RESUMO
The low thermal conductivity of group IV-VI semiconductors is often attributed to the soft phonons and giant anharmonicity observed in these materials. However, there is still no broad consensus on the fundamental origin of this giant anharmonic effect. Utilizing first-principles calculations and group symmetry analysis, we find that the cation lone-pairs s electrons in IV-VI materials cause a significant coupling between occupied cation s orbitals and unoccupied cation p orbitals due to the symmetry reduction when atoms vibrate away from their equilibrium positions under heating. This leads to an electronic energy gain, consequently flattening the potential energy surface and causing soft phonons and strong anharmonic effects. Our findings provide an intrinsic understanding of the low thermal conductivity in IV-VI compounds by connecting the anharmonicity with the dynamical electronic structures, and can also be extended to a large family of hybrid systems with lone-pair electrons, for promising thermoelectric applications and predictive designs.
RESUMO
The conventional single-defect-mediated Shockley-Read-Hall model suggests that the nonradiative carrier recombination rate in wide-band gap (WBG) semiconductors would be negligible because the single-defect level is expected to be either far from valence-band-maximum (VBM) or conduction-band-minimum (CBM), or both. However, this model falls short of elucidating the substantial nonradiative recombination phenomena often observed experimentally across various WBG semiconductors. Owing to more localized nature of defect states inherent to WBG semiconductors, when the defect charge state changes, there is a pronounced structural relaxation around the local defect site. This suggests that a defect at each charge state may exhibit a few distinct local configurations, namely, a stable configuration and a few metastable/transit state configurations. Consequently, a dual-level nonradiative recombination model should more realistically exist in WBG semiconductors. In this model, through the dual-level mechanism, electron and hole trap levels are different from each other and could be closer to the CBM for the electron trap and closer to the VBM for the hole trap, respectively; therefore, this significantly increases the corresponding electron and hole capture rates, enhancing the overall process of nonradiative recombination, and explains the experimental observations. In this work, taking technically important SiO2 as an illustrative example, we introduce the dual-level mechanism to elucidate the mechanism of nonradiative carrier recombination in WBG semiconductors. Our findings demonstrated strong alignment with available experimental data, reinforcing the robustness of our proposed dual-level model. Our fundamental understanding, therefore, provides a clear physical picture of the issue and can also be applied to predict the defect-related nonradiative carrier recombination characteristics in other WBG materials.
RESUMO
Multiferroic materials have great potential in non-volatile devices for low-power and ultra-high density information storage, owing to their unique characteristic of coexisting ferroelectric and ferromagnetic orders. The effective manipulation of their intrinsic anisotropy makes it promising to control multiple degrees of the storage "medium". Here, we have discovered intriguing in-plane electrical and magnetic anisotropies in van der Waals (vdW) multiferroic CuCrP2S6. The uniaxial anisotropies of current rectifications, magnetic properties and magnon modes are demonstrated and manipulated by electric direction/polarity, temperature variation and magnetic field. More important, we have discovered the spin-flop transition corresponding to specific resonance modes, and determined the anisotropy parameters by consistent model fittings and theoretical calculations. Our work provides in-depth investigation and quantitative analysis of electrical and magnetic anisotropies with the same easy axis in vdW multiferroics, which will stimulate potential device applications of artificial bionic synapses, multi-terminal spintronic chips and magnetoelectric devices.
