Semi-metallic polymers.

Polymers are lightweight, flexible, solution-processable materials that are promising for low-cost printed electronics as well as for mass-produced and large-area applications. Previous studies demonstrated that they can possess insulating, semiconducting or metallic properties; here we report that polymers can also be semi-metallic. Semi-metals, exemplified by bismuth, graphite and telluride alloys, have no energy bandgap and a very low density of states at the Fermi level. Furthermore, they typically have a higher Seebeck coefficient and lower thermal conductivities compared with metals, thus being suitable for thermoelectric applications. We measure the thermoelectric properties of various poly(3,4-ethylenedioxythiophene) samples, and observe a marked increase in the Seebeck coefficient when the electrical conductivity is enhanced through molecular organization. This initiates the transition from a Fermi glass to a semi-metal. The high Seebeck value, the metallic conductivity at room temperature and the absence of unpaired electron spins makes polymer semi-metals attractive for thermoelectrics and spintronics.

Nanoscale investigation of the electrical properties in semiconductor polymer-carbon nanotube hybrid materials.

The morphology and electrical properties of hybrids of a semiconducting polymer (namely poly(3-hexylthiophene) P3HT) and carbon nanotubes are investigated at the nanoscale with a combination of Scanning Probe Microscopy techniques, i.e., Conductive Atomic Force Microscopy (C-AFM) and time-resolved Current Sensing Force Spectroscopy Atomic Force Microscopy (CSFS-AFM, or PeakForce TUNA™). This allows us to probe the electrical properties of the 15 nm wide P3HT nanofibers as well as the interface between the polymer and single carbon nanotubes. This is achieved by applying controlled, low forces on the tip during imaging, which allows a direct comparison between the morphology and the electrical properties at the nanometre scale.

Impact of chain length, temperature, and humidity on the growth of long alkyltrichlorosilane self-assembled monolayers.

In this work, we have studied the growth of self-assembled monolayers (SAMs) on silicon dioxide (SiO(2)) made of various long alkyltrichlorosilane chains (16, 18, 20, 24, and 30 carbon atoms in the alkyl chain), at several values of temperature (11 and 20 °C in most cases) and relative humidity (18 and 45% RH). Using atomic force microscopy analysis, thickness measurements by ellipsometry, and contact angle measurements, we have built a model of growth behaviour of SAMs of those molecules according to the deposition conditions and the chain length. Particularly, this work brings not only a better knowledge of the less studied growth of triacontyltrichlorosilane (C(30)H(61)SiCl(3)) SAMs but also new results on SAMs of tetracosyltrichlorosilane (C(24)H(49)SiCl(3)) that have not already been studied to our knowledge. We have shown that the SAM growth behaviour of triacontyltrichlorosilane at 20 °C and 45% RH is similar to that obtained at 11 °C and 45% RH for shorter molecules of hexadecyltrichlorosilane (C(16)H(33)SiCl(3)), octadecyltrichlorosilane (C(18)H(37)SiCl(3)), eicosyltrichlorosilane (C(20)H(41)SiCl(3)) and tetracosyltrichlorosilane (C(24)H(49)SiCl(3)). We have also observed that the monolayers grow faster at 45% than at 18% RH, and surprisingly slower at 20 °C than at 11 °C. Another important result is that the growth time constant decreases with the number of carbon atoms in the alkyl chain except for C(24)H(49)SiCl(3) at 11 °C and 18% RH, and for C(30)H(61)SiCl(3). To our knowledge, such a chain length dependence of the growth time constant has never been reported. The latter and all the other results are interpreted by adapting a diffusion limited aggregation growth model.

Reversible positioning at submicrometre scale of carbon nanotubes mediated by pH-sensitive poly(amino-methacrylate) patterns.

The selective adsorption of carbon nanotubes (CNTs) on a pH-reversible PDMAEMA patterned gold surface is presented. In acidic conditions, a selective CNTs adsorption onto the polymer brushes is obtained due to ammonium-π interactions. The reversible behavior was shown by successive treatments in both alkaline and acidic solutions with CNTs.

Single and binary self-assembled monolayers of phenyl- and pentafluorophenyl-based silane species, and their phase separation with octadecyltrichlorosilane.

