RESUMO
PURPOSE: To investigate the effects of the elemental composition and the manufacturing process of cobalt chromium-molybdenum (CoCr-Mo), cobalt chromium-tungsten (CoCr-W), and CoCr-Mo-W alloys on metal-ceramic bond strength. MATERIALS AND METHODS: Six CoCr-based alloys were included in this study, a were classified into three different groups depending on their elemental composition (Ν = 10, for each group). The first group had molybdenum (Mo) as the third alloying element, the second group contained tungsten (W) (without Mo), and the third group included both alloying elements. The groups were further divided by the manufacturing process (casting or selective laser melting, SLM). Interfacial analysis was carried out using backscattered electron imaging (BEI) and energy-dispersive X-ray microanalysis (EDX) operating in line scan mode. The metal-ceramic bond strength was tested by a 3-point bending test according to the ISO 9693 requirements. The fracture mode of all specimens was examined under a stereomicroscope. The bond strength results were statistically analyzed by 2-way ANOVA and Tukey's multiple comparison post hoc test (a = 0.05). RESULTS: A continuous interface with the porcelain was found without pores, debonding areas, or other defects. Of the major elements found at the interface, Co showed the highest diffusion rate, while titanium (Ti) had the lowest diffusion rate. No statistically significant differences were identified in metal-ceramic bond strength either among materials or between manufacturing processes. The fracture mode was found to be cohesive for all specimens. CONCLUSIONS: The metal-ceramic bond strength is independent of the current CoCr alloy type and manufacturing process when comparing conventional casting and SLM. Interfacial analysis revealed no differences between the tested groups.
RESUMO
OBJECTIVES: Hepatitis B reactivation (HBVr) constitutes a side effect of the treatment of autoimmune rheumatic diseases. Even though HBVr risk of conventional synthetic disease modifying anti-rheumatic drugs (csDMARDs) and anti-tumor necrosis factor (anti-TNF) agents has long been established, the risk of targeted synthetic (ts)DMARDs and anti-interleukin (anti-IL) agents remains largely unknown. METHODS: We conducted a SLR (PubMed, Scopus and EMBASE) and metanalysis to examine the HBVr risk for the following: anti-IL17, anti-IL12/23, anti-IL23 and JAK-inhibitors in patients with chronic HBV infection (HBsAg presence or detectable HBV-DNA) and in patients with prior HBV infection (HBcAb-positive and HBsAg-negative). Meta-analysis was performed using both the fixed and random effects method and was conducted using the R computing language. RESULTS: Overall, our study revealed a low HBVr risk of < 6% in all agents; the risk was significantly higher for people having chronic compared with those with resolved HBV (14,4% vs 5.1%, respectively p< 0.01). There was no difference among different drugs in the HBVr rates [anti-IL-17: 4% (95% CI: 1-9%), anti-IL-12/IL-23: 2% (95% CI: 0-5%), JAK-inhibitors: 4% (95% CI: 1-8%), anti-IL23: 0%]. Of note, HBVr rate reached 28% in patients with chronic HBV who did not receive anti-viral treatment. For patients with resolved hepatitis the respective percentage was 4.7%. CONCLUSION: Overall, our meta-analysis shows that patients with chronic HBV receiving anti-IL-17, anti-IL-12/23, anti-IL-23 and JAK-inhibitors have significant risk for HBVr, especially if they are not under anti-viral treatment. In contrast, resolved HBV seems to offer minor risk for HBVr even without anti-viral treatment.
RESUMO
BACKGROUND: Several single-center studies proposed utility of vagus nerve (VN) ultrasound for detecting disease severity, autonomic dysfunction, and bulbar phenotype in amyotrophic lateral sclerosis (ALS). However, the resulting body of literature shows opposing results, leaving considerable uncertainty on the clinical benefits of VN ultrasound in ALS. METHODS: Relevant studies were identified up to 04/2024 and individual patient data (IPD) obtained from the respective authors were pooled with a so far unpublished cohort (from Munich). An IPD meta-analysis of 109 patients with probable or definite ALS (El Escorial criteria) and available VN cross-sectional area (CSA) was performed, with age, sex, ALS Functional Rating Scale-revised (ALSFRS-R), disease duration, and bulbar phenotype as independent variables. RESULTS: Mean age was 65 years (± 12) and 47% of patients (± 12) had bulbar ALS. Mean ALSFRS-R was 38 (± 7), and mean duration was 18 months (± 18). VN atrophy was highly prevalent [left: 67% (± 5), mean CSA 1.6mm2 (± 0.6); right: 78% (± 21), mean CSA 1.8 mm2 (± 0.7)]. VN CSA correlated with disease duration (mean slope: left - 0.01; right - 0.01), but not with ALSFRS-R (mean slope: left 0.004; mean slope: right - 0.002). Test accuracy for phenotyping bulbar vs. non-bulbar ALS was poor (summary receiver operating characteristic area under the curve: left 0.496; right 0.572). CONCLUSION: VN atrophy in ALS is highly prevalent and correlates with disease duration, but not with ALSFRS-R. VN CSA is insufficient to differentiate bulbar from non-bulbar ALS phenotypes. Further studies are warranted to analyze the link between VN atrophy, autonomic impairment, and survival in ALS.
