Participant experiences with a multipurpose vaginal ring for HIV and pregnancy prevention during a phase 1 clinical trial: learning from users to improve acceptability.

Introduction: With high concurrent global rates of HIV incidence and unintended pregnancy, there is a need to provide options beyond condoms to enable users to simultaneously prevent HIV acquisition and pregnancy. Multiple vaginal rings are in development as "MPTs" (multipurpose prevention technologies) as they are shown to provide several co-occurring benefits such as discretion, convenience, reversibility and user control. Methods: In this Phase 1 trial of a 3-month MPT ring in the U.S., 25 participants (low-risk for HIV and pregnancy) were randomized to use the study ring for 90 days continuously or in 28-day cycles with 2-day removal periods in between. All participants completed in-depth interviews at the end of their study participation. Results: Overall, the ring was well tolerated. Participants resoundingly endorsed the concept of an extended-use, dual-purpose vaginal ring, but reported too many functional challenges and side effects to endorse this particular ring. Participants assigned to the continuous regimen reported more positive experiences with ring use than those in the cyclic group. A minority of participants who experienced minimal side effects and did not experience challenges with vaginal retention of the ring found it appealing. However, the majority of participants experienced challenges (ring slippage, expulsions, side effects, vaginal bleeding changes) with product use that outweighed the potential benefits and led them to report that - in the future - they would not be interested in using this specific version of the ring in its current form. A subset expressed interest in using the current MPT ring under certain conditions (e.g., if fewer expulsions, less bleeding, higher risk for HIV/pregnancy). Discussion: User feedback regarding participant experiences and challenges with the study ring was continuously shared with the product developer, underscoring the value of early-stage end-user feedback in product development.

Refining the in vitro release test method for a dapivirine-releasing vaginal ring to match in vivo performance.

Previously reported in vitro release test methods for drug-releasing vaginal rings containing poorly water-soluble drugs have described use of water-alcohol systems or surfactant solutions in efforts to maintain sink conditions. Here, as part of efforts to more closely match in vitro and in vivo release for the 25 mg dapivirine matrix-type silicone elastomer vaginal ring for HIV prevention, we have investigated alternatives to the 1:1 v/v water/isopropanol medium described previously. Specifically, we evaluated dapivirine release from rings into (i) monophasic water/isopropanol mixtures of varying compositions and (ii) biphasic buffer/octanol systems using pH 4.2 and pH 7.0 buffers. The rate and mechanism of dapivirine release were dependent upon the isopropanol concentration in the release medium, in accordance with the observed trend in drug solubility. At 0 and 10% v/v isopropanol concentrations, dapivirine release followed a partition-controlled mechansim. For media containing ≥ 20% v/v isopropanol, in vitro release of dapivirine was significantly increased and obeyed permeation-controlled kinetics. Cumulative release of ~3.5 mg dapivirine over 28 days was obtained using a water isopropanol mixture containing 20% v/v isopropanol, similar to the ~4 mg dapivirine released in vivo. Dapivirine release into the biphasic buffer/octanol system (intended to mimic the fluid/tissue environment in vivo) was constrained by the limited solubility of dapivirine in the buffer component in which the ring resided, such that cumulative dapivirine release was consistently lower than that observed with the 20% v/v isopropanol in water medium. Release into the biphasic system was also pH dependent, in line with dapivirine's pKa and with potential implications for in vivo release and absorption in women with elevated vaginal pH.

In vitro drug release, mechanical performance and stability testing of a custom silicone elastomer vaginal ring releasing dapivirine and levonorgestrel.

