Speed and surface steepness affect internal tibial loading during running.

BACKGROUND: Internal tibial loading is influenced by modifiable factors with implications for the risk of stress injury. Runners encounter varied surface steepness (gradients) when running outdoors and may adapt their speed according to the gradient. This study aimed to quantify tibial bending moments and stress at the anterior and posterior peripheries when running at different speeds on surfaces of different gradients. METHODS: Twenty recreational runners ran on a treadmill at 3 different speeds (2.5 m/s, 3.0 m/s, and 3.5 m/s) and gradients (level: 0%; uphill: +5%, +10%, and +15%; downhill: -5%, -10%, and -15%). Force and marker data were collected synchronously throughout. Bending moments were estimated at the distal third centroid of the tibia about the medial-lateral axis by ensuring static equilibrium at each 1% of stance. Stress was derived from bending moments at the anterior and posterior peripheries by modeling the tibia as a hollow ellipse. Two-way repeated-measures analysis of variance were conducted using both functional and discrete statistical analyses. RESULTS: There were significant main effects for running speed and gradient on peak bending moments and peak anterior and posterior stress. Higher running speeds resulted in greater tibial loading. Running uphill at +10% and +15% resulted in greater tibial loading than level running. Running downhill at -10% and -15% resulted in reduced tibial loading compared to level running. There was no difference between +5% or -5% and level running. CONCLUSION: Running at faster speeds and uphill on gradients ≥+10% increased internal tibial loading, whereas slower running and downhill running on gradients ≥-10% reduced internal loading. Adapting running speed according to the gradient could be a protective mechanism, providing runners with a strategy to minimize the risk of tibial stress injuries.

Effect of gait types and external weight carrying strategies on the femoral neck strains during stair descent.

Gait and weight carrying method may change the femoral neck load during stair descent. Applying specific gait and weight carrying methods may reduce the femoral neck load during stair descent, which may reduce hip pain, hip pain related falls and fall related fractures for the older population. The purpose of this study was to test the effect of different gait types (step-over-step v.s. step-by-step) and external weight carrying strategies (ipsilateral v.s. contralateral side) on the femoral neck load, discover which method could reduce the femoral neck load effectively. Seventeen healthy adults from 50 to 70 yrs old were recruited. The kinematic and kinetic analysis, musculoskeletal modelling method were used to estimate the joint and muscle loads for the lower extremities. Finite element analysis was used with the femur model to calculate the femoral neck strains during stair descent with different gait types and weight carrying strategies. The compressive strains were reduced for step-by-step gait method than step-over-step (p<0.015, 12.3-17.4% decrease of strains), the tensile strains were significantly increased for the trailing leg of step-by-step than the leading leg (p<0.001, 24.7% increase of strains). Contralateral weight carrying increased compressive and tensile strains than ipsilateral (p<0.001, 9.9-24.5% increase of strains) in most conditions. Applying step-by-step method and avoiding contralateral side weight carrying could be effective to reduce femoral neck strains. These outcomes could be helpful for the older population to reduce the risks of hip pain, femoral neck pain or pain related falls and fractures.

Sensitivity of Internal Tibial Forces and Moments to Static Optimization Moment Constraints at the Subtalar and Ankle Joints.

We examined the sensitivity of internal tibial forces and moments during running to different subtalar/ankle moment constraints in a static optimization routine. Seventeen participants ran at 2.20, 3.33, and 4.17 ms-1 while force and motion data were collected. Ankle joint contact force was estimated using inverse-dynamics-based static optimization. Three sets of joint moment constraints were tested. All sets included the flexion-extension and abduction-adduction moments at the hip and the flexion-extension moment at the knee but differed in the constraints used at the subtalar/ankle: (1) flexion-extension at the ankle (Sag), (2) flexion-extension and inversion-eversion at ankle (Sag + Front), and (3) flexion-extension at the ankle and supination-pronation at the subtalar (Sag + SubT). Internal tibial forces and moments were quantified at the distal one-third of the tibia, by ensuring static equilibrium with applied forces and moments. No interaction was observed between running speed and constraint for internal tibial forces or moments. Sag + SubT resulted in larger internal mediolateral force (+41%), frontal (+79%), and transverse (+29%) plane moments, compared to Sag and Sag + Front. Internal axial force was greatest in Sag + Front, compared to Sag and Sag + SubT (+37%). Faster running speeds resulted in greater internal tibial forces and moments in all directions (≥+6%). Internal tibial forces and moments at the distal one-third of the tibia were sensitive to the subtalar and ankle joint moment constraints used in the static optimization routine, independent of running speed.

