Distribution characteristics and ecological risks of heavy metals in bottom ash, fly ash, and particulate matter released from municipal solid waste incinerators in northern Vietnam.

Residue concentrations of heavy metals, including As, Cd, Cr, Cu, Ni, Pb, and Zn, were determined in bottom ash, fly ash, and particulate matter (PM10) samples collected from five municipal incinerators in northern Vietnam to assess their occurrence, distribution characteristics, and potential risks. Concentrations and profiles of heavy metals are presented, showing the dominance of Zn in all types of samples. Highly volatile elements (Cd, Pb, and Zn) were found at elevated proportions in PM10 but not fly ash. The large difference in the heavy metal profiles could be explained by the variation of input raw materials, the absence of an appropriate cycle for the material feeding process, and post-combustion technology applied. Mass balance of heavy metals in the bottom ash, fly ash, and PM10 varied significantly between the investigated incinerators, largely due to the difference in incineration technology and air pollution control system. Emission factors and annual emissions were also estimated, indicating the highest value and amount in bottom ash, followed by PM10 and fly ash. Our results are among the first studies reporting contents and emissions of toxic elements in incinerated solid wastes in Vietnam.

Flexible Epsilon Iron Oxide Thin Films.

Metastable ε-Fe2O3 is a unique phase of iron oxide, which exhibits a giant coercivity field. In this work, we grew epitaxial ε-Fe2O3 films on flexible two-dimensional muscovite substrates via quasi van der Waals epitaxy. It turns out that twinning and interface energies have been playing essential roles in stabilizing metastable ε-Fe2O3 on mica substrates. Moreover, the weak interfacial bonding between ε-Fe2O3 and mica is expected to relieve the substrate clamping effect ubiquitously encountered in films epitaxially grown on rigid substrates, such as SrTiO3. It is anticipated that these flexible ε-Fe2O3 thin films can serve as a platform for exploring possible interesting emergent physical properties and eventually be integrated as flexible functional devices.

Flexible ferroelectric element based on van der Waals heteroepitaxy.

We present a promising technology for nonvolatile flexible electronic devices: A direct fabrication of epitaxial lead zirconium titanate (PZT) on flexible mica substrate via van der Waals epitaxy. These single-crystalline flexible ferroelectric PZT films not only retain their performance, reliability, and thermal stability comparable to those on rigid counterparts in tests of nonvolatile memory elements but also exhibit remarkable mechanical properties with robust operation in bent states (bending radii down to 2.5 mm) and cycling tests (1000 times). This study marks the technological advancement toward realizing much-awaited flexible yet single-crystalline nonvolatile electronic devices for the design and development of flexible, lightweight, and next-generation smart devices with potential applications in electronics, robotics, automotive, health care, industrial, and military systems.

Flexible Multiferroic Bulk Heterojunction with Giant Magnetoelectric Coupling via van der Waals Epitaxy.

Magnetoelectric nanocomposites have been a topic of intense research due to their profound potential in the applications of electronic devices based on spintronic technology. Nevertheless, in spite of significant progress made in the growth of high-quality nanocomposite thin films, the substrate clamping effect still remains a major hurdle in realizing the ultimate magnetoelectric coupling. To overcome this obstacle, an alternative strategy of fabricating a self-assembled ferroelectric-ferrimagnetic bulk heterojunction on a flexible muscovite via van der Waals epitaxy is adopted. In this study, we investigated the magnetoelectric coupling in a self-assembled BiFeO3 (BFO)-CoFe2O4 (CFO) bulk heterojunction epitaxially grown on a flexible muscovite substrate. The obtained heterojunction is composed of vertically aligned multiferroic BFO nanopillars embedded in a ferrimagnetic CFO matrix. Moreover, due to the weak interaction between the flexible substrate and bulk heterojunction, the interface is incoherent and, hence, the substrate clamping effect is greatly reduced. The phase-field simulation model also complements our results. The magnetic and electrical characterizations highlight the improvement in magnetoelectric coupling of the BFO-CFO bulk heterojunction. A magnetoelectric coupling coefficient of 74 mV/cm·Oe of this bulk heterojunction is larger than the magnetoelectric coefficient reported earlier on flexible substrates. Therefore, this study delivers a viable route of fabricating a remarkable magnetoelectric heterojunction and yet flexible electronic devices that are robust against extreme conditions with optimized performance.

Heteroepitaxy of Fe3O4/Muscovite: A New Perspective for Flexible Spintronics.

Spintronics has captured a lot of attention since it was proposed. It has been triggering numerous research groups to make their efforts on pursuing spin-related electronic devices. Recently, flexible and wearable devices are in a high demand due to their outstanding potential in practical applications. In order to introduce spintronics into the realm of flexible devices, we demonstrate that it is feasible to grow epitaxial Fe3O4 film, a promising candidate for realizing spintronic devices based on tunneling magnetoresistance, on flexible muscovite. In this study, the heteroepitaxy of Fe3O4/muscovite is characterized by X-ray diffraction, high-resolution transmission electron microscopy, and Raman spectroscopy. The chemical composition and magnetic feature are investigated by a combination of X-ray photoelectron spectroscopy and X-ray magnetic circular dichroism. The electrical and magnetic properties are examined to show the preservation of the primitive properties of Fe3O4. Furthermore, various bending tests are performed to show the tunability of functionalities and to confirm that the heterostructures retain the physical properties under repeated cycles. These results illustrate that the Fe3O4/muscovite heterostructure can be a potential candidate for the applications in flexible spintronics.

Oxide Heteroepitaxy for Flexible Optoelectronics.

The emerging technological demands for flexible and transparent electronic devices have compelled researchers to look beyond the current silicon-based electronics. However, fabrication of devices on conventional flexible substrates with superior performance are constrained by the trade-off between processing temperature and device performance. Here, we propose an alternative strategy to circumvent this issue via the heteroepitaxial growth of transparent conducting oxides (TCO) on the flexible mica substrate with performance comparable to that of their rigid counterparts. With the examples of ITO and AZO as a case study, a strong emphasis is laid upon the growth of flexible yet epitaxial TCO relying muscovite's superior properties compared to those of conventional flexible substrates and its compatibility with the present fabrication methods. Besides excellent optoelectro-mechanical properties, an additional functionality of high-temperature stability, normally lacking in the current state-of-the-art transparent flexitronics, is provided by these heterostructures. These epitaxial TCO electrodes with good chemical and thermal stabilities as well as mechanical durability can significantly contribute to the field of flexible, light-weight, and portable smart electronics.

Tuning the magnetic properties of self-assembled BiFeO3-CoFe2O4 heteroepitaxy by magneto-structural coupling.

Magnetic and multiferroic nanocomposites with two distinct phases have been a topic of intense research for their profound potential applications in the field of spintronics. In addition to growing high-quality phase separated heteroepitaxial nanocomposites, the strain engineering that is conducive to enhance the tunability of material properties, in general, and the magnetic properties, in particular, is of utmost importance in exploring new possibilities. Here, we investigated the magneto-structural coupling between antiferromagnetic BiFeO3 (BFO) and ferrimagnetic CoFe2O4 (CFO) in self-assembled vertically aligned nanocomposites grown on LaAlO3 (LAO) and SrTiO3 (STO) substrates. We found that BFO exhibits tetragonal (T) and rhombohedral (R) structures as the stable phases and CFO has high magnetocrystalline anisotropy even in the form of nanocomposites. The temperature and magnetic field dependent magnetizations of T_BFO-CFO/LAO and R_BFO-CFO/STO nanocomposites primarily demonstrate the magnetoelastic coupling between these variants.