We have previously reported a multipurpose silicone elastomer vaginal ring providing sustained release of dapivirine (an antiretroviral) and levonorgestrel (a progestin) for HIV prevention and hormonal contraception. During initial development, issues arose due to reaction between the ethynyl group in the levonorgestrel molecule and the hydride-functionalised polydimethylsiloxane components in the silicone elastomer formulation. This unwanted reaction occurred both during and to a lesser extent after ring manufacture, impacting the curing process, the mechanical properties of the ring, and the in vitro release of levonorgestrel. Recently, we reported custom silicone elastomer grades that minimise this reaction. In this follow-on study, we describe the manufacture, in vitro drug release, mechanical, and pharmaceutical stability testing of ring formulations prepared from a custom silicone elastomer and containing 200 mg dapivirine and 80, 160, 240 or 320 mg levonorgestrel. The rings showed mechanical properties similar to marketed ring products, sustained in vitro release of both drugs over 30 days in quantities deemed clinically relevant, offered acceptable assay values, and provided good product stability over 15 weeks at 40 °C and 75% relative humidity.

Acceptability of a Dapivirine/Placebo Gel Administered Rectally to HIV-1 Seronegative Adults (MTN-026).

This study describes the acceptability of a rectal microbicide gel formulation using dapivirine (DPV) among men and women from two countries (United States and Thailand) participating in the Microbicide Trials Network-026 trial. We evaluated participants' acceptability of a rectal DPV/placebo gel as part of a Phase I trial (N = 26; 18 male, 8 female). Participants reported favorable acceptability of the study gel, with most participants reporting that they liked the gel the same (n = 14; 53.8%) or more (n = 11; 42.4%) than when they started the trial. Over half of participants noted that they would prefer the gel over condoms (n = 13; 50%) or that they liked condoms and the gel equally (n = 8; 30.8%). Side effects across products included leakage (n = 8; 30.8%), diarrhea (n = 4; 15.4%), or soiling (n = 1; 3.8%). The high acceptability of a rectal gel underscores its promise as a short-acting biomedical prevention, warranting future research for HIV prevention.Trial Registration: NCT03239483.

RESUMEN: Este estudio describe la aceptabilidad de un microbicida rectal (RM) con dapivirina (DPV) formulado como un gel por hombres y mujeres de dos países (Estados Unidos y Tailandia) que participaron como parte del Microbicide Trials Network (MTN)-026. Evaluamos la aceptabilidad de un gel rectal de DPV y un placebo como parte de un estudio de Fase I (N = 26; 18 hombres, 8 mujeres). Los participants informaron una aceptabilidad favorable sobre el gel del estudio; la mayoría de los participantes informaron que les gustó el gel igual (n = 14; 53.8%) o más (n = 11; 42.4%) que cuando comenzaron el estudio. Más de la mitad de los participantes señalaron que preferirían el gel sobre los condones (n = 13; 50%) o que les gustaban los condones y el gel por igual (n = 8; 30,8%). Los efectos de los productos incluyeron fugas (n = 8; 30,8%), diarrea (n = 4; 15,4%) o ensuciamiento (n = 1; 3,8%). La alta aceptabilidad de un gel rectal enfatiza su promesa para la prevención biomédica de acción corta y justifica futuras investigaciones para la prevención del VIH.

A Randomized, Double Blind, Placebo-Controlled, Phase 1 Safety, and Pharmacokinetic Study of Dapivirine Gel (0.05%) Administered Rectally to HIV-1 Seronegative Adults (MTN-026).

Dapivirine (DPV), formulated as vaginal ring, demonstrated HIV risk reduction. MTN-026 explored DPV, formulated as rectal gel, for safety, pharmacokinetics (PK), and acceptability. HIV-uninfected men and women aged 18-45 years were enrolled at United States and Thailand sites and randomized 2:1 to receive DPV 0.05% or placebo gel via rectal applicator. A single-dose phase was followed by seven observed daily doses. Plasma and fluid and tissue from both rectum and cervix were collected at baseline and after the final dose over 72 h for PK, ex-vivo HIV-1 biopsy challenge, histology, and flow cytometry. Twenty-eight participants were randomized; 2 terminated early; 9 were female and 19 male; 12 were white, 11 Asian, 4 black, and 1 other race/ethnicity. Mean age was 28.5 and 34.2 years in the DPV and placebo arms, respectively. Thirty adverse events occurred (all Grade 1 or 2, except one unrelated Grade 3) without study arm differences. DPV rectal tissue concentrations [median (interquartile range)] 0.5-1 and 2 h after a single dose were 256 ng/g [below the lower limit of quantification (BLQ)-666] and BLQ (BLQ-600), respectively, then BLQ (BLQ-BLQ) from 24 to 72 h; concentrations following multiple doses were similar. The largest median DPV plasma concentrations were 0.33 ng/mL (0.15-0.48) after one dose and 0.40 (0.33-0.49) after seven doses. The DPV rectal gel was acceptable and without safety concerns. While DPV plasma concentrations were similar to the vaginal ring, rectal tissue concentrations were well below vaginal ring tissue concentrations, suggesting need for reformulation. Clinical trial number: NCT03239483.

