DEAE/Catechol-Chitosan Conjugates as Bioactive Polymers: Synthesis, Characterization, and Potential Applications.

This work provides the first description of the synthesis and characterization of water-soluble chitosan (Cs) derivatives based on the conjugation of both diethylaminoethyl (DEAE) and catechol groups onto the Cs backbone (Cs-DC) in order to obtain a Cs derivative with antioxidant and antimicrobial properties. The degree of substitution [DS (%)] was 35.46% for DEAE and 2.53% for catechol, determined by spectroscopy. Changes in the molecular packing due to the incorporation of both pendant groups were described by X-ray diffraction and thermogravimetric analysis. For Cs, the crystallinity index was 59.46% and the maximum decomposition rate appeared at 309.3 °C, while for Cs-DC, the values corresponded to 16.98% and 236.4 °C, respectively. The incorporation of DEAE and catechol groups also increases the solubility of the polymer at pH > 7 without harming the antimicrobial activity displayed by the unmodified polymer. The catecholic derivatives increase the radical scavenging activity in terms of the half-maximum effective concentration (EC50). An EC50 of 1.20 µg/mL was found for neat hydrocaffeic acid (HCA) solution, while for chitosan-catechol (Cs-Ca) and Cs-DC solutions, concentrations equivalent to free HCA of 0.33 and 0.41 µg/mL were required, respectively. Cell culture results show that all Cs derivatives have low cytotoxicity, and Cs-DC showed the ability to reduce the activity of reactive oxygen species by 40% at concentrations as low as 4 µg/mL. Polymeric nanoparticles of Cs derivatives with a hydrodynamic diameter (Dh) of around 200 nm, unimodal size distributions, and a negative ζ-potential were obtained by ionotropic gelation and coated with hyaluronic acid in aqueous suspension, providing the multifunctional nanoparticles with higher stability and a narrower size distribution.

Evaluation of different methodologies for primary human dermal fibroblast spheroid formation: automation through 3D bioprinting technology.

Cell spheroids have recently emerged as an effective tool to recapitulate native microenvironments of living organisms in anin vitroscenario, increasing the reliability of the results obtained and broadening their applications in regenerative medicine, cancer research, disease modeling and drug screening. In this study the generation of spheroids containing primary human dermal fibroblasts was approached using the two-widely employed methods: hanging-drop and U-shape low adhesion plate (LA-plate). Moreover, extrusion-based three-dimensional (3D) bioprinting was introduced to achieve a standardized and scalable production of cell spheroids, decreasing considerably the possibilities of human error. This was ensured when U-shape LA-plates were used, showing an 85% formation efficiency, increasing up to a 98% when it was automatized using the 3D bioprinting technologies. However, sedimentation effect within the cartridge led to a reduction of 20% in size of the spheroid during the printing process. Hyaluronic acid (HA) was chosen as viscosity enhancer to supplement the bioink and overcome cell sedimentation within the cartridge due to the high viability values exhibited by the cells-around 80%-at the used conditions. Finally, (ANCOVA) of spheroid size over time for different printing conditions stand out HA 0.4% (w/v) 60 kDa as the viscosity-improved bioink that exhibit the highest cell viability and spheroid formation percentages. Besides, not only did it ensure cell spheroid homogeneity over time, reducing cell sedimentation effects, but also wider spheroid diameters over time with less variability, outperforming significantly manual loading.

Cardiac Extracellular Matrix Hydrogel Enriched with Polyethylene Glycol Presents Improved Gelation Time and Increased On-Target Site Retention of Extracellular Vesicles.

Stem-cell-derived extracellular vesicles (EVs) have demonstrated multiple beneficial effects in preclinical models of cardiac diseases. However, poor retention at the target site may limit their therapeutic efficacy. Cardiac extracellular matrix hydrogels (cECMH) seem promising as drug-delivery materials and could improve the retention of EVs, but may be limited by their long gelation time and soft mechanical properties. Our objective was to develop and characterize an optimized product combining cECMH, polyethylene glycol (PEG), and EVs (EVs-PEG-cECMH) in an attempt to overcome their individual limitations: long gelation time of the cECMH and poor retention of the EVs. The new combined product presented improved physicochemical properties (60% reduction in half gelation time, p < 0.001, and threefold increase in storage modulus, p < 0.01, vs. cECMH alone), while preserving injectability and biodegradability. It also maintained in vitro bioactivity of its individual components (55% reduction in cellular senescence vs. serum-free medium, p < 0.001, similar to EVs and cECMH alone) and increased on-site retention in vivo (fourfold increase vs. EVs alone, p < 0.05). In conclusion, the combination of EVs-PEG-cECMH is a potential multipronged product with improved gelation time and mechanical properties, increased on-site retention, and maintained bioactivity that, all together, may translate into boosted therapeutic efficacy.

