A redox active rod coordination polymer from tetrakis(4-carboxylic acid biphenyl)tetrathiafulvalene.

An enlarged version of the ubiquitous tetrathiafulvalene-tetrabenzoic acid is described, with 4,4'-biphenyl moieties as spacers between the coordination moieties and the electroactive core. The obtained rectangular ligand has a 14 × 22 Å2 size and is combined with Zn(II) under solvothermal conditions to yield a coordination polymer endowed with large cavities of ca. 15 × 11 Å2/10 × 10 Å2. The topology of the material is discussed in detail using the Points of Extension and Metals (PE&M) or the Straight-rod (STR) representation, and the sqc1121 or tfo topological type of the structure is observed, respectively. Its stability towards solvent removal and electrical properties are discussed. The material does not present any permanent porosity upon desolvation according to nitrogen sorption measurements at 77 K. Nevertheless, a significant increase in conductivity is observed on compressed pellets of the material upon post-synthetic oxidation with iodine. Raman spectroscopy combined with density functional theory (DFT) calculations has been used to characterize the oxidation state of tetrakis(4-carboxylic acid biphenyl)tetrathiafulvalene for coordination polymers.

Expanding the horizons of porphyrin metal-organic frameworks via catecholate coordination: exploring structural diversity, material stability and redox properties.

Porphyrin based Metal-Organic Frameworks (MOFs) have generated high interest because of their unique combination of light absorption, electron transfer and guest adsorption/desorption properties. In this study, we expand the range of available MOF materials by focusing on the seldom studied porphyrin ligand H10TcatPP, functionalized with tetracatecholate coordinating groups. A systematic evaluation of its reactivity with M(iii) cations (Al, Fe, and In) led to the synthesis and isolation of three novel MOF phases. Through a comprehensive characterization approach involving single crystal and powder synchrotron X-ray diffraction (XRD) in combination with the local information gained from spectroscopic techniques, we elucidated the structural features of the solids, which are all based on different inorganic secondary building units (SBUs). All the synthesized MOFs demonstrate an accessible porosity, with one of them presenting mesopores and the highest reported surface area to date for a porphyrin catecholate MOF (>2000 m2 g-1). Eventually, the redox activity of these solids was investigated in a half-cell vs. Li with the aim of evaluating their potential as electrode positive materials for electrochemical energy storage. One of the solids displayed reversibility during cycling at a rather high potential (∼3.4 V vs. Li+/Li), confirming the interest of redox active phenolate ligands for applications involving electron transfer. Our findings expand the library of porphyrin-based MOFs and highlight the potential of phenolate ligands for advancing the field of MOFs for energy storage materials.

Coordinatively Cross-Linked Binders for Silicon-Based Electrodes for Li-Ion Batteries: Beneficial Impact on Mechanical Properties and Electrochemical Performance.

A simple and versatile preparation of Zn(II)-poly(carboxylates) reticulated binders by the addition of Zn(II) precursors (ZnSO4, ZnO, or Zn(NO3)2) into a preoptimized poly(carboxylic acids) binder solution is proposed. These binders lead systematically to a significantly improved electrochemical performance when used for the formulation of silicon-based negative electrodes. The formation of carboxylate-Zn(II) coordination bonds formation is investigated by rheology and FTIR and NMR spectroscopies. Mechanical characterizations reveal that the coordinated binder offers a better electrode coating cohesion and adhesion to the current collector, as well as higher hardness and elastic modulus, which are even preserved in the presence of a carbonate solvent (i.e., in battery operation conditions). Ultimately, as shown from operando dilatometry experiments, the electrode expansion during lithiation is reduced, mitigating electrode mechanical failure. Such coordinatively reticulated electrodes outperform their uncoordinated counterparts with an improved capacity retention of over 30% after 60 cycles.

Nanoscale Morphological Characterization of Coordinated Binder and Solid Electrolyte Interphase in Silicon-Based Electrodes for Li-Ion Batteries.

The physical crosslinking of polymeric binders through coordination chemistry significantly improves the electrochemical performance of silicon-based negative electrodes. Scanning electron microscopy coupled with energy dispersive X-ray spectroscopy is used to probe the nanoscale morphology of such electrodes. This technique reveals the homogeneous coordination of carboxylated binder with Zn cations and its layering on the silicon surface. The solid electrolyte interphase (SEI) formed after the first cycle is denser with Zn-coordinated binder and preferentially observed on binder-depleted zones. The superiority of coordinated binders can be attributed to their capacity to better stabilize the electrode and the SEI layer due to improved mechanical properties. This results in a lower SEI impedance, a higher first cycle coulombic efficiency, and a 40% improvement of capacity retention after 50 cycles for highly loaded electrodes of over 6 mAh cm-2 .

Deciphering the Thermal and Electrochemical Behaviors of Dual Redox-Active Iron Croconate Violet Coordination Complexes.

