Synergism of polysaccharide polymers in antihistamine eye drops: Influence on physicochemical properties and in vivo efficacy.

The incorporation of polymers into drug delivery vehicles has been shown to be a useful approach to prolong the residence time of drugs in the precorneal tear film and to improve penetration into biological membranes. The main objective of this research was to formulate novel viscous eye drops with ketotifen as the active ingredient, containing the polysaccharides: chitosan (MCH), hydroxypropyl guar gum (HPG) and hyaluronic acid (SH) alone and in combination as functional polymers. DSC and FT-IR techniques showed the compatibility between ketotifen and polymers. Physicochemical and rheological analysis at ambient and simulated physiological conditions, as well as the evaluation of mucoadhesive properties showed that vehicles containing combinations of polymers have suitable physicochemical and functional properties with demonstrated synergism between combined polymers (MCH and HPG i.e. SH and HPG). The drug permeability was successfully estimated in vitro using HCE-T cell-based models. MTT cytotoxicity assay demonstrates that the tested formulations were non-toxic and well tolerated. In vivo preclinical study on mice revealed that both vehicles containing mixed polymers enhanced and prolonged the antipruritic/analgesic-like effect of ophthalmic ketotifen. Based on these results, both combinations of polysaccharide polymers, especially SH-HPG, could be considered as potential new carriers for ketotifen for ophthalmic use.

Quinoline-based thiazolyl-hydrazones target cancer cells through autophagy inhibition.

Heterocyclic pharmacophores such as thiazole and quinoline rings have a significant role in medicinal chemistry. They are considered privileged structures since they constitute several Food and Drug Administration (FDA)-approved drugs for cancer treatment. Herein, we report the synthesis, in silico evaluation of the ADMET profiles, and in vitro investigation of the anticancer activity of a series of novel thiazolyl-hydrazones based on the 8-quinoline (1a-c), 2-quinoline (2a-c), and 8-hydroxy-2-quinolyl moiety (3a-c). The panel of several human cancer cell lines and the nontumorigenic human embryonic kidney cell line HEK-293 were used to evaluate the compound-mediated in vitro anticancer activities, leading to [2-(2-(quinolyl-8-ol-2-ylmethylene)hydrazinyl)]-4-(4-methoxyphenyl)-1,3-thiazole (3c) as the most promising compound. The study revealed that 3c blocks the cell-cycle progression of a human colon cancer cell line (HCT-116) in the S phase and induces DNA double-strand breaks. Also, our findings demonstrate that 3c accumulates in lysosomes, ultimately leading to the cell death of the hepatocellular carcinoma cell line (Hep-G2) and HCT-116 cells, by the mechanism of autophagy inhibition.

Oxidative stress status assessment of rats' brains injury following subacute exposure to K-oximes.

Oxidative stress status and morphological injuries in the brain of Wistar rats induced by repeated application of selected acetylcholinesterase reactivators - asoxime, obidoxime, K027, K048, K074, and K075 were evaluated. Each oxime in a dose of 0.1 of LD50/kg im was given 2x/week for 4 weeks. Markers of lipid peroxidation (malondialdehyde, MDA), and protein oxidation (advanced oxidation protein products, AOPP), as well as the activity of antioxidant enzymes (catalase, CAT, superoxide dismutase, SOD, glutathione reductase, GR, and glutathione peroxidase, GPx), were estimated in the brain tissue homogenates on day 35 of the study. Brain alterations were carefully quantified by semiquantitative grading scales - brain damage score (BDS). Oxidative stress parameters, MDA and AOPP were significantly highest in the asoxime-, obidoxime- and K075-treated groups (p < 0.001). The activity of SOD and CAT was significantly elevated in the obidoxime-, K048-, and K075-treated groups (p < 0.001). Besides, GR was markedly decreased in the obidoxime- and K074-treated groups (p < 0.01), while treatment with K048, K074 and K075 induced extremely high elevation in GPx levels (p < 0.001). In the same groups of rats, brain alterations associated with polymorphonuclear cell infiltrate were significantly more severe than those observed in animals receiving only asoxime or K027 (p < 0.001). The presented results confirmed that treatment with different oximes significantly improved the oxidative status and attenuated signs of inflammation in rats' brains. Presented results, together with our previously published data can help to predict likely adverse systemic toxic effects, and target organ systems, which are crucial for establishing risk categories, as well as in dose selection of K-oximes as drug candidates.

