Fiber-connectorized ultrafast-laser-inscribed K-band integrated optics beam combiner for the CHARA telescope array.

A fiber-connectorized K-band integrated-optics two-telescope beam combiner was developed for long-baseline interferometry at the CHARA telescope array utilizing the ultrafast laser inscription (ULI) technique. Single-mode waveguide insertion losses were measured to be ∼1.1d B over the 2-2.3 µm window. The development of asymmetric directional couplers enabled the construction of a beam combiner that includes a 50:50 coupler for interferometric combination and two ∼75:25 couplers for photometric calibration. The visibility of the bare beam combiner was measured at 87% and then at 82% after fiber-connectorization by optimizing the input polarization. These results indicate that ULI technique can fabricate efficient fiber-connectorized K-band beam combiners for astronomical purposes.

Six-telescope integrated optics beam combiner fabricated using ultrafast laser inscription for J- and H-band astronomy.

We have built and characterized, to our knowledge, the first six-telescope discrete beam combiner (DBC) for stellar interferometry in the astronomical J-band. It is the DBC with the largest number of beam combinations and was manufactured using ultrafast laser inscription in borosilicate glass, with a throughput of ≈56%. For calibration of the visibility-to-pixel matrix, we use a two-input Michelson interferometer and extract the complex visibility. A visibility amplitude of 1.05 and relative precision of 2.9% and 3.8% are extracted for 1328 nm and 1380 nm, respectively. Broadband (≤40n m) characterization is affected by dispersion but shows similar performance.

Simulations of mode-selective photonic lanterns for efficient coupling of starlight into the single-mode regime.

In ground-based astronomy, starlight distorted by the atmosphere couples poorly into single-mode waveguides, but a correction by adaptive optics, even if only partial, can boost coupling into the few-mode regime, allowing the use of photonic lanterns to convert into multiple single-mode beams. Corrected wavefronts result in focal patterns that couple mostly with circularly symmetric waveguide modes. A mode-selective photonic lantern is hence proposed to convert multimode light into a subset of single-mode waveguides of the standard photonic lantern, thereby reducing the required number of outputs. We ran simulations to show that only two out of the six waveguides of a 1×6 photonic lantern carry >95% of the coupled light to the outputs at D/r0<10 if the wavefront is partially corrected and the photonic lantern is made mode selective.

First stellar photons for an integrated optics discrete beam combiner at the William Herschel Telescope.

We present the first on-sky results of a four-telescope integrated optics discrete beam combiner (DBC) tested at the 4.2 m William Herschel Telescope. The device consists of a four-input pupil remapper followed by a DBC and a 23-output reformatter. The whole device was written monolithically in a single alumino-borosilicate substrate using ultrafast laser inscription. The device was operated at astronomical H-band (1.6 µm), and a deformable mirror along with a microlens array was used to inject stellar photons into the device. We report the measured visibility amplitudes and closure phases obtained on Vega and Altair that are retrieved using the calibrated transfer matrix of the device. While the coherence function can be reconstructed, the on-sky results show significant dispersion from the expected values. Based on the analysis of comparable simulations, we find that such dispersion is largely caused by the limited signal-to-noise ratio of our observations. This constitutes a first step toward an improved validation of the DBC as a possible beam combination scheme for long-baseline interferometry.

Astrophotonics: introduction to the feature issue.

Astrophotonics is an emerging field that focuses on the development of photonic components for astronomical instrumentation. With ongoing advancements, astrophotonic solutions are already becoming an integral part of existing instruments. A recent example is the €60M ESO GRAVITY instrument at the Very Large Telescope Interferometer, Chile, that makes heavy use of photonic components. We envisage far-reaching applications in future astronomical instruments, especially those intended for the new generation of extremely large telescopes and in space. With continued improvements in extreme adaptive optics, the case becomes increasingly compelling. The joint issue of JOSA B and Applied Optics features more than 20 state-of-the-art papers in diverse areas of astrophotonics. This introduction provides a summary of the papers that cover several important topics, such as photonic lanterns, beam combiners and interferometry, spectrographs, OH suppression, and coronagraphy.

Ultracold atom interferometry in space.

Bose-Einstein condensates (BECs) in free fall constitute a promising source for space-borne interferometry. Indeed, BECs enjoy a slowly expanding wave function, display a large spatial coherence and can be engineered and probed by optical techniques. Here we explore matter-wave fringes of multiple spinor components of a BEC released in free fall employing light-pulses to drive Bragg processes and induce phase imprinting on a sounding rocket. The prevailing microgravity played a crucial role in the observation of these interferences which not only reveal the spatial coherence of the condensates but also allow us to measure differential forces. Our work marks the beginning of matter-wave interferometry in space with future applications in fundamental physics, navigation and earth observation.

Compact and robust diode laser system technology for dual-species ultracold atom experiments with rubidium and potassium in microgravity.

We present a compact and robust distributed-feedback diode laser system architecture for ultracold atom experiments with K41 and Rb87 in a mobile setup operating at the ZARM drop tower in Bremen. Our system withstands DC accelerations of up to 43 g in operation with only minor adjustments over several drop campaigns. Micro-integrated master-oscillator-power-amplifier modules in conjunction with miniaturized, free-space opto-mechanics are integrated on a platform with a volume of 43 L. With compact control and driver electronics, this laser system features output power and spectral characteristics suitable for 2D+ and 3D magneto-optical trapping operation, atomic state preparation, Bragg-diffraction-based atom interferometry, and detection.

Space-borne Bose-Einstein condensation for precision interferometry.

Owing to the low-gravity conditions in space, space-borne laboratories enable experiments with extended free-fall times. Because Bose-Einstein condensates have an extremely low expansion energy, space-borne atom interferometers based on Bose-Einstein condensation have the potential to have much greater sensitivity to inertial forces than do similar ground-based interferometers. On 23 January 2017, as part of the sounding-rocket mission MAIUS-1, we created Bose-Einstein condensates in space and conducted 110 experiments central to matter-wave interferometry, including laser cooling and trapping of atoms in the presence of the large accelerations experienced during launch. Here we report on experiments conducted during the six minutes of in-space flight in which we studied the phase transition from a thermal ensemble to a Bose-Einstein condensate and the collective dynamics of the resulting condensate. Our results provide insights into conducting cold-atom experiments in space, such as precision interferometry, and pave the way to miniaturizing cold-atom and photon-based quantum information concepts for satellite-based implementation. In addition, space-borne Bose-Einstein condensation opens up the possibility of quantum gas experiments in low-gravity conditions1,2.