Interest in coordination compounds based on non-innocent ligands (NILs) for electrochemical energy storage has risen in the last few years. We have focused our attention on an overlooked redox active linker, croconate violet, which has not yet been addressed in this field although closely related to standard NILs such as catecholate and tetracyanoquinodimethane. Two anionic complexes consisting of Fe(II) and croconate violet (-2) with balancing potassium cations were isolated and structurally characterized. By a combination of in situ and ex situ techniques (powder and single-crystal X-ray diffraction, infrared, and 57Fe Mössbauer spectroscopies), we have shown that their dehydration occurs through complex patterns, whose reversibility depends on the initial crystal structure but that the structural rearrangements around the iron cations occur without any oxidation. While electrochemical studies performed in solution clearly show that both the organic and inorganic parts can be reversibly addressed, in the solid state, poor charge storage capacities were initially measured, mainly due to the solubilization of the solids in the electrolyte. By optimizing the formulation of the electrode and the composition of the electrolyte, a capacity of >100 mA h g-1 after 10 cycles could be achieved. This suggests that this family of redox active linkers deserves to be investigated for solid-state electrochemical energy storage, although it requires the solving of the issues related to the solubilization of the derived coordination compounds.

A tris-oxovanadium pyrogallate complex: synthesis, structure, and magnetic and electronic properties.

With the aim of identifying new cation-phenolate complexes, we herein investigated the reactivity of pyrogallol (H3pgal) with vanadium salts. A trimetallic anionic complex was identified, and found to be formed under a broad set of reaction conditions. This complex, with the formula V3O3(pgal)33-, consists of three oxovanadium(IV) units connected together by three pyrogallate ligands to afford a bowl-shaped species presenting a pseudo 3-fold symmetry axis. Its crystal structure is reported, as well as its characterisation by a broad set of techniques, including powder X-ray diffraction, thermogravimetric analysis, infrared and Raman spectroscopy, and solid state UV-visible diffuse reflectance. Its redox activity both in solution and in the solid state is described, together with its magnetic behavior. Finally, the relevance of this trimetallic unit in the field of phenolic-based biocoatings and Metal Organic Framework (MOF) synthesis is briefly discussed.

Dual Electroactivity in a Covalent Organic Network with Mechanically Interlocked Pillar[5]arenes.

The synthesis and characterization of a polyrotaxanated covalent organic network (CON) based on the association between the viologen and pillar[5]arene (P[5]OH) units are reported. The mechanical bond allows for the irreversible insertion of n-type redox centers (P[5]OH macrocycles) within a pristine structure based on p-type viologen redox centers. Both redox units are active on a narrow potential range and, in water, the presence of P[5]OH greatly increases the electroactivity of the material.

Porphyrin and phthalocyanine-based metal organic frameworks beyond metal-carboxylates.

Given the ubiquitous role of porphyrins in natural systems, these molecules and related derivatives such as phthalocyanines are fascinating building units to achieve functional porous materials. Porphyrin-based MOFs have been developed over the past three decades, yet chemically robust frameworks, necessary for applications, have been achieved much more recently and this field is expanding. This progress is partially driven by the development of porphyrins and phthalocyanines bearing alternative coordinating groups (phosphonate, azolates, phenolates…) that allowed moving the related MOFs beyond metal-carboxylates and achieving new topologies and properties. In this perspective article we first give a brief outline of the synthetic pathways towards simple porphyrins and phthalocyanines bearing these complexing groups. The related MOF compounds are then described; their structural and textural properties are discussed, as well as their stability and physical properties. An overview of the resulting nets and topologies is proposed, showing both the similarities with metal-carboxylate phases and the peculiarities related to the alternative coordinating groups. Eventually, the opportunities offered by this recent research topic, in terms of both synthesis pathways and modulation of pore size and shape, stability and physical properties, are discussed.

Vapor-Phase Infiltration inside a Microporous Porphyrinic Metal-Organic Framework for Postsynthesis Modification.

Vapor-phase infiltration (VPI), a technique derived from atomic layer deposition (ALD) and based on sequential self-limiting chemistry, is used to modify the stable microporous porphyrin-based metal-organic framework (MOF) MIL-173(Zr). VPI is an appealing approach to modifying MOFs by inserting reactants with atomic precision. The microporous nature and chemical stability of MIL-173 enable postsynthesis modification by VPI without MOF degradation even with extremely reactive precursors such as trimethylaluminum (TMA) and diethylzinc (DEZ). VPI proceeds through the diffusion of gaseous organometallic reactants TMA and DEZ inside the microporous framework, where they react with two kinds of chemical sites offered by the porphyrinic linker (phenolic and pyrrolic functions in the porphyrin core), without altering the crystallinity and permanent porosity of the MOF. 27Al NMR, UV-vis absorption, and IR spectroscopies are used to further characterize the modified material. Physisorption of both precursors is computationally simulated by grand canonical Monte Carlo methods and outlines the preferential adsorption sites. The impact of temperature, number of VPI cycles, and pulse length are investigated and show that aluminum and zinc are introduced in a saturating manner inside the MOF on both available reactive sites. The porosity prerequisite is outlined for VPI, which is proven to be much more effective than classical solution-based methods because it is solventless and fast, prevents workup steps, and allows reactions not possible by the classical solution approach.

