RESUMO
Ultrasound vascular imaging (UVI) is a valuable tool for monitoring the physiological states and evaluating the pathological diseases. Advancing from conventional two-dimensional (2D) to three-dimensional (3D) UVI would enhance the vasculature visualization, thereby improving its reliability. Row-column array (RCA) has emerged as a promising approach for cost-effective ultrafast 3D imaging with a low channel count. However, ultrafast RCA imaging is often hampered by high-level sidelobe artifacts and low signal-to-noise ratio (SNR), which makes RCA-based UVI challenging. In this study, we propose a spatial-temporal similarity weighting (St-SW) method to overcome these challenges by exploiting the incoherence of sidelobe artifacts and noise between datasets acquired using orthogonal transmissions. Simulation, in vitro blood flow phantom, and in vivo experiments were conducted to compare the proposed method with existing orthogonal plane wave imaging (OPW), row-column-specific frame-multiply-and-sum beamforming (RC-FMAS), and XDoppler techniques. Qualitative and quantitative results demonstrate the superior performance of the proposed method. In simulations, the proposed method reduced the sidelobe level by 31.3 dB, 20.8 dB, and 14.0 dB, compared to OPW, XDoppler, and RC-FMAS, respectively. In the blood flow phantom experiment, the proposed method significantly improved the contrast-to-noise ratio (CNR) of the tube by 26.8 dB, 25.5 dB, and 19.7 dB, compared to OPW, XDoppler, and RC-FMAS methods, respectively. In the human submandibular gland experiment, it not only reconstructed a more complete vasculature but also improved the CNR by more than 15 dB, compared to OPW, XDoppler, and RC-FMAS methods. In summary, the proposed method effectively suppresses the side-lobe artifacts and noise in images collected using an RCA under low SNR conditions, leading to improved visualization of 3D vasculatures.
RESUMO
The use of lanthanide luminescence has advanced the field of remote temperature sensing. Luminescence intensity ratio methods relying on emission from two thermally coupled energy levels are popular but suffer from a limited temperature range. Here, we present a versatile luminescent thermometer: Ba(Sr)FBr(Cl):Sm2+. The Sm2+ ion benefits from multiple thermally coupled excited states to extend the temperature range and has strong parity-allowed 4f6â4f55d1 absorption to increase brightness. We conduct a comparative analysis of the temperature sensing performance of Sm2+ in BaFBr, BaFCl, SrFBr, and SrFCl and address the role of concentration, host, and Boltzmann equilibration. Different thermal coupling schemes, 5D1-5D0 and 4f55d1-5D0, and temperature-dependent lifetimes enable accurate sensing between 350 and 800 kelvin. Differences in 4f55d1-5D0 energy gap allows optimization for a temperature range of interest. This type of Sm2+-based thermometer holds great potential for temperature monitoring in the wide and relevant range up to 500°C.
RESUMO
Ultrasound localization microscopy (ULM) enables deep tissue microvascular imaging by localizing and tracking intravenously injected microbubbles circulating in the bloodstream. However, conventional localization techniques require spatially isolated microbubbles, resulting in prolonged imaging time to obtain detailed microvascular maps. Here, we introduce LOcalization with Context Awareness (LOCA)-ULM, a deep learning-based microbubble simulation and localization pipeline designed to enhance localization performance in high microbubble concentrations. In silico, LOCA-ULM enhanced microbubble detection accuracy to 97.8% and reduced the missing rate to 23.8%, outperforming conventional and deep learning-based localization methods up to 17.4% in accuracy and 37.6% in missing rate reduction. In in vivo rat brain imaging, LOCA-ULM revealed dense cerebrovascular networks and spatially adjacent microvessels undetected by conventional ULM. We further demonstrate the superior localization performance of LOCA-ULM in functional ULM (fULM) where LOCA-ULM significantly increased the functional imaging sensitivity of fULM to hemodynamic responses invoked by whisker stimulations in the rat brain.
