An Electrochemical Perspective on Reaction Acceleration in Droplets.

Analytical techniques operating at the nanoscale introduce confinement as a tool at our disposal. This review delves into the phenomenon of accelerated reactivity within micro- and nanodroplets. A decade of accelerated reactivity observations was succeeded by several years of fundamental studies aimed at mechanistic enlightenment. Herein, we provide a brief historical context for rate enhancement in micro- and nanodroplets and summarize the mechanisms that have been proposed to contribute to such extraordinary reactivity. We highlight recent electrochemical reports that make use of restricted mass transfer to enhance electrochemical reactions and/or quantitatively measure reaction rates within droplet-confined electrochemical cells. A comprehensive approach to nanodroplet reactivity is paramount to understanding how nature takes advantage of these systems to provide life on Earth and, in turn, how to harness the full potential of such systems.

Concentration Enrichment in a Dissolving Microdroplet: Accessing Sub-nanomolar Electroanalysis.

Droplet evaporation has previously been used as a concentration enrichment strategy; however, the measurement technique of choice requires quantification in rather large volumes. Electrochemistry has recently emerged as a method to robustly probe volumes even down to the attoliter (10-18 L) level. We present a concentration enrichment strategy based on the dissolution of a microdroplet placed on the surface of a Au ultramicroelectrode (radius ∼ 6.25 µm). By precisely positioning a 1,2-dichloroethane microdroplet onto the ultramicroelectrode with a microinjector, we are able to track the droplet's behavior optically and electrochemically. Because the droplet spontaneously dissolves over time, given the relative solubility of 1,2-dichloroethane in the water continuous phase, the change in volume with time enriches the concentration of the redox probe (Cp2*(Fe)II) in the droplet. We demonstrate robust electrochemical detection down to sub-nM (800 pM) concentrations of Cp2*(Fe)II. For this droplet, 800 pM constitutes only about 106 molecules. We extend the strategy in a single-blind study to determine unknown concentrations, emphasizing the promise of the new methodology. These results take voltammetric quantification easily to the sub-µM regime.

Considerations for dual barrel electrode fabrication and experimentation.

New electrochemical probes offer the opportunity to investigate new systems. A dual barrel electrode can be laser pulled to produce micron-sized platinum disk electrodes. Here, we detail several important considerations for both the fabrication process and for experimental implimentation of the probe. We provide parameters for a Sutter P-2000 laser puller, methods for optical and electrochemical characterization, tips for how to successfully bevel the microelectrodes, and how salt concentrations and electrostatic discharge affect the voltammetry. This paper serves as a guide for how to successfully implement dual barrel electrodes from fabrication to experimentation.

Direct electrochemical evidence suggests that aqueous microdroplets spontaneously produce hydrogen peroxide.

Recent reports have detailed the striking observation that electroactive molecules, such as hydrogen peroxide (H2O2) and radical water species (H2O.+/H2O.-), are spontaneously produced in aqueous microdroplets. Stochastic electrochemistry allows one to study reactions in real-time occurring inside subfemtoliter droplets, one droplet at a time, when a microdroplet irreversibly adsorbs to an ultramicroelectrode surface (radius ~ 5 µm). Here, we use stochastic electrochemistry to probe the formation of hydrogen peroxide (H2O2) in single aqueous microdroplets suspended in 1,2-dichloroethane. The oxidation of H2O2 at alkaline pH (11.5) differs from near-neutral conditions (6.4), allowing us to create a digital, turn-off sensing modality for the presence of H2O2. Further, we show that the stochastic electrochemical signal is highest at the mass transfer limitation of the H2O2 couple and is dampened when the potential nears the formal potential. We validate these results by showing that the addition of a H2O2 selective probe, luminol, decreases the stochastic electrochemical response at alkaline pH (11.5). Our results support the observation that H2O2 is generated in water microdroplets at concentrations of ~100 s of µM.

Levitating Droplet Electroanalysis.