A new proton-conducting Bi-carboxylate framework.

A new robust Bi-carboxylate metal-organic framework (MOF) IEF-2 was hydrothermally prepared, acting as a proton carrier (σ∼ 1.1 × 10-4 S cm-1). Such proton conductivity is among the highest reported so far for purely 3D carboxylate-based MOFs, being explained by the existence of a 1D hydrogen-bond network, as suggested by structural analysis and theoretical studies.

Fluorescent Zr(IV) Metal-Organic Frameworks Based on an Excited-State Intramolecular Proton Transfer-Type Ligand.

We report here the preparation of a series of Zr(IV) metal-organic frameworks (MOFs) of the MIL-140 structure type incorporating a ligand exhibiting an intense excited-state intramolecular proton transfer (ESIPT) fluorescence. These solids were obtained by systematically varying the substitution rate of 4,4'-biphenyldicarboxylate by 2,2'-bipyridine-3,3'-diol-5,5'-dicarboxylate, and they were thoroughly characterized by complementary techniques, including high-resolution powder X-ray diffraction, solid-state NMR spectroscopy, nitrogen sorption experiments, and time-resolved fluorescence. We show that the incorporation of the ESIPT-type ligand induces an increase of the hydrophilicity, leading ultimately to a higher sensitivity toward hydrolysis, a phenomenon rarely observed in this structure type, which is considered as one of the most stable among the Zr carboxylate MOFs. Eventually, optimization of the amount of fluorescent ligand within the structure allowed combining a decent microposity ( SBET > 750 m2·g-1) and a high stability even in boiling water, together with a high fluorescence quantum yield (>30%).

Correction: Modulation of the mechanical energy storage performance of the MIL-47(VIV) metal organic framework by ligand functionalization.

Correction for 'Modulation of the mechanical energy storage performance of the MIL-47(VIV) metal organic framework by ligand functionalization' by Pascal G. Yot et al., Dalton Trans., 2019, DOI: 10.1039/c8dt04214d.

Confinement of Fe-Al-PMOF catalytic sites favours the formation of pyrazoline from ethyl diazoacetate with an unusual sharp increase of selectivity upon recycling.

The catalytic properties of a chemically stable iron porphyrin MOF were evaluated in a reaction with ethyl diazoacetate. In contrast to its homogeneous counterpart, an Fe-porphyrin-MOF features a different reaction pathway leading to the formation of pyrazoline due to the confinement of catalytic sites within the MOF network. Unexpectedly, a sharp increase of the selectivity from 35% (run 1) to 86% (run 5) occurs upon catalyst recycling.

Coordination polymers built up from an s-tetrazine derived ligand and rare-earth ions: from a sequential dimensional expansion to organic-inorganic energy transfer.

Coordination polymers were prepared from a luminescent s-tetrazine ligand (OTz) and various rare-earth ions. Both the radii of the Ln ions and the synthetic conditions (especially pH) drive the formation of the product, and three crystalline phases were finally identified. Using a two-step process, it was possible to increase the dimensionality of one of these compounds from 1-D (MIL-165) to 2-D (MIL-166). The luminescence properties of these coordination polymers were studied. Whereas for Ln = La, Pr, Eu, Tb, the emission characteristic of the s-tetrazine core was observed, such emission was not detected for Ln = Nd, while the emission typical for the Nd ion was present, due to energy transfer from the tetrazine ligand to the Nd3+ ion.

A Flexible Fluorescent Zr Carboxylate Metal-Organic Framework for the Detection of Electron-Rich Molecules in Solution.

A novel Zr(IV) dicarboxylate metal organic framework (MOF) built up from an s-tetrazine derived ligand was prepared. This solid, which exhibits a diamond type network, combines a good stability in water, a structural flexibility, and fluorescence properties thanks to the organic ligand. It is noteworthy that this fluorescence is quenched when exposed to electron-rich molecules in solution, such as amines or phenol, this phenomenon being associated with the adsorption of the quencher, as unambiguously proven by X-ray diffraction (XRD) analysis. Finally, the quenching efficiency is shown to be governed not only by electronic and steric factors but also by the relative polarity of the solvent, the MOF, and the quencher. This work thus suggests that it is possible to develop new MOF-based sensors presenting in a given medium (such as water) highly selective responses.