Assuntos
Aprendizado Profundo , Microscopia , Ratos , Animais , Microscopia/métodos , Microbolhas , Ultrassonografia/métodos , Microscopia Intravital , Microvasos/diagnóstico por imagemRESUMO
Introduction: Osteoarthritis (OA) is a common inflammatory joint disease characterised by progressive cartilage destruction. Management of this condition remains a significant challenge, and new therapies are required. We investigated the protective effects of miR-106a mimics in a murine model of OA. Material and methods: This study was performed using both in vitro and in vivo OA models. Primary chondrocytes were isolated from female rats, with inflammation induced via treatment with lipopolysaccharide (LPS). Then the effects of a miR-106a mimic were examined based on the level of inflammatory cytokine production and apoptotic signalling following LPS stimulation. An in vivo rat model of OA was generated by injecting LPS into the anterior cruciate ligament, followed by treatment with miR-106a mimics. Then, inflammatory and apoptotic protein expression was assessed in the cartilage tissue. Results: Treatment with miR-106a mimic reduced the levels of inflammatory cytokines and apoptotic proteins in cartilage tissues following LPS-induced inflammation. Furthermore, the mimic ameliorated the expression of DR-6 mRNA and DR6, IκBα, and p65 proteins in chondrocytes. Similar effects were seen in the in vivo model, with the mimic attenuating expression of NF-κB, p65, IκBα, and DR6 proteins and improving histopathological outcomes in the chondrocytes of OA rats. Conclusions: Treatment with miR-106a mimic ameliorates inflammation in cartilage tissues of OA subjects by activating death receptor 6 via the NF-κB signalling pathway.
RESUMO
Acoustic radiation force (ARF)-based shear wave elastography (SWE) is a clinically available ultrasound imaging mode that noninvasively and quantitatively measures tissue stiffness. Current implementations of ARF-SWE are largely limited to 2-D imaging, which does not provide a robust estimation of heterogeneous tissue mechanical properties. Existing 3-D ARF-SWE solutions that are clinically available are based on wobbler probes, which cannot provide true 3-D shear wave motion detection. Although 3-D ARF-SWE based on 2-D matrix arrays have been previously demonstrated, they do not provide a practical solution because of the need for a high channel-count ultrasound system (e.g., 1024-channel) to provide adequate volume rates and the delicate circuitries (e.g., multiplexers) that are vulnerable to the long-duration "push" pulses. To address these issues, here we propose a new 3-D ARF-SWE method based on the 2-D row-column addressing (RCA) array which has a much lower element count (e.g., 256), provides an ultrafast imaging volume rate (e.g., 2000 Hz), and can withstand the push pulses. In this study, we combined the comb-push shear elastography (CUSE) technique with 2-D RCA for enhanced SWE imaging field-of-view (FOV). In vitro phantom studies demonstrated that the proposed method had robust 3-D SWE performance in both homogenous and inclusion phantoms. An in vivo study on a breast cancer patient showed that the proposed method could reconstruct 3-D elasticity maps of the breast lesion, which was validated using a commercial ultrasound scanner. These results demonstrate strong potential for the proposed method to provide a viable and practical solution for clinical 3-D ARF-SWE.
Assuntos
Técnicas de Imagem por Elasticidade , Humanos , Técnicas de Imagem por Elasticidade/métodos , Ultrassonografia , Movimento (Física) , Imagens de Fantasmas , AcústicaRESUMO
Increasing evidence has suggested a link between cerebrovascular disease and the cognitive impairment associated with Alzheimer's disease. However, detailed descriptions of microvascular changes across brain regions and how they relate to other more traditional pathology have been lacking. Additionally, the efforts to elucidate the interplay between cerebral microvascular function and Alzheimer's disease progression are complicated by the necessity of probing deep-brain structures since early-stage Alzheimer's disease typically involves hippocampal pathology. The purpose of this study was to examine changes in microvascular dynamics in a mouse model of Alzheimer's disease using cohorts that were age-matched to wild-type controls. Data from both sexes were included in this study. Super-resolution ultrasound localization microscopy revealed microvascular functional and structural features throughout the whole brain depth to visualize and quantify. We found that functional decreases in hippocampal and entorhinal flow velocity preceded structural derangements in regional vascular density. Co-registered histological sectioning confirmed the regionalized perfusion deficits seen on ultrasound imaging, which were co-localized with amyloid beta plaque deposition. In addition to providing global vascular quantifications of deep brain structures with a high local resolution, this technology also permitted velocity-profile analysis of individual vessels and, in some cases, allowed for decoupling of arterial and venous flow contributions. These data suggest that microvascular pathology is an early and pervasive feature of Alzheimer's disease and may represent a novel therapeutic target for this disease.