Acceptability of a Dapivirine Gel Administered Rectally to HIV-1 Seronegative Adults (MTN-033 Study).

We triangulated quantitative and qualitative assessments to evaluate participants' acceptability of 0.05% dapivirine rectal microbicide (RM) gel administered via two separate modalities (a rectal applicator and an artificial phallus for use as a coital simulation device) as part of a Phase I trial (N = 14) among men who have sex with men (MSM) randomized using a 1:1 ratio. Overall, participants reported favorable acceptability of the gel (n = 11; 78.6%), the same or more at the end of the study compared to when they started the study. Additionally, when discussing their preferred administration modality, they noted that both methods had positive qualities but also potential areas of improvement. Our findings underscore the need to create multiple delivery methods for a future microbicide gel (i.e., with and without the need for an applicator) and highlight the importance of offering MSM choices in how biomedical HIV prevention strategies are delivered.

Phase 1 pharmacokinetics and safety study of extended duration dapivirine vaginal rings in the United States.

INTRODUCTION: Vaginal rings are a promising approach to provide a woman-centred, long-acting HIV prevention strategy. Prior trials of a 25 mg dapivirine (DPV) ring have shown a favourable safety profile and approximately 30% risk reduction of HIV-1 infection. Extended duration rings replaced every three months may encourage user adherence, improve health service efficiency and reduce cost overall. We evaluated safety, pharmacokinetics, adherence and acceptability of two three-month rings with different DPV dosages, compared with the monthly DPV ring. METHODS: From December 2017 to October 2018, MTN-036/IPM-047 enrolled 49 HIV-negative participant in Birmingham, Alabama and San Francisco, California into a phase 1, randomized trial comparing two extended duration (three-month) rings (100 or 200 mg DPV) to a monthly 25 mg DPV ring, each used over 13 weeks, with follow-up completed in January 2019. Safety was assessed by recording adverse events (AEs). DPV concentrations were quantified in plasma, cervicovaginal fluid (CVF) and cervical tissue, at nominal timepoints. Geometric mean ratios (GMRs) relative to the comparator ring were estimated from a regression model. RESULTS: There were no differences in the proportion of participants with grade ≥2 genitourinary AEs or grade ≥3 AEs in the extended duration versus monthly ring arms (p = 1.0). Plasma and CVF DPV concentrations were higher in the extended duration rings compared to the monthly ring. Plasma GMRs were 1.31 to 1.85 and 1.41 to 1.86 and CVF GMRs were 1.45 to 2.87 and 1.74 to 2.60 for the 100 and 200 mg ring respectively. Cervical tissue concentrations were consistently higher in the 200 mg ring (GMRs 2.36 to 3.97). The majority of participants (82%) were fully adherent (ring inserted at all times, with no product discontinuations/outages) with no differences between the monthly versus three-month rings. Most participants found the ring acceptable (median = 8 on 10-point Likert scale), with a greater proportion of participants reporting high acceptability (9 or 10) in the 25 mg arm (73%) compared with the 100 mg (25%) and 200 mg (44%) arms (p = 0.01 and p = 0.15 respectively). CONCLUSIONS: The extended duration DPV rings were well-tolerated and achieved higher DPV concentrations compared with the monthly DPV ring. These findings support further evaluation of three-month DPV rings for HIV prevention.

