Colony identity clues for Syntermes grandis (Blattodea: Termitidae) individuals using near-infrared spectroscopy and PLS-DA approach.

Termites are social insects with high species diversity in tropical ecosystems. Multivariate analysis with near-infrared spectroscopy (NIRS) and data interpretation can separate social insects belonging to different colonies of the same species. The objective of this study was to propose the use of discriminant analysis by partial least squares (PLS-DA) combined with NIRS to identify the colonial origin of the Syntermes grandis (Rambur, 1842) (Blattodea: Termitidae) in 2 castes. Six ground S. grandis colonies were identified and mapped; 30 workers and 30 soldier termites in each colony were submitted to spectral measurement with NIRS. PLS-DA applied to the termites' spectral absorbance was used to detect a spectral pattern per S. grandis colony by caste. PLS-DA regression with NIRS proved to be an approach with 99.9% accuracy for identifying the colonial origin of S. grandis workers and 98.3% for soldiers. The methodology showed the importance of qualitatively characterizing the colonial phenotypic response of this species. NIRS is a high-precision approach to identifying the colony origin of S. grandis workers and soldiers. The PLS-DA can be used to design ecological field studies to identify colony territorial competition and foraging behavior of subterranean termite species.

A novel honeycomb-like 3D-printed device for rotating-disk sorptive extraction of organochlorine and organophosphorus pesticides from environmental water samples.

In this study, 3D-printing based on fused-deposition modeling (FDM) was employed as simple and cost-effective strategy to fabricate a novel format of rotating-disk sorptive devices. As proof-of-concept, twenty organochlorine and organophosphorus pesticides were determined in water samples through rotating-disk sorptive extraction (RDSE) using honeycomb-like 3D-printed disks followed by gas chromatography coupled to mass spectrometry (GC-MS). The devices that exhibited the best performance were comprised of polyamide + 15 % carbon fiber (PA + 15 % C) with the morphology being evaluated through X-ray microtomography. The optimized extraction conditions consisted of 120 min of extraction using 20 mL of sample at stirring speed of 1100 rpm. Additionally, liquid desorption using 800 µL of acetonitrile for 25 min at stirring speed of 1100 rpm provided the best response. Importantly, the methodology also exhibited high throughput since an extraction/desorption platform that permitted up to fifteen simultaneous extractions was employed. The method was validated, providing coefficients of determination higher than 0.9706 for all analytes; limits of detection (LODs) and limits of quantification (LOQs) ranged from 0.15 to 3.03 µg L-1 and from 0.5 to 10.0 µg L-1, respectively. Intraday precision ranged from 4.01 to 18.73 %, and interday precision varied from 4.83 to 20.00 %. Accuracy was examined through relative recoveries and ranged from 73.29 to 121.51 %. This method was successfully applied to analyze nine groundwater samples from monitoring wells of gas stations in São Paulo. Moreover, the greenness was assessed through AGREEprep metrics, and an overall score of 0.69 was obtained indicating that the method proposed can be considered sustainable.

Chilled Pacu (Piaractus mesopotamicus) fillets: Modeling Pseudomonas spp. and psychrotrophic bacteria growth and monitoring spoilage indicators by 1H NMR and GC-MS during storage.