Elastin-Plasma Hybrid Hydrogels for Skin Tissue Engineering.

Dermo-epidermal equivalents based on plasma-derived fibrin hydrogels have been extensively studied for skin engineering. However, they showed rapid degradation and contraction over time and low mechanical properties which limit their reproducibility and lifespan. In order to achieve better mechanical properties, elasticity and biological properties, we incorporated a elastin-like recombinamer (ELR) network, based on two types of ELR, one modified with azide (SKS-N3) and other with cyclooctyne (SKS-Cyclo) chemical groups at molar ratio 1:1 at three different SKS (serine-lysine-serine sequence) concentrations (1, 3, and 5 wt.%), into plasma-derived fibrin hydrogels. Our results showed a decrease in gelation time and contraction, both in the absence and presence of the encapsulated human primary fibroblasts (hFBs), higher mechanical properties and increase in elasticity when SKSs content is equal or higher than 3%. However, hFBs proliferation showed an improvement when the lowest SKS content (1 wt.%) was used but started decreasing when increasing SKS concentration at day 14 with respect to the plasma control. Proliferation of human primary keratinocytes (hKCs) seeded on top of the hybrid-plasma hydrogels containing 1 and 3% of SKS showed no differences to plasma control and an increase in hKCs proliferation was observed for hybrid-plasma hydrogels containing 5 wt.% of SKS. These promising results showed the need to achieve a balance between the reduced contraction, the better mechanical properties and biological properties and indicate the potential of using this type of hydrogel as a testing platform for pharmaceutical products and cosmetics, and future work will elucidate their potential.

Evaluation of Glycerylphytate Crosslinked Semi- and Interpenetrated Polymer Membranes of Hyaluronic Acid and Chitosan for Tissue Engineering.

In the present study, semi- and interpenetrated polymer network (IPN) systems based on hyaluronic acid (HA) and chitosan using ionic crosslinking of chitosan with a bioactive crosslinker, glycerylphytate (G1Phy), and UV irradiation of methacrylate were developed, characterized and evaluated as potential supports for tissue engineering. Semi- and IPN systems showed significant differences between them regarding composition, morphology, and mechanical properties after physicochemical characterization. Dual crosslinking process of IPN systems enhanced HA retention and mechanical properties, providing also flatter and denser surfaces in comparison to semi-IPN membranes. The biological performance was evaluated on primary human mesenchymal stem cells (hMSCs) and the systems revealed no cytotoxic effect. The excellent biocompatibility of the systems was demonstrated by large spreading areas of hMSCs on hydrogel membrane surfaces. Cell proliferation increased over time for all the systems, being significantly enhanced in the semi-IPN, which suggested that these polymeric membranes could be proposed as an effective promoter system of tissue repair. In this sense, the developed crosslinked biomimetic and biodegradable membranes can provide a stable and amenable environment for hMSCs support and growth with potential applications in the biomedical field.

Prevalence of and risk factors for erectile dysfunction in young nondiabetic obese men: results from a regional study.