Internal Tibial Forces and Moments During Graded Running.

The stress experienced by the tibia has contributions from the forces and moments acting on the tibia. We sought to quantify the influence of running grade on internal tibial forces and moments. Seventeen participants ran at 3.33 m/s on an instrumented treadmill at 0 deg, ±5 deg, and ±10 deg while motion data were captured. Ankle joint contact force was estimated from an anthropometrically-scaled musculoskeletal model using inverse dynamics-based static optimization. Internal tibial forces and moments were quantified at the distal 1/3rd of the tibia, by ensuring static equilibrium with all applied forces and moments. Downhill running conditions resulted in lower peak internal axial force (range of mean differences: -9% to -16%, p < 0.001), lower peak internal anteroposterior force (-14% to -21%, p < 0.001), and lower peak internal mediolateral force (-14% to -15%, p < 0.001), compared to 0 deg and +5 deg. Furthermore, downhill conditions resulted in lower peak internal mediolateral moment (-11%to -21%, p < 0.001), lower peak internal anteroposterior moment (-13% to -14%, p < 0.001), and lower peak internal torsional moment (-9% to -21%, p < 0.001), compared to 0 deg, +5 deg, and +10 deg. The +10 deg condition resulted in lower peak internal axial force (-7% to -9%, p < 0.001) and lower peak internal mediolateral force (-9%, p = 0.004), compared to 0 deg and +5 deg. These findings suggest that downhill running may be associated with lower tibial stresses than either level or uphill running.

Peak and Per-Step Tibial Bone Stress During Walking and Running in Female and Male Recreational Runners.

BACKGROUND: Athletes, especially female athletes, experience high rates of tibial bone stress injuries (BSIs). Knowledge of tibial loads during walking and running is needed to understand injury mechanisms and design safe running progression programs. PURPOSE: To examine tibial loads as a function of gait speed in male and female runners. STUDY DESIGN: Controlled laboratory study. METHODS: Kinematic and kinetic data were collected on 40 recreational runners (20 female, 20 male) during 4 instrumented gait speed conditions on a treadmill (walk, preferred run, slow run, fast run). Musculoskeletal modeling, using participant-specific magnetic resonance imaging and motion data, was used to estimate tibial stress. Peak tibial stress and stress-time impulse were analyzed using 2-factor multivariate analyses of variance (speed*sex) and post hoc comparisons (α = .05). Bone geometry and tibial forces and moments were examined. RESULTS: Peak compression was influenced by speed (P < .001); increasing speed generally increased tibial compression in both sexes. Women displayed greater increases in peak tension (P = .001) and shear (P < .001) than men when transitioning from walking to running. Further, women displayed greater peak tibial stress overall (P < .001). Compressive and tensile stress-time impulse varied by speed (P < .001) and sex (P = .006); impulse was lower during running than walking and greater in women. A shear stress-time impulse interaction (P < .001) indicated that women displayed greater impulse relative to men when changing from a walk to a run. Compared with men, women displayed smaller tibiae (P < .001) and disproportionately lower tibial forces (P≤ .001-.035). CONCLUSION: Peak tibial stress increased with gait speed, with a 2-fold increase in running relative to walking. Women displayed greater tibial stress than men and greater increases in stress when shifting from walking to running. Sex differences appear to be the result of smaller bone geometry in women and tibial forces that were not proportionately lower, given the womens' smaller stature and lower mass relative to men. CLINICAL RELEVANCE: These results may inform interventions to regulate running-related training loads and highlight a need to increase bone strength in women. Lower relative bone strength in women may contribute to a sex bias in tibial BSIs, and female runners may benefit from a slower progression when initiating a running program.

