Development of Single-Segment Substitution Lines and Fine-Mapping of qSPP4 for Spikelets Per Panicle and qGW9 for Grain Width Based on Rice Dual-Segment Substitution Line Z783.

Single segment substitution line (SSSL) libraries are an ideal platform for breeding by design. To develop SSSLs-Xihui18 covering the whole genome, a novel rice chromosome segment substitution line (CSSL), Z783, carrying two substitution segments (average length of 6.55 Mb) on Chr.4 and Chr.9 was identified, which was a gap in the library previously. Z783 was developed from the progeny of recipient "Xihui18" (an indica restorer line) and donor "Huhan3" (a japonica cultivar) by advanced backcross combined molecular marker-assisted selection (MAS). It displayed multiple panicles and less spikelets and wide grains. Then, a F2 population derived from Xihui18/Z783 was used to map quantitative trait loci (QTLs) for yield-related traits by the mixed linear model method. Nine QTLs were detected (p < 0.05). Furthermore, three SSSLs were constructed by MAS, and all 9 QTLs could be validated, and 15 novel QTLs could be detected by these SSSLs by a one-way ANOVA analysis. The genetic analysis showed that qSSP4 for less spikelets and qGW9 for wide grain all displayed dominant gene action in their SSSLs. Finally, qSSP4 and qGW9 were fine-mapped to intervals of 2.75 Mb and 1.84 Mb, on Chromosomes 4 and 9, respectively. The results lay a solid foundation for their map cloning and molecular breeding by design.

Genetic Effects Analysis of QTLs for Rice Grain Size Based on CSSL-Z403 and Its Dissected Single and Dual-Segment Substitution Lines.

Rice chromosomal segment substitution lines (CSSLs) are ideal materials for studying quantitative traits such as grain size. Here, a rice large-grain CSSL-Z403 was identified among progeny of the recipient Xihui18 and the donor Jinhui35 based on molecular marker-assisted selection. Z403 carried 10 substitution segments with average length of 3.01 Mb. Then, a secondary F2 population derived from a cross between Xihui18 and Z403 was used to map quantitative trait loci (QTL) for grain size. Six QTLs distributed on chromosomes 5, 6, 7, 9 and 12 were detected. Finally four single-segment substitution lines (SSSLs) and two dual-segment substitution lines (DSSLs) carrying these target QTLs were constructed, and 10 novel QTLs were identified by four SSSLs. The large grain of Z403 was controlled at least by qGWT5, qGWT7, qGWT9 and qGWT12, and its grain weight was influenced through grain length QTL such as qGL5, qGL6, qGL9 and qGL12, as well as grain width QTL such as qGW5, qGW7, qGW9 and qGW12. Among 16 QTLs, four QTLs including qGL6, etc., might be novel compared with the reported documents. Again, positive or less negative epistatic effects between two non-allelic QTLs (additive effect > 0) may assist screening the genotype with larger grain size in further selection.

QTL Analysis of Z414, a Chromosome Segment Substitution Line with Short, Wide Grains, and Substitution Mapping of qGL11 in Rice.

Most agronomic traits of rice (Oryza sativa), such as grain length, are complex traits controlled by multiple genes. Chromosome segment substitution lines (CSSLs) are ideal materials for dissecting these complex traits. We developed the novel rice CSSL 'Z414', which has short, wide grains, from progeny of the recipient parent 'Xihui 18' (an indica restorer line) and the donor parent 'Huhan 3' (a japonica cultivar). Z414 contains four substitution segments with an average length of 3.04 Mb. Z414 displays seven traits that significantly differ from those of Xihui 18, including differences in grain length, width, and weight; degree of chalkiness; and brown rice rate. We identified seven quantitative trait loci (QTL) that are responsible for these differences in an F2 population from a cross between Xihui 18 and Z414. Among these, six QTL (qPL3, qGW5, qGL11, qRLW5, qRLW11, and qGWT5) were detected in newly developed single-segment substitution lines (SSSLs) S1-S6. In addition, four QTL (qGL3, qGL5, qCD3, and qCD5) were detected in S1 and S5. Analysis of these SSSLs attributed the short, wide grain trait of Z414 to qGL11, qGL3, qGL5, and qGW5. Substitution mapping delimited qGL11 within an 810-kb interval on chromosome 11. Sequencing, real time quantitative PCR, and cell morphology analysis revealed that qGL11 might be a novel QTL encoding the cyclin CycT1;3. Finally, pyramiding qGL3 (a = 0.43) and qGL11 (a = - 0.37) led to shorter grains in the dual-segment substitution line D2 and revealed that qGL11 is epistatic to qGL3. In addition, S1 and D2 exhibited different grain sizes and less chalkiness than Z414. In conclusion, the short grain phenotype of the CSSL Z414 is controlled by qGL11, qGL3, and qGL5. qGL11 might be a novel QTL encoding CycT1;3, whose specific role in regulating grain length was previously unknown, and qGL11 is epistatic to qGL3. S1 and D2 could potentially be used in hybrid rice breeding.

First Indirect Drive Experiment Using a Six-Cylinder-Port Hohlraum.

