Experimental and computational characterization of phase transitions in CsB3H8.

Metal hydroborates are versatile materials with interesting properties related to energy storage and cation conductivity. The hydrides containing B3H8- (triborane, or octahydrotriborate) ions have been at the center of attention for some time as reversible intermediates in the decomposition of BH4- (3BH4-↔ B3H8- + 2H2), and as conducting media in electrolytes based on boron-hydride cage clusters. We report here the first observation of two phase transitions in CsB3H8 prior to its decomposition above 230 °C. The previously reported orthorhombic room temperature phase (here named α-CsB3H8) with the space group Ama2 changes into a new phase with the space group Pnma at 73 °C (here named ß-CsB3H8), and then into a face-centered cubic phase, here named γ-CsB3H8, at 88 °C. These phases are not stable at room temperature thus requiring in situ measurements for their characterization. The phase transitions and decomposition pathway of CsB3H8 were studied with in situ synchrotron powder X-ray diffraction (SR-PXD), in situ and ex situ vibrational spectroscopies (Raman and FTIR), and differential-scanning calorimetry combined with thermo-gravimetric analysis (DSC-TGA). The structure determination was validated by vibrational spectroscopy analysis and modeling of the periodic structures by density functional methods. In γ-CsB3H8, a significant disorder in B3H8- positions and orientations was found which can potentially benefit cation conducting properties through the paddle mechanism.

Small-Angle Neutron Scattering Characterization of SrCl2-ENG Composites for Thermochemical Heat Storage.

This work presents an in situ nanoscale structural characterization of a SrCl2-expanded natural graphite (ENG) composite during ammonia absorption and desorption using small-angle neutron scattering (SANS) together with X-ray powder diffraction and sorption measurements. For the processing of the composite material SANS patterns, we developed and implemented two methods, which showed comparable results. The study allowed following the evolution of the SrCl2 particles and the nanopores inside the particles during five sorption cycles. The structural changes were compared to the absorption and desorption kinetic measurements, allowing us to make qualitative analysis of the impact of the structural changes on the material properties, such as thermal conductivity and permeability. It was shown that the structural evolution of the composite material did not affect the desorption rate but significantly influenced the absorption rate after the first cycle. We also observed a significant improvement of the absorption kinetics due to the formation of nanopores in the fully deammoniated sample. In addition, the ENG matrix was shown to hinder the agglomeration of the SrCl2 particles during sorption processes, which is in contrast to literature findings reported for a nonsupported metal halide. The findings presented in this study can be of great interest in the research areas where SrCl2-ENG composites are widely studied, i.e., heat storage, heat pumps/refrigerators, deNOx removal, and solid-state ammonia storage.

Synthesis and characterization of Magnesium-Iron-Cobalt complex hydrides.

The formation, structure and deuterium desorption properties of Mg2FexCo(1-x)Dy (0 ≤ x ≤ 1 and 5 ≤ y ≤ 6) complex hydrides were investigated. The synthesis was carried out by reactive ball milling, using a mixture of powders of the parent elements in D2 atmosphere. The formation of quaternary deuterides was identified from Rietveld refinements of powder X-Ray diffraction and powder neutron diffraction patterns, and from infrared attenuated total reflectance analysis. It was observed that the crystal structure of deuterides depends on the transition metal fraction. For Co-rich compositions, i.e. up to x = 0.1, hydrides have the tetragonal distorted CaF2-type structure (space group P4/nmm) of Mg2CoD5 at room temperature. For Fe-rich compositions, i.e. x ≥ 0.5, a cubic hydride is observed, with the same K2PtCl6-type structure (space group Fm[Formula: see text]m) as Mg2FeD6 and as Mg2CoD5 at high temperatures. For x = 0.3, both the cubic and the tetragonal deuterides are detected. Differential scanning calorimetry coupled with thermogravimetric and temperature programmed desorption analyses show rather similar deuterium desorption properties for all samples, without significant changes as a function of composition. Finally, hydrogen sorption experiments performed for Mg2Fe0.5Co0.5H5.5 at 30 bar of H2 and 673 K showed reversible reactions, with good kinetic for both absorption and desorption of hydrogen.

Mechanochemistry of Metal Hydrides: Recent Advances.

This paper is a collection of selected contributions of the 1st International Workshop on Mechanochemistry of Metal Hydrides that was held in Oslo in May 2018. In this paper, the recent developments in the use of mechanochemistry to synthesize and modify metal hydrides are reviewed. A special emphasis is made on new techniques beside the traditional way of ball milling. High energy milling, ball milling under hydrogen reactive gas, cryomilling and severe plastic deformation techniques such as High-Pressure Torsion (HPT), Surface Mechanical Attrition Treatment (SMAT) and cold rolling are discussed. The new characterization method of in-situ X-ray diffraction during milling is described.

Optimization of magnetic properties in fast consolidated SrFe12O19 nanocrystallites.