Assuntos
Doença de Alzheimer , Disfunção Cognitiva , Masculino , Camundongos , Feminino , Animais , Doença de Alzheimer/complicações , Doença de Alzheimer/diagnóstico por imagem , Doença de Alzheimer/patologia , Peptídeos beta-Amiloides/metabolismo , Encéfalo/diagnóstico por imagem , Encéfalo/metabolismo , Modelos Animais de Doenças , UltrassonografiaRESUMO
Cuttage is the preferred approach for rapid propagation of many species including tea plant (Camellia sinensis). Leaf serves as a key part of nodal cutting, but there is a lack of systematic research on its role in the cutting process. In this study, 24 tea cultivars were employed to prove the necessity of leaf and light during cuttage. Further leaf physiological parameters found that lower net photosynthesis rate probably promoted rooting. Phytohormone content detection showed that auxin content and composition pattern were related to rooting ability. Leaf transcriptome analyses of cuttings from a representative easy-to-root cultivar (cv. Echa 10) revealed that genes involved in carbohydrate metabolism, signal transduction, metabolite biosynthesis and transportation were differentially expressed during the rooting process. CsTSA1, CsYUC10, CsAUX1s, CsPIN3 and CsPIN5 were selected as the candidate genes, which possibly regulate the rooting of nodal cuttings. These results illustrate the necessity of the leaf in cuttage and provide molecular evidence that leaf is an important place for signal transduction, metabolite synthesis and transport during the rooting process.
Assuntos
Camellia sinensis , Camellia sinensis/genética , Perfilação da Expressão Gênica , Fotossíntese , Chá/metabolismo , Folhas de Planta/genética , Folhas de Planta/metabolismo , Transcriptoma , Regulação da Expressão Gênica de Plantas , Proteínas de Plantas/genética , Proteínas de Plantas/metabolismoRESUMO
Photoacoustic computed tomography (PACT) is a proven technology for imaging hemodynamics in deep brain of small animal models. PACT is inherently compatible with ultrasound (US) imaging, providing complementary contrast mechanisms. While PACT can quantify the brain's oxygen saturation of hemoglobin (sO2), US imaging can probe the blood flow based on the Doppler effect. Further, by tracking gas-filled microbubbles, ultrasound localization microscopy (ULM) can map the blood flow velocity with sub-diffraction spatial resolution. In this work, we present a 3D deep-brain imaging system that seamlessly integrates PACT and ULM into a single device, 3D-PAULM. Using a low ultrasound frequency of 4 MHz, 3D-PAULM is capable of imaging the whole-brain hemodynamic functions with intact scalp and skull in a totally non-invasive manner. Using 3D-PAULM, we studied the mouse brain functions with ischemic stroke. Multi-spectral PACT, US B-mode imaging, microbubble-enhanced power Doppler (PD), and ULM were performed on the same mouse brain with intrinsic image co-registration. From the multi-modality measurements, we future quantified blood perfusion, sO2, vessel density, and flow velocity of the mouse brain, showing stroke-induced ischemia, hypoxia, and reduced blood flow. We expect that 3D-PAULM can find broad applications in studying deep brain functions on small animal models.