RESUMO
Polarization-sensitive photodetectors, with the ability of identifying the texture-, stress-, and roughness-induced light polarization state variation, displace unique advantages in the fields of national security, medical diagnosis, and aerospace. The utilization of in-plane anisotropic two-dimensional (2D) materials has led the polarization photodetector into a polarizer-free regime, and facilitated the miniaturization of optoelectronic device integration. However, the insufficient polarization ratio (usually less than 10) restricts the detection resolution of polarized signals. Here, we designed a sub-wavelength array (SWA) structure of 2D germanium selenium (GeSe) to further improve its anisotropic sensitivity, which boosts the polarized photocurrent ratio from 1.6 to 18. This enhancement comes from the combination of nano-scale arrays with atomic-scale lattice arrangement at the low-symmetric direction, while the polarization-sensitive photoresponse along the high-symmetric direction is strongly suppressed due to the SWA-caused depolarization effect. Our mechanism study revealed that the SWA can improve the asymmetry of charge distribution, attenuate the matrix element in zigzag direction, and the localized surface plasma, which elevates the photo absorption and photoelectric transition probability along the armchair direction, therefore accounts for the enhanced polarization sensitivity. In addition, the photodetector based on GeSe SWA exhibited a broad power range of 40 dB at a near-infrared wavelength of 808 nm and the ability of weak-light detection under 0.1 LUX of white light (two orders of magnitude smaller than pristine 2D GeSe). This work provides a feasible guideline to improve the polarization sensitivity of 2D materials, and will greatly benefit the development of polarized imaging sensors.
RESUMO
The metal-insulator transition (MIT) is normally assisted by certain external power input, such as temperature, pressure, strain, or doping. However, these may increase the disorder of the crystal or cause other effects, which makes device fabrication complicated and/or hinders large-scale application. Here, we adopt a new approach to obtain robust modulation of physical properties in magnetic semiconductor (Ga,Mn)As by surface molecular modification. We have probed both sides of the MIT with n- and p-type molecular doping. Density functional theory calculations are carried out to determine the stable absorption configuration and charge transfer mechanism of electron acceptor and donor molecules on the semiconductor surface. Both experimental and theoretical results confirm a remarkable modulation in carrier concentrations without introducing impurities or defects. This work points out the possibility of effectively tuning physical properties of solid-state materials by functional molecules, which is clean, flexible, nondestructive, and easily achieved.
RESUMO
The intentionally designed band alignment of heterostructures and doping engineering are keys to implement device structure design and device performance optimization. According to the theoretical prediction of several typical materials among the transition metal dichalcogenides (TMDs) and group-IV metal chalcogenides, MoS2 and SnSe2 present the largest staggered band offset. The large band offset is conducive to the separation of photogenerated carriers, thus MoS2 /SnSe2 is a theoretically ideal candidate for fabricating photodetector, which is also verified in the experiment. Furthermore, in order to extend the photoresponse spectrum to solar-blind ultraviolet (SBUV), doping engineering is adopted to form an additional electron state, which provides an extra carrier transition channel. In this work, pure MoS2 /SnSe2 and doped MoS2 /SnSe2 heterostructures are both fabricated. In terms of the photoelectric performance evaluation, the rejection ratio R254 /R532 of the photodetector based on doped MoS2 /SnSe2 is five orders of magnitude higher than that of pure MoS2 /SnSe2 , while the response time is obviously optimized by 3 orders. The results demonstrate that the combination of band alignment and doping engineering provides a new pathway for constructing SBUV photodetectors.
RESUMO
In halide perovskite solar cells the formation of secondary-phase excess lead iodide (PbI2) has some positive effects on power conversion efficiency (PCE) but can be detrimental to device stability and lead to large hysteresis effects in voltage sweeps. We converted PbI2 into an inactive (PbI2)2RbCl compound by RbCl doping, which effectively stabilizes the perovskite phase. We obtained a certified PCE of 25.6% for FAPbI3 (FA, formamidinium) perovskite solar cells on the basis of this strategy. Devices retained 96% of their original PCE values after 1000 hours of shelf storage and 80% after 500 hours of thermal stability testing at 85°C.
RESUMO
The band offsets between semiconductors are significantly associated with the optoelectronic characteristics and devices design. Here, we investigate the band offset trends of few-layer and bulk IV-VI semiconductors MX and MX2(M = Ge, Sn; X = S, Se, Te). For common-cation (anion) systems, as the atomic number increases, the valence band offset of MX decreases, while that of MX2has no distinct change, and the physical origin can be interpreted using band coupling mechanism and atomic potential trend. The band edges of GeX2system straddle redox potentials of water, making them competitive candidates for photocatalyst. Moreover, layer number modulation can induce the band offset of GeSe/SnS and GeSe2/GeS2heterojunction undergoing a transition from type I to type II, which makes them suitable for optoelectronic applications.