Erectile dysfunction (ED), a condition closely related to cardiovascular morbidity and mortality, is frequently associated with obesity. In this study, we aimed to determine the prevalence of ED and evaluate the associated risk factors in a cohort of 254 young (18-49 years) nondiabetic obese (body mass index [BMI] ≥ 30 kg m-2) men from primary care. Erectile function (International Index of Erectile Function [IIEF-5] questionnaire), quality of life (Aging Males' Symptoms [AMS scale]), and body composition analysis (Tanita MC-180MA) were determined. Total testosterone was determined using high-performance liquid chromatography-mass spectrometry. Multivariate logistic regression analysis was used to study the factors associated with ED. ED prevalence was 42.1%. Subjects with ED presented higher BMI, waist circumference, number of components of the metabolic syndrome, AMS score, insulin resistance, and a more unfavorable body composition than those without ED. Multivariate logistic regression analysis showed that a pathological AMS score (odds ratio [OR]: 4.238, P < 0.001), degree of obesity (BMI ≥ 40 kg m-2, OR: 2.602, P = 0.005, compared with BMI 30-34.9 kg m-2), high-density lipoprotein (HDL)-cholesterol levels (OR: 0.956, P = 0.004), and age (OR: 1.047, P = 0.016) were factors independently associated with ED. In conclusion, we demonstrate that, in a primary care-based cohort of nondiabetic young obese men, ED affected >40% of subjects. A pathological AMS score, the degree of obesity, and age were positively associated with ED, while elevated HDL-cholesterol levels were inversely associated with the odds of presenting ED. Further prospective studies are needed to evaluate the long-term consequences of ED in this population.

Glycerylphytate compounds with tunable ion affinity and osteogenic properties.

Phytic acid (PA) is a natural-occurring antioxidant, which plays an important role in many biological processes. PA is recognized as a potent inhibitor of lipid peroxidation because of its high affinity to multivalent cations, and it can play a role in osteogenic processes. However, its powerful chelating capacity is controversial because it can lead to a severe reduction of mineral availability in the organism. For this reason, compounds with beneficial biological properties of PA, but a modular ion binding capacity, are of high interest. In this work, we report the synthesis and physicochemical characterization of two hydroxylic derivatives of PA, named glycerylphytates (GPhy), through a condensation reaction of PA with glycerol (G). Both derivatives present antioxidant properties, measured by ferrozine/FeCl2 method and chelating activity with calcium ions depending on the content of glyceryl groups incorporated. Besides, the hydroxylic modification not only modulates the ion binding affinity of derivatives but also improves their cytocompatibility in human bone marrow mesenchymal cells (MSCs). Furthermore, GPhy derivatives display osteogenic properties, confirmed by COL1A and ALPL expression depending on composition. These positive features convert GPhy compounds into potent alternatives for those skeletal diseases treatments where PA is tentatively applied.

Preparation of Polymeric and Composite Scaffolds by 3D Bioprinting.

Over the recent years, the advent of 3D bioprinting technology has marked a milestone in osteochondral tissue engineering (TE) research. Nowadays, the traditional used techniques for osteochondral regeneration remain to be inefficient since they cannot mimic the complexity of joint anatomy and tissue heterogeneity of articular cartilage. These limitations seem to be solved with the use of 3D bioprinting which can reproduce the anisotropic extracellular matrix (ECM) and heterogeneity of this tissue. In this chapter, we present the most commonly used 3D bioprinting approaches and then discuss the main criteria that biomaterials must meet to be used as suitable bioinks, in terms of mechanical and biological properties. Finally, we highlight some of the challenges that this technology must overcome related to osteochondral bioprinting before its clinical implementation.

Correlation of dorsiflexion angle and plantar pressure following arthrodesis of the first metatarsophalangeal joint.

BACKGROUND: The correlation between angle of fusion of the first metatarsophalangeal (1MTTP) joint and pressures under metatarsal heads and hallux has not been well characterized. The main purpose was to investigate the correlation between fusion dorsiflexion angle of the 1MTTP joint and plantar pressures under the first metatarsal head and hallux during gait. METHODS: Patients who underwent arthrodesis of the 1MTTP joint from 2005 to 2010 were seen for a follow-up examination. Of 27 patients, 15 (22 feet) with a mean follow-up of 26.2 months were evaluated in the study. Main outcomes included the fusion clinical and radiological dorsiflexion angles and the mean and maximum dynamic plantar pressures under all 5 metatarsal heads and under the hallux. Plantar pressures were measured through an in-shoe system while patients walked normally along a corridor. RESULTS: The dorsiflexion angle was positively correlated with mean dynamic plantar pressures under the first metatarsal head: P = .02 (r = 0.5) for clinical angle, and P = .01 (r = 0.58) for radiological angle. Patients with 15 degrees or more of clinical dorsiflexion angle demonstrated higher mean dynamic plantar pressure under the first metatarsal head (P = .05) and higher maximum dynamic plantar pressure under the second metatarsal head (P = .04) compared with patients with less than 15 degrees. In contrast, the latter patients demonstrated higher mean dynamic plantar pressure beneath the hallux (P = .04). Patients with 30 degrees or more of radiological dorsiflexion angle demonstrated significantly higher mean dynamic plantar pressure under the first metatarsal head (P = .04) compared with patients with less than 30 degrees. CONCLUSION: Higher dorsiflexion angles correlate with higher plantar pressures under the first metatarsal head. Lower dorsiflexion angles increase plantar pressures beneath the hallux during gait. CLINICAL RELEVANCE: Significant increase in plantar pressure under the first metatarsal head may be avoided by performing the arthrodesis of the 1MTTP joint below 30° and 15° for the radiological and clinical dorsiflexion angles, respectively.