This study aimed to assess the growth of Pseudomonas spp. and psychrotrophic bacteria in chilled Pacu (Piaractus mesopotamicus), a native South American fish, stored under chilling conditions (0 to 10 °C) through the use of predictive models under isothermal and non-isothermal conditions. Growth kinetic parameters, maximum growth rate (µmax, 1/h), lag time (tLag, h), and (Nmax, Log10 CFU/g) were estimated using the Baranyi and Roberts microbial growth model. Both kinetic parameters, growth rate and lag time, were significantly influenced by temperature (P < 0.05). The square root secondary model was used to describe the bacteria growth as a function of temperature. Secondary models, √µ = 0.016 (T + 10.13) and √µ =0.017 (T + 9.91) presented a linear correlation with R2 values >0.97 and were further validated under non-isothermal conditions. The model's performance was considered acceptable to predict the growth of Pseudomonas spp. and psychrotrophic bacteria in refrigerated Pacu fillets with bias and accuracy factors between 1.24 and 1.49 (fail-safe) and 1.45-1.49, respectively. Fish biomarkers and spoilage indicators were assessed during storage at 0, 4, and 10 °C. Volatile organic compounds, VOCs (1-hexanol, nonanal, octenol, and indicators 2-ethyl-1-hexanol) showed different behavior with storage time (P > 0.05). 1H NMR analysis confirmed increased enzymatic and microbial activity in Pacu fillets stored at 10 °C compared to 0 °C. The developed and validated models obtained in this study can be used as a tool for decision-making on the shelf-life and quality of refrigerated Pacu fillets stored under dynamic conditions from 0 to 10 °C.

Physical Activity and Sedentary Behavior as Treatable Traits for Clinical Control in Moderate-to-Severe Asthma.

BACKGROUND: Physical activity and sedentary behavior are treatable traits that may impact asthma control in distinct manners, but this impact remains poorly understood. OBJECTIVE: To evaluate the influence of physical activity and sedentary behavior on clinical control in adults with moderate-to-severe asthma. METHODS: This cross-sectional, multicentric study included 426 individuals with moderate-to-severe asthma. Assessments included physical activity and sedentary time (actigraphy), clinical asthma control (Asthma Control Questionnaire [ACQ]), quality of life (Asthma Quality of Life Questionnaire), anxiety and depression symptoms (Hospital Anxiety and Depression Scale), anthropometric data, and lung function. Participants were grouped according to physical activity levels and sedentary behavior. RESULTS: Participants who walked ≥7500 steps/day presented better ACQ scores than those who walked <7500 steps/day (P < .05), independent of sedentary status. The percentage of patients with controlled asthma was higher in the active/sedentary (43.9%) and active/nonsedentary (43.8%) groups than in the inactive/sedentary (25.4%) and inactive/nonsedentary (23.9%) groups (P < .02). The likelihood of having uncontrolled asthma according to the treatable traits of physical inactivity (odds ratio [95% confidence interval]: 2.36 [1.55-3.59]), higher anxiety (2.26 [1.49-3.42]), and depression symptoms (1.95 [1.28-2.95]) was significant (P ≤ .002). Obesity and sedentary time were not associated with asthma control. CONCLUSIONS: Our results show that ≥7500 steps/day is associated with better asthma control independent of sedentary time in adults with moderate-to-severe asthma. Physical inactivity, anxiety, and depression symptoms are associated with higher odds of uncontrolled asthma. These results suggest that interventions should mainly focus on increasing physical activity rather than reducing sedentary time.

Strategies for evidence-based in head and neck cancer: practical examples in developing systematic review questions.

A systematic review (SR) requires several steps to be conducted. A major and initial challenge is to formulate a focused research question that may have high scientific relevance to provide evidence-based results and strategies. This narrative mini-review aims to present different categories of systematic reviews currently applied in Head and Neck Cancers (HNC), focusing on the strategies to provide results for evidence-based decision making. The SRs identified were of intervention, diagnostic testing, prognosis, in vitro and in vivo studies, prevalence, and epidemiological studies, and of association and risk factors. Focused questions that define the type of review, whether it is a therapy question (intervention), a question of prevalence or an outcome (prognosis) of disease, are discussed. Additionally, the importance in building interesting research questions and following all proposed steps to produce quality evidence are highlighted. This narrative mini-review may guide future research by showing how to perform and report relevant evidence in terms of HNC.

Grade-4/5 motor activity log-Brazil for post-stroke individuals with a severely impaired upper limb: a validity, reliability and measurement error study.