RESUMO
Quantum emitters are needed for a myriad of applications ranging from quantum sensing to quantum computing. Hexagonal boron nitride (hBN) quantum emitters are one of the most promising solid-state platforms to date due to their high brightness and stability and the possibility of a spin-photon interface. However, the understanding of the physical origins of the single-photon emitters (SPEs) is still limited. Here we report dense SPEs in hBN across the entire visible spectrum and present evidence that most of these SPEs can be well explained by donor-acceptor pairs (DAPs). On the basis of the DAP transition generation mechanism, we calculated their wavelength fingerprint, matching well with the experimentally observed photoluminescence spectrum. Our work serves as a step forward for the physical understanding of SPEs in hBN and their applications in quantum technologies.
RESUMO
2D materials have been attracting high interest in recent years due to their low structural symmetry, excellent photoresponse, and high air stability. However, most 2D materials can only respond to specific light, which limits the development of wide-spectrum photodetectors. Proper bandgap and the regulation of Fermi level are the foundations for realizing electronic multichannel transition, which is an effective method to achieve a wide spectral response. Herein, a noble 2D material, palladium phosphide sulfide (PdPS), is designed and synthesized. The bandgap of PdPS is around 2.1 eV and the formation of S vacancies, interstitial Pd and P atoms promote the Fermi level very close to the conduction band. Therefore, the PdPS-based photodetector shows impressive wide spectral response from solar-blind ultraviolet to near-infrared based on the multichannel transition. It also exhibits superior optoelectrical properties with photoresponsivity (R) of 1 × 103 A W-1 and detectivity (D*) of 4 × 1011 Jones at 532 nm. Moreover, PdPS exhibits good performance of polarization detection with dichroic ratio of ≈3.7 at 808 nm. Significantly, it achieves polarimetric imaging and hidden-target detection in complex environments through active detection.
RESUMO
Thermoelectric materials which enable heat-to-electricity conversion are fundamentally important for heat management in semiconductor devices. Achieving high thermoelectric performance requires blocking the thermal transport and maintaining the high electronic transport, but it is a challenge to satisfy both criteria simultaneously. We propose that tuning the interlayer distance can effectively modulate the electrical and thermal conductivities. We find group IV-VI and V semiconductors with a moderate interlayer distance can exhibit high thermoelectric performance. Taking SnSe as an example, we reveal that in the out-of-plane direction the delocalized pz orbitals combined with the relatively small interlayer distance lead to overlapping of the antibonding state wave functions, which is beneficial for high electronic transport. However, because of the breakdown of the chemical bond, the out-of-plane thermal conductivity is small. This study provides a strategy to enhance electrical conductivity without increasing thermal conductivity and thus sheds light on the design of thermoelectric devices.
RESUMO
Ultra-wide band-gap nitrides have huge potential in micro- and optoelectronics due to their tunable wide band-gap, high breakdown field and energy density, excellent chemical and thermal stability. However, their application has been severely hindered by the low p-doping efficiency, which is ascribed to the ultrahigh acceptor activation energy originated from the low valance band maximum. Here, a valance band modulation mode is proposed and a quantum engineering doping method is conducted to achieve high-efficient p-type ultra-wide band-gap nitrides, in which GaN quantum-dots are buried in nitride matrix to produce a new band edge and thus to tune the dopant activation energy. By non-equilibrium doping techniques, quantum engineering doped AlGaN:Mg with Al content of 60% is successfully fabricated. The Mg activation energy has been reduced to about 21 meV, and the hole concentration reaches higher than 1018 cm-3 at room temperature. Also, similar activation energies are obtained in AlGaN with other Al contents such as 50% and 70%, indicating the universality of the quantum engineering doping method. Moreover, deep-ultraviolet light-emission diodes are fabricated and the improved performance further demonstrates the validity and merit of the method. With the quantum material growth techniques developing, this method would be prevalently available and tremendously stimulate the promotion of ultra-wide band-gap semiconductor-based devices.