RESUMO
Super-resolution ultrasound microvessel imaging based on ultrasound localization microscopy (ULM) is an emerging imaging modality that is capable of resolving micrometer-scaled vessels deep into tissue. In practice, ULM is limited by the need for contrast injection, long data acquisition, and computationally expensive postprocessing times. In this study, we present a contrast-free super-resolution power Doppler (CS-PD) technique that uses deep networks to achieve super-resolution with short data acquisition. The training dataset is comprised of spatiotemporal ultrafast ultrasound signals acquired from in vivo mouse brains, while the testing dataset includes in vivo mouse brain, chicken embryo chorioallantoic membrane (CAM), and healthy human subjects. The in vivo mouse imaging studies demonstrate that CS-PD could achieve an approximate twofold improvement in spatial resolution when compared with conventional power Doppler. In addition, the microvascular images generated by CS-PD showed good agreement with the corresponding ULM images as indicated by a structural similarity index of 0.7837 and a peak signal-to-noise ratio (PSNR) of 25.52. Moreover, CS-PD was able to preserve the temporal profile of the blood flow (e.g., pulsatility) that is similar to conventional power Doppler. Finally, the generalizability of CS-PD was demonstrated on testing data of different tissues using different imaging settings. The fast inference time of the proposed deep neural network also allows CS-PD to be implemented for real-time imaging. These features of CS-PD offer a practical, fast, and robust microvascular imaging solution for many preclinical and clinical applications of Doppler ultrasound.
Assuntos
Microvasos , Ultrassonografia Doppler , Embrião de Galinha , Humanos , Camundongos , Animais , Microvasos/diagnóstico por imagem , Ultrassonografia Doppler/métodos , Ultrassonografia/métodos , Redes Neurais de Computação , GalinhasRESUMO
Three-dimensional ultrasound imaging has many advantages over 2-D imaging such as more comprehensive tissue evaluation and less operator dependence. However, developing a low-cost and accessible 3-D ultrasound solution with high volume rate and imaging quality remains a challenging task. Recently, we proposed a 3-D ultrasound imaging technique: fast acoustic steering via tilting electromechanical reflectors (FASTER), which uses a fast-tilting acoustic reflector to steer ultrafast plane waves elevationally to achieve high-volume-rate 3-D imaging with conventional 1-D transducers. However, the initial FASTER implementation requires a water tank for acoustic wave conduction and cannot be conveniently used for regular handheld scanning. To address these limitations, here, we developed a novel ultrasound probe clip-on device that encloses a fast-tilting reflector, a redirecting reflector, and an acoustic wave conduction medium. The new FASTER 3-D imaging device can be easily attached to or removed from clinical ultrasound transducers, allowing rapid transformation from 2-D to 3-D imaging. In vitro B-mode studies demonstrated that the proposed method provided comparable imaging quality to conventional, mechanical-translation-based 3-D imaging while offering a much faster volume rate (e.g., 300 versus â¼ 10 Hz). We also demonstrated 3-D power Doppler (PD) and 3-D super-resolution ultrasound localization microscopy (ULM) with the FASTER device. An in vivo imaging study showed that the FASTER device could clearly visualize the 3-D anatomy of the basilic vein. These results suggest that the newly developed redirecting reflector and the clip-on device could overcome key hurdles for future clinical translation of the FASTER 3-D imaging technology.
Assuntos
Imageamento Tridimensional , Ultrassonografia Doppler , Ultrassonografia/métodos , Ultrassonografia Doppler/métodos , Acústica , Transdutores , Imagens de FantasmasRESUMO
Ultrasound localization microscopy is a super-resolution imaging technique that exploits the unique characteristics of contrast microbubbles to side-step the fundamental trade-off between imaging resolution and penetration depth. However, the conventional reconstruction technique is confined to low microbubble concentrations to avoid localization and tracking errors. Several research groups have introduced sparsity- and deep learning-based approaches to overcome this constraint to extract useful vascular structural information from overlapping microbubble signals, but these solutions have not been demonstrated to produce blood flow velocity maps of the microcirculation. Here, we introduce Deep-SMV, a localization free super-resolution microbubble velocimetry technique, based on a long short-term memory neural network, that provides high imaging speed and robustness to high microbubble concentrations, and directly outputs blood velocity measurements at a super-resolution. Deep-SMV is trained efficiently using microbubble flow simulation on real in vivo vascular data and demonstrates real-time velocity map reconstruction suitable for functional vascular imaging and pulsatility mapping at super-resolution. The technique is successfully applied to a wide variety of imaging scenarios, include flow channel phantoms, chicken embryo chorioallantoic membranes, and mouse brain imaging. An implementation of Deep-SMV is openly available at https://github.com/chenxiptz/SR_microvessel_velocimetry, with two pre-trained models available at https://doi.org/10.7910/DVN/SECUFD.