RESUMO
Meropenem penetration into the cerebrospinal fluid (CSF) is subject to high interindividual variability resulting in uncertain target attainment in CSF. Recently, several authors recommended administering meropenem as a continuous infusion (CI) to optimize CSF exposure. This study aimed to compare the concentrations and pharmacokinetics of meropenem in CSF after intermittent infusion (II) and CI. This prospective, observational study (NCT04426383) included critically ill patients with external ventricular drains who received either II or CI of meropenem. Meropenem pharmacokinetics in plasma and CSF were characterized using population pharmacokinetic modeling (NONMEM 7.5). The developed model was used to compare the concentration-time profile and probability of target attainment (PTA) between II and CI. A total of 16 patients (8 CI, 8 II; samples: nplasma = 243, nCSF = 263) were recruited, with nine patients (5 CI, 4 II) suffering from cerebral and seven patients from extracerebral infections. A one-compartment model described the plasma concentrations adequately. Meropenem penetration into the CSF (partition coefficient (KP), cCSF/cplasma) was generally low (6.0%), exhibiting substantial between-subject variability (coefficient of variation: 84.0%). There was no correlation between the infusion mode and KP, but interleukin (IL)-6 measured in CSF showed a strong positive correlation with KP (P < 0.001). Dosing simulations revealed no relevant differences in CSF concentrations and PTA in CSF between CI and II. Our study did not demonstrate increased penetration rates or higher concentrations of meropenem in the CSF with CI compared with II. CLINICAL TRIALS: This study is registered with ClinicalTrials.gov as NCT04426383.
RESUMO
STATEMENT OF PROBLEM: Three Co-Cr alloy types (Co-Cr-Mo, Co-Cr-W, and Co-Cr-Mo-W) have been commonly used in the fabrication of dental prostheses. These alloys can be manufactured using either conventional casting or selective laser melting (SLM) techniques. Nevertheless, research that directly compares these materials and/or manufacturing processes in terms of their microstructural and mechanical characteristics is sparse. PURPOSE: The purpose of this in vitro study was to conduct microstructural and mechanical analysis via X-ray interpretation, optical microscopy, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS), image analysis, X-ray diffraction (XRD), instrumented indentation testing (IIT), and 3-point bending testing to characterize Co-Cr-Mo, Co-Cr-W, and Co-Cr-Mo-W alloys produced through conventional casting and SLM. MATERIAL AND METHODS: Six Co-Cr-based alloys were analyzed and divided into 3 types based on their elemental composition (Co-Cr-Mo, Co-Cr-W, and Co-Cr-Mo-W). Additionally, each group was categorized based on the manufacturing process used (casting or SLM). X-ray scans were used to assess porosity. The microstructures of the specimens were assessed through SEM/EDS examination and XRD analysis. IIT was used to determine the Martens hardness (HM) and elastic index (ηIT), while the elastic modulus (E) was estimated through the 3-point bending test. The mechanical properties were statistically analyzed using 2-way analysis of variance (ANOVA) and the Tukey multiple comparison post hoc test, with alloy type and manufacturing process as discriminating variables (α=.05). RESULTS: All cast groups exhibited gross porosity, while no pores or other flaws were found in the SLM groups. Based on the XRD results, the crystalline structure of all Co-Cr specimens consisted of the face-centered cubic γ phase (γ-fcc), along with the hexagonal close-packed ε phase (ε-hcp) and Cr23C6 carbide. Different microstructures were identified between the cast and SLM alloys. Significant differences were identified for the mean standard deviation HM (ranging from 2601 ±94 N/mm2 to 3633 ±61 N/mm2) and mean ±standard deviation ηIT (ranging from 16.8 ±0.3% to 20.9 ±0.3%) among alloys prepared by the same manufacturing process, while all SLM alloys had statistically higher HM and ηIT results than their cast counterparts (P<.05). No statistically significant differences were identified for the mean ±standard deviation Eb (ranging from 170 ±25 GPa to 244 ±36 GPa) among the groups prepared with the same manufacturing process (P>.05), but the SLM alloys had significantly higher results (P<.05) than the cast alloys. CONCLUSIONS: In general, the manufacturing procedure significantly affected the porosity, microstructure, and mechanical properties of the tested Co-Cr alloys. SLM decreased the internal porosity, provided a uniform microstructure, and improved the mechanical properties for all the tested alloy types.