Synthesis and Investigation of Anti-Inflammatory Activity of New Thiourea Derivatives of Naproxen.

The aim of the study was a synthesis and investigation of the dose-dependent anti-inflammatory effect of new thiourea derivatives of naproxen with selected aromatic amines and esters of aromatic amino acids. The results of the in vivo study indicate that derivatives of m-anisidine (4) and N-methyl tryptophan methyl ester (7) showed the most potent anti-inflammatory activity four hours after injection of carrageenan, with the percentage of inhibition of 54.01% and 54.12%, respectively. In vitro assays of COX-2 inhibition demonstrated that none of the tested compounds achieved 50% inhibition at concentrations lower than 100 µM. On the other hand, the aromatic amine derivatives (1-5) accomplished significant inhibition of 5-LOX, and the lowest IC50 value was observed for compound 4 (0.30 µM). High anti-edematous activity of compound 4 in the rat paw edema model, together with potent inhibition of 5-LOX, highlight this compound as a promising anti-inflammatory agent.

Discovery of Novel Thiophene/Hydrazones: In Vitro and In Silico Studies against Pancreatic Cancer.

Cancer is the disease with the highest mortality. Drug studies contribute to promising treatments; however there is an urgent need for selective drug candidates. Pancreatic cancer is difficult to treat and the cancer progresses rapidly. Unfortunately, current treatments are ineffective. In this study, ten new diarylthiophene-2-carbohydrazide derivatives were synthesized and evaluated for their pharmacological activity. The 2D and 3D anticancer activity studies suggested the compounds 7a, 7d, and 7f were promising. Among these, 7f (4.86 µM) showed the best 2D inhibitory activity against PaCa-2 cells. Compounds 7a, 7d and 7f were also tested for their cytotoxic effects on healthy cell line but only compound 7d showed selectivity. Compounds 7a, 7d, and 7f showed the best 3D cell line inhibitory effect according to spheroid diameters. The compounds were screened for their COX-2 and 5-LOX inhibitory activity. For COX-2, the best IC50 value was observed for 7c (10.13 µM) and all compounds showed significantly lower inhibition compared to standard. In the 5-LOX inhibition study, compounds 7a (3.78 µM), 7c (2.60 µM), 7e (3.3 µM), and 7f (2.94 µM) demonstrated influential activity compared to standard. Regarding molecular docking studies, binding mode of compounds 7c, 7e, and 7f to the 5-LOX enzyme were non-redox or redox types, but not the iron-binding type. As dual inhibitors of 5-LOX and pancreatic cancer cell line, 7a and 7f were identified as the most promising compounds.

Synthesis, Evaluation of Enzyme Inhibition and Redox Properties of Potential Dual COX-2 and 5-LOX Inhibitors.

Various dual inhibitors of COX-2 and 5-LOX enzymes have been developed so far in order to obtain more effective and safer anti-inflammatory drugs. The aim of this study was to design and synthesize new dual COX-2 and 5-LOX inhibitors, and to evaluate their enzyme inhibition potential and redox properties. Thirteen compounds (1-13) were designed taking into account structural requirements for dual COX-2 and 5-LOX inhibition and antioxidant activity, synthesized, and structurally characterized. These compounds can be classified as N-hydroxyurea derivatives (1, 2 and 3), 3,5-di-tert-butylphenol derivatives (4, 5, 6, 7 and 13), urea derivatives (8, 9 and 10) and "type B hydroxamic acids" (11 and 12). COX-1, COX-2 and 5-LOX inhibitory activities were evaluated using fluorometric inhibitor screening kits. The evaluation of the redox activity of newly synthesized compounds was performed in vitro in the human serum pool using redox status tests. The prooxidative score, the antioxidative score and the oxy-score were calculated. Seven out of thirteen synthesized compounds (1, 2, 3, 5, 6, 11 and 12) proved to be dual COX-2 and 5-LOX inhibitors. These compounds expressed good COX-2/COX-1 selectivity. Moreover, dual inhibitors 1, 3, 5, 11 and 12 showed good antioxidant properties.

