Interface Properties of MoS2 van der Waals Heterojunctions with GaN.

The combination of the unique physical properties of molybdenum disulfide (MoS2) with those of gallium nitride (GaN) and related group-III nitride semiconductors have recently attracted increasing scientific interest for the realization of innovative electronic and optoelectronic devices. A deep understanding of MoS2/GaN interface properties represents the key to properly tailor the electronic and optical behavior of devices based on this heterostructure. In this study, monolayer (1L) MoS2 was grown on GaN-on-sapphire substrates by chemical vapor deposition (CVD) at 700 °C. The structural, chemical, vibrational, and light emission properties of the MoS2/GaN heterostructure were investigated in detail by the combination of microscopic/spectroscopic techniques and ab initio calculations. XPS analyses on as-grown samples showed the formation of stoichiometric MoS2. According to micro-Raman spectroscopy, monolayer MoS2 domains on GaN exhibit an average n-type doping of (0.11 ± 0.12) × 1013 cm-2 and a small tensile strain (ε ≈ 0.25%), whereas an intense light emission at 1.87 eV was revealed by PL analyses. Furthermore, a gap at the interface was shown by cross-sectional TEM analysis, confirming the van der Waals (vdW) bond between MoS2 and GaN. Finally, density functional theory (DFT) calculations of the heterostructure were carried out, considering three different configurations of the interface, i.e., (i) an ideal Ga-terminated GaN surface, (ii) the passivation of Ga surface by a monolayer of oxygen (O), and (iii) the presence of an ultrathin Ga2O3 layer. This latter model predicts the formation of a vdW interface and a strong n-type doping of MoS2, in closer agreement with the experimental observations.

X-ray Investigation of CsPbI3:EuCl3 Infiltrated into Gig-Lox TiO2 Spongy Layers for Perovskite Solar Cells Applications.

In this study, we explore the potential of a blended material comprising CsPbI3:EuCl3 perovskite and Gig-Lox TiO2, a unique transparent spongy material known for its multi-branched porous structure, for application in solar cells. The inclusion of EuCl3 in CsPbI3 serves to stabilize the photoactive γ-phase with a bandgap of 1.75 eV, making it suitable for solar energy conversion in tandem solar cells. Our study applies X-ray-based techniques to investigate the structural properties and interfacial behavior within this blended material, in comparison with a reference perovskite layer deposited on glass. In addition, Spectroscopic ellipsometry is complemented with density functional theory calculations and photoluminescence measurements to elucidate the absorption and radiative emission properties of the blend. Notably, our findings reveal a significant quenching of photoluminescence within the blended material, underscoring the pivotal role of the distributed interfaces in facilitating efficient carrier injection from the CsPbI3:EuCl3 perovskite into the Gig-Lox TiO2 sponge. These findings pave the way for the application of the blend as an Electron Transport Layer (ETL) in semi-transparent perovskite solar cells for tandem and building integrated photovoltaics.

Atomistic Insights into Ultrafast SiGe Nanoprocessing.

Controlling ultrafast material transformations with atomic precision is essential for future nanotechnology. Pulsed laser annealing (LA), inducing extremely rapid and localized phase transitions, is a powerful way to achieve this but requires careful optimization together with the appropriate system design. We present a multiscale LA computational framework that can simulate atom-by-atom the highly out-of-equilibrium kinetics of a material as it interacts with the laser, including effects of structural disorder. By seamlessly coupling a macroscale continuum solver to a nanoscale superlattice kinetic Monte Carlo code, this method overcomes the limits of state-of-the-art continuum-based tools. We exploit it to investigate nontrivial changes in composition, morphology, and quality of laser-annealed SiGe alloys. Validations against experiments and phase-field simulations as well as advanced applications to strained, defected, nanostructured, and confined SiGe are presented, highlighting the importance of a multiscale atomistic-continuum approach. Current applicability and potential generalization routes are finally discussed.

Lead Detection in a Gig-Lox TiO2 Sponge by X-ray Reflectivity.