RESUMO
Introduction: Akinetic mutism is a severe state of impaired volition that can result from a stroke. Its therapeutic evidence relies on single case reports that used atomoxetine or levodopa with variable latency and efficacy. Case Presentation: We present the case of a 54-year-old woman who developed akinetic mutism after infarction in the territory of the right anterior cerebral artery, successfully treated with methylphenidate and levodopa/benserazide. Clinical examination showed a patient lacking any spontaneous speech and movement while opening her eyes and fixating. Suspecting akinetic mutism after a comprehensive diagnostic work-up, we started an individual therapy attempt with methylphenidate 10 mg and levodopa/benserazide 100/25 mg twice daily. Both drugs affect the dopaminergic and noradrenergic transmission in the frontal-subcortical circuit, compromised in akinetic mutism. We saw rapid and sustained improvement in her volitional actions, devoid of side effects. Finally, the patient was actively communicating and moving her limbs. Conclusion: We discuss the patient's favorable clinical course in response to the synergistic combination of methylphenidate and levodopa/benserazide, emerging as a promising treatment strategy, and provide a brief literature review of treatment options in akinetic mutism following stroke.
RESUMO
BACKGROUND: Postoperative delirium (POD) is the most common complication following surgery in elderly patients. During pharmacist-led medication reconciliation (PhMR), a predictive risk score considering delirium risk-increasing drugs and other available risk factors could help to identify risk patients. METHODS: Orthopaedic and trauma surgery patients aged ≥ 18 years with PhMR were included in a retrospective observational single-centre study 03/2022-10/2022. The study cohort was randomly split into a development and a validation cohort (6:4 ratio). POD was assessed through the 4 A's test (4AT), delirium diagnosis, and chart review. Potential risk factors available at PhMR were tested via univariable analysis. Significant variables were added to a multivariable logistic regression model. Based on the regression coefficients, a risk score for POD including delirium risk-increasing drugs (DRD score) was established. RESULTS: POD occurred in 42/328 (12.8%) and 30/218 (13.8%) patients in the development and validation cohorts, respectively. Of the seven evaluated risk factors, four were ultimately tested in a multivariable logistic regression model. The final DRD score included age (66-75 years, 2 points; > 75 years, 3 points), renal impairment (eGFR < 60 ml/min/1.73m2, 1 point), anticholinergic burden (ACB-score ≥ 3, 1 point), and delirium risk-increasing drugs (n ≥ 2; 2 points). Patients with ≥ 4 points were classified as having a high risk for POD. The areas under the receiver operating characteristic curve of the risk score model were 0.89 and 0.81 for the development and the validation cohorts, respectively. CONCLUSION: The DRD score is a predictive risk score assessable during PhMR and can identify patients at risk for POD. Specific preventive measures concerning drug therapy safety and non-pharmacological actions should be implemented for identified risk patients.
