Nanoparticles and Vaccine Development.

In spite of the progress of conventional vaccines, improvements are required due to concerns about the low immunogenicity of the toxicity, instability, and the need for multiple administrations of the vaccines. To overcome the mentioned problems, nanotechnology has recently been incorporated into vaccine development. Nanotechnology increasingly plays an important role in vaccine development nanocarrier-based delivery systems that offer an opportunity to increase the cellular and humoral immune responses. The use of nanoparticles in vaccine formulations allows not only enhanced immunogenicity and stability of antigen, but also targeted delivery and slow release. Over the past decade, nanoscale size materials such as virus-like particles, liposomes, ISCOMs, polymeric, inorganic nanoparticles and emulsions have gained attention as potential delivery vehicles for vaccine antigens, which can both stabilize vaccine antigens and act as adjuvants. This advantage is attributable to the nanoscale particle size, which facilitates uptake by Antigen- Presenting Cells (APCs), then leading to efficient antigen recognition and presentation. Modifying the surfaces of nanoparticles with different targeting moieties permits the delivery of antigens to specific receptors on the cell surface, thereby stimulating selective and specific immune responses. This review provides an overview of recent advances in nanovaccinology.

Hemodynamic Changes in Experimentally Envenomed Anaesthetized Rats by Intravenous Injection of Hemiscorpius lepturus Venom.

BACKGROUND: We investigated the hemodynamic changes (Inotropic, chronotropic and arrhythmogenic) in intravenously envenomed anesthetized rats with Hemiscorpius lepturus venom. The neutralizing potencies of different drugs and commercial antivenom were assessed simultaneously. METHODS: Different doses of the crude venom (100, 200 and 400µg/rat) were injected during five minutes via the femoral vein and cardiovascular changes were recorded in rats in Razi Institute Corporation, Karaj, Iran in 2017. The drugs (Atropine, lidocaine, propranolol and prazosin) were injected before the venom for determination of the counteracting effects. Different volumes (100, 500 and 1000µl) of the antivenom were pre envenomed to neutralize cardiovascular changes. RESULTS: Temporary hypertension and bradycardia with no arrhythmogenic effects were depicted within twenty minutes. There was a difference in arterial pressure between the venom (400µg/rat) and the vehicle at 8 minutes (114.68±5.1mmHg versus 70.2±4.3mmHg). Elevation of the mean arterial pressure was inhibited by propranolol (2 mg/kg) and neutralized by prazosin (1mg/kg) while lidocaine (4mg/kg) and atropine (1mg/kg) had no effects. Premedication with Iranian commercial antivenom (1000µl) produced surprisingly temporary hypertension compared to the vehicle (140.84±4.5 versus 84.3±3.2). It had no neutralizing properties on blood pressure variation before the venom injection. Volume-expanded hypertension phenomenon was ruled out in a parallel study. CONCLUSION: This venom has vasoconstrictive effects in rats probably due to the presence of norepinephrine like materials in its content or liberated from adrenal gland inhibited by prazosin premedication. The neutralizing effects of antivenom on venom-induced hypertension are questionable.

Development and physicochemical, toxicity and immunogenicity assessments of recombinant hepatitis B surface antigen (rHBsAg) entrapped in chitosan and mannosylated chitosan nanoparticles: as a novel vaccine delivery system and adjuvant.

In this study chitosan nanoparticles (CS NPs) and mannosylated chitosan nanoparticles (MCH NPs) loaded with recombinant hepatitis B surface antigen (rHBsAg) was synthesized as a vaccine delivery system and assessed toxically and immunologically. The physicochemical properties of the nanoparticles (NPs) were determined by methods including scanning electron microscope (SEM) and dynamic light scattering (DLS). The morphology of the NPs was semi spherical and the average diameter of the loaded CS and MCH NPs was found to be 189 and 239 nm, respectively. The release studies showed that after the initial burst, both of the loaded NPs provided a continuous and slow release of the antigens. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay showed concentration and time dependent toxicity profile for both formulations, but rHBsAg loaded CS nanoparticle showed higher toxicity due to smaller particle size and larger zeta potential. Abnormal toxicity test (ATT) results showed no signs of toxicity in mice and guinea-pigs treated with loaded MCHNPs. Stability test for six months showed acceptable changes in size, surface charge, and antigenicity for loaded MCH nanoparticles. Finally, in vivo immunogenicity study revealed greater adjuvant capability of MCH nanoparticles than others formulations. Our results showed MCH NPs can be used as a controlled and targeted vaccine delivery system.

A New Vaccine Delivery Vehicle and Adjuvant Candidate: Bordetella pertussis Inactivated Whole Cells Entrapped in Alginate Microspheres.