Finite element analysis of femoral neck strains during stair ascent and descent.

For older population, a better understanding of the hip joint loading environment is needed for the prevention of hip pain, and the reduction of the stress fractures and fall risks. Using the motion analysis and inverse dynamics methods, combined with musculoskeletal modelling, static optimization, and finite element (FE) femur model, the difference of femoral neck strains between stair ascent vs. descent, young vs. older populations was compared. A two-way repeated-measures MANOVA was applied to test the effect of age and stair direction on the femoral neck strains. The strains at the femoral neck cross-section were greater for stair descent than ascent for both age groups (mostly P = 0.001 to 0006) but there was no difference between age groups. In this study, femoral neck strains represented bone loading environment in more direct ways than joint reaction forces/moments or joint contact forces, the risk of hip pain, falls and stress fractures might be greater during stair descent than ascent. Possible preventative methods to reduce these risks should be developed in the future studies.

Measuring femoral neck loads in healthy young and older adults during stair ascent and descent.

Understanding the hip loading environment for daily activities is useful for hip fracture prevention, rehabilitation, and the design of osteogenic exercises. Seventeen older adults (50-70 yrs) and twenty young adults (18-30 yrs) were recruited. A rigid body model combined with a musculoskeletal model was used to estimate lower extremity loading. An elliptical cross-section model of the femoral neck was used to estimate femoral neck stress during stair ascent and descent. Two peaks were identified in the stress curves, corresponding to the peaks in the vertical ground reaction force. During stair ascent, significantly higher tension on the superior femoral neck was found for the young group at peak 1 (young: 13.5±6.1 MPa, older: 4.2±6.5 MPa, p<0.001). Also during stair ascent, significantly higher compression on the posterior femoral neck was found for the older group at peak 2 (young: -11.4±4.9 MPa, old: -18.1±8.6 MPa, p = 0.006). No significant difference was found for stair descent. Components of stress (muscle vs. reaction forces; axial forces vs. bending moments) were also examined for each trial of stair ascent and descent. The stresses and their components provided loading magnitude and locations of higher stress on the femoral neck during stair ascent and descent. Understanding femoral neck stresses may be used to help prevent hip fractures, reduce pain, improve rehabilitation, and design osteogenic exercises.

Tibial stress during running following a repeated calf-raise protocol.

Tibial stress fractures are a problematic injury among runners. Increased loading of the tibia has been observed following prolonged weight-bearing activity and is suggested to be the result of reduced activity of the plantar flexor muscles. The musculature that spans the tibia contributes to bending of the bone and influences the magnitude of stress on the tibia during running. Participant-specific models of the tibia can be used as a non-invasive estimate of tibial stress. This study aimed to quantify tibial stress during running using participant-specific bone geometry and to compare tibial stress before and after a protocol of repeated muscular contractions of the plantar flexor muscle group. Fourteen participants who run recreationally were included in the final analysis of the study. Synchronized force and kinematic data were collected during overground running before and after an exhaustive, weighted calf-raise protocol. Bending moments and stress at the distal third of the tibia were estimated using beam theory combined with inverse dynamics and musculoskeletal modeling. Bone geometry was obtained from magnetic resonance images. There was no difference in stress at the anterior, posterior, medial, or lateral peripheries of the tibia after the calf-raise protocol compared with before. These findings suggest that an exhaustive, repeated calf-raise protocol did not alter tibial stress during running.

ISB recommendations on the reporting of intersegmental forces and moments during human motion analysis.