PURPOSE: This study examined the clinimetrics of the Brazilian-Portuguese translation of the Grade-4/5 Motor Activity Log (MAL 4/5), which assesses everyday use of the more affected upper-limb (UL) in stroke survivors with moderate/severe or severe motor impairment. MATERIALS AND METHODS: The translated MAL 4/5 was administered to 47 stroke survivors with moderate/severe or severe UL motor impairment. Accelerometers were worn on participants' wrists for five days on average prior to the first assessment. Test-retest and inter-rater reliabilities were assessed using the intraclass correlation coefficient (ICC), internal consistency using Cronbach's α, and construct validity was tested with correlations with the accelerometry. The measurement error (SEM) and the minimal detectable change (MDC) were calculated. RESULTS: MAL4/5-Brazil's test-retest reliability (AOU: ICC = 0.84; QOU: ICC = 0.90), inter-rater reliability (AOU: ICC = 0.83; QOU: ICC = 0.91), internal consistency (Cronbach's α = 0.91 and 0.95 for AOU and QOU scales, respectively), the SEM and MDC were 0.3 and 0.8 points for the AOU subscale and 0.2 and 0.5 points for the QOU subscale, respectively. The construct validity (AOU scale: r = 0.67; QOU scale: r = 0.76) was high. CONCLUSION: Grade-4/5 Motor Activity Log-Brazil is a reliable and valid instrument for assessing the more-affected UL use of stroke patients with moderate/severe or severe UL motor impairments.

Reliability and concurrent validity of the Grade-4/5 MAL-Brazil were established in adults with hemiparesis moderate/severe or severe upper extremity post Stroke.The minimum detectable change for the Grade-4/5 MAL-Brazil was 0.8 points for the Amount of Use scale and 0.5 points for the Quality of Use scale.Data from the accelerometry supports the construct validity of this instrument.The assessment can now be used clinically and for research in adults with impairment upper extremity moderate/severe or severe post Stroke.

Photobiomodulation effects on fibroblasts and keratinocytes after ionizing radiation and bacterial stimulus.

OBJECTIVE: Photobiomodulation therapy (PBMT) has proven to reduce inflammation and pain and increase wound healing. Thus, the aim of this study was to analyze the effects of PBMT parameters on migration, proliferation, and gene expression after ionizing radiation and bacterial-induced stress in an in vitro study. DESIGN: Keratinocytes (HaCaT) and Fibroblasts (HGFs) were grown in DMEM with 10 % fetal bovine serum until stressful condition induction with lipopolysaccharide (LPS) of Escherichia coli (1 µg/mL), Porphyromonas gingivalis protein extract (5 µg/mL) and ionizing radiation (8 Gy). Low-laser irradiation (660 nm, 30 mW) was carried out in four sessions, with 6 h intervals, and energy density of 2, 3, 4, and 5 J/cm². Scratch assays, immunofluorescence, and RT-qPCR were performed. RESULTS: Treated fibroblasts and keratinocytes showed significant response in proliferation and migration after scratch assays (p < 0.05). Higher expressions of α-SMA in fibroblasts and F-actin in keratinocytes were observed in cells subjected to 3 J/cm². PI3K-pathway genes expression tended to enhance in fibroblasts, presenting a higher relative expression when compared to keratinocytes. In keratinocytes, PBMT groups demonstrated deregulated expression for all inflammatory cytokines' genes tested while fibroblasts presented a tendency to enhance those genes expression in a dose dependent way. CONCLUSIONS: The present study showed that delivering 660 nm, 30 mW was effective to stimulate cell migration, proliferation and to accelerate wound healing. PBMT can modulate cytokines and pathways involved in wound repair. The different energy densities delivering distinct responses in vitro highlights that understanding laser parameters is fundamental to improve treatment strategies.

Effect of incorporation of calcium polyphosphate sub-microparticles in low-concentration bleaching gels on physical properties of dental enamel.

