and the study of voltage controlled hot holes and electrons.

Room Temperature Magnetically Ordered Polar Corundum GaFeO3 Displaying Magnetoelectric Coupling.

The polar corundum structure type offers a route to new room temperature multiferroic materials, as the partial LiNbO3-type cation ordering that breaks inversion symmetry may be combined with long-range magnetic ordering of high spin d5 cations above room temperature in the AFeO3 system. We report the synthesis of a polar corundum GaFeO3 by a high-pressure, high-temperature route and demonstrate that its polarity arises from partial LiNbO3-type cation ordering by complementary use of neutron, X-ray, and electron diffraction methods. In situ neutron diffraction shows that the polar corundum forms directly from AlFeO3-type GaFeO3 under the synthesis conditions. The A3+/Fe3+ cations are shown to be more ordered in polar corundum GaFeO3 than in isostructural ScFeO3. This is explained by DFT calculations which indicate that the extent of ordering is dependent on the configurational entropy available to each system at the very different synthesis temperatures required to form their corundum structures. Polar corundum GaFeO3 exhibits weak ferromagnetism at room temperature that arises from its Fe2O3-like magnetic ordering, which persists to a temperature of 408 K. We demonstrate that the polarity and magnetization are coupled in this system with a measured linear magnetoelectric coupling coefficient of 0.057 ps/m. Such coupling is a prerequisite for potential applications of polar corundum materials in multiferroic/magnetoelectric devices.

Preparation of micro-foils for TEM/STEM analysis from metallic powders.

A technique has been developed which facilitates the preparation of electro-polished micro-foil transmission electron microscopy (TEM) specimens, which have previously been machined out of ≈100 µm diameter metallic powder particles using a Focussed Ion Beam (FIB) instrument. The technique can be used to create small volume TEM specimens from most metallic powder particles and bulk metal samples. This is especially useful when the matrices are ferritic steels, which are often difficult to image in the electron microscope, since the necessary aberration corrections change as the sample is tilted in the magnetic field of the objective lens. Small samples, such as powder particles, were attached to gold support grids using deposited platinum and were then ion milled to approximately 2 µm thickness in a focussed ion beam (FIB) instrument. Subsequently, the specimen assemblies were electropolished for short durations under standard conditions, to produce large (5 µm×5 µm) electron transparent regions of material. The specimens produced by this technique were free from FIB related artefacts and facilitated atomic resolution scanning-TEM (STEM) imaging of ferritic and nickel matrices containing, for example, yttrium rich oxide nano-dispersoids.

Dietary antioxidant supplementation enhances lipid and protein oxidative stability of chicken broiler meat through promotion of antioxidant enzyme activity.

Recent nutrigenomic studies have shown that animal nutrition can have a major influence on tissue gene expression. Dietary antioxidant supplements can enhance the quality of meat through modification of tissue metabolic processes. This study investigated the influence of dietary antioxidants and quality of oil on the oxidative and enzymatic properties of chicken broiler breast meat stored in an oxygen-enriched package (HiOx: 80% O2/20% CO2) in comparison with air-permeable polyvinylchloride (PVC) or skin packaging systems during retail display at 2 to 4°C for up to 21 d. Broilers were fed either a diet with a low-oxidized (peroxide value 23 mEq of O2/kg) or high-oxidized (peroxide value 121 mEq of O2/kg) oil, supplemented with or without an algae-based Se yeast and organic mineral antioxidant pack for 42 d. Lipid and protein oxidation and tissue enzymatic activity were analyzed. In all packaging systems, lipid oxidation (TBA reactive substances) was inhibited by up to 32.5% (P < 0.05) with an antioxidant-supplemented diet when compared with diets without antioxidants, particularly in the HiOx and PVC systems. Protein sulfhydryls were significantly protected by antioxidant diets (e.g., by 14.6 and 17.8% for low-and high-oxidized dietary groups, respectively, in PVC d 7 samples). Glutathione peroxidase, catalase, and superoxide dismutase activities were significantly higher (P < 0.05) in antioxidant-supplemented diets compared with the basal diet, regardless of oil quality. Also, serum carbonyls were lower in broilers fed a low-oxidized antioxidant-supplemented treatment. The results demonstrate that dietary antioxidants can minimize the oxidative instability of proteins and lipids, and the protection may be linked to improved cellular antioxidant enzymatic activity.

Enhancing proton conduction in a metal-organic framework by isomorphous ligand replacement.

Using the concept of isomorphous replacement applied to entire ligands, a C(3)-symmetric trisulfonate ligand was substituted with a C(3)-symmetric tris(hydrogen phosphonate) ligand in a proton conducting metal-organic framework (MOF). The resulting material, PCMOF2½, has its proton conduction raised 1.5 orders of magnitude compared to the parent material, to 2.1 × 10(-2) S cm(-1) at 90% relative humidity and 85 °C, while maintaining the parent MOF structure.