Assuntos
Memória de Curto Prazo , Microbolhas , Animais , Camundongos , Embrião de Galinha , Ultrassonografia/métodos , Microvasos/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Redes Neurais de ComputaçãoRESUMO
Ultrafast ultrasound imaging is essential for advanced ultrasound imaging techniques such as ultrasound localization microscopy (ULM) and functional ultrasound (fUS). Current ultrafast ultrasound imaging is challenged by the ultrahigh data bandwidth associated with the radio frequency (RF) signal, and by the latency of the computationally expensive beamforming process. As such, continuous ultrafast data acquisition and beamforming remain elusive with existing software beamformers based on CPUs or GPUs. To address these challenges, the proposed work introduces a novel method of implementing an ultrafast ultrasound beamformer specifically for ultrafast plane wave imaging (PWI) on a field programmable gate array (FPGA) by using high-level synthesis. A parallelized implementation of the beamformer on a single FPGA was proposed by 1) utilizing a delay compression technique to reduce the delay profile size, which enables both run-time pre-calculated delay profile loading from external memory and delay reuse, 2) vectorizing channel data fetching which is enabled by delay reuse, and 3) using fixed summing networks to reduce consumption of logic resources. Our proposed method presents two unique advantages over current FPGA beamformers: 1) high scalability that allows fast adaptation to different FPGA resources and beamforming speed demands by using Xilinx High-Level Synthesis as the development tool, and 2) allow a compact form factor design by using a single FPGA to complete the beamforming instead of multiple FPGAs. Current Xilinx FPGAs provide the capabilities of connecting up to 1024 ultrasound channels with a single FPGA and the newest JESD204B interface analog front end (AFE). This channel count is much more than the channel count needed by current linear arrays, which normally have 128 or 256 channels. With the proposed method, a sustainable average beamforming rate of 4.83 G samples/second in terms of input raw RF sample was achieved. The resulting image quality of the proposed beamformer was compared with the software beamformer on the Verasonics Vantage system for both phantom imaging and in vivo imaging of a mouse brain. Multiple imaging schemes including B-mode, power Doppler and ULM were assessed to verify that the image quality was not compromised for speed.
Assuntos
Aumento da Imagem , Interpretação de Imagem Assistida por Computador , Animais , Camundongos , Aumento da Imagem/métodos , Interpretação de Imagem Assistida por Computador/métodos , Desenho de Equipamento , Ultrassonografia/métodos , Software , Imagens de Fantasmas , Algoritmos , Processamento de Imagem Assistida por Computador/métodosRESUMO
Listeria monocytogenes is a widespread foodborne pathogen contaminating foods during their production or processing stages. Fresh meat is susceptible to such contamination if it is not properly preserved. Our study was conducted to reveal the level of contamination and prevalence of Listeria spp. present in livestock and poultry meat from Gansu province. A total of 1,387 samples were collected from five cities in Gansu Province according to standard sampling procedures, of which 174 samples (12.5%) were positive for Listeria species. Among them, 14 isolates of L. monocytogenes (1.0%), 150 isolates of Listeria innocua (10.8%), and ten isolates of Listeria welshimeri (0.7%) were identified by conventional bacteriological and molecular identification methods. All isolates were subjected to serological assays, antimicrobial susceptibility tests, growth curve assays, determination of biofilm-forming capacity, and cluster analysis of the 16S rRNA gene sequences. Four predominant serotypes of L. monocytogenes were identified, including 1/2a (35.7%, 5/14), 1/2b (14.3%, 2/14), 1/2c (42.9%, 6/14), and 4b (7.1%, 1/14). All L. monocytogenes isolates were resistant to tetracycline and cefoxitin. Most L. innocua isolates (63.6%, 14/22) and L. welshimeri (40%, 4/10) were resistant to tetracycline. The high biofilm-forming ability was observed among 1/2c and 1/2a serotype isolates. The cluster analysis of the 16S rRNA gene sequences revealed a close genetic relationship between the three Listeria species. This study fills the gap in the knowledge of livestock and poultry meat that carry Listeria in slaughterhouses and markets in Gansu Province.