AIM: To evaluate the bleaching efficacy and effects on enamel properties of experimental gels with carbamide peroxide (CP; 10%) or hydrogen peroxide (HP; 6%) containing calcium polyphosphate sub-microparticles (CaPPs). METHODS: A total of 216 bovine tooth specimens were divided for microhardness and color analyses (n = 108) and block randomized into nine groups (n = 12): (G1) commercial CP (Whiteness Perfect, FGM; Brazil); (G2) experimental CP; (G3) CP-0.5%CaPPs; (G4) CP-1.5%CaPPs; (G5) commercial HP (Potenza Bianco, PHS; Brazil); (G6) experimental HP; (G7) HP-0.5%CaPPs; (G8) HP-1.5%CaPPs; (G9) artificial saliva. The gels' pH values were determined with a bench pH meter. Color (ΔE, ΔE00, ΔWID) and microhardness variation were evaluated before and after the therapy. Part of the specimens used for microhardness was submitted to the scanning electron microscopy (SEM) (n = 3) and energy-dispersive X-ray spectroscopy EDX (n = 3) analyses. Statistical analyses were performed in the R statistical software (α = 0.05). Linear mixed models for repeated measures in time were used to analyze microhardness and L* values. Generalized linear models were used to analyze the a*, b*, ΔE, ΔE00, and ΔWID, considering a group effect. The EDX data were analyzed using a one-way ANOVA with Tukey's test. RESULTS: The gels' pH remained over 6,0. All gels effectively bleached the specimens and did not differ significantly. When compared to the control group, the hardness was significantly lower in the G1, G2, G6, and G7 groups. The G3, G4, G5, and G8 groups did not differ significantly (p > 0.05). CONCLUSION: The incorporation of CaPPs in low-concentration whitening gels reduces its negative effects on microhardness without interfering with their bleaching efficacy.

Detection of anti-SARS-CoV-2 salivary antibodies in vaccinated adults.

Since the introduction of efficient anti-SARS-CoV-2 vaccines, the detection of antibodies becomes useful for immunological monitoring and COVID-19 control. Therefore, this longitudinal study aimed to evaluate the detection of SARS-CoV-2 antibodies in the serum and saliva of COVID-19-vaccinated adults. The study included 13 not vaccinated and 35 vaccinated participants with two doses of CoronaVac (Sinovac/Butantan) vaccine who subsequently received BNT162b2 (Pfizer-BioNTech) vaccine as a booster dose. Vaccinated participants donated saliva and serum in three different time points. Enzyme-linked immunosorbent assay was used for antibody detection. In our results, the serum neutralizing antibodies (NAb) were detected in 34/35 samples after second dose and in 35/35 samples one and five months after the booster dose. In saliva, NAb were detected in 30/35 samples after second dose and in 35/35 of samples one and five months after the booster dose. IgA was detected in 19/34 saliva samples after second dose, in 18/35 one month after the booster and in 30/35 five months after. IgG in saliva was detected in 1/34 samples after second dose, 33/35 samples one month after the booster dose and in 20/35 five months after. A strong correlation was found between IgG and neutralizing activity in saliva, and salivary IgA would be a sign of recent exposure to the virus. In conclusion, saliva can be suitable for monitoring antibodies anti-SARS-CoV-2 after vaccination. Heterologous vaccination contributed to increase anti-SARS-CoV-2 antibodies in the Brazilian health context. Complementary studies with large groups are mandatory to conclude the interest in following mucosal immunity.

Poly(ɛ-caprolactone) and Eudragit E blends modulate the drug release profiles from FDM printlets.

Thermoplastic polymers have been used to produce filaments by hot melt extrusion (HME), which can be applied to obtain 3D printlets by fused deposition modelling (FDM). Poly(ε-caprolactone) (PCL) is a low melting point thermoplastic polymer that provides HME filaments with excellent mechanical and printability properties. However, due to the highly hydrophobic properties of PCL, they afford printlets with slow drug release behaviour. We hypothesized that blending a less hydrophobic polymer, the Eudragit E (EudE), with PCL could be an approach to increase the drug release rate from PCL 3D printlets. PCL and EudE were blended at different proportions, 50:50, 60:40, 70:30, and 80:20 (w/w), to produce HME filaments. They were produced with dexamethasone at 5 % (w/w) and were effectively extruded and printable by FDM, except that composed of 50:50 (w/w). Printlets had homogeneous distribution of their components. Their drug release behaviour was dependent on the ratio of the polymeric blends. The highest EudE ratio (60:40 w/w) afforded printlets showing the highest release rate. Therefore, adding up to 40 % (w/w) of EudE to PCL does not impair the mechanical and printability properties of its HME filaments. This innovative approach is proposed here to modulate the drug release behaviour from PCL printlets.

