Benefits of Nonthermal Atmospheric Plasma Treatment on Dentin Adhesion.

OBJECTIVES:: This study aimed to evaluate the influence of two nonthermal atmospheric plasma (NTAP) application times and two storage times on the microtensile bond strength (µTBS) to dentin. The influence of NTAP on the mechanical properties of the dentin-resin interface was studied by analyzing nanohardness (NH) and Young's modulus (YM). Water contact angles of pretreated dentin and hydroxyapatite blocks were also measured to assess possible alterations in the surface hydrophilicity upon NTAP. METHODS AND MATERIALS:: Forty-eight human molars were used in a split-tooth design (n=8). Midcoronal exposed dentin was flattened by a 600-grit SiC paper. One-half of each dentin surface received phosphoric acid conditioning, while the other half was covered with a metallic barrier and remained unetched. Afterward, NTAP was applied on the entire dentin surface (etched or not) for 10 or 30 seconds. The control groups did not receive NTAP treatment. Scotchbond Universal (SBU; 3M ESPE) and a resin-based composite were applied to dentin following the manufacturer's instructions. After 24 hours of water storage at 37°C, the specimens were sectioned perpendicular to the interface to obtain approximately six specimens or bonded beams (approximately 0.9 mm2 in cross-sectional area) representing the etch-and-rinse (ER) approach and another six specimens representing the self-etch (SE) approach. Half of the µTBS specimens were immediately loaded until failure, while the other half were first stored in deionized water for two years. Three other bonded teeth were selected from each group (n=3) for NH and YM evaluation. Water contact-angle analysis was conducted using a CAM200 (KSV Nima) goniometer. Droplet images of dentin and hydroxyapatite surfaces with or without 10 or 30 seconds of plasma treatment were captured at different water-deposition times (5 to 55 seconds). RESULTS:: Two-way analysis of variance revealed significant differences in µTBS of SBU to dentin after two years of water storage in the SE approach, without differences among treatments. After two years of water aging, the ER control and ER NTAP 10-second groups showed lower µTBS means compared with the ER NTAP 30-second treated group. Nonthermal atmospheric plasma resulted in higher NH and YM for the hybrid layer. The influence of plasma treatment in hydrophilicity was more evident in the hydroxyapatite samples. Dentin hydrophilicity increased slightly after 10 seconds of NTAP, but the difference was higher when the plasma was used for 30 seconds. CONCLUSIONS:: Dentin NTAP treatment for 30 seconds contributed to higher µTBS after two years of water storage in the ER approach, while no difference was observed among treatments in the SE evaluation. This result might be correlated to the increase in nanohardness and Young's modulus of the hybrid layer and to better adhesive infiltration, since dentin hydrophilicity was also improved. Although some effects were observed using NTAP for 10 seconds, the results suggest that 30 seconds is the most indicated treatment time.

Phytotoxicity associated to microcystins: a review / Fitotocixidade associada às microcistinas: uma revisão

Microcystins (MC) are the most studied toxins of cyanobacteria since they are widely distributed and account for several cases of human and animal poisoning, being potent inhibitors of the serine/threonine protein phosphatases 1 (PP1) and 2A (PP2A). The phosphatases PP1 and PP2A are also present in plants, which may also suffer adverse effects due to the inhibition of these enzymes. In aquatic plants, biomass reduction is usually observed after absorption of cyanotoxins, which can bioaccumulate in its tissues. In terrestrial plants, the effects caused by microcystins vary from inhibition to stimulation as the individuals develop from seedling to adult, and include reduction of protein phosphatases 1 and 2A, oxidative stress, decreased photosynthetic activity and even cell apoptosis, as well as bioaccumulation in plant tissues. Thus, the irrigation of crop plants by water contaminated with microcystins is not only an economic problem but becomes a public health issue because of the possibility of food contamination, and this route of exposure requires careful monitoring by the responsible authorities.

Microcistinas (MC) são as toxinas de cianobactérias mais estudadas, uma vez que são amplamente distribuídas e responsáveis por vários casos de intoxicação humana e animal. São potentes inibidoras das proteínas fosfatases serina/treonina 1 (PP1) e 2A (PP2A). As fosfatases PP1 e PP2A também estão presentes em plantas, as quais podem sofrer efeitos adversos devido à inibição dessas enzimas. Em plantas aquáticas, a redução da biomassa é geralmente observada após absorção de cianotoxinas que podem bioacumular em seus tecidos. Em plantas terrestres, os efeitos causados pelas microcistinas variam de inibição ao estímulo, como no desenvolvimento de plântulas ao estádio adulto, e incluem a redução de proteínas fosfatases 1 e 2A, estresse oxidativo, diminuição da atividade fotossintética e até mesmo apoptose celular, bem como a bioacumulação em tecidos de plantas. Assim, a irrigação de plantas cultivadas com água contaminada com microcistina não é apenas um problema econômico, mas torna-se um problema de saúde pública, devido à possibilidade de contaminação dos alimento, sendo uma via de exposição que requer um monitoramento cuidadoso por parte das autoridades responsáveis.