Transforming carbon dioxide into jet fuel using an organic combustion-synthesized Fe-Mn-K catalyst.

With mounting concerns over climate change, the utilisation or conversion of carbon dioxide into sustainable, synthetic hydrocarbons fuels, most notably for transportation purposes, continues to attract worldwide interest. This is particularly true in the search for sustainable or renewable aviation fuels. These offer considerable potential since, instead of consuming fossil crude oil, the fuels are produced from carbon dioxide using sustainable renewable hydrogen and energy. We report here a synthetic protocol to the fixation of carbon dioxide by converting it directly into aviation jet fuel using novel, inexpensive iron-based catalysts. We prepare the Fe-Mn-K catalyst by the so-called Organic Combustion Method, and the catalyst shows a carbon dioxide conversion through hydrogenation to hydrocarbons in the aviation jet fuel range of 38.2%, with a yield of 17.2%, and a selectivity of 47.8%, and with an attendant low carbon monoxide (5.6%) and methane selectivity (10.4%). The conversion reaction also produces light olefins ethylene, propylene, and butenes, totalling a yield of 8.7%, which are important raw materials for the petrochemical industry and are presently also only obtained from fossil crude oil. As this carbon dioxide is extracted from air, and re-emitted from jet fuels when combusted in flight, the overall effect is a carbon-neutral fuel. This contrasts with jet fuels produced from hydrocarbon fossil sources where the combustion process unlocks the fossil carbon and places it into the atmosphere, in longevity, as aerial carbon - carbon dioxide.

Spin-enhanced nanodiamond biosensing for ultrasensitive diagnostics.

The quantum spin properties of nitrogen-vacancy defects in diamond enable diverse applications in quantum computing and communications1. However, fluorescent nanodiamonds also have attractive properties for in vitro biosensing, including brightness2, low cost3 and selective manipulation of their emission4. Nanoparticle-based biosensors are essential for the early detection of disease, but they often lack the required sensitivity. Here we investigate fluorescent nanodiamonds as an ultrasensitive label for in vitro diagnostics, using a microwave field to modulate emission intensity5 and frequency-domain analysis6 to separate the signal from background autofluorescence7, which typically limits sensitivity. Focusing on the widely used, low-cost lateral flow format as an exemplar, we achieve a detection limit of 8.2 × 10-19 molar for a biotin-avidin model, 105 times more sensitive than that obtained using gold nanoparticles. Single-copy detection of HIV-1 RNA can be achieved with the addition of a 10-minute isothermal amplification step, and is further demonstrated using a clinical plasma sample with an extraction step. This ultrasensitive quantum diagnostics platform is applicable to numerous diagnostic test formats and diseases, and has the potential to transform early diagnosis of disease for the benefit of patients and populations.

Decarbonising energy: The developing international activity in hydrogen technologies and fuel cells.

Hydrogen technologies and fuel cells offer an alternative and improved solution for a decarbonised energy future. Fuel cells are electrochemical converters; transforming hydrogen (or energy sources containing hydrogen) and oxygen directly into electricity. The hydrogen fuel cell, invented in 1839, permits the generation of electrical energy with high efficiency through a non-combustion, electrochemical process and, importantly, without the emission of CO2 at its point of use. Hitherto, despite numerous efforts to exploit the obvious attractions of hydrogen technologies and hydrogen fuel cells, various challenges have been encountered, some of which are reviewed here. Now, however, given the exigent need to urgently seek low-carbon paths for humankind's energy future, numerous countries are advancing the deployment of hydrogen technologies and hydrogen fuel cells not only for transport, but also as a means of the storage of excess renewable energy from, for example, wind and solar farms. Furthermore, hydrogen is also being blended into the natural gas supplies used in domestic heating and targeted in the decarbonisation of critical, large-scale industrial processes such as steel making. We briefly review specific examples in countries such as Japan, South Korea and the People's Republic of China, as well as selected examples from Europe and North America in the utilization of hydrogen technologies and hydrogen fuel cells.

Hydrophobin-Encapsulated Quantum Dots.