Chemical reactions that occur in droplets proceed much differently compared to bulk phases. For instance, many groups have studied droplets during levitation by mass spectrometry and fluorescence to gain more detailed mechanistic insight. Such droplets maximize the probability of solution species interacting with the solution-air interface, an interface that is inherently difficult to probe electrochemically. In this Technical Note, we overcome this limitation by developing a laser-pulled dual-barrel electrode. Having two microwires sealed within the same glass capillary allows one to make two-electrode measurements. We show that the electrode can be positioned within a levitating water droplet and that the voltammetry of a redox indicator (hexacyanoferrate (II/III)) can be observed in real-time. Such foundational measurement tools are important to probe a variety of chemical reactions at complex interfaces.

Single Liquid Aerosol Microparticle Electrochemistry on a Suspended Ionic Liquid Film.

Liquid aerosols are ubiquitous in nature, and several tools exist to quantify their physicochemical properties. As a measurement science technique, electrochemistry has not played a large role in aerosol analysis because electrochemistry in air is rather difficult. Here, a remarkably simple method is demonstrated to capture and electroanalyze single liquid aerosol particles with radii on the order of single micrometers. An electrochemical cell is constructed by a microwire (cylindrical working electrode) traversing a film of ionic liquid (1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide) that is suspended within a wire loop (reference/counter electrode). An ionic liquid is chosen because the low vapor pressure preserves the film over weeks, vastly improving suspended film electroanalysis. The resultant high surface area allows the suspended ionic liquid cell to act as an aerosol net. Given the hydrophobic nature of the ionic liquid, aqueous aerosol particles do not coalesce into the film. When the liquid aerosols collide with the sufficiently biased microwire (creating a complex boundary: aerosol|wire|ionic liquid|air), the electrochemistry within a single liquid aerosol particle can be interrogated in real-time. The ability to achieve liquid aerosol size distributions for aerosols over 1 µm in radius is demonstrated.

Femtoliter oil droplets act as CO2 micropumps for uninterrupted electrochemiluminescence at the water|oil interface.

Interfacial effects are well-known to significantly alter chemical reactivity, especially in confined environments, where the surface to volume ratio increases. Here, we observed an inhomogeneity in the electrogenerated chemiluminescence (ECL) intensity decrease over time in a multiphasic system composed of femtoliter water droplets entrapping femtoliter volumes of the 1,2-dichloroethane (DCE) continuous phase. In usual electrochemiluminescence (ECL) reactions involving an ECL chromophore and oxalate ([C2O4]2-), the build-up of CO2 diminishes the ECL signal with time because of bubble formation. We hypothesised that relative solubilities of chemical species in these environments play a dramatic role in interfacial reactivity. Water droplets, loaded with the ECL luminophore [Ru(bpy)3]2+ and the coreactant [C2O4]2- were allowed to stochastically collide and adsorb at the surface of a glassy carbon macroelectrode. When water droplets coalesce on the surface, they leave behind femtoliter droplets of the DCE phase (inclusions). We report the surprising finding that the addition of multiple interfaces, due to the presence of continuous phase's femtoliter inclusions, allows sustained ECL over time after successive potential applications at the triple-phase boundary between water droplet|electrode|DCE inclusion. When femtoliter droplets of DCE form on the electrode surface, bright rings of ECL are observed during the simultaneous oxidation of [Ru(bpy)3]2+ and [C2O4]2-. Control experiments and finite element modelling allowed us to propose that these rings arise because CO2 that is generated near the 1,2-dichloroethane droplet partitions in due to relative solubility of CO2 in 1,2-dichloroethane and builds up and/or is expelled at the top of the droplet. The small droplets of the DCE phase act as micropumps, pumping away carbon dioxide from the interface. These results highlight the unexpected point that confined microenvironments and their geometry can tune chemical reactions of industrial importance and fundamental interest.

For Zinc Metal Batteries, How Many Electrons go to Hydrogen Evolution? An Electrochemical Mass Spectrometry Study.