Can Zeolite-Supporting Acridines Boost Their Anticancer Performance?

Acridine and its derivatives (9-chloroacridine and 9-aminoacridine) are investigated here, supported on FAU type zeolite Y, as a delivery system of anticancer agents. FTIR/Raman spectroscopy and electron microscopy revealed successful drug loading on the zeolite surface, while spectrofluorimetry was employed for drug quantification. The effects of the tested compounds on cell viability were evaluated using in vitro methylthiazol-tetrazolium (MTT) colorimetric technique against human colorectal carcinoma (cell line HCT-116) and MRC-5 fibroblasts. Zeolite structure remained unchanged during homogeneous drug impregnation with achieved drug loadings in the 18-21 mg/g range. The highest drug release, in the µM concentration range, with favourable kinetics was established for zeolite-supported 9-aminoacridine. The acridine delivery via zeolite carrier is viewed in terms of solvation energy and zeolite adsorption sites. The cytotoxic effect of supported acridines on HCT-116 cells reveals that the zeolite carrier improves toxicity, while the highest efficiency is displayed by zeolite-impregnated 9-aminoacridine. The 9-aminoacridine delivery via zeolite carrier favours healthy tissue preservation while accompanying increased toxicity toward cancer cells. Cytotoxicity results are well correlated with theoretical modelling and release study, providing promising results for applicative purposes.

High amount of lecithin facilitates oral delivery of a poorly soluble pyrazoloquinolinone ligand formulated in lipid nanoparticles: Physicochemical, structural and pharmacokinetic performances.

Preclinical development of deuterated pyrazoloquinolinone ligands, promising drug candidates for various neuropsychiatric disorders, was hindered by unusually low solubility in water and oils. DK-I-60-3 (7-methoxy-d3-2-(4-methoxy-d3-phenyl)-2,5-dihydro-3Hpyrazolo[4,3-c]quinolin-3-one) is one of such pyrazoloquinolinones, and we recently reported about increased oral bioavailability of its nanocrystal formulation (NC). Lipid nanoparticles (LNP) with a high concentration of lecithin, which enhances loading capacity of the lipid matrix, may give rise to further improvement. After preformulation studies by differential scanning calorimetry and polarized light microscopy, LNP were prepared by the hot high pressure homogenization, and characterized in terms of particle size, morphology, and encapsulation efficacy. The layered structure visible on atomic force micrographs was confirmed by nuclear magnetic resonance. Obtained formulations were desirably stable, with small particle size (<100 nm), and high encapsulation efficacy (>99 %). Lecithin was partially fluid and most probably located in the outer shell of the particle, together with DK-I-60-3. While the hydrophobic part of polysorbate 80 was completely immobilized, its hydrophilic part was free in the aqueous phase. In oral neuropharmacokinetic study in rats, an around 1.5-fold increase of area under the curve with LNP compared to NC was noticed both in brain and plasma. In bioavailability study, F value of LNP (34.7 ± 12.4 %) was 1.4-fold higher than of NC (24.5 ± 7.8 %); however, this difference did not reach statistical significance. Therefore, employment of LNP platform in preclinical formulation of DK-I-60-3 imparted an incremental improvement of its physicochemical as well as pharmacokinetic behavior.

Square wave voltammetric study of interaction between 9-acridinyl amino acid derivatives and DNA.