The phase transfer of quantum dots to water is an important aspect of preparing nanomaterials that are suitable for biological applications, and although numerous reports describe ligand exchange, very few describe efficient ligand encapsulation techniques. In this report, we not only report a new method of phase transferring quantum dots (QDs) using an amphiphilic protein (hydrophobin) but also describe the advantages of using a biological molecule with available functional groups and their use in imaging cancer cells in vivo and other imaging applications.

Probabilistic modelling of prospective environmental concentrations of gold nanoparticles from medical applications as a basis for risk assessment.

BACKGROUND: The use of gold nanoparticles (Au-NP) based medical applications is rising due to their unique physical and chemical properties. Diagnostic devices based on Au-NP are already available in the market or are in clinical trials and Au-NP based therapeutics and theranostics (combined diagnostic and treatment modality) are in the research and development phase. Currently, no information on Au-NP consumption, material flows to and concentrations in the environment are available. Therefore, we estimated prospective maximal consumption of Au-NP from medical applications in the UK and US. We then modelled the Au-NP flows post-use and predicted their environmental concentrations. Furthermore, we assessed the environment risks of Au-NP by comparing the predicted environmental concentrations (PECs) with ecological threshold (PNEC) values. RESULTS: The mean annual estimated consumption of Au-NP from medical applications is 540 kg for the UK and 2700 kg for the US. Among the modelled concentrations of Au-NP in environmental compartments, the mean annual PEC of Au-NP in sludge for both the UK and US was estimated at 124 and 145 µg kg(-1), respectively. The mean PEC in surface water was estimated at 468 and 4.7 pg L(-1), respectively for the UK and US. The NOEC value for the water compartment ranged from 0.12 up to 26,800 µg L(-1), with most values in the range of 1000 µg L(-1). CONCLUSION: The results using the current set of data indicate that the environmental risk from Au-NP used in nanomedicine in surface waters and from agricultural use of biosolids is minimal in the near future, especially because we have used a worst-case use assessment. More Au-NP toxicity studies are needed for the soil compartment.

Potential environmental implications of nano-enabled medical applications: critical review.

The application of nanotechnology and nanoscience for medical purposes is anticipated to make significant contributions to enhance human health in the coming decades. However, the possible future mass production and use of these medical innovations exhibiting novel and multifunctional properties will very likely lead to discharges into the environment giving rise to potentially new environmental hazards and risks. To date, the sources, the release form and environmental fate and exposure of nano-enabled medical products have not been investigated and little or no data exists, although there are a small number of currently approved medical applications and a number in clinical trials. This paper discusses the current technological and regulatory landscape and potential hazards and risks to the environment of nano-enabled medical products, data gaps and gives tentative suggestions relating to possible environmental hotspots.

In vivo demonstration of enhanced radiotherapy using rare earth doped titania nanoparticles.

Radiation therapy is often limited by damage to healthy tissue and associated side-effects; restricting radiation to ineffective doses. Preferential incorporation of materials into tumour tissue can enhance the effect of radiation. Titania has precedent for use in photodynamic therapy (PDT), generating reactive oxygen species (ROS) upon photoexcitation, but is limited by the penetration depth of UV light. Optimization of a nanomaterial for interaction with X-rays could be used for deep tumour treatment. As such, titania nanoparticles were doped with gadolinium to optimize the localized energy absorption from a conventional medical X-ray, and further optimized by the addition of other rare earth (RE) elements. These elements were selected due to their large X-ray photon interaction cross-section, and potential for integration into the titania crystal structure. Specific activation of the nanoparticles by X-ray can result in generation of ROS leading to cell death in a tumour-localized manner. We show here that intratumoural injection of RE doped titania nanoparticles can enhance the efficacy of radiotherapy in vivo.

Synthesis of semiconductor nanoparticles.

Here, we describe typical methods and provide detailed experimental protocols for synthesizing and processing various semiconductor nanoparticles which have potential application in biology and medicine. These include synthesis of binary semiconductor nanoparticles; core@shell nanoparticles and alloyed nanoparticles; size-selective precipitation to obtain monodisperse nanoparticles; and strategies for phase transfer of nanoparticles from organic solution to aqueous media.

Nanoparticle augmented radiation treatment decreases cancer cell proliferation.