The magnetic properties of SrFe12O19 nanocrystallites produced by hydrothermal synthesis and consolidated by Spark Plasma Sintering (SPS) were optimized by varying the compaction parameters: sintering time, sintering temperature, uniaxial pressure or pre-compaction in a magnetic field. Highly textured compacts with a high degree of crystallite alignment were produced. Qualitative and quantitative textural information was obtained based on X-ray diffraction pole figure measurements. The optimum sintering conditions, relating the degree of alignment and bulk magnetic properties, were identified based on the resulting magnetic properties. It was found that one must strike a balance between the degree of crystallite alignment for high saturation magnetisation and coercivity (H c) to gain the highest energy product (BHmax). It was found that the coercive field drops when the crystallite alignment increases. This was particularly pronounced in the case of magnetically pre-aligned powders prior to SPS, where H c and BHmax decreased as the pellets became increasingly textured. The best BHmax value of 29(4) kJ m-3 was found for the sample sintered at 950 °C for 2 minutes with an applied pressure of 100 MPa for a powder pre-aligned in an applied field of 0.55 T. The results presented here show the potential of SPS consolidation of SrFe12O19 with high relative densities and emphasize the effect of the degree of alignment on the decrease of coercive field and its influence on the magnetic performance.

Structural, microstructural and magnetic evolution in cryo milled carbon doped MnAl.

The low cost, rare earth free τ-phase of MnAl has high potential to partially replace bonded Nd2Fe14B rare earth permanent magnets. However, the τ-phase is metastable and it is experimentally difficult to obtain powders suitable for the permanent magnet alignment process, which requires the fine powders to have an appropriate microstructure and high τ-phase purity. In this work, a new method to make high purity τ-phase fine powders is presented. A high purity τ-phase Mn0.55Al0.45C0.02 alloy was synthesized by the drop synthesis method. The drop synthesized material was subjected to cryo milling and  followed by a flash heating process. The crystal structure and microstructure of the drop synthesized, cryo milled and flash heated samples were studied by X-ray in situ powder diffraction, scanning electron microscopy, X-ray energy dispersive spectroscopy and electron backscatter diffraction. Magnetic properties and magnetic structure of the drop synthesized, cryo milled, flash heated  samples were characterized by magnetometry and neutron powder diffraction, respectively. The results reveal that the 2 and 4 hours cryo milled and flash heated samples both exhibit high τ-phase purity and micron-sized round particle shapes. Moreover, the flash heated samples display high saturation magnetization as well as increased coercivity.

Effect of additives, ball milling and isotopic exchange in porous magnesium borohydride.

Magnesium borohydride (Mg(BH4)2) is a promising material for solid state hydrogen storage. However, the predicted reversible hydrogen sorption properties at moderate temperatures have not been reached due to sluggish hydrogen sorption kinetics. Hydrogen (H) → deuterium (D) exchange experiments can contribute to the understanding of the stability of the BH4 - anion. Pure γ-Mg(BH4)2, ball milled Mg(BH4)2 and composites with the additives nickel triboride (Ni3B) and diniobium pentaoxide (Nb2O5) have been investigated. In situ Raman analysis demonstrated that in pure γ-Mg(BH4)2 the isotopic exchange reaction during continuous heating started at ∼80 °C, while the ball milled sample did not show any exchange at 3 bar D2. However, during ex situ exchange reactions investigated by infrared (IR) and thermogravimetric (TG) analyses a comparable H → D exchange during long exposures (23 h) to deuterium atmosphere was observed for as received, ball milled and γ-Mg(BH4)2 + Nb2O5, while the Ni3B additive hindered isotopic exchange. The specific surface areas (SSA) were shown to be very different for as received γ-Mg(BH4)2, BET area = 900 m2 g-1, and ball milled Mg(BH4)2, BET area = 30 m2 g-1, respectively, and this explains why no gas-solid H(D) diffusion was observed for the ball milled (amorphous) Mg(BH4)2 during the short time frames of in situ Raman measurements. The heat treated ball milled sample partially regained the porous γ-Mg(BH4)2 structure (BET area = 560 m2 g-1). This in combination with the long reaction times allowing for the reaction to approach equilibrium explains the observed gas-solid H(D) diffusion during long exposure. We have also demonstrated that a small amount of D can be substituted in both high surface area and low surface area samples at room temperature proving that the B-H bonds in Mg(BH4)2 can be challenged at these mild conditions.

Extending the applicability of the Goldschmidt tolerance factor to arbitrary ionic compounds.

Crystal structure determination is essential for characterizing materials and their properties, and can be facilitated by various tools and indicators. For instance, the Goldschmidt tolerance factor (T) for perovskite compounds is acknowledged for evaluating crystal structures in terms of the ionic packing. However, its applicability is limited to perovskite compounds. Here, we report on extending the applicability of T to ionic compounds with arbitrary ionic arrangements and compositions. By focussing on the occupancy of constituent spherical ions in the crystal structure, we define the ionic filling fraction (IFF), which is obtained from the volumes of crystal structure and constituent ions. Ionic compounds, including perovskites, are arranged linearly by the IFF, providing consistent results with T. The linearity guides towards finding suitable unit cell and composition, thus tackling the main obstacle for determining new crystal structures. We demonstrate the utility of the IFF by solving the structure of three hydrides with new crystal structures.