RESUMO
2D layered photodetectors have been widely researched for intriguing optoelectronic properties but their application fields are limited by the bandgap. Extending the detection waveband can significantly enrich functionalities and applications of photodetectors. For example, after breaking through bandgap limitation, extrinsic Si photodetectors are used for short-wavelength infrared or even long-wavelength infrared detection. Utilizing extrinsic photoconduction to extend the detection waveband of 2D layered photodetectors is attractive and desirable. However, extrinsic photoconduction has yet not been observed in 2D layered materials. Here, extrinsic photoconduction-induced short-wavelength infrared photodetectors based on Ge-based chalcogenides are reported for the first time and the effectiveness of intrinsic point defects are demonstrated. The detection waveband of room-temperature extrinsic GeSe photodetectors with the assistance of Ge vacancies is broadened to 1.6 µm. Extrinsic GeSe photodetectors have an excellent external quantum efficiency (0.5%) at the communication band of 1.31 µm and polarization-resolved capability to subwaveband radiation. Moreover, room-temperature extrinsic GeS photodetectors with a detection waveband to the communication band of 1.55 µm further verify the versatility of intrinsic point defects. This approach provides design strategies to enrich the functionalities of 2D layered photodetectors.
RESUMO
Structural symmetry is a simple way to quantify the anisotropic properties of materials toward unique device applications including anisotropic transportation and polarization-sensitive photodetection. The enhancement of anisotropy can be achieved by artificial symmetry-reduction design. A core-shell SbI3 /Sb2 O3 nanowire, a heterostructure bonded by van der Waals forces, is introduced as an example of enhancing the performance of polarization-sensitive photodetectors via symmetry reduction. The structural, vibrational, and optical anisotropies of such core-shell nanostructures are systematically investigated. It is found that the anisotropic absorbance of a core-shell nanowire is obviously higher than that of two single compounds from both theoretical and experimental investigations. Anisotropic photocurrents of the polarization-sensitive photodetectors based on these core-shell SbI3 /Sb2 O3 van der Waals nanowires are measured ranging from ultraviolet (UV) to visible light (360-532 nm). Compared with other van der Waals 1D materials, low anisotropy ratio (Imax /Imin ) is measured based on SbI3 but a device based on this core-shell nanowire possesses a relatively high anisotropy ratio of ≈3.14 under 450 nm polarized light. This work shows that the low-symmetrical core-shell van der Waals heterostructure has large potential to be applied in wide range polarization-sensitive photodetectors.
RESUMO
Transparent conductive materials (TCMs) has always been playing a significant role in electronic and photovoltaic area, due to its prominent optical and electronic properties. To render those transparent materials highly conductive, efficient n- and p- type doping is critically needed to obtain high concentration of free electron and hole carriers. Despite extensive research over the past five decades, high-quality p-type doping of wide-band-gap transparent materials remains a challenge. Here, we summarize four proposed design principles to enhance the p-type conductivity of these wide band gap materials, including (i) reducing the formation energy of the acceptors to enhance the dopant concentration; (ii) lowering the ionization energy and, hence, increasing the ionization of the acceptors to increase the concentration of the free holes; (iii) increasing the VBM of the host material to approaching the pinned Fermi level; and (iv) suppressing the compensating donors to shifting the pinning Fermi level toward the VBM. For each mechanism, we discuss in detail its underlying physics and provided some examples to illustrate the design principles. From this review, one could learn the doping principles and have a strategic mind when designing other p-type materials.
RESUMO
The cohesive energy, phonon spectrum and quantum molecular-dynamic simulation have been used successively to determine whether the crystalline two-dimensional (2D) metal-benzenehexathiolate (M-BHT) coordination compounds are stable or not. The electronic structures of stable M-BHTs and the corresponding inorganic semiconducting materials have been compared. From the point of view of satisfying stoichiometric ratios and saturation of chemical bonds, we designed possible planar molecular structures and demonstrated that there may be two different 2D M-BHTs, i.e. group II-[Formula: see text] and group IV-[Formula: see text]. However, the cohesive energy calculation indicates that the group IV-[Formula: see text] coordination compound cannot be obtained by thermodynamic equilibrium growth. In contrast, [Formula: see text] and [Formula: see text] from the group II-[Formula: see text] have not only thermodynamic stability, but also dynamic stability due to their phonon spectrum with no imaginary frequency. Moreover, they are still the two most stable ones when the bridge atom S of ligand BHT is replaced by the other chalcogens of O, Se and Te. Further studies indicated that [Formula: see text] and [Formula: see text] both have room temperature dynamic stability and exhibit semiconducting. The exceptional stability and relatively narrow band gap make them advantageous over their inorganic counterparts. Our findings open opportunities to search for new 2D planar conducting coordination compound for organic electronic applications.