The International Society of Biomechanics (ISB) has charged this committee with development of a standard similar in scope to the kinematic standard proposed in Wu et al. (2002) and Wu et al. (2005). Given the variety of purposes for which intersegmental forces and moments are used in biomechanical research, it is not possible to recommend a particular set of analysis standards that will be acceptable in all applications. Instead, it is the purpose of this paper to recommend a set of reporting standards that will result in an understanding of the differences between investigations and the ability to reproduce the research. The end products of this standard are (1) a critical checklist that can be used during submission of manuscripts and abstracts to insure adequate description of methods, and (2) a web based visualization tool that can be used to alter the coordinate system, normalization technique and internal/external perspective of intersegmental forces and moments during walking and running so that the shape and magnitude of the curves can be compared to one's own data.

Estimating Tibial Stress throughout the Duration of a Treadmill Run.

INTRODUCTION: Stress fractures of the tibia are a problematic injury among runners of all levels. Quantifying tibial stress using a modeling approach provides an alternative to invasive assessments that may be used to detect changes in tibial stress during running. This study aimed to assess the repeatability of a tibial stress model and to use this model to quantify changes in tibial stress that occur throughout the course of a 40-min prolonged treadmill run. METHODS: Synchronized force and kinematic data were collected during prolonged treadmill running from 14 recreational male rearfoot runners on two separate occasions. During each session, participants ran at their preferred speed for two consecutive 20-min runs, separated by a 2-min pause. The tibia was modeled as a hollow ellipse and bending moments and stresses at the distal third of the tibia were estimated using beam theory combined with inverse dynamics and musculoskeletal modeling. RESULTS: Intraclass correlation coefficients indicated good-to-excellent repeatability for peak stress values between sessions. Peak anterior and posterior stresses increased after 20 min of prolonged treadmill running and were 15% and 12% greater, respectively, after 40 min of running compared with the start of the run. CONCLUSION: The hollow elliptical tibial model presented is a repeatable tool that can be utilized to assess within-participant changes in peak tibial stress during running. The increased stresses observed during a prolonged treadmill run may have implications for the development of tibial stress fracture.

Kinematics and metabolic cost of running on an irregular treadmill surface.

The purpose of this study was to investigate the kinematic and metabolic effects of running on an irregular surface. We also examined how altering the frontal plane foot angle (inversion/eversion) at contact using real-time visual feedback would affect these other variables. Sixteen participants completed three running bouts lasting 5-7 minutes each on an irregular surface (IS) treadmill, a traditional smooth surface (SS) treadmill, and on SS while receiving visual feedback of the frontal plane foot angle at contact (SSF) with a goal of matching IS foot angle on SS. Frontal plane foot angle increased 40% from IS to SS (IS: 8.4 ± 4.09°, SS: 11.8 ± 4.52°, P < 0.0001, ES 1.40). Knee flexion angle at contact decreased 33% from IS to SS (IS: 9.2 ± 4.88°, SS: 6.2 ± 5.03°, P < 0.0001, ES 1.30). Rate of oxygen consumption decreased by 10% from IS to SS (IS: 37.9 ± 5.68 ml·kg-1·min-1, SS: 34.1 ± 5.07 ml·kg-1·min-1, P < 0.0001, ES 3.05). PSD of leg accelerations decreased by 38% (IS: 0.17 ± 0.07 g2/Hz, SS: 0.106 ± 0.05 g2/Hz, P < 0.000, ES 1.69). Frontal plane foot angle decreased by 14% from SS to SSF (SS: 11.8 ± 4.52°, SSF: 10.1 ± 4.42°, P = 0.027. ES 0.62) but did not result in significant changes in any other variables. There were no significant differences in shock attenuation between any conditions (IS: -9.8 ± 2.26 dB, SS: -9.5 ± 3.12 dB, SSF: -9.9 ± 2.62 dB, P = 0.671). Running with greater eversion on the irregular surface may be an attempt by runners to reduce the perceived potential of an inversion ankle sprain. As a partial compensation for the decreased foot angle, runners increased knee flexion. This maintained shock attenuation but increased the rate of oxygen consumption. Altering the foot angle at contact using feedback on the SS caused the knee angle at contact to increase, but did not change shock attenuation or metabolic cost.

Lower extremity joint loads in habitual rearfoot and mid/forefoot strike runners with normal and shortened stride lengths.