The importance of lead analysis in environmental matrices becomes increasingly relevant due to the anthropogenic spread of toxic species in nature. Alongside the existing analytical methods to detect lead in a liquid environment, we propose a new dry approach for lead detection and measurement based on its capture from a liquid solution by a solid sponge and subsequent quantification based on X-ray analyses. The detection method exploits the relationship between the electronic density of the solid sponge, which depends on the captured lead, and the critical angle for total reflection of the X-rays. For this purpose, gig-lox TiO2 layers, grown by modified sputtering physical deposition, were implemented for their branched multi-porosity spongy structure that is ideal for capturing lead atoms or other metallic ionic species in a liquid environment. The gig-lox TiO2 layers grown on glass substrates were soaked into aqueous solutions containing different concentrations of Pb, dried after soaking, and finally probed through X-ray reflectivity analyses. It has been found that lead atoms are chemisorbed onto the many available surfaces within the gig-lox TiO2 sponge by establishing stable oxygen bonding. The infiltration of lead into the structure causes an increase in the overall electronic density of the layer and, thus, an increment of its critical angle. Based on the established linear relationship between the amount of lead adsorbed and the augmented critical angle, a standardized quantitative procedure to detect Pb is proposed. The method can be, in principle, applied to other capturing spongy oxides and toxic species.

Perovskite solar cells from the viewpoint of innovation and sustainability.

Innovation is essential around the themes of climate change and sustainability. Commercial photovoltaics (PV) have noticeably contributed to getting to 22.1% share of the gross final energy consumption in Europe from renewable sources in 2020 but a steep further increase is urgent in the near future. Over the last few years, great success has been achieved by perovskites applied to PV, with mixed anions and cations in shared lattices that reached record efficiency values close to those of Si in laboratory-scale solar cells (∼26%). Their use has recently shed light on a medium/long-term compositional instability that arises from the partial miscibility of the species with similar role in the atomic lattice. The chemical route to prepare the materials for Perovskite Solar Cells (PSCs) also needs to be critically reviewed. Material waste and reuse are other concerns to be faced. This perspective paper indeed tackles some aspects for innovation and sustainability on the PSC field for production purposes. Some hints for technologically affordable processes based on in-vacuum deposition of Perovskites are provided in light of their sustainability and for the need to reduce production/maintenance costs. It is also discussed how to make in-vacuum production further competitive by boosting the material quality. Innovation is also projected into the theme of making sustainable choices for device architectures and materials. Carbon-based PSCs are highly focused since they allow avoiding the use of complex, unstable and costly HTLs. From the material side, pros and cons of using fully inorganic CsPbI3 are commented, framed by the current revival of single-cation perovskites. CsPbI3, in particolar, enables recycling and reuse initiatives thanks to the overall mass preservation under degradation. Some closing remarks are provided on the safe use of Pb as its effective sequestration before release from the PSC into the environment is properly engineered. We lastly trust that initiatives bringing together academic and industrial know-how in complementary fields able to take up responsible innovation will contribute to accelerating the ecological transition and will enable the societal transformation to fulfil the 2050 EU agenda for a sustainable future.

New Approaches and Understandings in the Growth of Cubic Silicon Carbide.

In this review paper, several new approaches about the 3C-SiC growth are been presented. In fact, despite the long research activity on 3C-SiC, no devices with good electrical characteristics have been obtained due to the high defect density and high level of stress. To overcome these problems, two different approaches have been used in the last years. From one side, several compliance substrates have been used to try to reduce both the defects and stress, while from another side, the first bulk growth has been performed to try to improve the quality of this material with respect to the heteroepitaxial one. From all these studies, a new understanding of the material defects has been obtained, as well as regarding all the interactions between defects and several growth parameters. This new knowledge will be the basis to solve the main issue of the 3C-SiC growth and reach the goal to obtain a material with low defects and low stress that would allow for realizing devices with extremely interesting characteristics.

Simulations of the Ultra-Fast Kinetics in Ni-Si-C Ternary Systems under Laser Irradiation.