We report significant and controlled cell death using novel x-ray-activatable titania nanoparticles (NPs) doped with lanthanides. Preferential incorporation of such materials into tumor tissue can enhance the effect of radiation therapy. Herein, the incorporation of gadolinium into the NPs is designed to optimize localized energy absorption from a conventional medical x-ray. This result is further optimized by the addition of other rare earth elements. Upon irradiation, energy is transferred to the titania crystal structure, resulting in the generation of reactive oxygen species (ROS). FROM THE CLINICAL EDITOR: The authors report significant and controlled cell death using x-ray-activated titania nanoparticles doped with lanthanides as enhancers. Upon irradiation X-ray energy is transferred to the titania crystal structure, resulting in the generation of reactive oxygen species.

Sizing and phenotyping of cellular vesicles using Nanoparticle Tracking Analysis.

Cellular microvesicles and nanovesicles (exosomes) are involved in many disease processes and have major potential as biomarkers. However, developments in this area are constrained by limitations in the technology available for their measurement. Here we report on the use of fluorescence nanoparticle tracking analysis (NTA) to rapidly size and phenotype cellular vesicles. In this system vesicles are visualized by light scattering using a light microscope. A video is taken, and the NTA software tracks the brownian motion of individual vesicles and calculates their size and total concentration. Using human placental vesicles and plasma, we have demonstrated that NTA can measure cellular vesicles as small as ≈ 50 nm and is far more sensitive than conventional flow cytometry (lower limit ≈ 300 nm). By combining NTA with fluorescence measurement we have demonstrated that vesicles can be labeled with specific antibody-conjugated quantum dots, allowing their phenotype to be determined. FROM THE CLINICAL EDITOR: The authors of this study utilized fluorescence nanoparticle tracking analysis (NTA) to rapidly size and phenotype cellular vesicles, demonstrating that NTA is far more sensitive than conventional flow cytometry.

The role of nanomaterials in redox-based supercapacitors for next generation energy storage devices.

The development of more efficient electrical storage is a pressing requirement to meet future societal and environmental needs. This demand for more sustainable, efficient energy storage has provoked a renewed scientific and commercial interest in advanced capacitor designs in which the suite of experimental techniques and ideas that comprise nanotechnology are playing a critical role. Capacitors can be charged and discharged quickly and are one of the primary building blocks of many types of electrical circuit, from microprocessors to large-sale power supplies, but usually have relatively low energy storage capability when compared with batteries. The application of nanostructured materials with bespoke morphologies and properties to electrochemical supercapacitors is being intensively studied in order to provide enhanced energy density without comprising their inherent high power density and excellent cyclability. In particular, electrode materials that exploit physical adsorption or redox reactions of electrolyte ions are foreseen to bridge the performance disparity between batteries with high energy density and capacitors with high power density. In this review, we present some of the novel nanomaterial systems applied for electrochemical supercapacitors and show how material morphology, chemistry and physical properties are being tailored to provide enhanced electrochemical supercapacitor performance.

Potential environmental influence of amino acids on the behavior of ZnO nanoparticles.

The fate of nanomaterials when they enter the environment is an issue of increasing concern and thus it is important to know how they interact with natural organic molecules since this may have a significant impact on the particles' behavior. Because of our poor knowledge in this regard, the interaction of ZnO nanoparticles with amino acids of contrasting surface charge, including Histidine (HIS), Glycine (GLY), Aspartic acid (ASP) and Glutamic acid (GLU) which occur commonly in natural habitats, such as the plant root zone, was investigated over a range of pH conditions and concentrations. The addition of the individual amino acid led to significant changes in nanoparticle colloidal zeta potential stability, particle size distribution and the extent of agglomeration. Variations in pH resulted in considerable changes in nanoparticle surface charge and hydrodynamic size. In general, the particle size distribution decreased as the amino acid concentration increased, with more acidic conditions exacerbating this effect. In addition, increased concentrations of amino acids resulted in more stable nanoparticles in aqueous suspensions. Histidine had the greatest effect on colloidal stability, followed by Glycine, Aspartic acid and finally Glutamic acid. This study illustrates how nanoparticle behavior may change in the presence of naturally occurring amino acids, an important consideration when assessing the fate of nanoparticles in the environment. Additionally, utilization of amino acids in industrial processes could reduce particle agglomeration and it could lead to a way of employing more sustainable reagents.

