Optimization and characterization of a novel tea tree oil-integrated poly (ε-caprolactone)/soy protein isolate electrospun mat as a wound care system.

A set of poly (ε-caprolactone)/soy protein isolate (PCL/SPI) mats with different ratios of PCL to SPI was fabricated using the electrospinning method. The mat with PCL to SPI ratio of 95:5 (PS 95:5) had the narrowest nanofibers, the highest percentage of porosity, the lowest swelling ratio, the least vapor transmission, and the slowest degradation rate among the prepared mats. The hemolysis assay indicated that all mats can be considered biocompatible biomaterials. In continue, three different weight ratios of tea tree oil (TTO) were loaded into the PS 95:5 mat. The release profiles illustrated that higher amounts of TTO could be released in an acidic environment. The antioxidant activity of the mats increased by the increase in their TTO content. The cell viability test, cell adhesion images, and live/dead assay of TTO-loaded mats affirmed that all fabricated mats were biocompatible. The scratch wound assay expressed that TTO accelerates the rate of wound closure. The TTO-loaded mats illustrated antibacterial activity against both Escherichia coli and Staphylococcus aureus bacteria. The obtained outcomes revealed that TTO-loaded PCL/SPI mats can be considered promising potential wound dressings.

ZIF-8 enriched electrospun ethyl cellulose/polyvinylpyrrolidone scaffolds: The key role of polyvinylpyrrolidone molecular weight.

A set of zeolitic imidazolate framework-8 (ZIF-8) incorporated ethyl cellulose/polyvinylpyrrolidone scaffolds was prepared by electrospinning method. The impact of polyvinylpyrrolidone molecular weight on characteristics of prepared scaffolds was investigated. The ethyl cellulose/polyvinylpyrrolidone scaffold made of polyvinylpyrrolidone 17,000 showed the narrowest nanofibers (mean diameter = 140 nm), the highest percentages of porosity (62%) and swelling (>130%), the most hydrophilic surface (water contact angle = 74°), the fastest rate of degradation, and the best elongation at break (6.3%) among the samples. Furthermore, the higher capability of this scaffold for cell proliferation was revealed through MTT test (125% after 5 days of culture), Live/Dead assay, and FESEM images of cell attachment. This scaffold also represented the highest released amount of ZIF-8-induced Zn2+ ions (20 ppm after 84 h) leading to its greatest antibacterial activity. These findings indicated that the ZIF-8 incorporated ethyl cellulose/polyvinylpyrrolidone scaffold can be used in future skin tissue-engineered constructs.

Effect of glutaraldehyde and calcium chloride as different crosslinking agents on the characteristics of chitosan/cellulose nanocrystals scaffold.

The effect of glutaraldehyde and calcium cations as covalent and ionic crosslinkers was investigated on the main characteristics of scaffolds based on chitosan and cellulose nanocrystals. Therefore, four different scaffolds based on chitosan/cellulose nanocrystals with different crosslinking methods were fabricated using the freeze-drying method for potential use in bone tissue engineering. The structural and chemical features of prepared scaffolds were studied by the FTIR technique. FESEM images revealed that all scaffold samples are porous three-dimensional networks in which the pores are connected. TGA analysis showed that the thermal stability of scaffolds based on chitosan/cellulose nanocrystals has not been changed significantly by using different crosslinking methods. The chitosan/cellulose nanocrystals scaffold crosslinked by glutaraldehyde represented the highest compressive strength and the uncrosslinked scaffold showed the highest swelling ratio in comparison to the other scaffolds. The fastest degradation rate belonged to the scaffold crosslinked by calcium cations. FESEM images and EDX analysis confirmed that fabricated scaffolds have good biomineralization ability. The cell viability and cell attachment results indicated that all four scaffolds support cell proliferation and cell adhesion. However, the viability of NIH3T3 fibroblast cells in the presence of glutaraldehyde-containing scaffolds was lower than that of other scaffolds.

Development of a novel reinforced scaffold based on chitosan/cellulose nanocrystals/halloysite nanotubes for curcumin delivery.

Chitosan, cellulose nanocrystals, and halloysite nanotubes in the presence of calcium cations were used to fabricate a three-dimensional nanocomposite scaffold. The FTIR and XRD analyses revealed that formation of the network and incorporation of halloysite nanotubes into it were successful. FESEM images showed that the addition of higher amounts of halloysite nanotubes into the scaffold's matrix leads to more and smaller pores. The addition of halloysite nanotubes enhanced the thermal stability, mechanical characteristics, water uptake, and degradation rate of the nanocomposite scaffold. The nanocomposite scaffold represented good biomineralization, great cell proliferation, and acceptable cell attachment. Furthermore, the capability of the nanocomposite scaffold for curcumin delivery was approved through cell proliferation, cumulative release, and antibacterial studies. Cell proliferation of the nanocomposite with 10 wt% curcumin-loaded halloysite nanotubes reached around 175% after 72 h. Considering the results, the prepared nanocomposite scaffold holds great potential for being used in bone tissue engineering applications.

Starch-based semi-IPN hydrogel nanocomposite integrated with clinoptilolite: Preparation and swelling kinetic study.

Semi-interpenetrating polymer network (semi-IPN) of starch-graft-poly(acrylic acid-co-acrylamide)/polyvinyl alcohol/clinoptilolite (starch-g-p(AA-co-AAm)/PVA/clino) superabsorbent nanocomposite was synthesized by free-radical graft co-polymerization technique in an aqueous solution. Taguchi method was used to optimize the synthesis reaction condition based on the equilibrium swelling capacity of the hydrogels. FTIR, XRD, and SEM analyses were used to study the chemical and structural properties of the hydrogel samples. The equilibrium swelling capacity of the semi-IPN superabsorbent nanocomposite (364.82 g/g) was higher than that of neat hydrogel (286.21 g/g) and in both of them water penetration into hydrogel network occurred through non-Fickian diffusion mechanism. Incorporation of clino into the polymeric matrix not only increased the equilibrium swelling capacity of the hydrogel, but also induced a substantial enhancement in its mechanical strength. Semi-IPN superabsorbent nanocomposite showed reasonable water absorbency under different loads, good salt and pH-sensitive swelling behavior, and better water retention capability, which make it potentially useful for hygiene products.

Semi-IPN superabsorbent nanocomposite based on sodium alginate and montmorillonite: Reaction parameters and swelling characteristics.

Semi-interpenetrating polymer network (semi-IPN) superabsorbent nanocomposite based on montmorillonite (MMT) and sodium alginate (NaAlg)-g-poly(acrylic acid(AA))/polyvinylpyrrolidone (PVP) was synthesized. Chemical structure and surface morphology of the hydrogels were characterized by FTIR, XRD, thermogravimetric analysis (TGA), SEM, and TEM techniques. FTIR results revealed that graft polymerization, PVP interpenetration through hydrogel network, and nanocomposite formation have occurred. The coarse surface of the hydrogels was changed into interlinked porous structures in the presence of MMT. The effect of polymerization variables on water absorbency of the hydrogels was assessed and optimized. Semi-IPN superabsorbent nanocomposite presented higher equilibrium swelling capacity (618.92 g/g) compared with neat hydrogel (521.17 g/g). Swelling behavior of the hydrogels strongly depended on pH values of the solution as well as the type and concentration of saline solution. Semi-IPN superabsorbent nanocomposite possessed good reswelling capability, making it as an efficient water reservoir to supply required water to plants in agricultural applications.