Assuntos
Delírio do Despertar , Procedimentos Ortopédicos , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Cirurgia de Cuidados Críticos , Reconciliação de Medicamentos/métodos , Procedimentos Ortopédicos/efeitos adversos , Procedimentos Ortopédicos/métodos , Estudos Retrospectivos , Medição de Risco/métodos , Fatores de Risco , Ferimentos e Lesões/cirurgia , Delírio do Despertar/diagnóstico , Delírio do Despertar/prevenção & controleRESUMO
Objective: Endovascular thrombectomy (EVT) is the standard of care for acute large vessel occlusion stroke. Recently, the ANGEL-ASPECT and SELECT 2 trials showed improved outcomes in patients with acute ischemic Stroke presenting with large infarcts. The cost-effectiveness of EVT for this subpopulation of stroke patients has only been calculated using data from the previously published RESCUE-Japan LIMIT trial. It is, therefore, limited in its generalizability to an international population. With this study we primarily simulated patient-level costs to analyze the economic potential of EVT for patients with large ischemic stroke from a public health payer perspective based on the recently published data and secondarily identified determinants of cost-effectiveness. Methods: Costs and outcome of patients treated with EVT or only with the best medical care based on the recent prospective clinical trials ANGEL-ASPECT, SELECT2 and RESCUE-Japan LIMIT. A A Markov model was developed using treamtment outcomes derived from the most recent available literature. Deterministic and probabilistic sensitivity analyses addressed uncertainty. Results: Endovascular treatment resulted in an incremental gain of 1.32 QALYs per procedure with cost savings of $17,318 per patient. Lifetime costs resulted to be most sensitive to the costs of the endovascular procedure. Conclusion: EVT is a cost-saving (i.e., dominant) strategy for patients presenting with large ischemic cores defined by inclusion criteria of the recently published ANGEL-ASPECT, SELECT2, and RESCUE-Japan LIMIT trials in comparison to best medical care in our simulation. Prospective data of individual patients need to be collected to validate these results.
RESUMO
This study aimed at examining the bond strength between zirconia and ceramic veneer, following the ISO 9693 guidelines. A total of fifty specimens of zirconia/ceramic-veneer system were produced using two commercial zirconias (VITA YZ-HTWhite and Zolid HT+ White, referred to as Group A and Group B, respectively) and a ceramic-veneering material (Zirkonia 750). The microstructure (via x-ray diffraction analysis, XRD and Secondary Electron mode, SEM) and the mechanical properties (via 3-point bending tests) of the two groups were assessed. Then, experiments were conducted according to the ISO 9693 and conventional protocols applied for producing zirconia/ceramic-veneer restorations. Bond strength values, measured by 3-point bending tests, were 34.42 ± 7.60 MPa for Group A and 31.92 ± 6.95 MPa for Group B. SEM observations of the cohesively fractured surfaces (on the porcelain side) and the examination for normality using the Shapiro-Wilk test suggested the use of Weibull statistical analysis. Median strength (σ50%) for Group A and Group B was 34.76 and 32.22 MPa, while the characteristic strength (σ63.2%) was 35.78 and 33.14 MPa, respectively. The Weibull modulus disparity between groups (12.69 and 13.07) was not significant. Bond strength exceeded the ISO 9693 minimum of 20 MPa, suggesting satisfactory strength for clinical use.
Assuntos
Colagem Dentária , Porcelana Dentária , Análise do Estresse Dentário , Facetas Dentárias , Teste de Materiais , Microscopia Eletrônica de Varredura , Difração de Raios X , Zircônio , Zircônio/química , Porcelana Dentária/química , Propriedades de Superfície , Cerâmica/química , Materiais Dentários/química , HumanosRESUMO
OBJECTIVE: The accurate documentation of a medical history interview is an important goal in medical education. As students' documentation of medical history interviews is mostly decentralised on the wards, a systematic assessment of documentation quality is missing. We therefore evaluated the extent of details missed in students' medical history reports in a standardised setting. METHODS: In this prospective, observational study, 123 of 380 students (32.4%) participated in an Objective Structured Clinical Examination (OSCE) regarding history taking and documentation. Based on the interviews and nine deductively selected main categories, a categorical system was established using a summarising qualitative content analysis. The items in the transcripts (defined as ground truth) and in students' reports were labelled and assigned to the correct subcategory. The ground truth and students' reports were compared to quantify students' documentation completeness. RESULTS: Next to the nine deductively selected main categories, 61 subcategories were defined. A total of 8943 items were labelled in the 123 interview transcripts (ground truth), compared with 5870 items labelled in students' reports (65.6% completeness of students' reports compared with ground truth). The main category personal details overlapped with 94.2% between students' report and ground truth in contrast to the main category with the highest discrepancy, allergy, with 41.1% overlap. Pertinent negative items and non-numerical quantifications were often missed. CONCLUSIONS: Medical students show incomplete documentation of medical history interviews. Therefore, accurate documentation should be taught as an important goal in medical education.