Our purpose was to compare joint loads between habitual rearfoot (hRF) and habitual mid/forefoot strikers (hFF), rearfoot (RFS) and mid/forefoot strike (FFS) patterns, and shorter stride lengths (SLs). Thirty-eight hRF and hFF ran at their normal SL, 5% and 10% shorter, as well as with the opposite foot strike. Three-dimensional ankle, knee, patellofemoral (PF) and hip contact forces were calculated. Nearly all contact forces decreased with a shorter SL (1.2-14.9% relative to preferred SL). In general, hRF had higher PF (hRF-RFS: 10.8 ± 1.4, hFF-FFS: 9.9 ± 2.0 BWs) and hip loads (axial hRF-RFS: -9.9 ± 0.9, hFF-FFS: -9.6 ± 1.0 BWs) than hFF. Many loads were similar between foot strike styles for the two groups, including axial and lateral hip, PF, posterior knee and shear ankle contact forces. Lateral knee and posterior hip contact forces were greater for RFS, and axial ankle and knee contact forces were greater for FFS. The tibia may be under greater loading with a FFS because of these greater axial forces. Summarising, a particular foot strike style does not universally decrease joint contact forces. However, shortening one's SL 10% decreased nearly all lower extremity contact forces, so it may hold potential to decrease overuse injuries associated with excessive joint loads.

Femoral Neck Stress in Older Adults During Stair Ascent and Descent.

A detailed understanding of the hip loading environment is needed to help prevent hip fractures, minimize hip pain, rehabilitate hip injuries, and design osteogenic exercises for the hip. The purpose of this study was to compare femoral neck stress during stair ascent and descent and to identify the contribution of muscles and reaction forces to the stress environment in mature adult subjects (n = 17; age: 50-65 y). Motion analysis and inverse dynamics were combined with musculoskeletal modeling and optimization, then used as input to an elliptical femoral neck cross-sectional model to estimate femoral neck stress. Peak stress values at the 2 peaks of the bimodal stress curves (stress vs time plot) were compared between stair ascent and descent. Stair ascent had greater compressive stress than descent during the first peak at the anterior (ascent: -18.0 [7.9] MPa, descent: -12.9 [5.4] MPa, P < .001) and posterior (ascent: -34.4 [10.9] MPa, descent: -27.8 [10.1] MPa, P < .001) aspects of the femoral neck cross section. Stair descent had greater tensile stress during both peaks at the superior aspect (ascent: 1.3 [7.0] MPa, descent: 24.8 [9.7] MPa, peak 1: P < .001; ascent: 15.7 [6.1] MPa, descent: 18.0 [8.4] MPa, peak 2: P = .03) and greater compressive stress during the second peak at the inferior aspect (ascent: -43.8 [9.7] MPa, descent: -51.1 [14.3] MPa, P = .004). Understanding this information can provide a more comprehensive view of bone loading at the femoral neck for older population.

A comparison of the ground reaction force frequency content during rearfoot and non-rearfoot running patterns.

Running with a non-rearfoot pattern has been claimed to reduce injury risk because the impact peak in the vertical ground reaction force (GRF) is visually absent in the time-domain compared with a rearfoot pattern. However, running results in a rapid deceleration of the lower extremity segments immediately following initial contact with the ground, regardless of footfall pattern. Therefore, the frequency content of the GRF is expected to contain evidence of this collision. The purpose of the present study was to characterize the waveform components of the GRF generated during the impact phase by habitual rearfoot and habitual non-rearfoot pattern groups using the continuous wavelet transform. Twenty rearfoot and 20 non-rearfoot participants ran over-ground at a standardized speed with their habitual footfall pattern. The continuous wavelet transform was performed on the resultant GRF vector and the vertical GRF. GRF signals generated by the non-rearfoot pattern group during early stance had maximum signal power of 15.4±9.1Hz occurring at 23.1±6.3% of stance, which is within the 10-20Hz range previously associated with impact in rearfoot runners. Maximum signal power occurred earlier in the impact phase (11.5±1.5%) and with a higher frequency (27.2±3.9Hz) in the rearfoot pattern group verses the non-rearfoot pattern group (P<0.05). While the impact force transient may not appear as a prominent feature within the time-domain GRF with a non-rearfoot pattern, the results indicate that both footfall patterns generate frequencies associated with the impact peak in the resultant and vertical GRF.

