Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing.

Solute transport during rapid and repeated thermal cycle in additive manufacturing (AM) leading to non-equilibrium, non-uniform microstructure remains to be studied. Here, a fully-coupled fluid dynamics and microstructure modelling is developed to rationalise the dynamic solute transport process and elemental segregation in AM, and to gain better understanding of non-equilibrium nature of intercellular solute segregation and cellular structures at sub-grain scale during the melting-solidification of the laser powder bed fusion process. It reveals the solute transport induced by melt convection dilutes the partitioned solute at the solidification front and promotes solute trapping, and elucidates the mechanisms of the subsequent microstructural morphology transitions to ultra-fine cells and then to coarse cells. These suggest solute trapping effect could be made used for reducing crack susceptibility by accelerating the solidification process. The rapid solidification characteristics exhibit promising potential of additive manufacturing for hard-to-print superalloys and aid in alloy design for better printability.

Porous poly (lactic acid)/poly (ethylene glycol) blending membrane for microorganisms encapsulation.

ABSTRACTImmobilized microorganisms technology has been explored as a promising wastewater treatment method. To further increase the activity of the immobilized microorganisms, a porous membrane which was composed of poly (lactic acid) (PLA) and poly (ethylene glycol) (PEG) was designed for microorganism encapsulation. The plane membrane and the spherical membrane were prepared respectively. The morphology, mechanical properties, nitrate permeability, and biodegradability of the plane membranes were investigated to determine an optimized formulation. And then, denitrifying bacteria was encapsulated by the spherical membrane and its denitrification performance in synthetic wastewater was explored. The mean pore size of the PLA/PEG plane membranes ranged from 2.09 ± 0.63 µm to 3.15 ± 1.32 µm. PEG stimulated interconnected pore structure of the PLA/PEG plane membrane. Compare with neat PLA membrane, the tensile strength of the PLA/50%PEG plane membrane decreased by about 53.2% and elongation at break increased by about 103.5%. Nitrate permeability attained a maximum of 188.95 ± 4.59 mg·L-1·m-2·h-1 for PLA/50%PEG plane membrane. The denitrifying active sludge enclosed with the spherical membrane showed good denitrification performance in a short start-up time. The nitrate removal rate reached 51.14% on the 4th day and 82.53% on the 17th day. This porous PLA/50%PEG membrane was good for the diffusion of substrates and nutrients, which enabled the encapsulated microorganism recovered activity in a short time. The spraying method made the microorganism encapsulation could be designed according to the different microorganisms and different user environments, which expanded the application scope of microorganism encapsulation technology.

A Parameterized Leblond-Devaux Equation for Predicting Phase Evolution during Welding E36 and E36Nb Marine Steels.

High heat input welding can improve welding efficiency, but the impact toughness of the heat-affected zone (HAZ) deteriorates significantly. Thermal evolution in HAZ during welding is the key factor affecting welded joints' microstructures and mechanical properties. In this study, the Leblond-Devaux equation for predicting phase evolution during the welding of marine steels was parameterized. In experiments, E36 and E36Nb samples were cooled down at different rates from 0.5 to 75 °C/s; the obtained thermal and phase evolution data were used to construct continuous cooling transformation diagrams, which were used to derive the temperature-dependent parameters in the Leblond-Devaux equation. The equation was then used to predict phase evolution during the welding of E36 and E36Nb; the quantitative experimental phase fractions of the coarse grain zone were compared with simulated results to verify the prediction results, which are in good agreement. When heat input is 100 kJ/cm, phases in the HAZ of E36Nb are primarily granular bainite, whereas for E36, the phases are mainly bainite with acicular ferrite. When heat input increases to 250 kJ/cm, ferrite and pearlite form in both steels. The predictions agree with experimental observations.

Design Improvement of Four-Strand Continuous-Casting Tundish Using Physical and Numerical Simulation.