Electrochemical oxidation of newly synthesized acridine derivatives (ADs): PG, PA, EG and EA was studied using square wave voltammetry at a glassy carbon electrode. Oxidation occurs as an irreversible process for all ADs. The ADs interaction with DNA was investigated using multi-layer DNA electrochemical biosensor. The shift of dA peak in positive direction indicated that the type of interaction is most likely an intercalation. PG showed the widest range of concentration capable to interact with DNA (1 × 10-7 M - 2.5 × 10-4 M). Analysing logIcomplexIDNA-IcomplexvslogcAD plots, the binding constants were determined. For the lowest PG concentrations, obtained K value close to 106 M-1 refers to strong binding. The values of K for PA may be classified as medium strength, while EG and EA showed low K values. Our results unequivocally showed that the characteristics of association complexes may vary depending on the concentration of the interacting substance. The negative ΔG value for all ADs, (- 21 to - 34 kJ mol-1), confirms the process spontaneity. The best result, indicating the most stable formed complex with DNA adsorbed at the electrode surface, showed PG when present in low concentration, order of 10-7 M. The intercalation of ADs into DNA was supported by molecular docking analysis.

Synthesis, Characterization, and Investigation of Anti-Inflammatory and Cytotoxic Activities of Novel Thiourea Derivatives of Naproxen.

The objective of this study was to synthesize seven novel thiourea derivatives of naproxen (8-14), examine the anti-inflammatory activity of the newly synthesized compounds, investigate the cytotoxic potential of both sets of synthesized compounds (1-7 and 8-14), and select the most promising anti-inflammatory and antitumor drug candidates. The results of the in vivo anti-inflammatory study clearly showed that compounds 8 and 9 were capable of decreasing paw edema, as evident from a high percentage of inhibition (44.83% and 49.29%, respectively). In addition, the results of in vitro enzyme inhibition assays demonstrated that neither of the newly synthesized compounds reached 50% inhibition of 5-LOX at concentrations lower than 100 µM. In terms of antitumor potential, derivatives 3 and 8 exhibited strong cytotoxic effects on the HeLa cell line, suggesting the involvement of the extrinsic pathway of apoptosis. According to the overall results obtained for both sets of synthesized molecules, derivatives 4 and 8 can be underlined as molecules with the strongest anti-inflammatory activity, while derivatives 3 and 8 are the most promising cytotoxic agents.

Evaluation of chitosan/xanthan gum polyelectrolyte complexes potential for pH-dependent oral delivery of escin.

Escin is an amphiphilic and weakly acidic drug that oral administration may lead to the irritation of gastric mucosa. The entrapment of escin into chitosan (CH)/xanthan gum (XG)-based polyelectrolyte complexes (PECs) can facilitate controlled drug release which may be beneficial for the reduction of its side effects. This study aimed to investigate the influence of escin content and drying method on the formation, physicochemical, and controlled, pH-dependent drug release properties of CH/XG-based PECs. Measurements of transmittance, conductivity, and rheological characterization confirmed the formation of CH/XG-based PECs with escin entrapped at escin-to-polymers mass ratios 1:1, 1:2, and 1:4. Ambient-dried PECs had higher yield, entrapment efficiency, and escin content in comparison with spray-dried ones. FT-IR spectra confirmed the interactions between CH, XG, and escin, which were stronger in ambient-dried PECs. PXRD and DSC analyses showed the amorphous escin character in all dry PECs, regardless of the drying method. The most promising controlled and pH-dependent in vitro escin release was from the ambient-dried PEC at the escin-to-polymers mass ratio of 1:1. For that reason and due to the highest yield and entrapment efficiency, this carrier has the potential to prevent the irritation of gastric mucosa after oral administration of escin.

Comparative Assessment of In Vitro and In Silico Methods for Aerodynamic Characterization of Powders for Inhalation.

In vitro assessment of dry powders for inhalation (DPIs) aerodynamic performance is an inevitable test in DPI development. However, contemporary trends in drug development also implicate the use of in silico methods, e.g., computational fluid dynamics (CFD) coupled with discrete phase modeling (DPM). The aim of this study was to compare the designed CFD-DPM outcomes with the results of three in vitro methods for aerodynamic assessment of solid lipid microparticle DPIs. The model was able to simulate particle-to-wall sticking and estimate fractions of particles that stick or bounce off the inhaler's wall; however, we observed notable differences between the in silico and in vitro results. The predicted emitted fractions (EFs) were comparable to the in vitro determined EFs, whereas the predicted fine particle fractions (FPFs) were generally lower than the corresponding in vitro values. In addition, CFD-DPM predicted higher mass median aerodynamic diameter (MMAD) in comparison to the in vitro values. The outcomes of different in vitro methods also diverged, implying that these methods are not interchangeable. Overall, our results support the utility of CFD-DPM in the DPI development, but highlight the need for additional improvements in these models to capture all the key processes influencing aerodynamic performance of specific DPIs.