Carbonaceous adsorbent as green silica by-product applied to the treatment of contaminated effluent by pesticide commonly sprayed on rice cultivation.

Grain cultivation and its impacts on the environment have been the focus of many studies, especially due to generated solid waste and the wide use of agrochemicals aiming for greater productivity. In this context, the present study proposes a new and consistent step in constructing self-sustainability in rice farming. The proposed stage includes reusing green silica waste as an adsorbent to treat effluents contaminated by pesticides directly applied to rice cultivation. After nano silica production through the rice husks burning, followed by basic leaching and acid precipitation, a carbonaceous material remains. This material, naturally impregnated by Na2SiO3, was washed and dried, characterized, and used to remove the pesticide 2,4-dichlorophenoxyacetic acid (2,4-D). The adsorption essays were performed at 2,4-D at low concentrations (between 1 and 10 mg L-1) at different temperatures. The washed and dried porous carbon (WDPC) surface is irregular and presents slit-shaped channels. The FT-IR analysis identified the siloxane, carbonyl, carboxylate, and methylene functional groups available to interact with the pesticide molecules. The washing/drying process eliminated impurities, improving the surface area from 539.67 to 619.67 cm2 g-1 and pore volume from 0.29 to 0.44 cm3 g-1. Concerning the adsorption of 2,4-D on WDPC, the best pH was 6.0, where around 75% of the pesticide was removed from the water. The equilibrium isotherms presented an S-shaped form indicating a multilayer and cooperative adsorption, with maximum adsorption capacities of 7.504 and 7.736 mg g-1. The estimated ∆Gads, ΔHads, and ΔSads values suggested that pesticide adsorption was spontaneous, exothermic, and favorable. Finally, WDPC demonstrated a good potential to uptake 2,4-D from water, contributing to self-sustainability in rice farming.

Maintenance of enamel properties after bleaching with high-concentrated hydrogen-peroxide gel containing calcium polyphosphate sub-microparticles.

OBJECTIVE: To assessed the physical and chemical properties of human-enamel after treatment with an experimental bleaching gel containing 35%-hydrogen peroxide (HP) and calcium polyphosphate sub-microparticles (CaPP). MATERIALS AND METHODS: Enamel/dentin specimens (4 × 4 × 3 mm) were obtained (n = 120) and allocated to different groups: control (saliva only); experimental (HP35%); commercial (whiteness-HP-Maxx); CaPP0.5% (HP35% + CaPP0.5wt%); CaPP1.5% (HP35% + CaPP1.5wt%). Three sessions were performed. The specimens' color was assessed using a spectrophotometer and the color (ΔE/ΔE00) and bleaching index (ΔWID) determined. The surface roughness and microhardness were assessed with a roughness tester and Knoop indenter. Raman spectroscopy was performed to obtain the ratios between the areas under the 431, 580, and 1070 cm-1 and the 960 cm-1 bands (430:960, 580:960, 1070:960). Kruskal-Wallis and Dunn compared the color, Ra, and SMH data. The Raman data was analyzed with Kruskal-Wallis and Dunn (α = 5%). RESULTS: The ΔE, ΔE00, and ΔWID were similar among the bleached groups (p > 0.05). The roughness was not different between the groups (p > 0.05). After the 3rd session, CaPP0.5% had higher microhardness than the experimental (p < 0.05). The 1070:960 was higher in the experimental than in the CaPP1.5% and control (p < 0.05). CONCLUSIONS: In human enamel, CaPP did not alter the bleaching effectiveness or roughness, and additionally, CaPP-containing gels increased the microhardness and preserved the mineral content when compared to the experimental without CaPP. CLINICAL RELEVANCE: Experimental bleaching gels containing calcium polyphosphate sub-microparticles as a mineral source reduce the mineral content alteration and superficial microhardness reduction, known potential side effects of the in-office bleaching treatments.