The flow pattern is vital for the metallurgical performance of continuous casting tundishes. The purpose of this study was to design and optimize the flow characteristics inside a four-strand tundish. Numerical simulations and water model experiments were validated and utilized to investigate the flow behavior. The effect of different flow rates in the original tundish was evaluated; two modified retaining walls and a new ladle shroud were designed for optimization. The molten steel inside the original tundish tends to be more active as the flow rate increases from 3.8 L/min to 6.2 L/min, which results in a reduction in dead volume from 36.47% to 17.59% and better consistency between different outlets. The dead volume and outlet consistency inside the tundish are improved significantly when the modified walls are applied. The proper design of the diversion hole further enhances the plug volume from 6.39% to 13.44% of the tundish by forming an upstream circular flow in the casting zone. In addition, the new trumpet ladle shroud demonstrates an advantage in increasing the response time from 152.5 s to 167.5 s and alleviating the turbulence in the pouring zone, which is beneficial for clean steel production.

Toxicological response of Pacific white shrimp Litopenaeus vannamei to a hazardous cyanotoxin nodularin exposure.

Nodularin (NOD) is a harmful cyanotoxin that affects shrimp farming. The hepatopancreas and intestine of shrimp are the main target organs of cyanotoxins. In this study, we exposed Litopenaeus vannamei to NOD at 0.1 and 1 µg/L for 72 h, respectively, and changes in histology, oxidative stress, gene transcription, metabolism, and intestinal microbiota were investigated. After NOD exposure, the hepatopancreas and intestine showed obvious histopathological damage and elevated oxidative stress response. Transcription patterns of immune genes related to detoxification, prophenoloxidase and coagulation system were altered in the hepatopancreas. Furthermore, metabolic patterns, especially amino acid metabolism and arachidonic acid related metabolites, were also disturbed. The integration of differential genes and metabolites revealed that the functions of "alanine, aspartic acid and glutamate metabolism" and "aminoacyl-tRNA biosynthesis" were highly affected. Alternatively, NOD exposure induced the variation of the diversity and composition of intestinal microbiota, especially the abundance of potentially beneficial bacteria (Demequina, Phyllobacterium and Pseudoalteromonas) and pathogenic bacteria (Photobacterium and Vibrio). Several intestinal bacteria were correlated with the changes of host the metabolic function and immune factors. These results revealed the toxic effects of NOD on shrimp, and identified some biomarkers.

Essential oil of Magnolia denudata is an effective anesthetic for spotted seabass (Lateolabrax maculatus): a test of its effect on blood biochemistry, physiology, and gill morphology.

Magnolia denudata is a well-known ornamental tree in China due to its beautiful blossoms, and it has been used as an analgesic to treat human headaches. This study investigated the anesthetic potential and physiological response of the essential oil of M. denudata flowers on spotted seabass Lateolabrax maculatus. Fish (mean ± SD, 164.16 ± 15.40 g) were individually exposed to different concentrations of M. denudata essential oil (MDO, 10, 20, 40, 60, 80, 100, and 120 mg/L) and eugenol (10, 20, 30, 40, 50, 60, and 70 mg/L) to investigate anesthetic efficacy. Based on the ideal time criterion for anesthetic induction (< 3 min) and recovery (< 10 min), the lowest effective concentration for spotted seabass was 100 mg/L for MDO and 60 mg/L for eugenol. The physiological and histopathological damage in the gill of L. maculatus after using MDO and eugenol was also evaluated at the minimum dose inducing deep anesthesia, and at 0, 6, and 24 h after recovery. The results showed that MDO and eugenol anesthesia alleviated the levels of cortisol and glucose and the lactic dehydrogenase activity induced by handling. Compared with eugenol, MDO also caused secondary stress to the body, but MDO caused minor physiological responses and histological changes in the gills. This study suggests that MDO is an effective anesthetic for spotted seabass.

The Effect of Heat Source Path on Thermal Evolution during Electro-Gas Welding of Thick Steel Plates.

In recent years, the shipbuilding industry has experienced a growing demand for tighter control and higher strength requirements in thick steel plate welding. Electro-gas welding (EGW) is a high heat input welding method, widely used to improve the welding efficiency of thick plates. Modelling the EGW process of thick steel plates has been challenging due to difficulties in accurately depicting the heat source path movement. An EGW experiment on 30 mm thickness E36 steel plates was conducted in this study. A semi-ellipsoid heat source model was implemented, and its movement was mathematically expressed using linear, sinusoidal, or oscillate-stop paths. The geometry of welding joints, process variables, and steel composition are taken from industrial scale experiments. The resulting thermal evolutions across all heat source-path approaches were verified against experimental observations. Practical industrial recommendations are provided and discussed in terms of the fusion quality for E36 steel plates with a heat input of 157 kJ/cm. It was found that the oscillate-stop heat path predicts thermal profile more accurately than the sinusoidal function and linear heat path for EGW welding of 30 mm thickness and above. The linear heat path approach is recommended for E36 steel plate thickness up to 20 mm, whereas maximum thickness up to 30 mm is appropriate for sinusoidal path, and maximum thickness up to 35 mm is appropriate for oscillate-stop path in EGW welding, assuming constant heat input.