Isotopic Exchange in Porous and Dense Magnesium Borohydride.

Magnesium borohydride (Mg(BH4)2) is one of the most promising complex hydrides presently studied for energy-related applications. Many of its properties depend on the stability of the BH4(-) anion. The BH4(-) stability was investigated with respect to H→D exchange. In situ Raman measurements on high-surface-area porous Mg(BH4 )2 in 0.3 MPa D2 have shown that the isotopic exchange at appreciable rates occurs already at 373 K. This is the lowest exchange temperature observed in stable borohydrides. Gas-solid isotopic exchange follows the BH4(-) +D˙ →BH3D(-) +H˙ mechanism at least at the initial reaction steps. Ex situ deuteration of porous Mg(BH4)2 and its dense-phase polymorph indicates that the intrinsic porosity of the hydride is the key behind the high isotopic exchange rates. It implies that the solid-state H(D) diffusion is considerably slower than the gas-solid H→D exchange reaction at the surface and it is a rate-limiting steps for hydrogen desorption and absorption in Mg(BH4)2.

Destabilization effect of transition metal fluorides on sodium borohydride.

The effect of transition metal fluorides on the decomposition of NaBH4 has been investigated for NaBH4 ball milled with TiF3, MnF3 or FeF3. The compounds were examined by thermal programmed desorption with residual gas analysis, thermo gravimetric analysis and volumetric measurements using a Sieverts-type apparatus. The phase formation process during thermal decomposition was studied by in situ synchrotron radiation powder X-ray diffraction on the as-milled powders. NaBF4 was among the products in all mechano-chemical reactions. (11)B-NMR spectra analysis gave NaBF4 : NaBH4 ratios of 1 : 150 for Na-Ti, 1 : 40 for Na-Mn, and 1 : 10 for Na-Fe. Pure NaBH4 possessed a hydrogen release onset temperature of 430 °C. The hydrogen release in the NaBH4-MnF3 system began as low as 130 °C. FeF3 decreased the onset temperature to 161 °C and TiF3 to 200 °C. TiF3 reacted completely with NaBH4 below 320 °C. All the examined systems have negligible emissions of diborane species. H-sorption studies performed at selected temperatures above 300 °C exhibited relatively fast desorption kinetics. Partial hydrogen re-absorption was observed for the Na-Mn and Na-Fe samples.

Hydride formation in Mg-based systems processed by reactive milling.

The possibilities to produce quaternary Mg-based transition-metal complex hydrides have been explored. Mg2Mn1--xFex (x = 0.5, 0) elemental powder mixtures were ball milled in a reactive D2 atmosphere (about 5 MPa). The results were compared with the formation of Mg2(FeD6)0.5(CoD5)0.5 from Mg-Fe-Co powders. The changes of D2 pressure were monitored during milling and deuterium absorption was detected within the first 15 h of milling. Powder X-ray and neutron diffraction analysis for the as-milled Mg2Mn0.5Fe0.5 powder showed a large fraction of unreacted elemental Mn, as well as the formation of a cubic K2PtCl6-type phase (a = 6.452 A). The latter could be identified as Mg2FeD6. Infrared spectroscopy confirmed the presence of [FeD6]4- anions (stretching band at 1261 cm(-1)) and ruled out the formation of [MnH6]5- complexes. As for the as-milled Mg2Mn, powder diffraction analysis showed the formation of MgD2 as the main reaction product. A small fraction of a cubic K2PtCl6-type phase (a = 6.526 A) was also observed. This was identified as a Mg2FeD6-type compound. It was likely formed as a result of Fe impurities originating from the milling media and detected by EDX analysis. Infrared spectroscopy confirmed the presence of the [FeD6]4- complex (stretching band at 1259 cm(-1)) and showed an additional band at 1313 cm(-1). The likelihood of this band arising from Mn-D bonds is discussed. Finally, deuterium desorption upon heating, was investigated for all systems by differential scanning calorimetry.

Determination of the heat of hydride formation/decomposition by high-pressure differential scanning calorimetry (HP-DSC).

Among the thermodynamic properties of novel materials for solid-state hydrogen storage, the heat of formation/decomposition of hydrides is the most important parameter to evaluate the stability of the compound and its temperature and pressure of operation. In this work, the desorption and absorption behaviors of three different classes of hydrides are investigated under different hydrogen pressures using high-pressure differential scanning calorimetry (HP-DSC). The HP-DSC technique is used to estimate the equilibrium pressures as a function of temperature, from which the heat of formation is derived. The relevance of this procedure is demonstrated for (i) magnesium-based compounds (Ni-doped MgH2), (ii) Mg-Co-based ternary hydrides (Mg-CoHx) and (iii) Alanate complex hydrides (Ti-doped NaAlH4). From these results, it can be concluded that HP-DSC is a powerful tool to obtain a good approximation of the thermodynamic properties of hydride compounds by a simple and fast study of desorption and absorption properties under different pressures.