Linking Intensive Care Unit functional scales to the International Classification of Functioning: proposal of a new assessment approach.

BACKGROUND: There are several tools to assess functional and physical status in critical ill patients. These tools can guide rehabilitation strategies in Intensive care units (ICU). However, they are not standardized, and this can compromise their applicability. The aim of the study is to identify common contents between International Classification of Functioning, Disability and Health (ICF) and Medical Research Council sum score (MRC-ss), Functional Status Score for the ICU (FSS-ICU), and Physical Function in ICU Test-scored (PFIT-s). As well as to propose a new assessment approach based on the ICF to ICU patients. METHODS: Pilot cross-sectional study. ICU in-patients, both genders, aged between 50 and 75 years were assessed with MRC-ss, FSS-ICU, PFIT-s and the linking rules used were proposed by Cieza et al. The inter-rater agreement for the linking process was performed using the Kappa coefficient. RESULTS: The ICF categories identified in the tools covered a total of 14 items. Common contents were identified in 13 of the 14 and two were related to body functions, six to body structures and five to activities and participation. The inter-rater agreement was considered substantial for the linking of MRC-ss (k = 0.665) and PFIT-s (k = 0.749) to the ICF, and almost perfect for the FSS-ICU (k = 0.832). CONCLUSIONS: This study synthesizes and categorizes commonly used tools and presents a new proposal based on the ICF to guide future studies. The proposed model combines the ICF with the contents of the most relevant instruments used in critical care.

Critical appraisal tools used in systematic reviews of in vitro cell culture studies: A methodological study.

Systematic reviews (SRs) of preclinical studies are marked with poor methodological quality. In vitro studies lack assessment tools to improve the quality of preclinical research. This methodological study aimed to identify, collect, and analyze SRs based on cell culture studies to highlight the current appraisal tools utilized to support the development of a validated critical appraisal tool for cell culture in vitro research. SRs, scoping reviews, and meta-analyses that included cell culture studies and used any type of critical appraisal tool were included. Electronic search, study selection, data collection and methodological quality (MQ) assessment tool were realized. Further, statistical analyses regarding possible associations and correlations between MQ and collected data were performed. After the screening process, 82 studies remained for subsequent analysis. A total of 32 different appraisal tools were identified. Approximately 60% of studies adopted pre-structured tools not designed for cell culture studies. The most frequent instruments were SYRCLE (n = 14), OHAT (n = 9), Cochrane Collaboration's tool (n = 7), GRADE (n = 6), CONSORT (n = 5), and ToxRTool (n = 5). The studies were divided into subgroups to perform statistical analyses. A significant association (OR = 5.00, 95% CI = 1.54-16.20, p = 0.008) was found between low MQ and chronic degenerative disorders as topic of SR. Several challenges in collecting information from the included studies led to some modifications related to the previously registered protocol. These results may serve as a basis for further development of a critical appraisal tool for cell culture studies capable of capturing all the essential factors related to preclinical research, therefore enhancing the practice of evidence-based.

Persistence of SARS-CoV-2 Antigens in the Nasal Mucosa of Eight Patients with Inflammatory Rhinopathy for over 80 Days following Mild COVID-19 Diagnosis.

