The kinetics of the PuO2 to Pu2O3 conversion.

In an oxidizing environment, the oxide formed on plutonium (Pu) metal is composed of a plutonium dioxide (PuO2) top layer and a thin cubic plutonium sesquioxide (Pu2O3) middle layer. In a reducing environment, the PuO2 layer auto-reduces to cubic Pu2O3. The speed and extent of this conversion depend on the combination of temperature and time. While PuO2 provides a strong diffusion barrier against unwanted Pu corrosion by gaseous species (like hydrogen), Pu2O3 does not, since its crystal structure has chains of oxygen vacancies. The kinetics of the PuO2 reduction are, therefore, of fundamental interest and enable researchers to better protect Pu from corrosion. In this report, the oxygen-diffusion-limited kinetics of the dioxide to sesquioxide conversion were obtained by dynamically heating a PuO2-covered Pu sample from 294 to 418 K in a high-vacuum vessel equipped with an in situ spectroscopic ellipsometer. The physical/chemical constraints in the conversion process were combined with the ellipsometry method of multi-sample analysis to track the percentage of PuO2 and to compute the extent of Pu2O3 formation. The resulting diffusion coefficients were compared against and then combined with complementary literature data to produce a comprehensive set of kinetic parameters for reliably modeling oxide conversion over a larger temperature range than spanned by prior studies. The extracted thermal activation energy barrier (43.7 kJ/mol) and pre-exponential factor (5.0 × 10-10 cm2/s) for the oxygen-diffusion-limited process can be used to accurately model the PuO2 to Pu2O3 transformation in vacuum and/or inert gas applications.

Methane dissociative chemisorption and detailed balance on Pt(111): dynamical constraints and the modest influence of tunneling.

A dynamically biased (d-) precursor mediated microcanonical trapping (PMMT) model of the activated dissociative chemisorption of methane on Pt(111) is applied to a wide range of dissociative sticking experiments, and, by detailed balance, to the methane product state distributions from the thermal associative desorption of adsorbed hydrogen with coadsorbed methyl radicals. Tunneling pathways were incorporated into the d-PMMT model to better replicate the translational energy distribution of the desorbing methane product from the laser induced thermal reaction of coadsorbed hydrogen and methyl radicals occurring near T(s) = 395 K. Although tunneling is predicted to be inconsequential to the thermal dissociative chemisorption of CH4 on Pt(111) at the high temperatures of catalytic interest, once the temperature drops to 395 K the tunneling fraction of the reactive thermal flux reaches 15%, and as temperatures drop below 275 K the tunneling fraction exceeds 50%. The d-PMMT model parameters of {E0 = 58.9 kJ/mol, s = 2, η(v) = 0.40} describe the apparent threshold energy for CH4/Pt(111) dissociative chemisorption, the number of surface oscillators involved in the precursor complex, and the efficacy of molecular vibrational energy to promote reaction, relative to translational energy directed along the surface normal. Molecular translations parallel to the surface and rotations are treated as spectator degrees of freedom. Transition state vibrational frequencies are derived from generalized gradient approximation-density functional theory electronic structure calculations. The d-PMMT model replicates the diverse range of experimental data available with good fidelity, including some new effusive molecular beam and ambient gas dissociative sticking measurements. Nevertheless, there are some indications that closer agreement between theory and experiments could be achieved if a surface efficacy less than one was introduced into the modeling as an additional dynamical constraint.

Communication: angle-resolved thermal dissociative sticking of CH4 on Pt(111): further indication that rotation is a spectator to the gas-surface reaction dynamics.

Effusive molecular beam measurements of angle-resolved thermal dissociative sticking coefficients for CH(4) impinging on a Pt(111) surface, at a temperature of 700 K, are reported and compared to theoretical predictions. The reactivity falls off steeply as the molecular angle of incidence increases away from the surface normal. Successful modeling of the thermal dissociative sticking behavior, consistent with existent CH(4) supersonic molecular beam experiments involving rotationally cold molecules, required that rotation be treated as a spectator degree of freedom.