Use of simulated vaginal and menstrual fluids to model in vivo discolouration of silicone elastomer vaginal rings.

Vaginal rings releasing antiretrovirals - either alone or in combination with contraceptive progestins - are being developed for prevention of human immunodeficiency virus (HIV) transmission via vaginal sex. Following Phase I trials, significant discolouration was observed on the surface of investigational silicone elastomer antiretroviral-contraceptive matrix-type vaginal rings containing either 25 mg dapivirine or 200 mg dapivirine plus levonorgestrel. In this study, potential causes of the discolouration have been assessed in vitro using simulated vaginal and menstrual fluids (SVF and SMF, respectively) to model in vivo exposure. The fluid compositions also included hydrogen peroxide (H2O2), hydrogen peroxide plus a copper intrauterine device (IUD), or synthetic dyes (representing personal care and household cleaning products). No discolouration was observed for rings exposed to SVF + hydrogen peroxide (with or without an IUD). However, the SVF + dye compositions showed significant ring discolouration, with staining patterns similar to those observed with rings that had been exposed to highly-coloured personal care and household cleaning products during clinical trial use. Exposure of rings to SMF compositions invariably caused yellow surface discolouration, dark spotting and markings, similar to the staining patterns observed following clinical use. The darker marks on the ring surface were identified as blood debris derived from the SMF. The study indicates that surface discolouration of rings in vivo can be attributed to exposure to menstrual fluid or highly coloured personal care or household cleaning products. Discolouration of the rings was not associated with any specific safety risks for the user, though severe discolouration could potentially impact acceptability and adherence.

Safety, adherence, and HIV-1 seroconversion among women using the dapivirine vaginal ring (DREAM): an open-label, extension study.

BACKGROUND: The Ring Study, a phase 3 trial in 1959 sexually active women (randomised 2:1), showed a favourable safety profile and a 31% HIV-1 infection risk reduction for a vaginal ring containing 25 mg of dapivirine, compared with a placebo ring. We report here the DREAM study, which aimed to evaluate safety, adherence, and HIV-1 incidence in those using the dapivirine vaginal ring (DVR) in open-label use. METHODS: The DREAM study is an open-label extension of The Ring Study, done at five research centres in South Africa and one research centre in Uganda. Former participants from The Ring Study, who remained HIV-negative and who did not discontinue the study due to an adverse event or safety concern that was considered to be related to the investigational product, were eligible. Women who were pregnant, planning to become pregnant, or breastfeeding at screening for DREAM were excluded. All participants received the DVR for insertion at the enrolment visit. Participants attended a 1-month follow-up visit and could either proceed with visits once every 3 months or attend monthly visits up to month 3 and then continue with visits once every 3 months. At each visit, HIV testing and safety evaluations were done, and residual dapivirine measured in used rings (approximately 4 mg is released from the DVR over 28 days of consistent use). HIV-1 incidence was compared descriptively with the simulated incidence rate obtained from bootstrap sampling of participants in the placebo group of The Ring Study, matched for research centre, age, and presence of sexually transmitted infections at enrolment. This study is registered with ClinicalTrials.gov, NCT02862171. FINDINGS: Between July 12, 2016, and Jan 11, 2019, 1034 former participants from The Ring Study were screened, 941 were enrolled and 848 completed the trial. 616 (65·5%) of 941 participants reported treatment-emergent adverse events. Of these, six (0·6%) had events considered to be treatment-related. No treatment-related serious adverse events were reported. Measurements of monthly ring residual amounts in participants enrolled in both trials showed consistently lower mean values in DREAM than in The Ring Study. Arithmetic mean ring residual amounts of participants in The Ring Study DVR group who enrolled in DREAM were 0·25 mg lower (95% CI 0·03-0·47; p=0·027) than the mean ring residual amounts of these participants in The Ring Study. 18 (1·9%) HIV-1 infections were confirmed during DVR use, resulting in an incidence of 1·8 (95% CI 1·1-2·6) per 100 person-years, 62% lower than the simulated placebo rate. INTERPRETATION: Although efficacy estimation is limited by the absence of a placebo group, the observed low HIV-1 incidence and improved adherence observed in DREAM support the hypothesis that increased efficacy due to improved adherence occurs when women know the demonstrated safety and efficacy of the DVR. The feasibility of a visit schedule of once every 3 months was shown, indicating that the DVR can be used in a real-world situation in usual clinical practice. FUNDING: The Ministry of Foreign Affairs (MFA) Denmark, Flanders MFA, Irish Aid, Dutch MFA, UK Aid from the UK Government's Foreign, Commonwealth and Development Office, and the US President's Emergency Plan for AIDS Relief through the US Agency for International Development.