A water-stable metal-organic framework with highly acidic pores for proton-conducting applications.

Metal-organic framework (MOF) materials are a nontraditional route to ion conductors, but their crystallinity can give insight into molecular-level transport mechanisms. However, some MOFs can be structurally compromised in humid environments. A new 3D metal-organic framework, PCMOF-5, is reported which conducts protons above 10(-3) S/cm at 60 °C and 98% relative humidity. The MOF contains free phosphonic acid groups, shows high humidity stability, and resists swelling in the presence of hydration. Channels filled with crystallographically located water and acidic groups are also observed.

Gene expression profiling reveals differential effects of sodium selenite, selenomethionine, and yeast-derived selenium in the mouse.

The essential trace mineral selenium is an important determinant of oxidative stress susceptibility, with several studies showing an inverse relationship between selenium intake and cancer. Because different chemical forms of selenium have been reported to have varying bioactivity, there is a need for nutrigenomic studies that can comprehensively assess whether there are divergent effects at the molecular level. We examined the gene expression profiles associated with selenomethionine (SM), sodium selenite (SS), and yeast-derived selenium (YS) in the intestine, gastrocnemius, cerebral cortex, and liver of mice. Weanling mice were fed either a selenium-deficient (SD) diet (<0.01 mg/kg diet) or a diet supplemented with one of three selenium sources (1 mg/kg diet, as either SM, SS or YS) for 100 days. All forms of selenium were equally effective in activating standard measures of selenium status, including tissue selenium levels, expression of genes encoding selenoproteins (Gpx1 and Txnrd2), and increasing GPX1 enzyme activity. However, gene expression profiling revealed that SS and YS were similar (and distinct from SM) in both the expression pattern of individual genes and gene functional categories. Furthermore, only YS significantly reduced the expression of Gadd45b in all four tissues and also reduced GADD45B protein levels in liver. Taken together, these results show that gene expression profiling is a powerful technique capable of elucidating differences in the bioactivity of different forms of selenium.

Use of stringent selection parameters for the identification of possible selenium-responsive marker genes in mouse liver and gastrocnemius.

Selenium is a trace element that, although toxic in higher concentrations, is essential for human and animal health. In this study, we looked at microarray-based gene expression patterns from liver and gastrocnemius tissues in mice fed either a selenium-deficient diet or diets containing sodium selenite, selenomethionine, or a yeast-derived selenium supplement. A p value cutoff of 0.01 was used to identify a select set of selenium-responsive genes that were consistently differentially expressed across three age groups of mice with both ANOVA and t test analyses. A total of 19 gene transcripts were found to be differentially expressed across the three age groups with at least one selenium-deficient/selenium-supplemented diet comparison. Of those 19 genes, 12 had been previously identified as selenoprotein-encoding genes, and four of the genes, Gpx1, Selh, Sep15, and Sepw1, were differentially expressed in both tissues, all three mouse age groups, and all three diet comparisons. Activities associated with non-selenoproteins encoded by selenium-responsive genes included transport and stress response. The selenophosphate synthetase 2 gene Sephs2 in gastrocnemius tissue and the solute carrier gene Slc48a1 in liver tissue, both up-regulated with selenium-deficient diets compared to all three selenium-supplemented diets, are previously overlooked candidates for dietary selenium marker genes.

Disproportionation and radical formation in the coordination of "GaI" with bis(imino)pyridines.

Attempted coordination of "Ga(I)I" with two new sterically bulky, aryl substituted bis(imino)pyridine ligands lead to Ga(III) species [2,6-{ArN=CPh}(2)(NC(5)H(3))]GaI(2)(+)GaI(4)(-) (Ar = 2,5-(t)Bu(2)C(6)H(3), 2,6-(i)Pr(2)C(6)H(3) = Dipp) arising from thermodynamically favorable disproportionation reactions. Examination of these reactions lead to isolation of a neutral radical species [2,6-{DippN=CPh}(2)(NC(5)H(3))]GaI(2). Both EPR spectroscopy and DFT calculations on this compound indicate that the unpaired electron is localized in a di(imino)pyridine pi* orbital of an anionic ligand with nearly zero contribution from the Ga or I centers. Reaction of {2,5-(t)Bu(2)C(6)H(3)N=CPh}(2)(NC(5)H(3)) with AlCl(3) yielded an analogous Al(iii) product, [{2,5-(t)Bu(2)C(6)H(3)N=CPh}(2)(NC(5)H(3))]AlCl(2)(+)AlCl(4)(-).

An amine-functionalized metal organic framework for preferential CO(2) adsorption at low pressures.

A metal organic framework with amine-lined pores gives high values for surface area and heat of adsorption with CO(2) gas.