The nasal mucosa is the main gateway for entry, replication and elimination of the SARS-CoV-2 virus, the pathogen that causes severe acute respiratory syndrome (COVID-19). The presence of the virus in the epithelium causes damage to the nasal mucosa and compromises mucociliary clearance. The aim of this study was to investigate the presence of SARS-CoV-2 viral antigens in the nasal mucociliary mucosa of patients with a history of mild COVID-19 and persistent inflammatory rhinopathy. We evaluated eight adults without previous nasal diseases and with a history of COVID-19 and persistent olfactory dysfunction for more than 80 days after diagnosis of SARS-CoV-2 infection. Samples of the nasal mucosa were collected via brushing of the middle nasal concha. The detection of viral antigens was performed using immunofluorescence through confocal microscopy. Viral antigens were detected in the nasal mucosa of all patients. Persistent anosmia was observed in four patients. Our findings suggest that persistent SARS-CoV-2 antigens in the nasal mucosa of mild COVID-19 patients may lead to inflammatory rhinopathy and prolonged or relapsing anosmia. This study sheds light on the potential mechanisms underlying persistent symptoms of COVID-19 and highlights the importance of monitoring patients with persistent anosmia and nasal-related symptoms.

Multicomponent Reactions Applied to Total Synthesis of Biologically Active Molecules: A Short Review.

Multicomponent reactions (MCRs) are processes in which three or more starting materials are combined in the same reaction vessel, forming an adduct that contains all or most of the atoms of the starting materials. MCRs are one-pot processes that provide attractive advantages for the total synthesis of target molecules. These reactions allow rapid access to structurally complex adducts from particularly simple starting materials. Moreover, MCRs are generally intrinsically associated with principles of green syntheses, such as atom economy, minimization of isolation, and purification of synthetic intermediates, leading to large solvent economies and avoiding the production of large amounts of reaction waste. Thus, synthetic routes employing multicomponent reactions are generally more convergent, economical and often allow higher overall yields. In total synthesis, the use of MCRs has been mainly applied in the preparation of key advanced intermediates. Progress in the use of MCRs in total synthesis has been described over the last decades, including not only classical MCRs reactions (e.g. isocyanide-based transformations), but also non-traditional multicomponent reactions. Furthermore, reports concerning stereoselective multicomponent transformations are still scarce and present further development opportunities. This review aims to provide a general overview of the application of MCRs as key steps in the rapid preparation of structurally complex derivatives and fine chemicals. In special, some selected examples have been successfully applied for medicinal purposes. Finally, in some representative cases, either key intermediates formed during the reaction vessel or corresponding transition states have been disclosed in order to provide insights into the reaction mechanisms.

Use of histone methyltransferase inhibitors in cancer treatment: A systematic review.

Histone modifications are an epigenetic mechanism, and the dysregulation of these proteins is known to be associated with the initiation and progression of cancer. In the search for the development of new and more effective drugs, histone modifications were identified as possible therapeutic targets. Histone methyltransferase (HMT) inhibitors correspond to the third generation of epigenetic drugs capable of writing or deleting epigenetic information. This systematic review summarized the development and prospect for the use of different HMT inhibitors in cancer therapy. An electronic search was applied across CENTRAL, Clinical Trials, Embase, LILACS, LIVIVO, Open Gray, PubMed, Scopus, and Web of Science. Based on the title and abstracts, two authors independently selected eligible studies. After the complete reading of the articles, based on the eligibility criteria, 11 studies were included in the review. Different inhibitors of HMT have been explored in multiple clinical studies, and have shown considerable anti-tumor effects. However, few phase 2 studies have been completed and/or have available results. The most advanced clinical trials mainly include tazemetostat, an Enhancer of zeste homolog 2 (EZH2) inhibitor approved for follicular lymphoma (FL). The use of HMT inhibitors has presented, so far, concise results in the treatment of hematological cancers, moreover, the adverse effects presented after the use of these medicines (alone or in combination) did not show a high level of risk for the patient. These findings, in addition to ongoing clinical studies, can represent a promising future regarding the use of HMT inhibitors in treating different types of cancer.

3D printed matrix solid forms: Can the drug solubility and dose customisation affect their controlled release behaviour?

