Mode-coupled perturbation growth on the interfaces of cylindrical implosion: A comparison between theory and experiment.

We present a mode-coupled weakly nonlinear model for the evolution of perturbations on cylindrical multilayered shells in a decelerating implosion. We show that nonlinear mode-mode interactions among large wave-number fundamental modes are able to induce the growth of small wave number harmonic modes, i.e., forming inverse cascade channels in the wave-number space. When uniform compression and interfacial coupling are taken into consideration, the amplitude of some perturbation modes exhibits an oscillatory growth pattern, which is beyond the intuition that perturbation amplitudes usually have a fast growth tendency in an implosion dominated by the Bell-Plesset effect. Our model accounts well for the previous experiments of Hsing et al. [Hsing et al., Phys. Rev. Lett. 78, 3876 (1997)0031-900710.1103/PhysRevLett.78.3876 and Phys. Plasmas 4, 1832 (1997)1070-664X10.1063/1.872326], which is among the few experiments of multimode multiinterface perturbation development in a cylindrical implosion. In particular, we find that the inverse cascade of modes is the origin of the excitation and growth of the wave number k=2 harmonic mode on the inner interface. The observed decrease of the fundamental modes on the inner interface is mainly attributed to the decreasing period of the oscillatory growth process. These results may afford further insight into the distortion of hot spots in inertial confined fusion implosion near the final stage, and also help to design multimode perturbation experiments in converging geometry in the coming future.

Compact multichannel spectrometer employed for soft x-ray spectrum diagnostics at the Shenguang-III Laser Facility.

The quantitative measurement of plasma soft x-ray spectra is an important diagnostic problem in indirect-drive laser inertial confinement fusion (ICF). We designed, built, and tested a compact multichannel soft x-ray spectrometer with both spatial and temporal resolution capabilities for the detection of the spatiotemporal distribution of soft x-ray spectra. The spectrometer occupies a small solid angle, and the close measurement angle used for each channel enables the measurement of the angular distribution of emitting soft x-rays in ICF experiments. The spectrometer comprises pinhole, filter, and multilayer flat mirror arrays, and an x-ray streak camera. Its energy range is 0.1 - 3 keV. The dispersive elements of the spectrometer were calibrated at the Beijing Synchrotron Radiation Facility. The accuracy of the calibration was ≤ 5%, and the combined energy resolution (E/ΔE) of the calibrated dispersive elements of each channel was higher than 10. Finally, the instrument was tested at the Shenguang-III Laser Facility. The measurement results of x-ray radiation flux are agreed well with the experimental results of the M-band flat-response x-ray diode, demonstrating the feasibility of the proposed spectrometer configuration.

First Indirect Drive Experiment Using a Six-Cylinder-Port Hohlraum.

The new hohlraum experimental platform and the quasi-3D simulation model are developed to enable the study of the indirect drive experiment using the six-cylinder-port hohlraum for the first time. It is also the first implosion experiment for the six laser-entrance-hole hohlraum to effectively use all the laser beams of the laser facility that is primarily designed for the cylindrical hohlraum. The experiments performed at the 100 kJ Laser Facility produce a peak hohlraum radiation temperature of ∼222 eV for ∼80 kJ and 2 ns square laser pulse. The inferred x-ray conversion efficiency η∼87% is similar to the cylindrical hohlraum and higher than the octahedral spherical hohlraum at the same laser facility, while the low laser backscatter is similar to the outer cone of the cylindrical hohlraum. The hohlraum radiation temperature and M-band (>1.6 keV) flux can be well reproduced by the quasi-3D simulation. The variations of the yield-over-clean and the hot spot shape can also be semiquantitatively explained by the calculated major radiation asymmetry of the quasi-3D simulation. Our work demonstrates the capability for the study of the indirect drive with the six-cylinder-port hohlraum at the cylindrically configured laser facility, which is essential for numerically assessing the laser energy required by the ignition-scale six-cylinder-port hohlraum.