In this paper, we first present the study of the formation of phenyltrichlorosilane film and self-assembled monolayers of phenylalkyltrichlorosilane (PATCl), pentafluoro-phenylalkyltrichlorosilane (PFATCl), and a mixture of the two, on silicon covered by its native oxide. These monolayers are shown to grow in two steps with characteristic time constants. The first step is characterized by a similar time constant of growth for all the studied trichlorosilane molecules and attributed to chemisorption. The second step corresponds to the arrangement between molecules, accelerated by the presence of the short alkyl chain (3-4 carbon atoms), and by mixing phenyl and pentafluoro-phenyl terminal moieties, which is accounted for by hydrogen bonding CH···FC and/or attractive quadrupolar interactions within a face-to-face phenyl/pentafluoro-phenyl alternating stack arrangement. Such results should allow improvement of intermolecular stacking within conjugated molecular domains, which is particularly important for molecular electronic devices. In the second part, we studied how PATCl, PFATCl, and their mixture phase separate with octadecyltrichlorosilane (OTS) molecules in various ratios. The way to improve phase separation was studied modifying aromatic ring to ring as well as aromatic-aliphatic interactions. OTS island size and coverage are shown to be smaller with the aromatic phase that involves stronger ring to ring interactions, i.e., attractive interactions between the phenyl species by mixing phenyl and pentafluoro-phenyl rings. The best phase separation is obtained with PFATCl as the aromatic molecule. If nanoislands of aromatic molecules could not be observed in these experiments, we show that they are attainable by mixing OTS and aromatic small organotriethoxysilanes whose grafting kinetics is slower. These results pave the way to the control improvement of the composition and nanostructuration of SAMs, essential for their further use within molecular devices.

Synthesis and Characterization of Nanocomposites Based on Functional Regioregular Poly(3-hexylthiophene) and Multiwall Carbon Nanotubes.

New functionalized poly(3-hexylthiophene)s (P3HT) have been designed and synthesized with the aim of increasing the dispersion of carbon nanotubes (CNT) in solutions and in thin films of semiconducting polymers. Dispersion in solution has been assessed by sedimentation tests while the thin film morphology has been analyzed by TEM and AFM. Both the physisorption of P3HT chains (via pyrene end-groups) or their chemical grafting (onto amine functions generated on the CNT surface) lead to a much better dispersion in solution and in the solid. In thin films, P3HT fibrils are observed to arrange perpendicular to the CNT surface, which can be understood on the basis of molecular modeling simulations. Finally, the effect of dispersing those P3HT/CNT nanocomposites in bulk-heterojunction P3HT-based photovoltaic devices has been evaluated.

Superhydrophobic aluminum surfaces by deposition of micelles of fluorinated block copolymers.

Superhydrophobic surfaces are generated by chemisorption on aluminum substrates of fluorinated block copolymers synthesized by reversible addition-fragmentation chain transfer in supercritical carbon dioxide. In an appropriate solvent, those block copolymers can form micelles with a fluorinated corona, which are grafted on the aluminum substrate thanks to the presence of carboxylic acid groups in the corona. Water contact angle and drop impact analysis were used to characterize the wettability of the films at the macroscale, and atomic force microscopy measurements provided morphological information at the micro- and nanoscale. The simple solvent casting of the polymer solution on a hydroxylated aluminum surface results in a coating with multiscale roughness, which is fully superhydrophobic over areas up to 4 cm(2).

Improved performances of intraocular lenses by poly(ethylene glycol) chemical coatings.

Cataract surgery is a routine ophthalmologic intervention resulting in replacement of the opacified natural lens by a polymeric intraocular lens (IOL). A main postoperative complication, as a result of protein adsorption and lens epithelial cell (LEC) adhesion, growth, and proliferation, is the secondary cataract, referred to as posterior capsular opacification (PCO). To avoid PCO formation, a poly(ethylene glycol) (PEG) chemical coating was created on the surface of hydrogel IOLs. Attenuated total reflectance Fourier transform infrared spectroscopy, "captive bubble" and "water droplet" contact angle measurements, and atomic force microscopy analyses proved the covalent grafting of the PEG chains on the IOL surface while keeping unchanged the optical properties of the initial material. A strong decrease of protein adsorption and cell adhesion depending on the molar mass of the grafted PEG (1100, 2000, and 5000 g/mol) was observed by performing the relevant in vitro tests with green fluorescent protein and LECs, respectively. Thus, the study provides a facile method for developing materials with nonfouling properties, particularly IOLs.