3D printed structures for modeling the Young's modulus of bamboo parenchyma.

Bamboo is a sustainable, lightweight material that is widely used in structural applications. To fully develop micromechanical models for plants, such as bamboo, the mechanical properties of each individual type of tissue are needed. However, separating individual tissues and testing them mechanically is challenging. Here, we report an alternative approach in which micro X-ray computed tomography (µ-CT) is used to image moso bamboo (Phyllostachys pubescens). The acquired images, which correspond to the 3D structure of the parenchyma, are then transformed into physical, albeit larger scale, structures by 3D printing, and their mechanical properties are characterized. The normalized longitudinal Young's moduli of the fabricated structures depend on relative density raised to a power between 2 and 3, suggesting that elastic deformation of the parenchyma cellular structure involves considerable cell wall bending. The mechanical behavior of other biological tissues may also be elucidated using this approach. STATEMENT OF SIGNIFICANCE: Bamboo is a lightweight, sustainable engineering material widely used in structural applications. By combining micro X-ray computed tomography and 3D printing, we have produced bamboo parenchyma mimics and characterized their stiffness. Using this approach, we gained insight into bamboo parenchyma tissue mechanics, specifically the cellular geometry's role in longitudinal elasticity.

The structure and mechanics of Moso bamboo material.

Although bamboo has been used structurally for millennia, there is currently increasing interest in the development of renewable and sustainable structural bamboo products (SBPs). These SBPs are analogous to wood products such as plywood, oriented strand board and glue-laminated wood. In this study, the properties of natural Moso bamboo (Phyllostachys pubescens) are investigated to further enable the processing and design of SBPs. The radial and longitudinal density gradients in bamboo give rise to variations in the mechanical properties. Here, we measure the flexural properties of Moso bamboo in the axial direction, along with the compressive strengths in the axial and transverse directions. Based on the microstructural variations (observed with scanning electron microscopy) and extrapolated solid cell wall properties of bamboo, we develop models, which describe the experimental results well. Compared to common North American construction woods loaded along the axial direction, Moso bamboo is approximately as stiff and substantially stronger, in both flexure and compression but denser. This work contributes to critical knowledge surrounding the microstructure and mechanical properties of bamboo, which are vital to the engineering and design of sustainable SBPs.

Effects of temperature variation on suicide in five U.S. counties, 1991-2001.

Effects of weather variables on suicide are well-documented, but there is still little consistency among the results of most studies. Nevertheless, most studies show a peak in suicides during the spring season, and this is often attributed to increased temperatures. The purpose of this study is to test the relationship between monthly temperature and monthly suicide, independent of months or seasons, for five counties located across the United States. Harmonic analysis shows that four of the five counties display some seasonal components in the suicide data. However, simple linear regression shows no correlation between suicide and temperature, and discriminant analysis shows that monthly departure from mean annual suicide rates is not a useful tool for identifying months with temperatures that are colder or warmer than the annual average. Therefore, it appears that the seasonality of suicides is due to factors other than temperature.

Postnatal development of retinal projections in the brushtailed possum, Trichosurus vulpecula.

The postnatal development of retinal projections was studied in the brushtailed possum, Trichosurus vulpecula. [3H]proline was injected into one eye of 13 young possums aged 24-84 days in order to trace retinal pathways. The dorsal lateral geniculate nucleus (LGNd) can be identified in Nissl material at 19 days but not at 9-10 days. By 40 days some cytoarchitectural lamination of the LGNd is apparent and by 71 days the adult pattern of cell layers is present. At 24 days retinal fibers occupy by lateral part of the LGNd on both sides of the brain. By 38-40 days the retinal fibers fill be contralateral LGNd and the binocular part of the ipsilateral LGNd and there is a beginning of the segregation of retinal fibers into left and right eye territories. By 49-50 days a partial segregation is achieved, and complete segregation by 71 days. At 9-10 days the superior colliculus is not differentiated into layers and there is a thick zone of cell proliferation around the ventricle. By 23 days the superior colliculus has well-defined cell layers and there is still some indication of cell proliferation around the ventricle. By 40 days, the superior colliculus shows little evidence of cell proliferation. At 24 days retinal fibers fill the superficial layers of the contralateral optic tectum and are lightly distributed through the superficial layers of the rostral half of the ipsilateral tectum. By 38 days the ipsilateral retinal input is restricted to the deeper layers of the tectum. These results show that the adult pattern of retinal projections to the LGNd and optic tectum develops a number of weeks before eye opening occurs (at 90-120 days).

Properties of the ribosomes of antibiotic producers: effects thiostrepton and micrococcin on the organisms which produce them.

Ribosomes of Streptomyces azureus, which produces thiostrepton, are resistant to thiostrepton by virtue of being unable to bind the antibiotic. These ribosomes are also resistant to a number of other antibiotics (the thiostrepton group) which may share a common ribosomal binding site and a common mode of action with thiostrepton. Conversely, Bacillus pumilis and a strain of micrococcus, which produce the (probably identical) antibiotics micrococcin P and micrococcin, respectively, possess ribosomes which are susceptible to these antibiotics in vitro, although the organisms themselves are resistant.