Overcoming the Low Oral Bioavailability of Deuterated Pyrazoloquinolinone Ligand DK-I-60-3 by Nanonization: A Knowledge-Based Approach.

Poor water solubility of new chemical entities is considered as one of the main obstacles in drug development, as it usually leads to low bioavailability after administration. To overcome these problems, the selection of the appropriate formulation technology needs to be based on the physicochemical properties of the drug and introduced in the early stages of drug research. One example of the new potential drug substance with poor solubility is DK-I-60-3, deuterated pyrazoloquinolinone, designed for the treatment of various neuropsychiatric disorders. In this research, based on preformulation studies, nanocrystal technology was chosen to improve the oral bioavailability of DK-I-60-3. Nanocrystal dispersions stabilized by sodium lauryl sulfate and polyvinylpyrrolidone were prepared by modified wet media milling technique, with the selection of appropriate process and formulation parameters. The nanoparticles characterization included particle size and zeta potential measurements, differential scanning calorimetry, X-ray powder diffraction, dissolution and solubility study, and in vivo pharmacokinetic experiments. Developed formulations had small uniform particle sizes and were stable for three months. Nanonization caused decreased crystallite size and induced crystal defects formation, as well as a DK-I-60-3 solubility increase. Furthermore, after oral administration of the developed formulations in rats, two to three-fold bioavailability enhancement was observed in plasma and investigated organs, including the brain.

Comparative efficacy evaluation of different penetration enhancement strategies for dermal delivery of poorly soluble drugs - A case with sertaconazole nitrate.

The aim of this study was to compare the efficacy of different approaches for enhancement of dermal availability of the highly lipophilic antifungal model drug - sertaconazole nitrate (SN). For this purpose, a physical penetration enhancer - dissolving microneedles (MNs) was fabricated by filling moulds with liquid formulation based on polyvinylpyrrolidone and loaded with SN. Dissolving MNs were characterised regarding their morphological and mechanical characteristics. A penetration enhancement efficacy of MNs was evaluated in vitro using porcine ear skin in parallel with the efficacy of formerly developed chemical penetration enhancer - biocompatible microemulsion (ME) formulation. Moreover, an ability of solid silicon MNs to significantly improve delivery of SN from ME into the skin has also been investigated. The obtained results showed that dissolving MNs had satisfying morphological properties and mechanical strength. This type of MNs provided comparable drug deposition in the skin as ME formulation, but also revealed an indication of percutaneous absorption of a portion of the administered drug dose. However, the penetration/permeation study results were largely influenced by experimental setup and dosing regimen. Although solid silicon MNs assisted SN dermal delivery led to increase of drug cutaneous retention (1.9-fold) under infinite dosing regimen, the synergistic action of solid MNs and ME applied under finite dosing was more pronounced in comparison with the application either of physical (dissolving MNs) or chemical enhancer (ME) alone. Namely, SN amount accumulated into the skin increased up to 4.67 and 4.37 folds in comparison with ME and dissolving MNs alone, respectively, while reaching a significant decrease in drug permeation through the skin compared to the use of dissolving MNs. Application of ME per se was the only approach that provided selective in vitro dermal drug delivery without SN permeation across the skin. However, despite both types of the used MNs lead to SN permeation in vitro, the ratio between the drug amount deposited in the skin and SN content permeated was significantly higher for the combined approach (12.05) than for dissolving MNs (2.10). Therefore, a combination of solid silicon MNs and biocompatible ME favoured more pronouncedly SN skin accumulation, which is preferable in the treatment of skin fungal infections.

Formulation of olopatadine hydrochloride viscous eye drops - physicochemical, biopharmaceutical and efficacy assessment using in vitro and in vivo approaches.