Assuntos
Listeria monocytogenes , Listeria , Animais , Gado , Microbiologia de Alimentos , Prevalência , RNA Ribossômico 16S , Aves Domésticas , Sorotipagem , Listeria/genética , Carne , TetraciclinasRESUMO
3-D ultrasound imaging has many advantages over 2-D imaging such as more comprehensive tissue evaluation and less operator dependence. Although many 3-D ultrasound imaging techniques have been developed in the last several decades, a low-cost and accessible solution with high imaging volume rate and imaging quality remains elusive. Recently we proposed a new, high volume rate 3-D ultrasound imaging technique: Fast Acoustic Steering via Tilting Electromechanical Reflectors (FASTER), which uses a water-immersible and fast-tilting acoustic reflector to steer ultrafast plane waves in the elevational direction to achieve high volume rate 3-D ultrasound imaging with conventional 1-D array transducers. However, the initial implementation of FASTER imaging only involves a single fast-tilting acoustic reflector, which is inconvenient to use because the probe cannot be held in the regular upright position. Also, conventional FASTER imaging can only be performed inside a water tank because of the necessity of using water for acoustic conduction. To address these limitations of conventional FASTER, here we developed a novel ultrasound probe clip-on device that encloses a fast-tilting reflector, a redirecting reflector, and an acoustic wave conduction medium. The new FASTER 3-D imaging device can be easily attached to or removed from clinical ultrasound transducers, allowing rapid transformation from 2-D to 3-D ultrasound imaging. In vitro B-mode imaging studies demonstrated that the proposed method provided comparable imaging quality (e.g., spatial resolution and contrast-to-noise ratio) to conventional, mechanical-translation-based 3-D imaging while providing a much faster 3-D volume rate (e.g., 300 Hz vs âË»10 Hz). In addition to B-mode imaging, we also demonstrated 3-D power Doppler imaging and 3-D super-resolution ultrasound localization microscopy with the newly developed FASTER device. An in vivo imaging study showed that the FASTER device could clearly visualize the 3-D anatomy of the basilic vein of a healthy volunteer, and customized beamforming was implemented to accommodate the speed of sound difference between the acoustic medium and the imaging object (e.g., soft tissue). These results suggest that the newly developed redirecting reflector and the clip-on device could overcome key hurdles for future clinical translation of the FASTER 3-D imaging technology.
RESUMO
Context: With the rapidly aging population globally, osteoporosis (OP) has become a major public health problem, and fracture is a common complication of OP. Older adults, especially postmenopausal women, have a higher incidence of OP. Objective: The study intended to analyze the clinical information, epidemiological characteristics, treatments, and follow-up results of patients with osteoporotic fractures (OPFs) in adults over 65 years old, to provide data support for the prevention, treatment, and use of OPF focus groups in clinical practice. Design: The research team performed a retrospective analysis using electronic medical records and related imaging data of patients. Setting: The study took place at Hebei General Hospital in Hebei, China. Participants: Participants were 387 patients over 65 years old with osteoporotic fractures who had been admitted to the hospital between July 2012 and July 2018. Outcome Measures: The research team recorded participants' ages, genders, fracture causes, and fracture sites. The team performed a follow-up analysis on refractures, treatment with anti-osteoporotic drugs, exercise, and survival status within the 3 years after surgery. Results: The study's male-to-female ratio was 1:3.1, and the rate of osteoporotic fracture for females was significantly higher than that of males. The mean age of participants with fractures was 75.6 ± 8.5 years, and most fractures occurred in participants 78 to 85 years old. Of the 387 participants, 169 participants had hip fractures (43.67%); 98 had vertebral compression fractures (25.32%); 51 had distal radius and ulna fractures (13.18%); 42 had proximal humerus fractures (10.85%); and 27 had other fractures (6.98%). The number of women with fractures at each site was greater than the number of men, but the differences weren't statistically significant (P > .05). The main causes of injury were falls (71.58%), and the main place of the occurrence of injury was at home (65.6%). Of the 387 participants, 346 had surgical treatment (89.41%), and the effective rate of surgical treatment was 99.42%. Three years after surgery, the research team followed up with 235 participants, for a follow-up rate of 60.72%. Within the 3 years of the follow-up period, 61 participants had refractures (25.63%), 29 received treatment with regular anti-osteoporotic drugs (12.34%), 36 exercised twice or more a week (15.32%), and 32 had died for various reasons (13.62%). Conclusions: The study preliminarily described the epidemiological characteristics of 387 osteoporotic fractures in adults over 65 years old. More women had fractures than men; the hip was the most common fracture site, and falls were the main cause of injury. Most of the fractures occurred in the place of residence, and the refracture rate was 25.96% at three years after surgery.