Toxic effects of cadmium and lead exposure on intestinal histology, oxidative stress response, and microbial community of Pacific white shrimp Litopenaeus vannamei.

Cadmium (Cd) and lead (Pb) are two hazardous pollutants that threaten shrimp farming. The intestine is an important organ for digestion and immunity. We separately exposed Pacific white shrimp Litopenaeus vannamei to 500 µg/L Cd or 500 µg/L Pb seawater for 7 days, and 45 shrimp from each group were used to evaluate the changes of intestinal histopathological, oxidative stress, and microbiota composition. After Cd and Pb exposure, shrimp intestine appeared significant mucosal damage and oxidative stress, and the microbiota variation were induced. Specifically, the abundance of the phyla Bacteroidetes and Actinobacteria were induced, that of Proteobacteria and Firmicutes were deduced. The abundances of putative beneficial bacteria (Lactobacillus, Weissella, Demequina, Formosa and Ruegeria) and potentially pathogenic bacteria (Vibrio and Photobacterium) were fluctuated. Furthermore, the nutrient metabolic function of intestinal microbes was significantly altered. We concluded that Cd and Pb exposure had negative effects on the intestinal health of shrimp.

Microstructure and Thermal Analysis of Metastable Intermetallic Phases in High-Entropy Alloy CoCrFeMo0.85Ni.

CoCrFeMoNi high entropy alloys (HEAs) exhibit several promising characteristics for potential applications of high temperature coating. In this study, metastable intermetallic phases and their thermal stability of high-entropy alloy CoCrFeMo0.85Ni were investigated via thermal and microstructural analyses. Solidus and liquidus temperatures of CoCrFeMo0.85Ni were determined by differential thermal analysis as 1323 °C and 1331 °C, respectively. Phase transitions also occur at 800 °C and 1212 °C during heating. Microstructure of alloy exhibits a single-phase face-centred cubic (FCC) matrix embedded with the mixture of (Co, Cr, Fe)-rich tetragonal phase and Mo-rich rhombohedron-like phase. The morphologies of two intermetallics show matrix-based tetragonal phases bordered by Mo-rich rhombohedral precipitates around their perimeter. The experimental results presented in our paper provide key information on the microstructure and thermal stability of our alloy, which will assist in the development of similar thermal spray HEA coatings.

Solute-adsorption enhanced heterogeneous nucleation: the effect of Cu adsorption on α-Al nucleation at the sapphire substrate.

Interfacial adsorption of solute atoms is a promising means to tune heterogeneous nucleation. In this study, a new method has been established to theoretically evaluate the effect of solute addition on the nucleation potency of heterogeneous nucleation interfaces. The evaluation consists of three steps: (1) analyzing the solute adsorption behavior; (2) determining the nucleation mode; and (3) evaluating the effect of solute adsorption on nucleation potency using the solute-adsorbed interface model. A combination of the ab initio and molecular dynamics methods together with the two-phase thermodynamic model was used to evaluate a prototype Al-Cu/(0001) sapphire interface. It is found that solute Cu atoms adsorb at the interface between the melt and (0001) sapphire interface. The adsorption is driven by the strengthening of the Cu-Al bonds as revealed by the Bader charge analysis which is demonstrated to reduce interfacial energy. Furthermore, it is revealed that the interfacial adoption of Cu results in the formation of an Al-Cu adsorption layer, which enhances the interfacial chemical affinity thus enlarging the nucleation driving force. Meanwhile, the lattice mismatch between the sapphire substrate and the primary Al (α-Al) nucleus is decreased by Cu addition, which lowers the barrier for nucleation. The above two effects together increase the nucleation potency of the studied interface, which is in good agreement with previous experiments. It is proposed that the effect of solute adsorption shall be considered in the search for effective substrates for tuning the nucleation.

High Entropy Alloys as Filler Metals for Joining.