Assuntos
Documentação , Anamnese , Estudantes de Medicina , Humanos , Estudantes de Medicina/psicologia , Anamnese/normas , Documentação/normas , Estudos Prospectivos , Masculino , Feminino , Educação de Graduação em Medicina , Competência Clínica , Entrevistas como AssuntoRESUMO
Introduction: Aneurysmal subarachnoid hemorrhage (aSAH) often necessitates prolonged sedation to manage elevated intracranial pressure (ICP) and to prevent secondary brain injury. Optimal timing and biomarkers for predicting adverse events (AEs) during interruption of sedation (IS) after prolonged sedation are not well established. To guide sedation management in aSAH, we aimed to explore the frequency, risk factors, and outcomes of IS in aSAH. Methods: In a retrospective cohort study, a total of 148 patients with aSAH from January 2015 to April 2020 were screened. In total, 30 patients accounting for 42 IS were included in the analysis. Adverse events (AEs) during IS were used as core outcome measures and were categorized into neurological and non-neurological AEs. Baseline characteristics, clinical parameters before IS, AEs, and functional outcomes were collected using health records. Statistical analysis used generalized linear mixed-effects models with regularization to identify candidate predictors with subsequent bootstrapping to test model stability. As an exploratory analysis, multivariate linear and logistic regression was used to analyze the association between IS and intensive care unit length of stay, duration of mechanical ventilation, and functional outcomes. Results: The mean age was 56.9 (SD 14.8) years, and a majority of the patients presented with poor-grade SAH (16/30, 53.3%). Neurological and non-neurological AEs occurred in 60.0% (18/30) of the patients. Timing, number of IS attempts, ICP burden, craniectomy status, level of consciousness, heart rate, cerebral perfusion pressure, oxygen saturation, fraction of inspired oxygen, and temperature were selected as candidate predictors. Through bootstrapping, elapsed time since disease onset (OR 0.85, 95% confidence interval (95% CI) 0.75-0.97), ICP burden (OR 1.24, 95% CI 1.02-1.52), craniectomy (OR 0.68, 95% CI 0.48-0.69), and oxygen saturation (OR, 0.80 0.72-0.89) were revealed as relevant biomarkers for neurological AEs, while none of the pre-selected predictors was robustly associated with non-neurological AEs. Conclusion: In aSAH, complications during the definite withdrawal of sedation are frequent but can potentially be predicted using clinical parameters available at the bedside. Prospective multicenter studies are essential to validate these results and further investigate the impact of IS complications.
RESUMO
PURPOSE: The Harlequin syndrome may occur in patients treated with venoarterial extracorporal membrane oxygenation (VA-ECMO), in whom blood from the left ventricle and the ECMO system supply different parts of the body with different paCO2-levels. The purpose of this study was to compare two variants of paCO2-analysis to account for the Harlequin syndrome during apnea testing (AT) in brain death (BD) determination. MATERIALS AND METHODS: Twenty-seven patients (median age 48 years, 26-76 years; male n = 19) with VA-ECMO treatment were included who underwent BD determination. In variant 1, simultaneous arterial blood gas (ABG) samples were drawn from the right and the left radial artery. In variant 2, simultaneous ABG samples were drawn from the right radial artery and the postoxygenator ECMO circuit. Differences in paCO2-levels were analysed for both variants. RESULTS: At the start of AT, median paCO2-difference between right and left radial artery (variant 1) was 0.90 mmHg (95%-confidence intervall [CI]: 0.7-1.3 mmHg). Median paCO2-difference between right radial artery and postoxygenator ECMO circuit (variant 2) was 3.3 mmHg (95%-CI: 1.5-6.0 mmHg) and thereby significantly higher compared to variant 1 (p = 0.001). At the end of AT, paCO2-difference according to variant 1 remained unchanged with 1.1 mmHg (95%-CI: 0.9-1.8 mmHg). In contrast, paCO2-difference according to variant 2 increased to 9.9 mmHg (95%-CI: 3.5-19.2 mmHg; p = 0.002). CONCLUSIONS: Simultaneous paCO2-analysis from right and left distal arterial lines is the method of choice to reduce the risk of adverse effects (e.g. severe respiratory acidosis) while performing AT in VA-ECMO patients during BD determination.