We present a method for the simulation of the kinetic evolution in the sub µs timescale for composite materials containing regions occupied by alloys, compounds, and mixtures belonging to the Ni-Si-C ternary system. Pulsed laser irradiation (pulses of the order of 100 ns) promotes this evolution. The simulation approach is formulated in the framework of the phase-field theory and it consists of a system of coupled non-linear partial differential equations (PDEs), which considers as variables the following fields: the laser electro-magnetic field, the temperature, the phase-field and the material (Ni, Si, C, C clusters and Ni-silicides) densities. The model integrates a large set of materials and reaction parameters which could also self-consistently depend on the model variables. A parameter calibration is also proposed, specifically suited for the wavelength of a widely used class of excimer lasers (λ = 308 nm). The model is implemented on a proprietary laser annealing technology computer-aided design (TCAD) tool based on the finite element method (FEM). This integration allows, in principle, numerical solutions in systems of any dimension. Here we discuss the complex simulation trend in the one-dimensional case, considering as a starting state, thin films on 4H-SiC substrates, i.e., a configuration reproducing a technologically relevant case study. Simulations as a function of the laser energy density show an articulated scenario, also induced by the variables' dependency of the materials' parameters, for the non-melting, partial-melting and full-melting process conditions. The simulation results are validated by post-process experimental analyses of the microstructure and composition of the irradiated samples.

Exploring the Structural Competition between the Black and the Yellow Phase of CsPbI3.

The realization of stable inorganic perovskites is crucial to enable low-cost solution-processed photovoltaics. However, the main candidate material, CsPbI3, suffers from a spontaneous phase transition at room temperature towards a photo-inactive orthorhombic δ-phase (yellow phase). Here we used theoretical and experimental methods to study the structural and electronic features that determine the stability of the CsPbI3 perovskite. We argued that the two physical characteristics that favor the black perovskite phase at low temperatures are the strong spatial confinement in nanocrystalline structures and the level of electron doping in the material. Within this context, we discussed practical procedures for the realization of long-lasting inorganic lead halide perovskites.

Full Efficiency Recovery in Hole-Transporting Layer-Free Perovskite Solar Cells With Free-Standing Dry-Carbon Top-Contacts.

Carbon-based top electrodes for hole-transporting-layer-free perovskite solar cells (PSCs) were made by hot press (HP) transfer of a free-standing carbon-aluminum foil at 100°C and at a pressure of 0.1 MPa on a methylammonium lead iodide (MAPbI3) layer. Under these conditions, the perovskite surface was preserved from interaction with the solvent. Over a timescale of 90 days, HP-PSCs were systematically compared to reference cells with carbon-based top electrodes deposited by doctor blading (DB). We found that all the photovoltaic parameters recorded in HP-PSCs during time under ambient conditions settled on values systematically higher than those measured in the reference DB-PSCs, with efficiency stabilized at around 6% within the first few measurements. On the other hand, in DB-PSCs, a long-lasting (~14 days) degrading transient of the performances was observed, with a loss of efficiency from an initial ~8% to ~3%. Moreover, in HP-PSCs, a systematic day-by-day recovery of the efficiency after operation was observed (Δ~2%) by leaving the cell under open circuit, a nitrogen environment, and dark conditions. Noteworthily, a full recovery of all the parameters was observed at the end of the experiment, while DB-PSCs showed only a partial recovery under the same conditions. Hence, the complete release of solvent from the carbon contact, before an interface is established with the perovskite layer, offers a definite advantage through the long period of operation in preventing irreversible degradation. Our findings indeed highlight the crucial role of the interfaces and their feasible preservation under nitrogen atmosphere.

Temperature-Dependent Optical Band Gap in CsPbBr3, MAPbBr3, and FAPbBr3 Single Crystals.