Measurement of Time-Dependent Drive Flux on the Capsule for Indirectly Driven Inertial Confinement Fusion Experiments.

A new method for measuring the time-dependent drive flux at the hohlraum center is proposed as a better alternative to conventional wall-based techniques. The drive flux here is obtained by simultaneous measurement of the reemitted flux and shock velocity from a three-layered "cakelike" sample. With these two independent observables, the influence induced by the uncertainty of the material parameters of the sample can be effectively decreased. The influence from the closure of the laser entrance hole, which was the main challenge in conventional wall-based techniques, was avoided through localized reemitted flux measurement, facilitating drive flux measurement throughout the entire time history. These studies pave a new way for probing the time-dependent drive flux, for both cylindrical hohlraums and novel hohlraums with six laser entrance holes.

Quantitative observation of monochromatic X-rays emitted from implosion hotspot in high spatial resolution in inertial confinement fusion.

In inertial confinement fusion, quantitative and high-spatial resolution ([Formula: see text]m) measurements of the X-rays self-emitted by the hotspot are critical for studying the physical processes of the implosion stagnation stage. Herein, the 8 ± 0.39-keV monochromatic X-ray distribution from the entire hotspot is quantitatively observed in 5-[Formula: see text]m spatial resolution using a Kirkpatrick-Baez microscope, with impacts from the responses of the diagnosis system removed, for the first time, in implosion experiments at the 100 kJ laser facility in China. Two-dimensional calculations along with 2.5% P2 drive asymmetry and 0.3 ablator self-emission are congruent with the experimental results, especially for the photon number distribution, hotspot profile, and neutron yield. Theoretical calculations enabled a better understanding of the experimental results. Furthermore, the origins of the 17.81% contour profile of the deuterium-deuterium hotspot and the accurate Gaussian source approximation of the core emission area in the implosion capsule are clarified in detail. This work is significant for quantitatively exploring the physical conditions of the hotspot and updating the theoretical model of capsule implosion.

Four-channel toroidal crystal x-ray imager for laser-produced plasmas.

The motion law of complex fluids under extreme conditions is an important aspect of high energy density physics research. It has been demonstrated that using multi-channel curved crystals and a framing camera to observe the laser-produced target pellets doped with tracer elements is an appropriate method for investigating this law. This paper presents a feasible design scheme for a multi-channel toroidal imager, with the ray trace model used to verify the rationality of the evaluation method and the aberration of single toroidal crystal imaging. We demonstrate that the field of view (FOV) consistency of the four-channel Ge(400) toroidal crystal imager is less than 50 µm, while the best spatial resolution is ∼4 µm and the FOV of each channel is >2.2 mm.

Spin depolarization induced by self-generated magnetic fields during cylindrical implosions.

Spin-polarized fuels are promising for inertial confinement fusion due to the enhanced fusion cross section. One significant concern of spin-polarized inertial confinement fusion is whether the nuclei polarization could survive in the implosions and contribute to ignitions. Here we present numerical simulation methods and results of spin dynamics of polarized deuterium-tritium fuels in strong self-generated magnetic fields during the implosions of dense cylindrical shells. The magnetic field generation and evolution is modeled with generalized Ohm's laws combined with hydrodynamic equations. The spin dynamics is investigated with a particle-tracking method, by solving the spin precession equations of tracked particles. Rayleigh-Taylor instabilities and Richtmyer-Meshkov instabilities are found to be the main cause of depolarization. Hydrodynamic instabilities lead to depolarization of nuclei near the hot-spot shell interface, and an asymmetric shock front leads to depolarization of nuclei inside a hot spot. Deuterium polarization is more stable than tritium polarization due to its smaller gyromagnetic ratio. Low-mode perturbations can lead to higher depolarization inside a hot spot than high-mode perturbations. In the multimode simulations, the modes around 16-32 are significant for hot-spot depolarization.