Femoral strain during walking predicted with muscle forces from static and dynamic optimization.

Mechanical strain plays an important role in skeletal health, and the ability to accurately and noninvasively quantify bone strain in vivo may be used to develop preventive measures that improve bone quality and decrease fracture risk. A non-invasive estimation of bone strain requires combined musculoskeletal - finite element modeling, for which the applied muscle forces are usually obtained from static optimization (SO) methods. In this study, we compared finite element predicted femoral strains in walking using muscle forces obtained from SO to those obtained from forward dynamics (FD) simulation. The general trends in strain distributions were similar between FD and SO derived conditions and both agreed well with previously reported in vivo strain gage measurements. On the other hand, differences in peak maximum (εmax) and minimum (εmin) principal strain magnitudes were as high as 32% between FD (εmax/εmin=945/-1271µÎµ) and SO (εmax/εmin=752/-859µÎµ). These large differences in strain magnitudes were observed during the first half of stance, where SO predicted lower gluteal muscle forces and virtually no co-contraction of the hip adductors compared to FD. The importance of these results will likely depend on the purpose/application of the modeling procedure. If the goal is to obtain a generalized strain distribution for adaptive bone remodeling algorithms, then traditional SO is likely sufficient. In cases were strain magnitudes are critical, as is the case with fracture risk assessment, bone strain estimation may benefit by including muscle activation and contractile dynamics in SO, or by using FD when practical.

An integrative modeling approach for the efficient estimation of cross sectional tibial stresses during locomotion.

The purpose of this research was to utilize a series of models to estimate the stress in a cross section of the tibia, located 62% from the proximal end, during walking. Twenty-eight male, active duty soldiers walked on an instrumented treadmill while external force data and kinematics were recorded. A rigid body model was used to estimate joint moments and reaction forces. A musculoskeletal model was used to gather muscle length, muscle velocity, moment arm and orientation information. Optimization procedures were used to estimate muscle forces and finally internal bone forces and moments were applied to an inhomogeneous, subject specific bone model obtained from CT scans to estimate stress in the bone cross section. Validity was assessed by comparison to stresses calculated from strain gage data in the literature and sensitivity was investigated using two simplified versions of the bone model-a homogeneous model and an ellipse approximation. Peak compressive stress occurred on the posterior aspect of the cross section (-47.5 ± 14.9 MPa). Peak tensile stress occurred on the anterior aspect (27.0 ± 11.7 MPa) while the location of peak shear was variable between subjects (7.2 ± 2.4 MPa). Peak compressive, tensile and shear stresses were within 0.52 MPa, 0.36 MPa and 3.02 MPa respectively of those calculated from the converted strain gage data. Peak values from a inhomogeneous model of the bone correlated well with homogeneous model (normal: 0.99; shear: 0.94) as did the normal ellipse model (r=0.89-0.96). However, the relationship between shear stress in the inhomogeneous model and ellipse model was less accurate (r=0.64). The procedures detailed in this paper provide a non-invasive and relatively quick method of estimating cross sectional stress that holds promise for assessing injury and osteogenic stimulus in bone during normal physical activity.

Select injury-related variables are affected by stride length and foot strike style during running.