RESUMO
Magnetic tunneling junctions (MTJs) have atomic thickness due to the use of two-dimensional (2D) materials. Combining density functional theory with non-equilibrium Green's function formalism, we systematically investigate the structural and magnetic properties of CrX3/h-BN/CrX3 (X = Br, I) MTJs, as well as their spin-dependent transport characteristics. Through calculation of the transmission spectrum, the large tunneling magnetoresistance (TMR) effect was observed in these MTJs. Moreover, their conductance based on two-dimensional materials was greatly improved over that of traditional MTJs. The transmission mechanism was analyzed using the symmetry of the orbit and the eigenstates of the transmitted electrons. We also discuss the problem of Schottky contact between different metal electrodes and devices. Our results suggest that MTJs based on two-dimensional ferromagnets are feasible.
RESUMO
Oxymatrine (OMT) is a strong immunosuppressive agent that has been used in the clinic for many years. In the present study, by using plaque inhibition, luciferase reporter plasmids, qRT-PCR, western blotting, and ELISA assays, we have investigated the effect and mechanism of OMT on influenza A virus (IAV) replication and IAV-induced inflammation in vitro and in vivo. The results showed that OMT had excellent anti-IAV activity on eight IAV strains in vitro. OMT could significantly decrease the promoter activity of TLR3, TLR4, TLR7, MyD88, and TRAF6 genes, inhibit IAV-induced activations of Akt, ERK1/2, p38 MAPK, and NF-κB pathways, and suppress the expressions of inflammatory cytokines and MMP-2/-9. Activators of TLR4, p38 MAPK and NF-κB pathways could significantly antagonize the anti-IAV activity of OMT in vitro, including IAV replication and IAV-induced cytopathogenic effect (CPE). Furthermore, OMT could reduce the loss of body weight, significantly increase the survival rate of IAV-infected mice, decrease the lung index, pulmonary inflammation and lung viral titter, and improve pulmonary histopathological changes. In conclusion, OMT possesses anti-IAV and anti-inflammatory activities, the mechanism of action may be linked to its ability to inhibit IAV-induced activations of TLR4, p38 MAPK, and NF-κB pathways.
Assuntos
Alcaloides/farmacologia , Vírus da Influenza A/efeitos dos fármacos , NF-kappa B/metabolismo , Quinolizinas/farmacologia , Receptor 4 Toll-Like/metabolismo , Proteínas Quinases p38 Ativadas por Mitógeno/metabolismo , Células A549 , Animais , Antivirais/farmacologia , Linhagem Celular , Replicação do DNA/efeitos dos fármacos , Cães , HumanosRESUMO
Photodetectors with high polarization sensitivity are in great demand in advanced optical communication. Here, we demonstrate that photodetectors based on titanium trisulfide (TiS3) are extremely sensitive to polarized light (from visible to the infrared), due to its reduced in-plane structural symmetry. By density functional theory calculation, TiS3 has a direct bandgap of 1.13 eV. The highest photoresponsivity reaches 2500 A W-1. What is more, in-plane optical selection caused by strong anisotropy leads to the photoresponsivity ratio for different directions of polarization that can reach 4:1. The angle-dependent photocurrents of TiS3 clearly display strong linear dichroism. Moreover, the Raman peak at 370 cm-1 is also very sensitive to the polarization direction. The theoretical optical absorption of TiS3 is calculated by using the HSE06 hybrid functional method, in qualitative agreement with the observed experimental photoresponsivity.