Chunk mixing implosion experiments using deuterated foam capsules with gold dopant.

To study the effects of chunk mixing, the implosion experiments using capsules filled with deuterated foam (CDF capsule) were carried out on the Shenguang laser facility. Three types of the CDF capsules, namely the capsules without Au dopant, with micrometer Au dopant, and with atomic Au dopant, were used in the experiments. The neutron yields, the size, and the emission intensity of the hotspots were measured. The CDF capsules without Au dopant produced the highest neutron yield and the largest hotspot size at the time of peak emission. The capsules with micrometer or atomic Au dopant showed similar reduced neutron yield and hotspot size. The time-resolved hotspot emissions showed different behaviors between different capsules. One-dimensional simulations were carried out to understand the implosion dynamics of the CDF capsule without Au dopant, and to provide the thermodynamic conditions that the Au dopant would experience during the implosion. The effects of Au dopant were then discussed qualitatively.

Improvement in Thomson scattering diagnostic precision via fitting the multiple-wavenumber spectra simultaneously.

Thomson scattering (TS) is a powerful diagnostics for understanding the plasma conditions in high energy density experiments. With the aid of Monte Carlo simulation and statistical analysis, we demonstrated unreported high precisions of ne, Te, Ti, etc., via fitting the multiple-wavenumber spectra of ion-acoustic featured TS simultaneously. For instance, utilizing this method in the current typical conditions on SG-180kJ laser facility, the precisions of ne, Te would be better than 8% and 0.5%, respectively. We presented the fitting precisions at different cases and the chi-square trends of the single- and dual-branch TS. This diagnostic technique is found to be applicable within a wide range of plasma parameters and wavenumbers, which is practical to prompt much more precise plasma diagnostics in experiments.

Development of a polar-view Kirkpatrick-Baez X-ray microscope for implosion asymmetry studies.

The development of a polar-view Kirkpatrick-Baez microscope, fielded in the upper polar zone of the Shenguang-III laser fusion facility, is presented. With this microscope, the resolving power of polar-direction X-ray imaging diagnostics is improved, to the 3 ~5 µm scale. The microscope is designed for implosion asymmetry studies, with response energy points at 1.2 keV, 3.5 keV, and 8 keV. A biperiodic multilayer scheme is adopted to accommodate multiple implosion stages. We present the overall optical system design, target aiming scheme, characteristic composite imaging diagnostic experiments and initial results. The inertial-driven quasi-one-dimensional spherical implosions were observed from orthogonal directions with a convergence ratio of ~14.4. Fine features of the stagnating hot spot core are also resolved.

First exploration of radiation temperatures of the laser spot, re-emitting wall and entire hohlraum drive source.

This study explores the radiation field temperatures introduced by the laser spot, the re-emitting wall in a hohlraum and the entire hohlraum drive source. This investigation, which is the first of its kind, is based on the radiation fluxes from the laser spot and the re-emitting wall, which have been accurately measured using time- and space-resolving flux detectors in a recent work, and additional flux data. The temperature difference between the laser spot and the entire hohlraum drive source was 6.08-35.35% of the temperature of the latter throughout the entire laser pulse, whilst that for the re-emitting wall was 3.90-12.81%. The radiation temperature of the cooler re-emitting wall had more influence on the temperature increase of the entire hohlraum drive source than the hot laser-spot temperature, which has been quantitatively discussed. Experimentally, we established the average distributions of the temperature fields of all the emitting sources, namely laser spot and re-emitting wall, of the irradiating fluxes on the capsule region in the hohlraum radiation field. This important progress in the exploration of radiation temperature distributions within a hohlraum will provide a foundation for determination of the irradiating radiation on the capsule and evaluation of capsule symmetry.

Note: New method for high-space-resolving hotspot electron temperature measurements on Shenguang-III prototype.