Single crystals represent a benchmark for understanding the bulk properties of halide perovskites. We have indeed studied the dielectric function of lead bromide perovskite single crystals (MAPbBr3, CsPbBr3 and for the first time FAPbBr3) by spectroscopic ellipsometry in the range of 1-5 eV while varying the temperature from 183 to 440 K. An extremely low absorption coefficient in the sub-band gap region was found, indicating the high optical quality of all three crystals. We extracted the band gap values through critical point analysis showing that Tauc-based values are systematically underestimated. The two structural phase transitions, i.e., orthorhombic-tetragonal and tetragonal-cubic, show distinct optical behaviors, with the former having a discontinuous character. The cross-correlation of optical data with DFT calculations evidences the role of octahedral tilting in tailoring the value of the band gap at a given temperature, whereas differences in the thermal expansion affect the slope of the band gap trend as a function of temperature.

Local Order and Rotational Dynamics in Mixed A-Cation Lead Iodide Perovskites.

Halide perovskites containing a mixture of formamidinium (FA+), methylammonium (MA+) and cesium (Cs+) cations are the actual standard for obtaining record-efficiency perovskite solar cells. Although the compositional tuning that brings to optimal performance of the devices has been largely established, little is understood on the role of even small quantities of MA+ or Cs+ in stabilizing the black phase of FAPbI3 while boosting its photovoltaic yield. In this paper, we use Car-Parrinello molecular dynamics in large supercells containing different ratios of FA+ and either MA+ or Cs+, in order to study the structural and kinetic features of mixed perovskites at room temperature. Our analysis shows that cation mixing relaxes the rotational disorder of FA+ molecules by preferentially aligning their axis toward ⟨100⟩ cubic directions. The phenomenon stems from the introduction of additional local minima in the energetic landscape, which are absent in pure FAPbI3 crystals. As a result, a higher structural order is achieved, characterized by a pronounced octahedral tilting and a lower vibrational activity for the inorganic framework. We show that both MA+ and Cs+ are qualified for this enhancement, with Cs+ being particularly effective when diluted within the FAPbI3 perovskite.

Coupled molecular-dynamics and finite-element-method simulations for the kinetics of particles subjected to field-mediated forces.

A computational approach that couples molecular-dynamics (MD) and the-finite-element-method (FEM) technique is here proposed for the theoretical study of the dynamics of particles subjected to electromechanical forces. The system consists of spherical particles (modeled as micrometric rigid bodies with proper densities and dielectric functions) suspended in a colloidal solution, which flows in a microfluidic channel in the presence of a generic nonuniform variable electric field generated by electrodes. The particles are subjected to external forces (e.g., drag or gravity) which satisfy a particlelike formulation that is typical of the MD approach, along with an electromechanical force that, in turn, requires the three-dimensional self-consistent solutions of correct continuum field equations during the integration of the equations of motion. In the MD-FEM method used in this work, the finite element method is applied to solve the continuum field equations while the MD technique is used for the stepwise explicit integration of the equations of motion. Our work shows the potential of coupled MD-FEM simulations for the study of electromechanical particles and opens a double perspective for implementing (a) MD away from the field of atomistic simulations and (b) the continuum-particle approach to cases where the conventional force evaluation used in MD is not applicable.

Pb clustering and PbI2 nanofragmentation during methylammonium lead iodide perovskite degradation.

Studying defect formation and evolution in MethylAmmonium lead Iodide (MAPbI3) perovskite layers has a bottleneck in the softness of the matter and in its consequent sensitivity to external solicitations. Here we report that, in a polycrystalline MAPbI3 layer, Pb-related defects aggregate into nanoclusters preferentially at the triple grain boundaries as unveiled by Transmission Electron Microscopy (TEM) analyses at low total electron dose. Pb-clusters are killer against MAPbI3 integrity since they progressively feed up the hosting matrix. This progression is limited by the concomitant but slower transformation of the MAPbI3 core to fragmented and interconnected nano-grains of 6H-PbI2 that are structurally linked to the mother grain as in strain-relaxed heteroepitaxial coupling. The phenomenon occurs more frequently under TEM degradation whilst air degradation is more prone to leave uncorrelated [001]-oriented 2H-PbI2 grains as statistically found by X-Ray Diffraction. This path is kinetically costlier but thermodynamically favoured and is easily activated by catalytic species.

Anisotropic ultraviolet-plasmon dispersion in black phosphorus.