The new hohlraum experimental platform and the quasi-3D simulation model are developed to enable the study of the indirect drive experiment using the six-cylinder-port hohlraum for the first time. It is also the first implosion experiment for the six laser-entrance-hole hohlraum to effectively use all the laser beams of the laser facility that is primarily designed for the cylindrical hohlraum. The experiments performed at the 100 kJ Laser Facility produce a peak hohlraum radiation temperature of ∼222 eV for ∼80 kJ and 2 ns square laser pulse. The inferred x-ray conversion efficiency η∼87% is similar to the cylindrical hohlraum and higher than the octahedral spherical hohlraum at the same laser facility, while the low laser backscatter is similar to the outer cone of the cylindrical hohlraum. The hohlraum radiation temperature and M-band (>1.6 keV) flux can be well reproduced by the quasi-3D simulation. The variations of the yield-over-clean and the hot spot shape can also be semiquantitatively explained by the calculated major radiation asymmetry of the quasi-3D simulation. Our work demonstrates the capability for the study of the indirect drive with the six-cylinder-port hohlraum at the cylindrically configured laser facility, which is essential for numerically assessing the laser energy required by the ignition-scale six-cylinder-port hohlraum.

First Inertial Confinement Fusion Implosion Experiment in Octahedral Spherical Hohlraum.

In inertial confinement approaches to fusion, the asymmetry of target implosion is a major obstacle to achieving high gain in the laboratory. A recently proposed octahedral spherical hohlraum makes it possible to naturally create spherical target irradiation without supplementary symmetry control. Before any decision is made to pursue an ignition-scale laser system based on the octahedral hohlraum, one needs to test the concept with the existing facilities. Here, we report a proof-of-concept experiment for the novel octahedral hohlraum geometry on the cylindrically configured SGIII laser facility without a symmetry control. All polar and equatorial self-emission images of the compressed target show a near round shape of convergence ratio 15 under both square and shaped laser pulses. The observed implosion performances agree well with the ideal spherical implosion simulation. It also shows limitations with using the existing facilities and adds further weight to the need to move to a spherical port geometry for future ignition laser facilities.

Numerical study and improvement of the dynamic performance of dilation x-ray imager.

We present in this Note a numerical study on the dynamic performance of a Dilation X-ray Imager (DIXI). The DIXI including a photoelectron tube (PT) and a magnetic solenoid is modeled in 3D space. The initial parameters of the photoelectrons are sampled with a Monte Carlo code. The trajectories of the photoelectrons are calculated by using the particle-in-cell method, and the transit time spread (TTS) and temporal magnification are analyzed in detail. We have designed a PT with a double-microstrip structure and compared the performance of the double-microstrip PT with the traditional single-microstrip PT. The results show that the sensitivity of the TTS and the temporal magnification to the emission time of the photoelectrons can be significantly reduced by using the double-microstrip PT, resulting in an improvement of the time window. Therefore, the dynamic performance of the DIXI is improved.

Theoretical study on temporal and spatial performance of magnetic solenoid used in dilation x-ray imager.

In the Dilation X-ray Imager (DIXI), which is characterized by an ultra-short gating time, a magnetic solenoid is used to keep the photoelectrons from defocusing during the drift process. The performance of the magnetic solenoid has an important influence on the performance of the DIXI. We present in this paper the efforts on studying the spatial and temporal performance of the magnetic solenoid used in the DIXI by tracking the photoelectrons with the particle-in-cell method. The initial parameters of the photoelectrons of the Au cathode were sampled with a Monte Carlo code. A novel magnetic solenoid with a shielding shell made of soft iron was proposed. We compared the performance of this solenoid with a normal solenoid. The simulation results of magnetic field distribution, spatial resolution, transit time spread, and temporal distortion were presented in detail to demonstrate that the performance of the DIXI can be significantly improved by using the magnetic solenoid with the proposed iron shell.

Development of a gated X-ray imager with multiple views and spectral selectivity for observing plasma evolution in hohlraums.

In the study of indirect drive Inertial Confinement Fusion (ICF), X-ray images through the laser entrance hole of the hohlraums can provide key information. In this paper, we present the advances on the development of a gated X-ray imager with multiple views and spectral selectivity. A diagnostic snout which contains four X-ray planar mirrors has been designed and coupled to a gated X-ray detector which includes an air box and has a spatial resolution better than 35 µm and a temporal resolution better than 70 ps. The two inner mirrors in the diagnostic snout operate at M band (1.6-3.5 keV), while the two outer mirrors operate at N band (0.5-1 keV). The four mirrors define four observation angles. Each mirror can reflect 4 X-ray images to the four microstrips of the gated X-ray detector with almost the same observation angle. The imager enables us to observe the spatial and temporal evolution of plasma in the hohlraums from four different observation angles based on both N band and M band images. The imager has been used in the ICF experiments conducted at Shenguang laser facility in China, and the obtained X-ray images of Au cylindrical hohlraum are presented and discussed in this paper.

First Octahedral Spherical Hohlraum Energetics Experiment at the SGIII Laser Facility.