Silicone elastomer formulations for improved performance of a multipurpose vaginal ring releasing dapivirine and levonorgestrel.

A dapivirine-releasing silicone elastomer vaginal ring for reducing women's risk of HIV acquisition has recently been approved. A next-generation multipurpose vaginal ring releasing dapivirine and levonorgestrel is currently in development, offering hormonal contraception and HIV prevention from a single device. Previously, we reported challenges with incorporating levonorgestrel into rings manufactured from addition-cure silicone elastomers due to an irreversible chemical reaction between the levonorgestrel molecule and the hydride-functionalised crosslinker component of the silicone elastomer formulation, leading to low drug content assay, cure inhibition, and reduced ring mechanical properties (which may account for the increased incidence of ring expulsion in vivo). Here, we report on the development and testing of various custom silicone elastomer materials specifically formulated to circumvent these issues. After extensive testing of the custom silicones and subsequent manufacture and testing (Shore M hardness, pot life, content assay, oscillatory rheology, mechanical testing) of rings containing both dapivirine and levonorgestrel, a lead candidate formulation was selected that was amenable to practical ring manufacture via injection molding, exhibited no substantial levonorgestrel binding, and offered suitable mechanical properties.

Dapivirine-releasing vaginal rings produced by plastic freeforming additive manufacturing.

Here we report the first use of an additive manufacturing (AM) technique based on high pressure material jetting of molten thermoplastic for the fabrication of dapivirine (DPV) loaded vaginal rings (VRs). The VRs are compared to those produced conventionally using injection molding (IM). VRs (outer diameter 54.0 mm, cross-sectional diameter 4.0 mm) were manufactured by either injection molding or Arburg Plastic Freeforming (APF) - a proprietary droplet deposition modelling (DDM) process, using medical grade thermoplastic polyurethanes (TPUs) loaded with 10% w/w DPV. This unique DDM process was used to produce rings of 100, 50 and 10% matrix infill density. DDM printed VRs with 10% density (57-62 mg drug load) exhibited up to seven-fold increase in DPV release compared to injection molded rings containing 190-194 mg DPV. This work has shown that DDM using the APF technique can be used to manufacture drug delivery devices of varying geometries, densities and surface areas to give precise levels of control over the drug release kinetics. This work presents a new opportunity to increase the release of poorly water-soluble compounds or to achieve desired dosing levels using lower drug loadings than those required using conventional thermoplastic processing techniques.

Towards a dapivirine and levonorgestrel multipurpose vaginal ring: Investigations into the reaction between levonorgestrel and addition-cure silicone elastomers.