Amphiphilic self-assembled "polymeric drugs": morphology, properties, and biological behavior of nanoparticles.

This article reports the fabrication and characterization of NPs based on the self-assembling of polymeric drugs with amphiphilic character synthetized from oleyl 2-acetamido-2-deoxy-α-d-glucopyranoside methacrylate and vinyl pyrrolidone (OAGMA-VP). NPs were spherical, with an apparent hydrodynamic diameter between 91 and 226 nm and with zeta potential values that ensure stability. Atomic concentrations of C, O, and N, determined by X-ray photoelectron spectroscopy (XPS) of NPs, compared well with the corresponding theoretical values. High resolution XPS C1s spectra suggest that the carbons bound to heteroatoms or carbonyl groups are preferentially situated on the surface of the NP samples. ToF-SIMS spectra analyzed by principal component analysis (PCA) indicated that ions coming from acetyl and oleyl groups of OAGMA play important roles in the outer structure of NPs. Water contact angle and surface tension values of NPs were characteristic of hydrophilic surfaces, confirming the location of VP sequences on the surface. Cell culture assays showed that copolymeric NPs did not compromise biocompatibility of human fibroblasts according to ISO standard, but they were cytotoxic on a human glioblastoma cell line (A-172).

Factores de riesgo involucrados en la sepsis de los lactantes ingresados en el hospital escuela durante el mes de junio de 2008 / Infants Sepsis produces a high rate of morbility and mortality

Mundialmente se reportan elevadas tasas de morbilidad y mortalidad por sepsis en lactantes.Objetivo: determinar los factores epidemiológicos, el comportamiento clínico y el abordaje terapéutico de los pacientes ingresados con el diagnóstico de sepsis en la sala de lactantes del Hospital Escuela. Metodología: estudio observacional transversal descriptivo realizado del 26 de mayo al 20 de junio del 2008. La información se obtuvo a partir de la revisión de 180 expedientes clínicos, obteniéndose una muestra de 34 pacientes, con diagnóstico de sepsis. Resultados: los afectados de acuerdo a la edad y sexo fueron los lactantes menores de 6 meses de edad en 58.8%, con mayor frecuencia en el grupo de 1 a 3 meses 32.4%, predomino el sexo masculino con 58.8%. El 79.4% de los lactantes tenían menos de 7 días de hospitalización. El 70.6% de los lactantes adquirió la infección extra hospitalaria y 29.4%en el hospital. El estado nutricional de cada lactante, 32% presentaban algún grado de desnutrición. A 38.5% de los lactantes no se les efectuó el diagnostico oportuno de sepsis al ingreso. El 44.1% tenían factores de riesgo asociados a sepsis. El foco de entrada de la infección fue el respiratorio 47%, con diagnóstico de neumonía 29.4%. Los hallazgos clínicos y laboratoriales son: fiebre 97.06%,leucocitosis 76.47%, rechazo al alimento 58.82%. El 85.7% de los lactantes se encontraron en un estadío clínico de sepsis y 4.8% en estadío de shock séptico tardío. El estudio bacteriológico realizado fue el hemocultivo en 55.9%, y de este, en 88.2% no hubo crecimiento de bacterias. El tratamiento antimicrobiano utilizado fue cefalosporinas 73.5% y penicilina 38.2%....(AU)