Assuntos
Doenças do Sistema Nervoso Autônomo , Oxigenação por Membrana Extracorpórea , Rubor , Hipo-Hidrose , Humanos , Masculino , Pessoa de Meia-Idade , Feminino , Morte Encefálica , Oxigenação por Membrana Extracorpórea/métodos , Dióxido de CarbonoRESUMO
Medical nutritional therapy (MNT) in neurointensive care units (NICUs) is both particularly relevant and challenging due to prolonged analgosedation, immobilization, disorders of consciousness, and the high prevalence of dysphagia. Moreover, current guideline recommendations predominantly address the general intensive care unit (ICU) population, overlooking specific characteristics of neurological patients. We, therefore, conducted a web-based, cross-sectional survey for German-speaking neurointensivists mapping the clinical practices of MNT on NICUs to identify research gaps and common grounds for future clinical trials. A total of 25.9% (56/216) NICU representatives responded to our questionnaire. A total of 78.2% (43/55) were neurologist and 63% (34/54) held a leadership role. Overall, 80.4% (41/51) had established a standard operating procedure (SOP), largely based on the DGEM-Guideline (53.7%; 22/41), followed by the ESPEN-Guideline (14.6%; 6/41). Upon admission, 36% (18/50) conducted a risk stratification, with 83.3% primarily relying on past medical history (15/18) and clinical gestalt (15/18). Energy expenditure (EE) was measured or calculated by 75% (36/48), with 72.2% (26/36) using pragmatic weight-based equations. Indirect calorimetry was used by 19.4% (7/36). A total of 83.3% (30/36) used the patient's serum glucose level as the primary biomarker to monitor metabolic tolerance. SOPs regarding ICU-Acquired Weakness (ICUAW) were found in 8.9% (4/45) of respondents. Overall, guideline adherence was 47%. In summary, this is, to the best of our knowledge, the first study systematically describing the currently applied concepts of MNT on NICUs. The data reveal great variations in the implementation of guideline recommendations, indicating the need for further research and tailored approaches to optimize nutritional therapy in neurointensive care settings.
RESUMO
BACKGROUND: Aneurysms of the middle colic artery (MCAA) and its branches are exceedingly rare accounting for <3% of total visceral aneurysms. Very few MCAA cases have been reported in the literature with only three cases accounting for a diameter >4 cm. METHOD: We describe the successful open repair with ligation of a 4.2 cm asymptomatic MCAA in a female patient through the gastrohepatic ligament taking meticulous caution to avoid injury of the pancreas. The postoperative period was uneventful and the patient was discharged from the hospital on the fifth postoperative day. At 1 month follow-up the postoperative computed tomographic angiography documented complete exclusion of the MCAA and absence of contrast agent in the sac both in the arterial and the venous phase. CONCLUSION: While the endovascular treatment is the first-line option for visceral aneurysms, the open approach is still reserved for certain cases of hostile anatomy, challenging location and large size. Our case highlights the irreplaceable role of open surgery and underlines the collaboration between surgical specialties.
Assuntos
Aneurisma , Implante de Prótese Vascular , Procedimentos Endovasculares , Humanos , Feminino , Artéria Mesentérica Inferior/cirurgia , Resultado do Tratamento , Aneurisma/diagnóstico por imagem , Aneurisma/cirurgia , Artéria Mesentérica Superior/cirurgiaRESUMO
INTRODUCTION: Two recent studies showed clinical benefit for endovascular treatment (EVT) in basilar artery occlusion (BAO) stroke up to 12 h (ATTENTION) and between 6 and 24 h from onset (BAOCHE). Our aim was to investigate the cost-effectiveness of EVT from a U.S. healthcare perspective. MATERIALS AND METHODS: Clinical input data were available for both trials, which were analyzed separately. A decision model was built consisting of a short-run model to analyze costs and functional outcomes within 90 days after the index stroke and a long-run Markov state transition model (cycle length of 12 months) to estimate expected lifetime costs and outcomes from a healthcare and a societal perspective. Incremental cost-effectiveness ratios (ICER) were calculated, deterministic (DSA) and probabilistic (PSA) sensitivity analyses were performed. RESULTS: EVT in addition to best medical management (BMM) resulted in additional lifetime costs of $32,063 in the ATTENTION trial and lifetime cost savings of $7690 in the BAOCHE trial (societal perspective). From a healthcare perspective, EVT led to incremental costs and effectiveness of $37,389 and 2.0 QALYs (ATTENTION) as well as $3516 and 1.9 QALYs (BAOCHE), compared to BMM alone. The ICER values were $-4052/QALY (BAOCHE) and $15,867/QALY (ATTENTION) from a societal perspective. In each trial, PSA showed EVT to be cost-effective in most calculations (99.9%) for a willingness-to-pay threshold of $100,000/QALY. Cost of EVT and age at stroke represented the greatest impact on the ICER. DISCUSSION: From an economic standpoint with a lifetime horizon, EVT in addition to BMM is estimated to be highly effective and cost-effective in BAO stroke.