Adaptability of the metal(iii,iv) 1,2,3-trioxobenzene rod secondary building unit for the production of chemically stable and catalytically active MOFs.

The use of a 5,10,15,20-tetrakis(3,4,5-trihydroxyphenyl)porphyrin has yielded a new MOF based on M-1,2,3-trioxobenzene chains that can be made of M = Zr(iv) or RE(iii) (RE = rare earth), showing a very high and limited chemical stability, respectively. The robust metallated Zr-analogue, Co-MIL-173(Zr), has proven to be a heme-like heterogeneous catalyst suitable for aerobic oxidation of hydrocarbons.

Titanium coordination compounds: from discrete metal complexes to metal-organic frameworks.

Owing to their promise in photocatalysis and optoelectronics, titanium based metal-organic frameworks (MOFs) are one of the most appealing classes of MOFs reported to date. Nevertheless, Ti-MOFs are still very scarce because of their challenging synthesis associated with a poor degree of control of their chemistry and crystallization. This review aims at giving an overview of the recent progress in this field focusing on the most relevant existing titanium coordination compounds as well as their promising photoredox properties. Not only Ti-MOFs but also Ti-oxo-clusters will be discussed and particular interest will be dedicated to highlight the different successful synthetic strategies allowing to overcome the still "unpredictable" reactivity of titanium ions, particularly to afford crystalline porous coordination polymers.

Synthesis Optimization, Shaping, and Heat Reallocation Evaluation of the Hydrophilic Metal-Organic Framework MIL-160(Al).

The energy-storage capacities of a series of water-stable porous metal-organic frameworks, based on high-valence metal cations (Al3+ , Fe3+ , Cr3+ , Ti4+ , Zr4+ ) and polycarboxylate linkers, were evaluated under the typical conditions of seasonal energy-storage devices. The results showed that the microporous hydrophilic Al-dicarboxylate MIL-160(Al) exhibited one of the best performances. To assess the properties of this material for space-heating applications on a laboratory pilot scale with an open reactor, a new synthetic route involving safer, greener conditions was developed. This led to the production of MIL-160(Al) on a 400 g scale, before the material was shaped into pellets through a wet-granulation method. The material exhibited a very high energy-storage capacity for a physical-sorption material (343 Wh kg-1 ), which is in full agreement with the predicted value.

Crystal structure dependent in vitro antioxidant activity of biocompatible calcium gallate MOFs.

Two novel 3-D coordination polymers, denoted MIL-155 and MIL-156 (MIL stands for Materials Institute Lavoisier), built up from calcium and the naturally occurring gallic acid (H4gal), have been hydrothermally synthesized and their crystal structures were determined by single-crystal X-ray diffraction. These solids are based on different inorganic subunits: infinite chains of edge-sharing dimers of CaO7 polyhedra linked through partially deprotonated gallate ligands (H2gal2-) for MIL-155 or [Ca2(H2O)(H2gal)2]·2H2O, and ribbon-like inorganic subunits containing both eight-fold or six-fold coordinated CaII ions linked through fully deprotonated gallate ligands (gal4-) for MIL-156 or [Ca3K2(H2O)2(gal)2]·nH2O (n∼ 5). Both solids contain small channels filled with water molecules, with, however no accessible porosity towards N2 at 77 K. MIL-155 and MIL-156 were proven to be biocompatible, as evidenced by in vitro assays (viability and cell proliferation/death balance). While the high chemical stability of MIL-156 makes it almost bioinert, the progressive degradation of MIL-155 leads to an important protective antioxidant effect, associated with the release of the bioactive gallate ligand.

Tuning the iron redox state inside a microporous porphyrinic metal organic framework.

Two new 3D porphyrin-based metal organic frameworks were obtained by solvothermally reacting iron(iii) chloride, a free base (5,10,15,20-tetrakis[4-(2,3,4,5-tetrazolyl)phenyl]porphyrin) (H2TTPP) and either pyrazine or 1,4-diazabicyclo[2.2.2]octane (DABCO). Both MOFs displayed a 3-D open framework of the fry topology, where the inorganic building unit is a chain of corner-sharing FeN4O2 octahedra and the porphyrinic linker is metallated with iron during the reaction course, with the N-donor base bridging the iron of the porphyrinic cores. Through thorough structural and spectroscopic analyses of the pyrazine containing material the chemical formula [FeIIpzTTP(FeDMF1-xFeOHx)]n was inferred (x ≥ 0.25). Whereas the already reported carboxylate analogue is built up from a pure iron(iii) inorganic chain, here spectroscopic and structural studies evidenced a mixed valence iron(ii/iii) state, evidencing that, in agreement with the HSAB theory, the substitution of a carboxylate function by a tetrazolate one allows redox tuning. Finally, both materials feature one-dimensional channels of ca. 8 × 12 Å within the structures with permanent microporosity.