The aim of this work was the formulation and the comprehensive evaluation of the viscous eye drops using vehicles containing medium chain chitosan (0.5% w/v), hydroxypropyl guar gum (0.25% w/v) and their combination as carriers for olopatadine (0.1% w/v). Physicochemical properties (appearance, clarity, pH, osmolality, viscosity and drug content) of the tested formulations were within acceptable ranges for the ophthalmic preparations, while DSC and FT-IR techniques demonstrated the compatibility between olopatadine and polymers. The drug permeability was successfully estimated in vitro using both HCE-T cell-based models (Model I and Model II) and the parallel artificial membrane permeability assay (PAMPA), considering the impact of chitosan as a permeation enhancer. The MTT cytotoxicity assay demonstrates that the tested formulations (diluted 10-fold in HBSS pH 5.5) were non-toxic and well tolerated. An ocular itch test on mice was carried out with the formulation containing the combination of polymers comparable with a commercially available olopatadine eye drops without viscosity enhancers. The tested eye drops produced a slightly higher anti-pruritic/analgesic-like effect than the commercial preparation. It could be assumed that the use of this viscous ophthalmic vehicle due to its advanced mucoadhesive properties and good safety profile is a feasible strategy to improve the efficacy of olopatadine.

Biological Evaluation of Oil-in-Water Microemulsions as Carriers of Benzothiophene Analogues for Dermal Applications.

During the last decade, many studies have been reported on the design and formulation of novel drug delivery systems proposed for dermal or transdermal administration. The efforts focus on the development of biocompatible nanodispersions that can be delivered to the skin and treat severe skin disorders, including cancer. In this context, oil-in-water (O/W) microemulsions have been developed to encapsulate and deliver lipophilic bioactive molecules for dermal application. An O/W biocompatible microemulsion composed of PBS buffer, Tween 80, and triacetin was assessed for its efficacy as a drug carrier of DPS-2, a lead compound, initially designed in-house to inhibit BRAFV600E oncogenic kinase. The system was evaluated through both in vitro and ex vivo approaches. The cytotoxic effect, in the presence and absence of DPS-2, was examined through the thiazolyl blue tetrazolium bromide (MTT) cell proliferation assay using various cell lines. Further investigation through Western blotting revealed that cells died of necrosis. Porcine ear skin was used as a skin model to evaluate the degree of permeation of DPS-2 through skin and assess its retention. Through the ex vivo experiments, it was clarified that encapsulated DPS-2 was distributed within the full thickness of the stratum corneum (SC) and had a high affinity to hair follicles.

Development of solid lipid microparticles by melt-emulsification/spray-drying processes as carriers for pulmonary drug delivery.

The aim of this study was to optimize the parameters of the complex melt-emulsification process coupled with the spray-drying, in order to maintain the balance between solid lipid microparticles (SLMs) powders aerodynamic performance and salbutamol sulfate release rate. Quality target product profile was identified and risk management and principal component analysis were used to guide formulation development. Obtained dry powders for inhalation (DPIs) were evaluated in terms of SLMs size distribution, morphology, true density, drug content, solid state characterization studies, in vitro aerosol performance and in vitro drug release. SLMs micrographs indicated spherical, porous particles. Selected powders showed satisfactory aerosol performance with a mean mass aerodynamic diameter of around 3 µm and acceptable fine particle fraction (FPF). Addition of trehalose positively affected SLMs aerodynamic properties. The results of in vitro dissolution testing indicated that salbutamol sulfate release from the tested SLMs formulations was modified, in comparison to the raw drug release. In conclusion, SLMs in a form of DPIs were successfully developed and numerous factors that affects SLMs properties were identified in this study. Further research is required for full understanding of each factor's influence on SLMs properties and optimization of DPIs with maximized FPFs.

Effect of ibuprofen entrapment procedure on physicochemical and controlled drug release performances of chitosan/xanthan gum polyelectrolyte complexes.