In the search for applications for alloys developed under the philosophy of the High Entropy Alloy (HEA)-type materials, the focus may be placed on applications where current alloys also use multiple components, albeit at lower levels than those found in HEAs. One such area, where alloys with complex compositions are already found, is in filler metals used for joining. In soldering (<450 °C) and brazing (>450 °C), filler metal alloys are taken above their liquidus temperature and used to form a metallic bond between two components, which remain both unmelted and largely unchanged throughout the process. These joining methods are widely used in applications from electronics to aerospace and energy, and filler metals are highly diverse, to allow compatibility with a broad range of base materials (including the capability to join ceramics to metals) and a large range of processing temperatures. Here, we review recent developments in filler metals relevant to High Entropy materials, and argue that such alloys merit further exploration to help overcome a number of current challenges that need to be solved for filler metal-based joining methods.

Toxic effects of ammonia and thermal stress on the intestinal microbiota and transcriptomic and metabolomic responses of Litopenaeus vannamei.

Ammonia and thermal stress frequently have harmful effects on aquatic animals. The intestine is an important barrier allowing the body to defend against stress. In this study, we investigated the intestinal microbiota and transcriptomic and metabolomic responses of Litopenaeus vannamei subjected to individual and combined ammonia and thermal stress. The results showed that obvious variation in the intestinal microbiota was observed after stress exposure, with increased levels of Firmicutes and decreased levels of Bacteroidetes and Planctomycetes. Several genera of putatively beneficial bacteria (Demequina, Weissella and Bacteroides) were abundant, while Formosa, Kriegella, Ruegeria, Rhodopirellula and Lutimonas were decreased; pathogenic bacteria of the genus Vibrio were increased under individual stress but decreased under combined stress. The intestinal transcriptome revealed several immune-related differentially expressed genes associated with the peritrophic membrane and antimicrobial processes in contrasting accessions. Haemolymph metabolomic analysis showed that stress exposure disturbed the metabolic processes of the shrimp, especially amino acid metabolism. This study provides insight into the underlying mechanisms associated with the intestinal microbiota, immunity and metabolism of L.vannamei in response to ammonia and thermal stress; ten stress-related metabolite markers were identified, including L-lactic acid, gulonic acid, docosahexaenoic acid, l-lysine, gamma-aminobutyric acid, methylmalonic acid, trans-cinnamate, N-acetylserotonin, adenine, and dihydrouracil.

Porous solid carbon source-supported denitrification in simulated mariculture wastewater.

A porous solid carbon source was prepared by semen litchi (SL), poly(vinyl alcohol) (PVA) and sodium alginate (SA) in aqueous. The effect of SL content on the structures and denitrification performance of the porous solid carbon source in simulated mariculture wastewater was investigated. The SL/PVA/SA beads showed a network structure with a wide range of macropores. Compared with blank beads, the SL/PVA/SA beads showed an increased rough surface and whole distribution on the surface with the increase of SL. In addition, SL/PVA/SA beads have more uniform pore size, but the porosity of SL/PVA/SA beads was decreased with the increase of SL. The porosity of the beads was 83.24%, 74.24%, 71.48% and 71.29% for blank beads and SL/PVA/SA beads contained 30%, 40% and 50% SL, when it was used as a solid carbon source for denitrification. Owing to their good porosity and biocompatibility, SL/PVA/SA beads had shorter acclimation time. Nitrate removal rate could reach up to 100% after two days of adaptation. After the exhaustion of carbon sources, nitrate removal rate less than 50% occurred at the 9th, 10th and 11th day for SL/PVA/SA beads that contained 30%, 40% and 50% SL, respectively. The beads that contained 50% SL exhibited longer lifetime during the denitrification reaction and denitrification rate could reach 243.5 ± 7.08 mg N (L d)-1. It could be used as an economical and effective carbon source for denitrification in mariculture wastewater.

Toxicological effects of microplastics in Litopenaeus vannamei as indicated by an integrated microbiome, proteomic and metabolomic approach.