Assuntos
Fraturas por Compressão , Osteoporose , Fraturas por Osteoporose , Fraturas da Coluna Vertebral , Feminino , Humanos , Masculino , Idoso , Idoso de 80 Anos ou mais , Fraturas por Osteoporose/epidemiologia , Fraturas por Osteoporose/cirurgia , Estudos Retrospectivos , Osteoporose/complicações , Osteoporose/epidemiologia , Osteoporose/tratamento farmacológicoRESUMO
Deep Neural Networks (DNN) form a powerful deep learning model that can process unprecedented volumes of data. The hyperparameters of DNN have a significant influence on its prediction performance. Evolutionary algorithms (EAs) form a heuristic-based approach that provides an opportunity to optimize deep learning models to obtain good performance. Therefore, we propose an evolutionary deep learning model called IPSO-DNN based on DNN for prediction and an improved Particle Swarm Optimization (IPSO) algorithm to optimize the kernel hyperparameters of DNN in a self-adaptive evolutionary way. In the IPSO algorithm, a micro population size setting is introduced to improve the search efficiency of the algorithm, and the generalized opposition-based learning strategy is used to guide the population evolution. In addition, the IPSO algorithm employs a self-adaptive update strategy to prevent premature convergence and then improves the exploitation and exploration parameter optimization performance of DNN. In this paper, we show that the IPSO algorithm provides an efficient approach for tuning the hyperparameters of DNN with saving valuable computational resources. We explore the proposed IPSO-DNN model to predict the effect of social distancing on the spread of COVID-19 based on the social distancing metrics. The preliminary experimental results reveal that the proposed IPSO-DNN model has the least computation cost and yields better prediction accuracy results when compared to the other models. The experiments of the IPSO-DNN model also illustrate that aggressive and extensive social distancing interventions are crucial to help flatten the COVID-19 epidemic curve in the United States.
RESUMO
Objectives: Medial patellofemoral ligament (MPFL) reconstruction is an important surgical therapy for recurrent patellar dislocation. However, few studies have focused on exercise therapy after MPFL reconstruction. Therefore, the first purpose was to compare the active and traditional postoperative exercise therapies on the recovery of knee joint function and reduction of muscle atrophy after MPFL reconstruction, and the second purpose was to compare the active and traditional postoperative exercise therapies on the patellar stability after MPFL reconstruction. Methods: The cases of 31 patients with recurrent patellar dislocation treated with patella double semi-tunnel anatomical MPFL reconstruction from February 2016 and February 2019 were retrospectively reviewed. The clinical outcomes, including the patellar tilt angle (PTA), lateral patellofemoral angle (LPFA), thigh circumference reduction, Kujala score, and Lysholm score, were compared between two groups (i.e., active exercise and traditional exercise groups) preoperatively, 3 months postoperatively, 6 months postoperatively, 12 months postoperatively, and 24 months postoperatively. Results: The Kujala score was significantly higher in the active exercise group than traditional exercise group 3 months postoperatively (80.06 vs. 74.80, P < 0.01), 6 months postoperatively (89.19 vs. 82.07, P < 0.01), 12 months postoperatively (91.43 vs. 86.60, P < 0.01), and 24 months postoperatively (92.50 vs. 90.27, P = 0.02). Similarly, there was a higher Lysholm score in the active exercise group compared with traditional exercise group 3 months postoperatively (81.25 vs. 76.53, P < 0.01), 6 months postoperatively (89.81 vs. 84.80, P < 0.01), 12 months postoperatively (93.25 vs. 88.40, P < 0.01), and 24 months postoperatively (93.69 vs. 90.67, P < 0.01). Significantly lower thigh circumference reduction was reported in the active exercise group compared with that in the traditional exercise group 3 months postoperatively (1.90 ± 0.57 vs. 2.45 ± 0.45, P < 0.01) and 6 months postoperatively (1.50 ± 0.31 vs. 1.83 ± 0.32, P < 0.01). No statistical difference was observed between the two groups in terms of PTA (P > 0.05) or LPFA postoperatively (P > 0.05). Conclusions: Our results suggested that active exercise therapy might benefit the early recovery of knee joint function and reduction of muscle atrophy in patients with recurrent patellar dislocation after MPFL reconstruction.