By means of momentum-resolved electron energy loss spectroscopy (EELS) coupled with scanning transmission electron microscopy, we have studied the dispersion relation of interband plasmonic modes in the ultraviolet in black phosphorus. We find that the dispersion of the interband plasmons is anisotropic. Experimental results are reproduced by density functional theory, by taking into account both the anisotropy of the single-particle response function, arising from the anisotropic band structure, and the damping. Moreover, our theoretical model also indicates the presence of low-energy excitations in the near-infrared that are selectively active in the armchair direction, whose existence has been experimentally validated by high-resolution EELS (HREELS) in reflection mode.

Electron trapping at SiO2/4H-SiC interface probed by transient capacitance measurements and atomic resolution chemical analysis.

Studying the electrical and structural properties of the interface of the gate oxide (SiO2) with silicon carbide (4H-SiC) is a fundamental topic, with important implications for understanding and optimising the performances of metal-oxide-semiconductor field effect transistor (MOSFETs). In this paper, near interface oxide traps (NIOTs) in lateral 4H-SiC MOSFETs were investigated combining transient gate capacitance measurements (C-t) and state of the art scanning transmission electron microscopy in electron energy loss spectroscopy (STEM-EELS) with sub-nm resolution. The C-t measurements as a function of temperature indicated that the effective NIOTs discharge time is temperature independent and electrons from NIOTs are emitted toward the semiconductor via-tunnelling. The NIOTs discharge time was modelled also taking into account the interface state density in a tunnelling relaxation model and it allowed us to locate traps within a tunnelling distance of up to 1.3 nm from the SiO2/4H-SiC interface. On the other hand, sub-nm resolution STEM-EELS revealed the presence of a non-abrupt (NA) SiO2/4H-SiC interface. The NA interface shows the re-arrangement of the carbon atoms in a sub-stoichiometric SiO x matrix. A mixed sp2/sp3 carbon hybridization in the NA interface region suggests that the interfacial carbon atoms have lost their tetrahedral SiC coordination.

Stability and Degradation in Hybrid Perovskites: Is the Glass Half-Empty or Half-Full?

Methylammonium lead iodide (CH3NH3PbI3) is an extensively used perovskite material with a remarkable potential for solar energy conversion. Despite its high photovoltaic efficiency, the material suffers from fast degradation when aging in atmospheric conditions and/or under sunlight. Here we review the principal degradation mechanisms of CH3NH3PbI3, focusing on the thermodynamic, environmental and polymorphic parameters that impact the stability of the material. A critical analysis of the available data indicates that degradation under ambient conditions is a defect-generation process that is highly localized on surfaces and interfaces, while it is further enhanced above the tetragonal-cubic transition at ∼54 °C. Within this context, we discuss the conservative role of N2 and propose strategies for the emergence of industrially viable hybrid photovoltaics.

Ambipolar MoS2 Transistors by Nanoscale Tailoring of Schottky Barrier Using Oxygen Plasma Functionalization.

One of the main challenges to exploit molybdenum disulfide (MoS2) potentialities for the next-generation complementary metal oxide semiconductor (CMOS) technology is the realization of p-type or ambipolar field-effect transistors (FETs). Hole transport in MoS2 FETs is typically hampered by the high Schottky barrier height (SBH) for holes at source/drain contacts, due to the Fermi level pinning close to the conduction band. In this work, we show that the SBH of multilayer MoS2 surface can be tailored at nanoscale using soft O2 plasma treatments. The morphological, chemical, and electrical modifications of MoS2 surface under different plasma conditions were investigated by several microscopic and spectroscopic characterization techniques, including X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), conductive AFM (CAFM), aberration-corrected scanning transmission electron microscopy (STEM), and electron energy loss spectroscopy (EELS). Nanoscale current-voltage mapping by CAFM showed that the SBH maps can be conveniently tuned starting from a narrow SBH distribution (from 0.2 to 0.3 eV) in the case of pristine MoS2 to a broader distribution (from 0.2 to 0.8 eV) after 600 s O2 plasma treatment, which allows both electron and hole injection. This lateral inhomogeneity in the electrical properties was associated with variations of the incorporated oxygen concentration in the MoS2 multilayer surface, as shown by STEM/EELS analyses and confirmed by ab initio density functional theory (DFT) calculations. Back-gated multilayer MoS2 FETs, fabricated by self-aligned deposition of source/drain contacts in the O2 plasma functionalized areas, exhibit ambipolar current transport with on/off current ratio Ion/Ioff ≈ 103 and field-effect mobilities of 11.5 and 7.2 cm2 V-1 s-1 for electrons and holes, respectively. The electrical behavior of these novel ambipolar devices is discussed in terms of the peculiar current injection mechanisms in the O2 plasma functionalized MoS2 surface.