Despite the advantages of aqueous zinc (Zn) metal batteries (AZMB) like high specific capacity (820 mAh g-1 and 5,854 mAh cm-3 ), low redox potential (-0.76 V vs. the standard hydrogen electrode), low cost, water compatibility, and safety, the development of practically relevant batteries is plagued by several issues like unwanted hydrogen evolution reaction (HER), corrosion of Zn substrate (insulating ZnO, Zn(OH)2 , Zn(SO4 )x (OH)y , Zn(ClO4 )x (OH)y etc. passivation layer), and dendrite growth. Controlling and suppressing HER activity strongly correlates with the long-term cyclability of AZMBs. Therefore, a precise quantitative technique is needed to monitor the real-time dynamics of hydrogen evolution during Zn electrodeposition. In this study, we quantify hydrogen evolution using in situ electrochemical mass spectrometry (ECMS). This methodology enables us to determine a correction factor for the faradaic efficiency of this system with unmatched precision. For instance, during the electrodeposition of zinc on a copper substrate at a current density of 1.5 mA/cm2 for 600 seconds, 0.3 % of the total charge is attributed to HER, while the rest contributes to zinc electrodeposition. At first glance, this may seem like a small fraction, but it can be detrimental to the long-term cycling performance of AZMBs. Furthermore, our results provide insights into the correlation between HER and the porous morphology of the electrodeposited zinc, unravelling the presence of trapped H2 and Zn corrosion during the charging process. Overall, this study sets a platform to accurately determine the faradaic efficiency of Zn electrodeposition and provides a powerful tool for evaluating electrolyte additives, salts, and electrode modifications aimed at enhancing long-term stability and suppressing the HER in aqueous Zn batteries.

Through-Space Electrochemiluminescence Reveals Bubble Forces at Remote Phase Boundaries.

Several groups have reported on the curious chemistry and reaction acceleration in confined volumes. These complex multiphase systems most closely resemble natural processes, and new measurement tools are necessary to probe chemistry in such environments. Generally, electrochemiluminescence (ECL) reports on processes immediately near (within a few micrometers) the electrode surface. Here, we introduce through-space ECL, reporting on dynamics of processes far away (100s of µm) from the electrode surface. We achieved this by collecting reflected ECL light. During the heterogeneous oxidation of C2O42- in an aqueous phase adjacent to a 1,2-dichlorethane droplet, CO2 accumulates in the 1,2-dichloroethane droplet. Upon buildup, we demonstrate that a CO2 bubble forms in the nonaqueous phase and is surprisingly trapped at the water|1,2-dichloroethane interface and continues to grow. The co-oxidation of tris(bipyridine)ruthenium(II) in the aqueous phase lights up the electrode surface and reflects off the edges of the bubble, revealing the bubble growth over time even when the bubble is fractions of a millimeter from the surface. We extend our results to quantifying bubble forces at the water-oil interface at remote distances from the electrode surface.

PFAS Electroanalysis in Low-Oxygen River Water Using Electrogenerated Dioxygen.

Per- and polyfluoroalkyl substances (PFAS), nicknamed "forever chemicals" due to the strength of their carbon-fluorine bonds, are a class of potent micropollutants that cause deleterious health effects in mammals. The current state-of-the-art detection method requires the collection and transport of water samples to a centralized facility where chromatography and mass spectrometry are performed for the separation, identification, and quantification of PFAS. However, for efficient remediation efforts to be properly informed, a more rapid in-field testing method is required. We previously demonstrated the development and use of dioxygen as the mediator molecule. The use of dioxygen is predicated on the assumption that there will be consistent ambient dioxygen levels in natural waters. This is not always the case in hypoxic groundwater and at high altitudes. To overcome this challenge and further advance the strategies that will enable in-field electroanalysis of PFAS, we demonstrate, as a proof of concept, that dioxygen can be generated in solution through the hydrolysis of water. The electrogenerated dioxygen can then be used as a mediator molecule for the indirect detection of PFOS via molecularly imprinted polymer (MIP)-based electroanalysis. We demonstrate that calibration curves can be constructed with high precision and sensitivity (LOD < 1 ppt or 1 ng/L). Our results provide a foundation for enabling in-field hypoxic PFAS electroanalysis.