The use of 3D printing in pharmaceutics has grown over the last years, along with the number of studies on the impact of the composition of these formulations on their pharmaceutical and biopharmaceutical properties. Recently, we reported the combined effect of the infill percentage and the presence of a pore former on the drug release behaviour of 3D printed matrix solid forms prepared by fused deposition modelling. However, there are some open questions about the effect of the drug solubility and the size of these dosage forms on their controlled release properties. Therefore, we produced poly(Ɛ-caprolactone) filaments containing different soluble forms of dexamethasone (free acid, DEX; acetate ester, DEX-A; and phosphate salt, DEX-P), which showed suitable mechanical properties and printability. 3D printed solid forms were produced in two different sizes. The formulations composed of DEX-P released about 50% of drug after 10 h, while those containing DEX or DEX-A released about 9%. The drug release profiles from the 3D printed forms containing the same drug form but with different sizes were almost completely overlapped. Therefore, these 3D printed matrix solid forms can have their drug content customised by adjusting their size, without changing their controlled release behaviour.

Dental education profile in COVID-19 pandemic: A scoping review.

INTRODUCTION: This scoping review aimed to determine the frequency of different teaching methodologies, tools and platforms applied in dental education during the COVID-19 pandemic. MATERIALS AND METHODS: The search strategy was performed in six databases and grey literature. A total of 28 questionnaire-based studies were included, without language or time restriction, from 20 different countries. RESULTS: Six thousand five hundred sixty-five participants were assessed: 84% undergraduates, 9% of faculty members, 5% of postgraduate students/residents/trainees and 2% of dental schools/residency programs. The pooled eligible data for teaching methodologies were 62% of a combination of different methods (95% CI, 35.5% to 82.3%), 23% a combination of synchronous and asynchronous formats (95% CI, 8.2% to 50.2%) and 15% for only synchronous lectures (95% CI, 4.3% to 42.2%). The reported tools were laptops (40%), smartphones (40%), tablets (40%), desktops (20%), Blackboard (20%), Respondus Lockdown Browser (20%), eProctor (20%) and PowerPoint (20%). The most used platforms were Zoom (70.6%), Microsoft Teams (23.5%) and Cisco Webex (23.5%). A better time management (17.9%; 95% CI, 7.9% to 35.6%) and the possibility of revision with additional notes (14.3%; 95% CI, 5.7% to 31.5%) was the greatest advantages related to dental e-learning, while the increased levels of anxiety/stress/burnout/exhaustion (35.7%; 95% CI, 21% to 54.2%) and internet connection problems (35.7%; 95% CI, 21% to 54.2%) was the most cited disadvantages. CONCLUSION: This scoping review showed promising blended teaching methodologies, tools and platforms in the dental education profile. The evidence suggests that e-learning technologies can widely contribute to dental education during the COVID-19 pandemic. Therefore, this study makes a major contribution to research by assessing the impact of COVID restrictions on dental education and further studies are needed to identify how restrictions in dental practice will affect future professionals.

No molecular evidence for influenza A virus and coronavirus in bats belonging to the families Phyllostomidae, Vespertilionidae, and Molossidae in the state of São Paulo, Brazil.

This study aimed to evaluate, by molecular methods, the presence of influenza A virus (IAV) and coronavirus in non-hematophagous bats collected in the state of São Paulo, Brazil. Samples of lung tissue and small intestine from 105 bats belonging to three families (Phyllostomidae, Vespertilionidae, and Molossidae) were collected in 22 municipalities in the state of São Paulo. Genetic identification of bats species was performed by amplification and sequencing of a fragment of 710 bp of the mitochondrial COI gene. In the detection of IAV, genomes were performed by RT-PCR, aiming at the amplification of a 245-bp fragment of the IAV matrix (M) protein gene. For coronaviruses, two fragments of 602 and 440 bp corresponding to segments along the gene encoding the RNA-dependent RNA polymerase (RdRp) were targeted. The detection limit for each of the PCRs was also determined. All samples analyzed here were negative for both viruses, and the lower limit of detection of the PCRs for the amplification of influenza virus A and coronavirus was estimated at 3.5 × 103 and 4.59 genomic copies per microliter, respectively. Although bats have been shown to harbor a large number of pathogens, the results of the present study support the theory that virus circulation in bats in the wild often occurs at low viral loads and that our understanding of the complex infectious dynamics of these viruses in wild conditions is still limited.