With a dapivirine-releasing vaginal ring having successfully completed late-stage clinical testing for HIV prevention and currently undergoing regulatory review, there is now growing interest in next-generation multipurpose prevention technologies that seek to combine antiretroviral and contraceptive drugs within a single product. Here, we focus on ongoing efforts to develop a silicone elastomer vaginal ring releasing both dapivirine and levonorgestrel. Specifically, we evaluate various strategies aimed at both better understanding and reducing the tendency of levonorgestrel to bind with the elastomer, including: (i) formulation and post-manufacturing strategies aimed at reducing the extent of levonorgestrel reaction with addition-cure silicone elastomers; (ii) evaluation of a simple silicone system to model the complex elastomer; (iii) use of model compounds representing the enone and ethinyl moieties of levonorgestrel to probe the mode of addition of levonorgestrel to addition-cure silicone elastomers; and (iv) solution and solid-state 13C NMR analysis to probe the structural features of the levonorgestrel-silicone system. The results demonstrate that both the enone and ethinyl groups within levonorgestrel undergo hydrosilylation reactions with the hydrosiloxane groups in the silicone elastomer leading to covalent binding. The results also highlight potential strategies for further optimising the dapivirine + levonorgestrel silicone vaginal ring formulation to ensure that the levonorgestrel is available for release.

Novel Application of Hot Melt Extrusion for the Manufacturing of Vaginal Films Containing Microbicide Candidate Dapivirine.

Polymeric films are safe and effective and can be used for vaginal administration of microbicide drug candidates. Dapivirine (DPV), an investigational and clinically advanced antiretroviral drug, was selected as a model compound for this study. We have previously developed and clinically tested a quick-dissolving DPV film using solvent cast (SC) manufacturing technique. As an alternative to current pharmaceutical film manufacturing techniques, we investigated hot melt extrusion (HME) process in this study because it has several benefits, including its capacity as a continuous manufacturing process, lack of solvents, smaller footprint, and ease of scalability. The goal of this work was to evaluate the feasibility of using HME for DPV vaginal film manufacturing and to develop a robust manufacturing process using HME by evaluating the effect of process parameters on film quality and performance. DPV was successfully incorporated into a vaginal film using HME and maintained acceptable characteristics. Three process parameters (zone temperature, screw speed, and feed rate) had an impact on film quality and performance. Of these, the zone temperature was found to most significantly affect weight, thickness, puncture strength, and dissolution of films. Additionally, film manufacturing using HME was highly reproducible. Finally, the DPV HME film was comparable to films manufactured using SC in terms of physicochemical, biological, and safety characteristics including in vitro drug release, mechanical strength, tissue permeability, compatibility with commensal vaginal Lactobacilli, and in vitro bioactivity. These results demonstrate that HME is an effective, robust, and viable manufacturing method to produce vaginal films.

Drug stability and product performance characteristics of a dapivirine-releasing vaginal ring under simulated real-world conditions.

In two recent Phase III clinical trials, use of a 25 mg dapivirine vaginal ring significantly reduced HIV acquisition rates. Post hoc analysis from one of the trials indicated higher rates of protection among women over the age of 21 years when compared to younger women, most likely due to reduced adherence in the latter group. There is currently no information available on how release of dapivirine from the ring is affected by either its intermittent removal from the vagina or women's cleaning of the ring before re-insertion. Here, in vitro drug stability and product performance characteristics of the dapivirine ring were assessed under simulated conditions of real-world use. The impact of systematic deviations from the 28-day continuous use protocol upon in vitro release performance, was investigated. Also, the effect of ring exposure to a range of common household chemicals - including bath salts, bleach, detergent and personal lubricants - was examined through measurement of dapivirine content and stability. Dapivirine in vitro release under intermittent schedules was similar to that obtained under the normal continuous schedule ignoring the periods of interruption. Ring exposure to various household chemicals had no discernible impact on dapivirine assay value, degradation or stability.

Development and pharmacokinetics of a combination vaginal ring for sustained release of dapivirine and the protein microbicide 5P12-RANTES.