High-space-resolving information of hotspot electron temperature is a foundation for further research on physical processes of implosion in inertial confinement fusion. This work proposed a novel high-space-resolving electron temperature detector, which is based on the bremsstrahlung radiation mechanism of the implosion hotspot and uses two-channel Kirkpatrick-Baez microscopes. In this novel detector, an optical quasi-coaxis method was used to eliminate the strong impact of the view field difference on the high space resolution and correctness of the electron temperature diagnosis, and a compound KB microscope method was proposed to reduce the number of spherical reflectors and save space.

Implementation of ultraviolet Thomson scattering on SG-III laser facility.

An ultraviolet Thomson-scattering system has been designed and implemented on the Shenguang-III laser facility, a 48-beam, 3ω (351 nm), 180 kJ-level laser driver for high energy density physics and inertial confinement fusion researches. The 4ω (263.3 nm) probe beam of the Thomson-scattering system is injected from the north pole (top) of the target chamber, with an assistant beam-pointing monitor to achieve high pointing accuracy. The Thomson-scattered light is collected by a double-Cassegrain optical transmission system, which provides an achromatic image over a wide wavelength range of 200-800 nm. A novel on-line alignment method is developed and applied to the diagnostic system, ensuring a volumetric positioning accuracy of ∼30 µm for the scattering volume. An online calibration is also conducted to provide the wavelength benchmark and the spectral resolution of the system. This Thomson-scattering system has been tested in a complicated experimental environment with gas-filled hohlraums, and a high-quality ion feature of the scattered light has been obtained.

Application of the space-resolving flux detector for radiation measurements from an octahedral-aperture spherical hohlraum.

Space-resolving flux detection is an important technique for the diagnostic of the radiation field within the hohlraum in inertial confinement fusion, especially for the radiation field diagnostic in the novel spherical hohlraum with octahedral six laser entrance holes (LEHs), where localized measurements are necessary for the discrimination of the radiation flux from different LEHs. A novel space-resolving flux detector (SRFD) is developed at the SG-III laser facility for the radiation flux measurement in the first campaign of the octahedral spherical hohlraum energetics experiment. The principle and configuration of the SRFD system is introduced. The radiation flux from the wall of a gas-filled octahedral spherical hohlraum is measured for the first time by placing the SRFD system at the equatorial position of the SG-III laser facility, aiming at the hohlraum wall through one of the six LEHs. The absolute radiation flux from the re-emission area on the hohlraum wall is measured, and good consistency is found between the experimental data and the calculated data from a three-dimensional view factor analysis.

First Octahedral Spherical Hohlraum Energetics Experiment at the SGIII Laser Facility.

The first octahedral spherical hohlraum energetics experiment is accomplished at the SGIII laser facility. For the first time, the 32 laser beams are injected into the octahedral spherical hohlraum through six laser entrance holes. Two techniques are used to diagnose the radiation field of the octahedral spherical hohlraum in order to obtain comprehensive experimental data. The radiation flux streaming out of laser entrance holes is measured by six flat-response x-ray detectors (FXRDs) and four M-band x-ray detectors, which are placed at different locations of the SGIII target chamber. The radiation temperature is derived from the measured flux of FXRD by using the blackbody assumption. The peak radiation temperature inside hohlraum is determined by the shock wave technique. The experimental results show that the octahedral spherical hohlraum radiation temperature is in the range of 170-182 eV with drive laser energies of 71 kJ to 84 kJ. The radiation temperature inside the hohlraum determined by the shock wave technique is about 175 eV at 71 kJ. For the flat-top laser pulse of 3 ns, the conversion efficiency of gas-filled octahedral spherical hohlraum from laser into soft x rays is about 80% according to the two-dimensional numerical simulation.

Direct intensity calibration of X-ray grazing-incidence microscopes with home-lab source.