Assuntos
Artéria Basilar , Acidente Vascular Cerebral , Humanos , Ensaios Clínicos como Assunto , Análise Custo-Benefício , Atenção à Saúde , Acidente Vascular Cerebral/terapiaRESUMO
The present study aimed to compare the microstructure, physical, and mechanical properties of three commercially available dental polychromatic multilayer zirconia materials of uniform composition: Dima Mill Zirconia ML, VITA YZ/ST Multicolor, and VITA YZ/XT Multicolor (with 3, 4, and 5 mol% Y2 O3 , respectively); thus, the influence of Y2 O3 content on the above properties of the produced materials was experimentally studied. Homogeneous zirconia ceramics with a dense micro- and nanostructure, without pores or defects, were produced after milling the blocks and sintering, which resulted in yttrium-stabilized tetragonal and cubic zirconia. Statistical analysis of the results of measurable magnitudes was performed by the one-way ANOVA test. The increase of Y2 O3 content (from 3 to 5 mol%) favored larger grain and crystallite sizes and a decrease of the values of the mechanical properties; yet, the differences were statistically insignificant. Clinically, these differences are expected to have no impact on their function in the oral cavity, both in terms of their fracture propensity and the damage that can be caused to the opposing teeth. Accordingly, the experimental results qualify the polychromic multilayer zirconia ceramics of uniform composition fabricated by milling technology for use in dental restorations.
Assuntos
Cerâmica , Materiais Dentários , Materiais Dentários/química , Teste de Materiais , Cerâmica/química , Zircônio/química , Propriedades de SuperfícieRESUMO
OBJECTIVES: The aim of the present work was to evaluate six commercially available abutment screws by characterising roughness parameters, microstructure and mechanical properties. METHODS: Six abutment screws from each implant system, were used. The surface roughness parameters (Sa, Sq, Ssk, Sku, Spk, Sk and Svk) were identified by an optical interferometric profiler. Microstructural observations and crystallographic analysis were performed using a scanning electron microscope (SEM) equipped with an energy dispersive X-ray spectroscopy (EDX) device for elemental analysis and an X-ray diffractometer (XRD), respectively. The Martens Hardness (HM), Indentation Modulus (EIT), elastic index (ηIT) and Vickers hardness (HV) of all specimens were determined by instrumented indentation testing (IIT). The results were analyzed by one-way ANOVA and Tukey multiple-comparison tests (a=0.05). RESULTS: EDX and XRD showed the abutment screws to be mixed α- and ß-phase titanium alloys. Microstructural analysis revealed a fine homogeneous microstructure without porosity, consisting of fine dispersoid rods of ß-phase embedded in a continuous α-phase matrix. Statistically significant differences were found among the mechanical properies and surface roughness parameters apart from Sq, Spk and Svk. CONCLUSIONS: The tested abutment screws showed significant differences in the probed properties, and, thus, differences in their clinical behaviour are anticipated.
Assuntos
Implantes Dentários , Teste de Materiais , Dureza , Porosidade , Espectrometria por Raios X , Propriedades de Superfície , Titânio/químicaRESUMO
BACKGROUND: Although the relevance of neurointensive medicine and high-quality training of corresponding physicians is increasingly recognized, there is high heterogeneity in the nature, duration, and quality of neurointensive care curricula around the world. Thus, we aimed to identify, define, and establish validity evidence for entrustable professional activities (EPAs) for postgraduate training in neurointensive care to determine trainees' readiness for being on-call. METHODS: After defining EPAs through an iterative process by an expert group, we used a modified Delphi approach with a single-center development process followed by a national consensus and a single-center validation step. EPAs were evaluated by using the EQual rubric (Queen's EPA Quality Rubric). Interrater reliability was measured with Krippendorff's α. RESULTS: The expert group defined seven preliminary EPAs for neurointensive care. In two consecutive Delphi rounds, EPAs were adapted, and consensus was reached for level of entrustment and time of expiration. Ultimately, EPAs reached a high EQual score of 4.5 of 5 and above. Interrater reliability for the EQual scoring was 0.8. CONCLUSIONS: Using a multistep Delphi process, we defined and established validity evidence for seven EPAs for neurointensive medicine with a high degree of consensus to objectively describe readiness for on-call duty in neurointensive care. This operationalization of pivotal clinical tasks may help to better train clinical residents in neurointensive care across sites and health care systems and has the potential to serve as a blueprint for training in general intensive care medicine. It also represents a starting point for further research and development of medical curricula.