RESUMO
Biochar and nitrogen (N) fertilizer application can increase soil carbon sequestration and enhance soil nutrient cycling. However, few studies have systematically explored the effects of the long-term application of biochar and N fertilizer on soil multifunctionality and characterized its driving factors. Based on an 8-year biochar paddy-field experiment in anthropogenic alluvial alkaline soil in northwest China, we measured eleven soil functions associated with soil carbon sequestration and nutrient cycling and four potential factors (soil bacterial and fungal richness, pH, and aggregates) governing soil functions to investigate the effects of three biochar rates (C0, no biochar; C1, 4.5 t ha-1 year-1; C2, 13.5 t ha-1 year-1) and two N fertilizer rates (N0, no N fertilizer; N1, 300 kg N ha-1 year-1) on individual soil ecosystem functions and soil multifunctionality. Our results showed that biochar and N fertilizer application increased soil organic carbon (SOC) by 20-58 % and total N content by 9.3-15 % and had a varied effect (but mainly positive) on the activity of enzymes associated with soil carbon, N, and phosphorus cycling. Different application rates of biochar and N fertilizer had no influence on soil DNA concentrations, but did change soil microbial diversity, soil aggregation, and pH. The carbon storage function (SOC content) of soils is an important predictor of multifunctionality. Long-term biochar and N fertilizer application indirectly explained soil multifunctionality by altering soil pH, whereas bacterial and fungal diversity and soil aggregates did not play significant roles in explaining soil multifunctionality. These findings suggest that the application of biochar and N fertilizer can enhance soil multifunctionality by directly improving the individual functions [soil carbon sequestration (SOC content)] and decreasing soil pH in alkaline paddy fields.
Assuntos
Fertilizantes , Solo , Solo/química , Nitrogênio/análise , Carbono , Ecossistema , Carvão Vegetal/química , Fósforo , Concentração de Íons de Hidrogênio , Microbiologia do SoloRESUMO
Ultrasound localization microscopy (ULM) based on microbubble (MB) localization was recently introduced to overcome the resolution limit of conventional ultrasound. However, ULM is currently challenged by the requirement for long data acquisition times to accumulate adequate MB events to fully reconstruct vasculature. In this study, we present a curvelet transform-based sparsity promoting (CTSP) algorithm that improves ULM imaging speed by recovering missing MB localization signal from data with very short acquisition times. CTSP was first validated in a simulated microvessel model, followed by the chicken embryo chorioallantoic membrane (CAM), and finally, in the mouse brain. In the simulated microvessel study, CTSP robustly recovered the vessel model to achieve an 86.94% vessel filling percentage from a corrupted image with only 4.78% of the true vessel pixels. In the chicken embryo CAM study, CTSP effectively recovered the missing MB signal within the vasculature, leading to marked improvement in ULM imaging quality with a very short data acquisition. Taking the optical image as reference, the vessel filling percentage increased from 2.7% to 42.2% using 50ms of data acquisition after applying CTSP. CTSP used 80% less time to achieve the same 90% maximum saturation level as compared with conventional MB localization. We also applied CTSP on the microvessel flow speed maps and found that CTSP was able to use only 1.6s of microbubble data to recover flow speed images that have similar qualities as those constructed using 33.6s of data. In the mouse brain study, CTSP was able to reconstruct the majority of the cerebral vasculature using 1-2s of data acquisition. Additionally, CTSP only needed 3.2s of microbubble data to generate flow velocity maps that are comparable to those using 129.6s of data. These results suggest that CTSP can facilitate fast and robust ULM imaging especially under the circumstances of inadequate microbubble localizations.