Exploring the orthorhombic-tetragonal phase transition in CH3NH3PbI3: the role of atom kinetics.

Methylammonium lead tri-iodide is a polymorphic material with two temperature-induced phase transitions at 165 K and 327 K, accompanied by an orthorhombic-to-tetragonal and a tetragonal-to-cubic lattice modification. Understanding the origins of these transitions as well as their implications on the crystal structure of the material is fundamental for its technological optimization. Here, we use the density functional theory along with ab initio molecular dynamics to study the low-temperature phase transition of CH3NH3PbI3. Considering two kinetically robust models for the orthorhombic and the tetragonal phase, we show that the vibrational features of the material can be strongly affected by the orientations of the methylammonium ions. We argue that the orthorhombic-tetragonal transition is characterized by a partial rearrangement of the organic cations that locally relaxes the stress induced by the thermal movement of atoms. We finally propose a macroscopic model for the tetragonal phase that consists of rotated noncentrosymmetric domains, where the methylammonium ions are quasi-two-dimensionally confined around the a-b crystallographic plane.

Spontaneous bidirectional ordering of CH3NH3(+) in lead iodide perovskites at room temperature: The origins of the tetragonal phase.

CH3NH3PbI3 is a hybrid organic-inorganic material with a perovskite structure and a temperature-dependent polymorphism whose origins are still unclear. Here we perform ab initio molecular dynamics simulations in order to investigate the structural properties and atom dynamics of CH3NH3PbI3 at room temperature. Starting from different initial configurations, we find that a single-crystalline system undergoes a spontaneous ordering process which brings the CH3NH3(+) ions to alternately point towards the center of two out of the six faces of the cubic PbI3(-) framework, i.e. towards the 〈100〉 and 〈010〉 directions. This bidirectional ordering gives rise to a preferential distortion of the inorganic lattice on the a-b plane, shaping the observed tetragonal symmetry of the system. The process requires tens of picoseconds for CH3NH3PbI3 supercells with just eight CH3NH3(+) ions.

Stability of solution-processed MAPbI3 and FAPbI3 layers.

We provide a semi-empirical model based on in situ degradation measurements to predict the durability of hybrid perovskite materials under simulated thermal operation conditions. In the model, the degradation path of MAPbI3 layers is proved to follow an Arrhenius-type law. The predictive role is played by the activation energy combined with its pre-exponential factor. Our comparative study under moisture conditions with respect to vacuum and nitrogen treatments has assessed the occurrence of an intrinsic dynamic exchange of protons between the organic cations and the inorganic cage with a direct impact on the lattice stability, for which the presence of water molecules is not mandatory. This mutual interaction produces defects inside the material and volatile species, such as HI, CH3NH2 or MAI, with an associated experimental activation energy of 1.54 eV measured under vacuum conditions in dark. This value is comparable to that calculated by the density functional theory for defect generation in MAPbI3. In air, the action of water molecules reduces the activation energy for proton exchanges in dark to 0.96 eV. As an alternative solution to increase the material stability, we demonstrate that the substitution of methylammonium (MA(+)) with the formamidinium (FA(+)) cations inside the inorganic cage gives greater robustness to the overall lattice and extends the material durability due to a different interaction between the organic molecules and the inorganic cage. This definitely supports the use of FAPbI3 in applications, provided its structure can be stabilized in the dark phase at room temperature.