The past fifteen years have witnessed a resurgence of interest in vaginal ring technologies for drug delivery applications, mostly driven by the impetus for development of vaginally-administered antiretroviral microbicides to help reduce the high acquisition rates for human immunodeficiency virus (HIV) among Sub-Saharan African women. Currently, the lead candidate microbicide is a 28-day silicone elastomer vaginal ring releasing dapivirine (Ring-004), an experimental non-nucleoside reverse transcriptase inhibitor. The ring was tested in two pivotal Phase III clinical studies in 2016 and is currently undergoing review by the European Medicines Agency. Recently, we described a new type of silicone elastomer vaginal ring offering sustained release of the protein molecule 5P12-RANTES, a potent experimental chemokine analogue that potently blocks the HIV CCR5 coreceptor. Building on our previous work, here we report the preclinical development of a new combination vaginal ring that offers sustained release of both 5P12-RANTES and dapivirine, in which the 5P12-RANTES is incorporated into an exposed core within the ring body and the dapivirine in the sheath. In this way, in vitro release of dapivirine matches closely that for Ring-004. Also, we report the pharmacokinetic testing of this combination ring formulation in sheep, where vaginal concentrations of both drugs are maintained over 28 days at levels potentially useful for preventing HIV infection in women.

Design of Poly(lactic-co-glycolic Acid) (PLGA) Nanoparticles for Vaginal Co-Delivery of Griffithsin and Dapivirine and Their Synergistic Effect for HIV Prophylaxis.

Long-acting topical products for pre-exposure prophylaxis (PrEP) that combine antiretrovirals (ARVs) inhibiting initial stages of infection are highly promising for prevention of HIV sexual transmission. We fabricated core-shell poly(lactide-co-glycolide) (PLGA) nanoparticles, loaded with two potent ARVs, griffithsin (GRFT) and dapivirine (DPV), having different physicochemical properties and specifically targeting the fusion and reverse transcription steps of HIV replication, as a potential long-acting microbicide product. The nanoparticles were evaluated for particle size and zeta potential, drug release, cytotoxicity, cellular uptake and in vitro bioactivity. PLGA nanoparticles, with diameter around 180-200 nm, successfully encapsulated GRFT (45% of initially added) and DPV (70%). Both drugs showed a biphasic release with initial burst phase followed by a sustained release phase. GRFT and DPV nanoparticles were non-toxic and maintained bioactivity (IC50 values of 0.5 nM and 4.7 nM, respectively) in a cell-based assay. The combination of drugs in both unformulated and encapsulated in nanoparticles showed strong synergistic drug activity at 1:1 ratio of IC50 values. This is the first study to co-deliver a protein (GRFT) and a hydrophobic small molecule (DPV) in PLGA nanoparticles as microbicides. Our findings demonstrate that the combination of GRFT and DPV in nanoparticles is highly potent and possess properties critical to the design of a sustained release microbicide.

Mechanical testing methods for drug-releasing vaginal rings.

Vaginal rings (VRs) are currently marketed for contraceptive or hormone regulation purposes, and investigationally, have been widely reported for delivery of antiretrovirals to reduce HIV transmission. To date, there is no national or international standard for the mechanical testing and minimum performance characteristics of any VR based products. Here, we describe a series of mechanical tests examining the durometer hardness, static and dynamic compression response, tensile properties and twist resistance of vaginal rings. The tests were conducted on currently marketed VRs and a number of the International Partnership for Microbicides' (IPM) investigational VR formulations. With wider application in the field, the tests described herein could form the basis for a more standardised approach to the mechanical testing of VRs.

Packing Polymorphism of Dapivirine and Its Impact on the Performance of a Dapivirine-Releasing Silicone Elastomer Vaginal Ring.

A silicone elastomer vaginal ring providing sustained release over 28 days of the anti-retroviral microbicide dapivirine has recently completed phase III clinical testing and showed moderate protection against HIV acquisition. In support of the product licensure program, we report the impact of dapivirine packing polymorphism on the thermal and solubility characteristics of dapivirine and on the in vitro performance of the 25 mg dapivirine ring product. This is the first time that polymorphism has been reported for a drug-releasing vaginal ring product. Thermal, particle size, powder X-ray diffraction, and thermodynamic solubility analyses of dapivirine polymorphic forms I and IV, both of which are persistent at room temperature and with form I being the thermodynamically stable form, were conducted for both micronized and non-micronized materials. No significant differences in solubility between DPV forms I and IV were observed in media commonly used for in vitro release testing. Matrix-type silicone elastomer vaginal rings were manufactured and the impact of dapivirine polymorphism on key in vitro parameters (compression and tensile behavior; content assay; in vitro release; residual content assay) was investigated. The data demonstrate that dapivirine packing polymorphism has no significant impact on in vitro performance of the 25 mg dapivirine vaginal ring.