Trafficking of a dual-modality magnetic resonance and fluorescence imaging superparamagnetic iron oxide-based nanoprobe to lymph nodes.

PURPOSE: This study aims to develop and characterize the trafficking of a dual-modal agent that identifies primary draining or sentinel lymph node (LN). PROCEDURE: Herein, a dual-reporting silica-coated iron oxide nanoparticle (SCION) is developed. Nude mice were imaged by magnetic resonance (MR) and optical imaging and axillary LNs were harvested for histological analysis. Trafficking through lymphatics was observed with intravital and ex vivo confocal microscopy of popliteal LNs in B6-albino, CD11c-EYFP, and lys-EGFP transgenic mice. RESULTS: In vivo, SCION allows visualization of LNs. The particle's size and surface functionality play a role in its passive migration from the intradermal injection site and its minimal uptake by CD11c+ dendritic cells and CD169+ and lys+ macrophages. CONCLUSIONS: After injection, SCION passively migrates to LNs without macrophage uptake and then can be used to image LN(s) by MRI and fluorescence. Thus, SCION can potentially be developed for use in sentinel node resections or for intralymphatic drug delivery.

Bacterial tactic response to silver nanoparticles.

In this study, we investigated the tactic response of Pseudomonas putida G7, a representative soil bacterium, towards silver nanoparticles (AgNPs). The study integrated the characterization of surface area and size distribution of AgNPs, toxicity determinations, based on ATP production, and assessment of the repellent reaction by means of an inverted capillary assay ('chemical-in-pond' method), and changes in the motility behaviour determined by computer-assisted motion analysis. Our data demonstrate, for the first time, that nanoparticles can elicit a negative tactic response in bacteria at low but environmentally relevant, sublethal concentrations. Data obtained by the chemical-in-pond method indicated that cells exposed to 0.1 mg l(-1) of two AgNPs preparations, differing in particle size (maximum diameter ≤ 100 nm and ≤ 150 nm respectively), were repelled in the gradients created inside the capillaries. However, cells exposed to similar low concentration of AgNO3 did not demonstrate any detectable repellent response, although it reduced cell viability by 20%, a decrease comparable to that caused by AgNPs. Computer analysis of swimming behaviour of cells exposed to AgNPs (0.2 mg l(-1) ) revealed a significant increase in turning events, as compared with unexposed controls, which is characteristic of bacterial repellent response. Greater AgNPs concentrations (up to 100 mg l(-1) ) also induced changes in the swimming behaviour, although they did not induce any detectable repellent response as determined by the chemical-in-pond assays. In contrast, AgNO3 failed to induce the repellent swimming behaviour within the wide range of concentrations tested (0.001-100 mg l(-1) ), and caused a significant inhibition of cell motility at a concentration above 0.1 mg l(-1) . The evidence presented here suggests there are likely to be alternative mechanisms by which nano-scale silver induces a repellent response, which is more direct than the toxic response of macro-forms of silver, attributed to ion formation and exposure.

The impact of zero-valent iron nanoparticles on a river water bacterial community.

Zero-valent iron (ZVI) nanoparticles are of interest because of their many potential biomedical and environmental applications. However, these particles have recently been reported to be cytotoxic to bacterial cells. The overall objective of this study was to determine the impact of 100mg/L ZVI nanoparticles on the diversity and structure of an indigenous river water bacterial community. Response during exposure for 36 days was determined by denaturing gel gradient electrophoresis (DGGE) analysis of bacterial 16S rRNA genes, amplified from extracted DNA, and viable and total cell abundances were determined by plate counting and fluorescent microscopy of DAPI-stained cells. Changes in river water chemistry were also monitored. Addition of ZVI nanoparticles led to a rapid decrease in oxidation-reduction potential (ORP) (+196 to -281 mV) and dissolved oxygen (DO) concentration (8.2-0.6 mg/L), both of which stabilized during the experiment. Interestingly, both viable and total bacterial cell abundances increased and pH decreased, characteristic of an active microbial community. Total community structure was visualized using rank-abundance plots fitted with linear regression models. The slopes of the regression models were used as a descriptive statistic of changes in evenness over time. Importantly, despite bacterial growth, addition of ZVI nanoparticles did not influence bacterial community structure.