Microplastics (MPs) are a hazardous pollutant of world concern that threaten aquatic organisms and ecosystems. In this study, we chose the worldwide-distributed shrimp Litopenaeus vannamei as a model and investigated the toxicological effects of five types of MPs on L. vannamei using several omics approaches. After 14 days of exposure to MPs, obvious intestinal microbiota variation was observed, such as increased abundances of Bacteroidetes and Proteobacteria and a decreased abundance of Firmicutes. Specifically, MPs induced several putative opportunistic pathogens and reduced lactic acid- and short-chain fatty acid-producing bacteria. Alternatively, MPs altered haemolymph proteome profiles, but the five types of MPs had different effects on the enriched pathways and the expression of immune-related proteins. Furthermore, MPs also caused haemolymph metabolite variation, especially in amino acid and alpha-linolenic acid metabolism, and 28 differential metabolites were altered in the five MP-treated groups. Changes in intestinal bacteria were correlated with the haemolymph proteins and metabolites of the shrimp. Overall, these results reveal the toxicological effects of MPs on the intestinal microbiota and the host's immunity and metabolism in shrimp.

2D single crystal Bragg-dip mapping by time-of-flight energy-resolved neutron imaging on IMAT@ISIS.

The cold neutron imaging and diffraction instrument IMAT, at the second target station of the pulsed neutron and muon source ISIS, is used to investigate bulk mosaicity within as-cast single crystal CMSX-4 and CMSX-10 Ni-base superalloys. Within this study, neutron transmission spectrum is recorded by each pixel within the microchannel plate image detector. The movement of the lowest transmission wavelength within a specified Bragg-dip for each pixel is tracked. The resultant Bragg-dip shifting has enabled crystallographic orientation mapping of bulk single crystal specimens with good spatial resolution. The total acquisition time required to collect sufficient statistics for each test is ~ 3 h. In this work, the influence of a change in bulk solidification conditions on the variation in single crystal mosaicity was investigated. Misorientation of the (001) crystallographic plane has been visualised and a new spiral twisting solidification phenomena observed. This proof of concept work establishes time-of-flight energy-resolved neutron imaging as a fundamental characterisation tool for understanding and visualising mosaicity within metallic single crystals and provides the foundation for post-mortem deduction of the shape of the solid/liquid isotherm.

Correction to: The effect of teprenone on the intestinal morphology and microbial community of Chinese sea bass (Lateolabrax maculatus) under intermittent hypoxic stress.

In the end of the Discussion section, following information should be included.

The effect of teprenone on the intestinal morphology and microbial community of Chinese sea bass (Lateolabrax maculatus) under intermittent hypoxic stress.

Hypoxia stress may affect the fish intestine and thereby threaten the growth and survival of the fish. Teprenone is a clinically effective agent in protecting gastrointestinal mucosa. This study aims to assess the effect of teprenone in the intestine of Chinese sea bass Lateolabrax maculatus under intermittent hypoxic stress. L. maculatus juveniles were either raised under intermittent hypoxic condition or normal condition (NC). Part of the hypoxic-intervened fish were treated with teprenone at different concentrations (HTs), and the rest were regarded as hypoxic control (HC). Histological analysis was performed on the epithelial tissue of the fish intestine. High-throughput sequencing technology was used to analyze the diversity and composition of the microbial community in L. maculatus intestine. Reduced villi length and goblet cell, exfoliated enterocyte, and improper arrangement of villi were observed in HC compared with NC and HTs. Proteobacteria, Firmicutes, and Bacteroidetes represented the most abundant phyla in each sample. Significantly higher microbial diversity was detected in HC compared with NC (P < 0.05). At the phylum level, HC presented significantly decreased relative abundance of Proteobacteria, and significantly increased relative abundance of Bacteroidetes, Chloroflex, and Cyanobacteria compared with NC (P < 0.05). At the class level, HC showed significantly reduced relative abundance of Alphaproteobacteria and Bacilli, and significantly increased relative abundance of Clostridia, Gammaproteobacteria, and Bacteroides (P < 0.05). Teprenone protects the intestine from epithelial damages and maintains the microbial harmony in L. maculatus under intermittent hypoxic stress.

Prediction of re-oxidation behaviour of ultra-low carbon steel by different slag series.