There is no doubt about the whole cell pertussis vaccine efficacy, but it is necessary to improve the vaccine quality specially to decrease its toxicity by obtaining good immunogenicity with low bacterial content. In this work, under optimum condition inactivated B. pertussis bacteria cells entrapped with alginate microparticles were fabricated and in vivo immunogenicity and ptency of new microparticle based vaccine were evaluated in mice. Microspheres loaded with inactive B. pertussis bacterium cells were prepared via an emulsification method and analyzed for morphology, size, polydispersity index, loading efficiency, loading capacity, release profile and in vivo potency. The inactivated bacterial suspension mixture prepared in this work was nontoxic and showed potent ED50 (1:333 of human dose) and preserved agglutinins 1, 2, 3. The optimum conditions for the preparation of microparticles were achieved at alginate concentration 3.8% (w/v), CaCl2 8% (w/v), PLL 0.1% (w/v), lipophilic surfactant 0.22 (%w/v), hydrophilic surfactant 3.6 (%w/v), cross linking time 3min, homogenization rate 600 rpm, and alginate to CaCl2 solution ratio 4. Both empty and B. pertussis loaded microparticles exhibited smooth surface texture and relatively spherical shape. The B. pertussis encapsulated microspheres fabricated under optimized conditions showed mean particle size 151.1 µm, polydispersity index 0.43, loading efficiency 89.6%, loading capacity 36.3%, and relatively constant release rate lasted to 15 days. In vivo immunogenicity and protection study against wild type challenge showed strongly higher potency (approximately 2.5 fold) of encapsulated B. pertussis organisms than non-encapsulated conventional aluminum hydroxide adsorbed vaccine. It can be concluded that microencapsulation of inactive B. pertussis cells appears to be a suitable approach for improving the wP vaccine quality, specially by obtaining good immunogenicity with low bacterial content.

Enteric trimethyl chitosan nanoparticles containing hepatitis B surface antigen for oral delivery.

Oral vaccination is the preferred route of immunization. However, the degradative condition of the gastrointestinal tract and the higher molecular size of peptides pose major challenges in developing an effective oral vaccination system. One of the most excellent methods used in the development of oral vaccine delivery system relies on the entrapment of the antigen in polymeric nanoparticles. In this work, trimethyl chitosan (TMC) nanoparticles were fabricated using ionic gelation teqnique by interaction hydroxypropyl methylcellulose phthalate (HPMCP), a pH-sensitive polymer, with TMC and the utility of the particles in the oral delivery of hepatitis B surface antigen (HBsAg) was evaluated employing solutions that simulated gastric and intestinal conditions. The particle size, morphology, zeta potential, loading capacity, loading efficiency, in vitro release behavior, structure, and morphology of nanoparticles were evaluated, and the activity of the loaded antigen was assessed. Size of the optimized TMC/HPMCP nanoparticles and that of the antigen-loaded nanoparticles were 85 nm and 158 nm, respectively. Optimum loading capacity (76.75%) and loading efficiency (86.29%) were achieved at 300 µg/mL concentration of the antigen. SEM images revealed a spherical shape as well as a smooth and near-homogenous surface of nanoparticles. Results of the in vitro release studies showed that formulation with HPMCP improved the acid stability of the TMC nanoparticles as well as their capability to preserve the loaded HBsAg from gastric destruction. The antigen showed good activity both before and after loading. The results suggest that TMC/HPMCP nanoparticles could be used in the oral delivery of HBsAg vaccine.

Study on development of Vipera lebetina snake anti-venom in chicken egg yolk for passive immunization.

Chicken egg yolk antibodies against Vipera lebetina venom were evaluated for their antivenom potential. White leghorn hens were immunized with detoxified V. lebetina venom (γ-irradiated venom). The detoxified venom (200 µg) was mixed with an equal volume of complete Freund's adjuvant and was injected intramuscularly into the hens. The antibodies showed high activity (1.6 LD50/mL) in egg yolks after 12 d of venom injection. The eggs were collected after 12 days, and the egg yolks were removed and washed with purified water to remove any contamination with egg whites. The purification was performed using a method described by Maya Devi et al., followed by gel filtration (Sephadex G-50). The purity and molecular weight of antivenom antibodies (IgY) were determined using electrophoresis, and the molecular weight was found to be approximately 185 kDa. The potency of IgY was 6 LD50/mL (mice), i.e., 1 mL of IgY could neutralize 43.8 µg of standard V. lebetina venom). Our results showed that chicken egg yolk antibodies were effective in neutralizing the lethality and several pharmacological effects of V. lebetina venom and could be used for developing effective antivenom.

Study on camel IgG purification: a new approach to prepare Naja Naja Oxiana antivenom as passive immunization for therapy.

A combined process of ammonium sulfate precipitation (salting out) and ion-exchange chromatography on DEAE-Sepharose CL-6B was used to prepare camel antivenom (IgG) against Naja Naja Oxiana for therapy. In the ammonium sulfate precipitation, the best condition for fractionation of IgG from the other proteins in camel serum was 55% precipitate. The camel IgG presented as 2 bands with molecular masses of 250 and 100 kDa, the latter corresponding to heavy chain IgG, on 10% gel electrophoresis. A trace amount of non-IgG proteins was not isolated and remained in this precipitate. Therefore in order to effectively separate albumin and the other nonspecific proteins from the IgG, the 25% precipitate of ammonium sulfate precipitation of serum was subjected to DEAE-Sepharose CL-6B column chromatography. A peak of antibody (IgG) could be obtained by elution with sodium phosphate buffer. In this stage, 2 bands of molecular masses of 150 and 75 kDa were observed on 7% gel electrophoresis. A comparative study was performed between camel IgG and conventional horse F(ab) 2 antivenoms in term of potency (serum neutralization test and ELISA). Our results showed that the potency of camel antivenom was 4-fold higher than that of horse. It is suggested the combined ammonium sulfate precipitation and ion-exchange chromatography process effectively removed residual proteins in the final camel IgG preparation and can be a suitable method for large-scale refinement of therapeutic camel antivenoms.