Measuring Liquid-into-Liquid Diffusion Coefficients by Dissolving Microdroplet Electroanalysis.

Diffusion is a fundamental process in various domains, such as pollution control, drug delivery, and isotope separation. Accurately measuring the diffusion coefficients (D) of one liquid into another often encounters challenges stemming from intermolecular interactions, precise observations at the liquid interface, convection, etc. Here, we present an innovative electrochemical methodology for determining the diffusion coefficient of a liquid into another liquid. The method involves precisely tracking the lifetime of a nonaqueous droplet. An organic droplet is placed on an ultramicroelectrode surrounded by an aqueous solution of potassium hexacyanoferrate(II/III). The droplet initially blocks the reduction or oxidation of the redox species. As the droplet dissolves, giving access to the conductive microelectrode surface, a continuously increasing current is observed in voltammetry and the amperometric i-t response. The electrochemical response thus directly reports on the flux of redox species on the electrode surface, allowing us to precisely determine the lifetime of the droplet. D values are directly determined through a combination of electrochemical analysis and the principles of droplet dissolution. We demonstrate the quantification of 1,2-dichloroethane and nitrobenzene into water, yielding diffusion coefficients of (11.3 ± 1.2) × 10-6 cm2/s and (5.2 ± 1.1) × 10-6 cm2/s, respectively. This work establishes a reliable electrochemical approach for quantifying diffusion coefficients based on droplet lifetime analysis.

Multiphase Chemistry under Nanoconfinement: An Electrochemical Perspective.

Most relevant systems of interest to modern chemists rarely consist of a single phase. Real-world problems that require a rigorous understanding of chemical reactivity in multiple phases include the development of wearable and implantable biosensors, efficient fuel cells, single cell metabolic characterization techniques, and solar energy conversion devices. Within all of these systems, confinement effects at the nanoscale influence the chemical reaction coordinate. Thus, a fundamental understanding of the nanoconfinement effects of chemistry in multiphase environments is paramount. Electrochemistry is inherently a multiphase measurement tool reporting on a charged species traversing a phase boundary. Over the past 50 years, electrochemistry has witnessed astounding growth. Subpicoampere current measurements are routine, as is the study of single molecules and nanoparticles. This Perspective focuses on three nanoelectrochemical techniques to study multiphase chemistry under nanoconfinement: stochastic collision electrochemistry, single nanodroplet electrochemistry, and nanopore electrochemistry.

Phase-Resolved Electrochemiluminescence with a Single Luminophore.

Multiphase chemical systems are greatly different than bulk solutions, as they provide a unique environment for reactions to proceed and have unique physicochemical properties. Thus, new tools need to be developed to gain a more detailed understanding of these systems. Here, we use electrogenerated chemiluminescence (ECL) to elucidate phase boundaries precisely and comprehensively between aqueous droplets and an organic continuous phase owing to ECL's unprecedented spatial resolution (a few micrometers) confined at the electrode surface. Phase-resolved mapping was accomplished by selecting a luminophore that is soluble in both phases while selecting two coreactants that are exclusively soluble in one phase or the other. This type of system allows us to map the complex liquid|electrode and the liquid|liquid interfaces in a multiphase system. We show that electrical connectivity is not conserved throughout solvent inclusions, which result from neighboring droplet coalescence, indicating an unexpected initial lack of electronic communication. These results have great importance to energy storage and conversion devices and wearable/implantable sensors, which are dominated by complex, multiphase environments.

chem16S: community-level chemical metrics for exploring genomic adaptation to environments.