Direct intensity calibration of X-ray grazing-incidence microscopes is urgently needed in quantitative studies of X-ray emission from laser plasma sources in inertial confinement fusion. The existing calibration methods for single reflecting mirrors, crystals, gratings, filters, and X-ray detectors are not applicable for such X-ray microscopes due to the specific optical structure and the restrictions of object-image relation. This article presents a reliable and efficient method that can be performed using a divergent X-ray source and an energy dispersive Si-PIN (silicon positive-intrinsic-negative) detector in an ordinary X-ray laboratory. The transmission theory of X-ray flux in imaging diagnostics is introduced, and the quantities to be measured are defined. The calibration method is verified by a W/Si multilayer-coated Kirkpatrick-Baez microscope with a field of view of ∼95 µm at 17.48 keV. The mirror reflectance curve in the 1D coordinate is drawn with a peak value of 20.9% and an uncertainty of ∼6.0%.

Backscatter spectra measurements of the two beams on the same cone on Shenguang-III laser facility.

In laser driven hohlraums, laser beams on the same incident cone may have different beam and plasma conditions, causing beam-to-beam backscatter difference and subsequent azimuthal variations in the x-ray drive on the capsule. To elucidate the large variation of backscatter proportion from beam to beam in some gas-filled hohlraum shots on Shenguang-III, two 28.5° beams have been measured with the Stimulated Raman Scattering (SRS) time-resolved spectra. A bifurcated fiber is used to sample two beams and then coupled to a spectrometer and streak camera combination to reduce the cost. The SRS spectra, characterized by a broad wavelength, were further corrected considering the temporal distortion and intensity modulation caused by components along the light path. This measurement will improve the understanding of the beam propagation inside the hohlraum and related laser plasma instabilities.

Calibration of the linear response range of x-ray imaging plates and their reader based on image grayscale values.

X-ray imaging plates are one of the most important X-ray imaging detectors and are widely used in inertial-confinement fusion experiments. However, their linear response range, which is the foundation of their quantitative data analysis, has not been sufficiently deeply investigated. In this work, we develop an X-ray fluorescer calibration system and carefully explore the linear response range of X-ray imaging plates. For the first time, nearly the entire grayscale range of the X-ray imaging plate linear response-7819-64 879 in the range of 0-65 535-has been observed. Further, we discuss the uncertainties involved in the calibration process. This work demonstrates the excellent linear response qualities of X-ray imaging plates and provides a significant foundation for expanding their quantitative applied range.

Coaxial CVD diamond detector for neutron diagnostics at ShenGuang III laser facility.

A coaxial, high performance diamond detector has been developed for neutron diagnostics of inertial confinement fusion at ShenGuangIII laser facility. A Φ10 mm × 1 mm "optical grade" chemical-vapor deposition diamond wafer is assembled in coaxial-designing housing, and the signal is linked to a SubMiniature A connector by the cathode cone. The coaxial diamond detector performs excellently for neutron measurement with the full width at half maximum of response time to be 444 ps for a 50 Ω measurement system. The average sensitivity is 0.677 µV ns/n for 14 MeV (DT fusion) neutrons at an electric field of 1000 V/mm, and the linear dynamic range is beyond three orders of magnitude. The ion temperature results fluctuate widely from the neutron time-of-flight scintillator detector results because of the short flight length. These characteristics of small size, large linear dynamic range, and insensitive to x-ray make the diamond detector suitable to measure the neutron yield, ion temperature, and neutron emission time.

Development of an x-ray eight-image Kirkpatrick-Baez diagnostic system for China's laser fusion facility.

This article presents the development of an x-ray eight-image Kirkpatrick-Baez diagnostic system to be used at China's Shenguang-III (SG-III) laser facility in aspects of the optical design, multilayers, and online/offline tests. Six pieces of concave spherical substrates are used for constituting a special optical structure. Dual-periodic tungsten/carbon (W/C) multilayers are used for high reflectivity and large angular bandwidth of ∼0.1°. The global spatial resolution is ∼5 µm in the ±100 µm range. The schemes of system installation, transport, collimation, and image acquisition at China's SG-III facility are also discussed.