Safety and Efficacy of a Dapivirine Vaginal Ring for HIV Prevention in Women.

BACKGROUND: The incidence of human immunodeficiency virus (HIV) infection remains high among women in sub-Saharan Africa. We evaluated the safety and efficacy of extended use of a vaginal ring containing dapivirine for the prevention of HIV infection in 1959 healthy, sexually active women, 18 to 45 years of age, from seven communities in South Africa and Uganda. METHODS: In this randomized, double-blind, placebo-controlled, phase 3 trial, we randomly assigned participants in a 2:1 ratio to receive vaginal rings containing either 25 mg of dapivirine or placebo. Participants inserted the rings themselves every 4 weeks for up to 24 months. The primary efficacy end point was the rate of HIV type 1 (HIV-1) seroconversion. RESULTS: A total of 77 participants in the dapivirine group underwent HIV-1 seroconversion during 1888 person-years of follow-up (4.1 seroconversions per 100 person-years), as compared with 56 in the placebo group who underwent HIV-1 seroconversion during 917 person-years of follow-up (6.1 seroconversions per 100 person-years). The incidence of HIV-1 infection was 31% lower in the dapivirine group than in the placebo group (hazard ratio, 0.69; 95% confidence interval [CI], 0.49 to 0.99; P=0.04). There was no significant difference in efficacy of the dapivirine ring among women older than 21 years of age (hazard ratio for infection, 0.63; 95% CI, 0.41 to 0.97) and those 21 years of age or younger (hazard ratio, 0.85; 95% CI, 0.45 to 1.60; P=0.43 for treatment-by-age interaction). Among participants with HIV-1 infection, nonnucleoside reverse-transcriptase inhibitor resistance mutations were detected in 14 of 77 participants in the dapivirine group (18.2%) and in 9 of 56 (16.1%) in the placebo group. Serious adverse events occurred more often in the dapivirine group (in 38 participants [2.9%]) than in the placebo group (in 6 [0.9%]). However, no clear pattern was identified. CONCLUSIONS: Among women in sub-Saharan Africa, the dapivirine ring was not associated with any safety concerns and was associated with a rate of acquisition of HIV-1 infection that was lower than the rate with placebo. (Funded by the International Partnership for Microbicides; ClinicalTrials.gov number, NCT01539226 .).

Matrix and reservoir-type multipurpose vaginal rings for controlled release of dapivirine and levonorgestrel.

A matrix-type silicone elastomer vaginal ring providing 28-day continuous release of dapivirine (DPV) - a lead candidate human immunodeficiency virus type 1 (HIV-1) microbicide compound - has recently demonstrated moderate levels of protection in two Phase III clinical studies. Here, next-generation matrix and reservoir-type silicone elastomer vaginal rings are reported for the first time offering simultaneous and continuous in vitro release of DPV and the contraceptive progestin levonorgestrel (LNG) over a period of between 60 and 180days. For matrix-type vaginal rings comprising initial drug loadings of 100, 150 or 200mg DPV and 0, 16 or 32mg LNG, Day 1 daily DPV release values were between 4132 and 6113µg while Day 60 values ranged from 284 to 454µg. Daily LNG release ranged from 129 to 684µg on Day 1 and 2-91µg on Day 60. Core-type rings comprising one or two drug-loaded cores provided extended duration of in vitro release out to 180days, and maintained daily drug release rates within much narrower windows (either 75-131µg/day or 37-66µg/day for DPV, and either 96-150µg/day or 37-57µg/day for LNG, depending on core ring configuration and ignoring initial lag release effect for LNG) compared with matrix-type rings. The data support the continued development of these devices as multi-purpose prevention technologies (MPTs) for HIV prevention and long-acting contraception.