SUMMARY: The chem16S package combines taxonomic classifications of 16S rRNA gene sequences with amino acid compositions of prokaryotic reference proteomes to generate community reference proteomes. Taxonomic classifications from the RDP Classifier or data objects created by the phyloseq R package are supported. Users can calculate and visualize a variety of chemical metrics in order to explore the effects of redox, salinity, and other physicochemical variables on the genomic adaptation of protein sequences at the community level. AVAILABILITY AND IMPLEMENTATION: Development of chem16S is hosted at https://github.com/jedick/chem16S. Version 1.0.0 is freely available from the Comprehensive R Archive Network (CRAN) at https://cran.r-project.org/package=chem16S.

An Electrochemical Perspective on the Interfacial Width between Two Immiscible Liquid Phases.

Molecular dynamics simulations and vibrational sum-frequency spectroscopy are historically the main techniques applied to the description of the molecular structure and dynamics of the immiscible liquid/liquid interface. A molecular sharpness is estimated for oil/water interfaces, with an interfacial width that extends from hundreds of Å to 1 nm. However, electrochemical studies have elucidated a deeper liquid/liquid interface on the order of several micrometers. The breaking down of single-entity electrochemistry to simpler systems and the combination of high-resolution microscopies is confirming a larger extension of the interface. What can be the role of the electrochemist in clarifying this fundamental question? We try to give a suggestion at the end of a brief historical overview of the liquid/liquid interface studies.

Voltage-driven ion flux promotes emulsification at the water|oil interface.

Emulsions are critical across a vast range of industries. Generally, emulsion synthesis is a complicated chemical process, requiring many mixed-phase systems. Here, we demonstrate that the flux of ions across the oil|water interface induces emulsification. Ion flux is achieved by a voltage-driven process, where an anode and a cathode are placed in each phase. When a current density of 2 mA cm-2 is reached across the interface, emulsification occurs. We demonstrate that emulsification can be tuned to occur in both phases, depending on the ions present. Droplet sizes are on the order of hundreds of nm and are stable for over an hour even without purposefully added surfactant. We demonstrate qualitative control over droplet size and charge based on salt content, current densities, and polarity of the interface. The process is 1000 times less energetic than ultrasonication. Our results introduce a robust and low-energy means of nanodroplet dispersion without the use of more than two phases and complex phase-transfer agents.

Correction: Abiotic microcompartments form when neighbouring droplets fuse: an electrochemiluminescence investigation.

[This corrects the article DOI: 10.1039/D2SC06553C.].

Community- and genome-based evidence for a shaping influence of redox potential on bacterial protein evolution.

Despite deep interest in how environments shape microbial communities, whether redox conditions influence the sequence composition of genomes is not well known. We predicted that the carbon oxidation state (ZC) of protein sequences would be positively correlated with redox potential (Eh). To test this prediction, we used taxonomic classifications for 68 publicly available 16S rRNA gene sequence data sets to estimate the abundances of archaeal and bacterial genomes in river & seawater, lake & pond, geothermal, hyperalkaline, groundwater, sediment, and soil environments. Locally, ZC of community reference proteomes (i.e., all the protein sequences in each genome, weighted by taxonomic abundances but not by protein abundances) is positively correlated with Eh corrected to pH 7 (Eh7) for the majority of data sets for bacterial communities in each type of environment, and global-scale correlations are positive for bacterial communities in all environments. In contrast, archaeal communities show approximately equal frequencies of positive and negative correlations in individual data sets, and a positive pan-environmental correlation for archaea only emerges after limiting the analysis to samples with reported oxygen concentrations. These results provide empirical evidence that geochemistry modulates genome evolution and may have distinct effects on bacteria and archaea. IMPORTANCE The identification of environmental factors that influence the elemental composition of proteins has implications for understanding microbial evolution and biogeography. Millions of years of genome evolution may provide a route for protein sequences to attain incomplete equilibrium with their chemical environment. We developed new tests of this chemical adaptation hypothesis by analyzing trends of the carbon oxidation state of community reference proteomes for microbial communities in local- and global-scale redox gradients. The results provide evidence for widespread environmental shaping of the elemental composition of protein sequences at the community level and establish a rationale for using thermodynamic models as a window into geochemical effects on microbial community assembly and evolution.