The first octahedral spherical hohlraum energetics experiment is accomplished at the SGIII laser facility. For the first time, the 32 laser beams are injected into the octahedral spherical hohlraum through six laser entrance holes. Two techniques are used to diagnose the radiation field of the octahedral spherical hohlraum in order to obtain comprehensive experimental data. The radiation flux streaming out of laser entrance holes is measured by six flat-response x-ray detectors (FXRDs) and four M-band x-ray detectors, which are placed at different locations of the SGIII target chamber. The radiation temperature is derived from the measured flux of FXRD by using the blackbody assumption. The peak radiation temperature inside hohlraum is determined by the shock wave technique. The experimental results show that the octahedral spherical hohlraum radiation temperature is in the range of 170-182 eV with drive laser energies of 71 kJ to 84 kJ. The radiation temperature inside the hohlraum determined by the shock wave technique is about 175 eV at 71 kJ. For the flat-top laser pulse of 3 ns, the conversion efficiency of gas-filled octahedral spherical hohlraum from laser into soft x rays is about 80% according to the two-dimensional numerical simulation.

Experimental demonstration of low laser-plasma instabilities in gas-filled spherical hohlraums at laser injection angle designed for ignition target.

Octahedral spherical hohlraums with a single laser ring at an injection angle of 55^{∘} are attractive concepts for laser indirect drive due to the potential for achieving the x-ray drive symmetry required for high convergence implosions. Laser-plasma instabilities, however, are a concern given the long laser propagation path in such hohlraums. Significant stimulated Raman scattering has been observed in cylindrical hohlraums with similar laser propagation paths during the ignition campaign on the National Ignition Facility (NIF). In this Rapid Communication, experiments demonstrating low levels of laser-driven plasma instability (LPI) in spherical hohlraums with a laser injection angle of 55^{∘} are reported and compared to that observed with cylindrical hohlraums with injection angles of 28.5^{∘} and 55^{∘}, similar to that of the NIF. Significant LPI is observed with the laser injection of 28.5^{∘} in the cylindrical hohlraum where the propagation path is similar to the 55^{∘} injection angle for the spherical hohlraum. The experiments are performed on the SGIII laser facility with a total 0.35-µm incident energy of 93 kJ in a 3 nsec pulse. These experiments demonstrate the role of hohlraum geometry in LPI and demonstrate the need for systematic experiments for choosing the optimal configuration for ignition studies with indirect drive inertial confinement fusion.

Three-dimensional particle-in-cell simulation on gain saturation effect of microchannel plate.

We present here the results of the simulation work, using the three-dimensional particle-in-cell method, on the performance of the lead glass microchannel plate under saturated state. We calculated the electron cascade process with different DC bias voltages under both self-consistent condition and non-self-consistent condition. The comparative results have demonstrated that the strong self-consistent field can suppress the cascade process and make the microchannel plate saturated. The simulation results were also compared to the experimental data and good agreement was obtained. The simulation results also show that the electron multiplication process in the channel is accompanied by the buildup process of positive charges in the channel wall. Though the interactions among the secondary electron cloud in the channel, the positive charges in the channel wall, and the external acceleration field can make the electron-surface collision more frequent, the collision energy will be inevitably reduced, thus the electron gain will also be reduced.

New two-dimensional space-resolving flux detection technique for measurement of hohlraum inner radiation in Shenguang-III prototype.

The space-resolving measurement of X-ray flux from a specific area (laser spot, re-emitting wall, or capsule) inside the hohlraum is an ongoing and critical problem in indirectly driven inertial-confinement fusion experiments. In this work, we developed a new two-dimensional space-resolving flux detection technique to measure the X-ray flux from specific areas inside the hohlraum by using the time- and space-resolving flux detector (SRFD). In two typical hohlraum experiments conducted at the Shenguang-III prototype laser facility, the X-ray flux and radiation temperature from an area 0.2 mm in diameter inside the hohlraum were measured through the laser entrance hole (LEH). The different flux intensities and radiation temperatures detected using the SRFD from the inner area of the LEH were compared with the result measured using the flat-response X-ray detector from the entire LEH. This comparison was also analyzed theoretically. The inner area detected using the SRFD was found to be the re-emitting wall area alone. This important improvement in space-resolving X-ray flux measurement will enhance the current X-ray flux space characterization techniques, thereby furthering the quantitative understanding of X-ray flux space behavior in the hohlraum.

Direct measurement of x-ray flux for a pre-specified highly-resolved region in hohlraum.

A space-resolving flux detector (SRFD) is developed to measure the X-ray flux emitted from a specified region in hohlraum with a high resolution up to 0.11mm for the first time. This novel detector has been used successfully to measure the distinct X-ray fluxes emitted from hot laser spot and cooler re-emitting region simultaneously, in the hohlraum experiments on SGIII prototype laser facility. According to our experiments, the ratio of laser spot flux to re-emitted flux shows a strong time-dependent behavior, and the area-weighted flux post-processed from the measured laser spot flux and re-emitting wall flux agrees with that measured from Laser Entrance Hole by using flat-response X-ray detector (F-XRD). The experimental observations is reestablished by our two-dimensional hydrodynamic simulations and is well understood with the power balance relationship.