Reintervention after mobile-bearing Oxford unicompartmental knee arthroplasty.

BACKGROUND: Medial compartment osteoarthritis is a common disorder that often is treated by unicompartmental knee arthroplasty (UKA). Although the Oxford 3 prosthesis is commonly used based on revision rate and cumulative survival, our experience suggests that although there may be adequate implant survival rates, we observed a worrisome and undisclosed reintervention rate of nonrevision procedures. PURPOSE: We describe the frequency and cause of repeat intervention subsequent to implanting this device. METHODS: Between 1998 and 2005, 398 patients underwent UKA using the Oxford 3 prosthesis. The minimum followup was 12 months (mean, 43 months; range, 12-102 months). RESULTS: Forty of the 398 (10%) patients had 55 (13.8%) repeat anesthetics (reintervention). There were 38 nonrevision reinterventions. Revision was performed in 15 patients (3.8%), but two patients had a second revision (17 revisions or 4.3%). We revised the UKA to a second UKA in seven of the 15 cases but two subsequently were rerevised to a TKA; eight were revised directly to a TKA. CONCLUSIONS: Although our data confirm the reported revision rates for this prosthesis, we observed a substantial reintervention rate. Most of the reinterventions are minor and are diagnosed frequently and treated arthroscopically. If revision is required, a second UKA may be considered and performed successfully in patients with isolated loosening of one component. LEVEL OF EVIDENCE: Level II, prognostic study. See Guidelines for Authors for a complete description of levels of evidence.

Fate of silica nanoparticles in simulated primary wastewater treatment.

Through novel application of small-angle neutron scattering, we examined the fate of silica nanoparticles (SiO(2)NPs) during simulated primary wastewater treatment, by measuring, in real time, the colloidal behavior of SiO(2)NPs in wastewater (sewage). We examined the effects of surface functionality on SiO(2)NP fate in wastewater, by comparing both unfunctionalized (uncoated or "bare") SiO(2)NPs and SiO(2)NPs functionalized with a thin coating of a nonionic surfactant (Tween 20), which is widely used in personal care and household product formulations containing engineered oxide nanoparticles. Our results show new evidence that the surface functionality of SiO(2)NPs plays a crucial role in their flocculation and sedimentation behavior in wastewater, and thus the likely efficacy of their removal from the effluent stream during primary wastewater treatment. Uncoated SiO(2)NPs did not flocculate in wastewater over typical residence times for primary treatment. Conversely, surface-functionalized (Tween-coated) SiO(2)NPs underwent rapid flocculation in wastewater. Our results show that the surface-functionalized SiO(2)NPs are likely to be removed by sedimentation to sewage sludge (typically recycled to land), whereas uncoated SiO(2)NPs will continue through the effluent stream. While nanoparticle design is driven by use purpose, this study shows new potential for exploiting surface functionalization of nanoparticles to modify their environmental pathways.

A one-step aqueous synthetic route to extremely small CdSe nanoparticles.

By employing Na2Se as a selenium source, we demonstrate that extremely small ( approximately 1 nm) mercapto acid-stabilized CdSe nanoparticles can be conveniently prepared in water. The as-prepared nanoparticles start to show dominant near band-gap photoluminescence in the blue spectral range and show high photoluminescence in the green spectral range.

Optimized HREM imaging of objects supported by amorphous substrates using spherical aberration adjustment.

High Resolution Electron Microscopy (HREM) is often used to characterize objects supported by amorphous substrates, usually amorphous carbon. HREM is currently undergoing step change in performance due to aberration correctors. This paper examines the aberration corrected imaging of objects supported by amorphous substrates. In particular, we show that a substantial increase in the ratio of the object contrast to the substrate contrast can be achieved by utilizing the strong variation of phase contrast with height, which is present when the spherical aberration has been adjusted to a small value. This variation is examined using the familiar Weak Phase Object Approximation model from which it is determined that the contrast ratio achieves a maximum at a small nonzero value of the spherical aberration. This result is confirmed by multislice modelling which allows for deviations from the Weak Phase Object Approximation and delocalization effects. One important practical result of this study is the need to place the object of interest on the correct side of the amorphous carbon substrate.