A kinetic model was developed using FactSage Macro Processing to simulate the re-oxidation of ultra-low carbon steel via different oxidising slags. The calculated results show good agreement with experimental laboratory thermal simulation data. Therefore, the model can be used to predict the change behaviour of slag-metal-inclusion in the re-oxidation reaction of liquid steel. It can provide prediction and guidance for an accurate secondary oxidation control process. During the slag re-oxidation process, when the oxygen in the steel is supersaturated and the slag is low in oxidation, it can easily form stick-like and dendritic shape inclusions of Al2O3 in steel. As the (FeO) content increases in slag, the oxygen transfer from slag to steel is evident, and the inclusion size increases, showing clusters and spherical shapes. In addition, supersaturated oxygen in steel easily forms unstable Al2O3-TiOx inclusions with [Ti]. As the components of liquid steel tend to be uniform, the Al2O3-TiOx inclusions will decompose and disappear, forming stable Al2O3 and TiO2 inclusions. The number of inclusions can be reduced by increasing the basicity and the ratio of CaO to Al2O3 in the initial slag.

Effects of Microcystis aeruginosa and microcystin-LR on intestinal histology, immune response, and microbial community in Litopenaeus vannamei.

Microcystis aeruginosa (MA) is a primary hazardous cyanobacteria species in aquatic ecosystems that can produce microcystin-LR (MC-LR), which harms aquatic animals. The intestine is an important target tissue for MA and MC-LR. In this study, we investigated the effects of MA and MC-LR exposure on the intestinal microbiota variation and immune responses of Litopenaeus vannamei. Shrimp were experimentally exposed to MA and MC-LR for 72 h. The results showed that both MA and MC-LR exposure caused marked histological variation and apoptosis characteristics and increased oxidative stress in the intestine. Furthermore, the relative expression levels of antimicrobial peptide genes (ALF, Crus, Pen-3) decreased, while those of pro-inflammatory cytokines (MyD88, Rel, TNF-a), a pattern-recognition receptor (TLR4) and a mediator of apoptosis (Casp-3) increased. MA and MC-LR exposure also caused intestinal microbiota variation, including decreasing microbial diversity and disturbing microbial composition. Specifically, the relative abundance of Proteobacteria decreased in the two stress groups; that of Bacteroidetes decreased in the MA group but increased in the MC-LR group, while Tenericutes varied inversely with Bacteroidetes. Our results indicate that MA and MC-LR exposure causes intestinal histopathological and microbiota variations and induces oxidative stress and immune responses in L. vannamei. In conclusion, this study reveals the negative effects of MA and MC-LR on the intestinal health of shrimp, which should be considered in aquaculture.

Protection of teprenone against hypoxia and reoxygenation stress in stomach and intestine of Lateolabrax maculatus.

Teprenone (geranylgeranylacetone) is one kind of safe and effective agent in gastrointestinal mucosa, which have been widely used in human and veterinary, but rarely used in aquaculture animals. In this study, Lateolabrax maculatus, an important economic fish species in southern China, was taken as the object of study to investigate the protective effect of teprenone on intestinal stress. The present study was designed to investigate the potential mechanism underlying the protection offered by teprenone to protect the gastrointestinal tract against hypoxia and reoxygenation injury of L. maculatus. (a) For oxidative stress parameters, SOD, CAT, and T-AOC in control group were higher than those in teprenone group. MDA content was significantly higher than that in teprenone group at N and 12h time points in intestine (P < 0.05), and at 12, 24, and 48 h time points in stomach. (b) For immune-associated proteins, LZM activity in the control group was lower than that in the teprenone group, and the difference between the two groups in stomach and intestine was significant at 12.48 h and 6.48 h time points, respectively (P < 0.05). Compared with time point N, the content of HSP70 in the control group increased at 0 h in intestine. At 0-48 h, intestine HSP70 content in the control group showed a gradually decreasing trend, which was higher than that in the teprenone group. (c) For apoptosis-related factors, the activity of Cyt-C, caspase9, and caspase3 increased first and then decreased in both groups. The content of Cyt-C in the control group was significantly higher than that in the teprenone group at N-3.6 h, and 3.48 h time points in stomach and intestine, respectively (P<0.05). The activity of caspase9 and caspase3 was higher than that in the teprenone group at N-48 h. Results indicated that acute hypoxia and reoxygenation cause the expression levels of oxidative stress and apoptosis-related factors in the stomach and intestine increased first and then decreased within 0-48 h. Acute hypoxia and reoxygenation also that causes the level of nonspecific immunity decreased first and then increased. A total of 400-mg/kg treatment of teprenone can protect stomach and intestinal tissues to a certain extent. It can effectively protect oxidative stress and apoptosis within 0-48 h after acute hypoxia and reoxygenation and enhance non-specific immunity.