BACKGROUND: Some frontal plane and transverse plane variables have been associated with running injury, but it is not known if they differ with foot strike style or as stride length is shortened. PURPOSE: To identify if step width, iliotibial band strain and strain rate, positive and negative free moment, pelvic drop, hip adduction, knee internal rotation, and rearfoot eversion differ between habitual rearfoot and habitual mid-/forefoot strikers when running with both a rearfoot strike (RFS) and a mid-/forefoot strike (FFS) at 3 stride lengths. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 42 healthy runners (21 habitual rearfoot, 21 habitual mid-/forefoot) ran overground at 3.35 m/s with both a RFS and a FFS at their preferred stride lengths and 5% and 10% shorter. RESULTS: Variables did not differ between habitual groups. Step width was 1.5 cm narrower for FFS, widening to 0.8 cm as stride length shortened. Iliotibial band strain and strain rate did not differ between foot strikes but decreased as stride length shortened (0.3% and 1.8%/s, respectively). Pelvic drop was reduced 0.7° for FFS compared with RFS, and both pelvic drop and hip adduction decreased as stride length shortened (0.8° and 1.5°, respectively). Peak knee internal rotation was not affected by foot strike or stride length. Peak rearfoot eversion was not different between foot strikes but decreased 0.6° as stride length shortened. Peak positive free moment (normalized to body weight [BW] and height [h]) was not affected by foot strike or stride length. Peak negative free moment was -0.0038 BW·m/h greater for FFS and decreased -0.0004 BW·m/h as stride length shortened. CONCLUSION: The small decreases in most variables as stride length shortened were likely associated with the concomitant wider step width. RFS had slightly greater pelvic drop, while FFS had slightly narrower step width and greater negative free moment. CLINICAL RELEVANCE: Shortening one's stride length may decrease or at least not increase propensity for running injuries based on the variables that we measured. One foot strike style does not appear universally better than the other; rather, different foot strike styles may predispose runners to different types of injuries.

Bone stress in runners with tibial stress fracture.

BACKGROUND: Combinations of smaller bone geometry and greater applied loads may contribute to tibial stress fracture. We examined tibial bone stress, accounting for geometry and applied loads, in runners with stress fracture. METHODS: 23 runners with a history of tibial stress fracture & 23 matched controls ran over a force platform while 3-D kinematic and kinetic data were collected. An elliptical model of the distal 1/3 tibia cross section was used to estimate stress at 4 locations (anterior, posterior, medial and lateral). Inner and outer radii for the model were obtained from 2 planar x-ray images. Bone stress differences were assessed using two-factor ANOVA (α=0.05). Key contributors to observed stress differences between groups were examined using stepwise regression. FINDINGS: Runners with tibial stress fracture experienced greater anterior tension and posterior compression at the distal tibia. Location, but not group, differences in shear stress were observed. Stepwise regression revealed that anterior-posterior outer diameter of the tibia and the sagittal plane bending moment explained >80% of the variance in anterior and posterior bone stress. INTERPRETATION: Runners with tibial stress fracture displayed greater stress anteriorly and posteriorly at the distal tibia. Elevated tibial stress was associated with smaller bone geometry and greater bending moments about the medial-lateral axis of the tibia. Future research needs to identify key running mechanics associated with the sagittal plane bending moment at the distal tibia as well as to identify ways to improve bone geometry in runners in order to better guide preventative and rehabilitative efforts.

Medial longitudinal arch mechanics before and after a 45-minute run.

BACKGROUND: Medial longitudinal arch integrity after prolonged running has yet to be well documented. We sought to quantify changes in medial longitudinal arch kinematics before and after a 45-min run in healthy recreational runners. METHODS: Thirty runners performed barefoot seated, standing, and running trials before and after a 45-min shod treadmill run. Navicular displacement, arch lengthening, and the arch height index were used to quantify arch deformation, and the arch rigidity index was used to quantify arch stiffness. RESULTS: There were no statistically significant differences in mean (95% confidence interval) values for navicular displacement (5.6 mm [4.7-6.4 mm]), arch lengthening (3.2 mm [2.6-3.9 mm]), change in arch height index (0.015 [0.012-0.018]), or arch rigidity index (0.95 [0.94-0.96]) after the 45-min run (all multivariate analyses of variance P ≥ .065). CONCLUSIONS: Because there were no statistically significant changes in arch deformation or rigidity, the structures of a healthy, intact medial longitudinal arch are capable of either adapting to cyclical loading or withstanding a 45-min run without compromise.