The effect of the entrapment procedure of a poorly water soluble drug (ibuprofen) on physicochemical and drug release performances of chitosan/xanthan polyelectrolyte complexes (PECs) was investigated to achieve controlled drug release as the ultimate goal. The formation of PECs for two drug entrapment procedures (before or after the mixing of polymers) at pH 4.6 and 5.6 and three chitosan-to-xanthan mass ratios (1:1, 1:2 and 1:3) was observed by continuous decrease in conductivity during the PECs formation and increased apparent viscosity and hysteresis values. The most extensive crosslinking was observed with ibuprofen added before the PECs formation at pH 4.6 and chitosan-to-xanthan mass ratio 1:1. The PECs prepared at polymers' mass ratios 1:2 and 1:3 had higher yield and drug entrapment efficiency. DSC and FT-IR analysis confirmed ibuprofen entrapment in PECs and the partial disruption of its crystallinity. All ibuprofen release profiles were similar, with 60-70% of drug released after 12 h, mainly by diffusion, but erosion and polymer chain relaxation were also included. Potentially optimal can be considered the PEC prepared at pH 4.6, ibuprofen entrapped before the mixing of polymers at chitosan-to-xanthan mass ratio 1:2, which provided controlled drug release by zero-order kinetics, high yield, and drug entrapment efficiency.

Nanocrystal dispersion of DK-I-56-1, a poorly soluble pyrazoloquinolinone positive modulator of α6 GABAA receptors: Formulation approach toward improved in vivo performance.

DK-I-56-1 (7­methoxy­2-(4­methoxy­d3-phenyl)-2,5-dihydro-3H-pyrazolo[4,3-c]quinolin-3-one), a recently developed deuterated pyrazoloquinolinone, has been recognized as a lead candidate for treatment of various neuropsychiatric disorders. During preclinical investigation of poorly water-soluble compounds such as DK-I-56-1, the application of nanotechnology could be advantageous due to improved safety and possibly increased bioavailability of nanosized formulation. DK-I-56-1 nanosuspensions stabilized by polysorbate 80, alone or in combination with poloxamers 188 i.e. 407 or d-α-tocopheryl polyethylene glycol 1000 succinate, were prepared using a small-scale media milling device. With particle size 208.7-250.6 nm and polydispersity index <0.250, selected nanodiseprsions were stable for three weeks. Pharmacokinetic and biodistribution studies following intraperitoneal administration of three types of formulation in mice indicated high plasma DK-I-56-1 levels after solution (10,228.6 ±â€¯1037.2 ngh/ml) and nanosuspension (6770.4 ±â€¯770.7 ngh/ml) but not suspension administration (966.0 ±â€¯58.1 ngh/ml). However, distribution of DK-I-56-1 after solution was heavily influenced by its composition, and brain availability of nanosuspension was superior to that of solution formulation. In spontaneous locomotor activity test, the expected hyperlocomotor effect was observed after nanosuspension administration, without compromising impact of the vehicle/excipients used. Therefore, nanonization of drug compound assembled with proper selection of stabilizers may seemingly contribute further thorough testing of DK-I-56-1 preclinical efficacy.

An electrochemical study of 9-chloroacridine redox behavior and its interaction with double-stranded DNA.

The electrochemical behavior of 9-chloroacridine (9Cl-A), a precursor molecule for synthesis of acridine derivatives with cytostatic activity, is a complex, pH-dependent, diffusion-controlled irreversible process. Oxidation of 9Cl-A initiates with the formation of a cation radical monomer, continues via the formation of a dimer subsequent oxidation to new cation radical. Reduction of 9Cl-A produces radical monomers which are stabilized by dimer formation. The investigation was performed using cyclic, differential pulse and square wave voltammetry at a glassy carbon electrode. The interaction between 9Cl-A and double-stranded DNA (dsDNA) was investigated using a multilayer dsDNA-electrochemical biosensor and 9Cl-A solutions from 1.0×10-7M (the lowest 9Cl-A concentration whose interaction with DNA was possible to detect) up to 1×10-4M. These allowed the binding constant, K=3.45×105M-1 and change in Gibbs free energy of the formed adsorbed complex to be calculated. Complex formation was a spontaneous process proceeding via 9Cl-A intercalation into dsDNA inducing structural changes. The intercalation of 9Cl-A into dsDNA was supported by molecular docking analysis. The combination of simple methodology and the use of biosensors to investigate DNA interactions is a powerful tool to offer insight into aspects of drug design during pharmaceutical development.