Assuntos
Educação Baseada em Competências , Internato e Residência , Humanos , Técnica Delphi , Reprodutibilidade dos Testes , Currículo , Competência ClínicaRESUMO
This study aims at evaluating the effect of simulating porcelain firing on the microstructure, corrosion behavior and mechanical properties of a Co-Cr-Mo alloy fabricated by Metal Soft Milling (MSM). Two groups of Co-28Cr-5Mo specimens (25 × 20 × 3 mm) were prepared by MSM: The as-sintered (AS) specimens and the post-fired (PF) specimens that were subjected to 5 simulating porcelain firing cycles without applying the ceramic mass onto their surface. Phase identification by X-ray Diffraction (XRD), microstructure examination by optical microscopy and Scanning Electron Microscopy combined with Energy-Dispersive X-ray Spectroscopy (SEM/EDX), corrosion testing by cyclic polarization and chronoamperometry in simulated body fluid (SBF), the latter test accompanied by Cr3+ and Cr6+ detection in the electrolyte through the 1.5-diphenylcarbazide (DPC) method and UV/visible spectrophotometry, and mechanical testing by micro-/nano-indentation were conducted to evaluate the effect of the post-firing cycles on the properties of Co-Cr-Mo. The results were statistically analyzed by the t test (p < 0.05: statistically significant). All specimens had a mixed γ-fcc and ε-hcp cobalt-based microstructure with a dispersion of pores filled with SiO2 and a fine M23C6 intergranular presence. PF led to an increase in the ε-Co content and slight grain coarsening. Both AS and PF alloys showed high resistance to general and localized corrosion, whereas neither Cr6+ nor Cr3+ were detected during the passivity-breakdown stage. PF improved the mechanical properties of the AS-alloy, especially the indentation modulus and true hardness (statistically significant differences: p = 0.0009 and 0.006, respectively). MSM and MSM/simulating-porcelain firing have been proven trustworthy fabrication methods of Co-Cr-Mo substrates for metal-ceramic prostheses. Moreover, the post-firing cycles improve the mechanical behavior of Co-Cr-Mo, which is vital under the dynamically changing loads in the oral cavity, whereas they do not degrade the corrosion performance.
Assuntos
Ligas de Cromo , Ligas Metalo-Cerâmicas , Ligas de Cromo/química , Ligas Metalo-Cerâmicas/química , Porcelana Dentária/química , Corrosão , Dióxido de Silício , Propriedades de Superfície , Teste de MateriaisRESUMO
BACKGROUND: Patients with subarachnoid hemorrhage (SAH) often necessitate intra-hospital transport (IHT) during intensive care treatment. These transfers to facilities outside of the neurointensive care unit (NICU) pose challenges due to the inherent instability of the hemodynamic, respiratory, and neurological parameters that are typical in these patients. METHODS: In this retrospective, single-center cohort study, a total of 108 IHTs were analyzed for demographics, transport rationale, clinical outcomes, and pre/post-IHT monitoring parameters. After establishing clinical thresholds, the frequency of complications was calculated, and predictors of thresholds violations were determined. RESULTS: The mean age was 55.7 (+/-15.3) years, with 68.0% showing severe SAH (World Federation of Neurosurgical Societies Scale 5). IHTs with an emergency indication made up 30.8% of all transports. Direct therapeutic consequences from IHT were observed in 38.5%. On average, the first IHT occurred 1.5 (+/-2.0) days post-admission and patients were transported 4.3 (+/-1.8) times during their stay in the NICU. Significant parameter changes from pre- to post-IHT included mean arterial pressure, systolic blood pressure, oxygen saturation, blood glucose levels, temperature, dosages of propofol and ketamine, tidal volume, inspired oxygen concentration, Horovitz index, glucose, pH, intracranial pressure, and cerebral perfusion pressure. Relevant hemodynamic thresholds were violated in 31.5% of cases, while respiratory complications occurred in 63.9%, and neurological complications in 20.4%. For hemodynamic complications, a low heart rate with a threshold of 61/min (OR 0.96, 95% CI 0.93-0.99, p = 0.0165) and low doses of midazolam with a threshold of 17.5 mg/h (OR 0.97, 95% CI 0.95-1.00, p = 0.0232) significantly predicted adverse events. However, the model did not identify significant predictors for respiratory and neurological outcomes. CONCLUSIONS: Conclusively, IHTs in SAH patients are associated with relevant changes in hemodynamic, respiratory, and neurological monitoring parameters, with direct therapeutic consequences in 4/10 IHTs. These findings underscore the importance of further studies on the clinical impact of IHTs.