Novel treatment approach of localized juvenile spongiotic gingival hyperplasia with use of Nd:YAG laser.

INTRODUCTION: This article describes the management of two patients who presented with localized juvenile spongiotic gingival hyperplasia. This disease entity is poorly understood, and literature regarding successful treatment is scant. However, there are common themes to management including proper diagnosis and treatment via removal of the affected tissue. The biopsy demonstrates intercellular edema and neutrophil infiltrate with epithelial and connective tissue disease components, so surgical deepithelialization may not be adequate to definitively treat the disease. METHODS AND RESULTS: This article presents two cases of the disease and suggests the use of the Nd:YAG laser as an alternative management modality. CONCLUSION: To our knowledge, we present the first cases of localized juvenile spongiotic gingival hyperplasia treated with the Nd:YAG laser. KEY POINTS: Why are these cases new information? To our knowledge, this case series illustrates the first use of an Nd:YAG laser to treat the rare pathology localized juvenile spongiotic gingival hyperplasia. What are the keys to successful management of these cases? To properly manage this rare presentation, proper diagnosis is paramount. Following diagnosis with microscopic evaluation, deepithelialization and treatment of underlying connective tissue infiltrate via the Nd:YAG laser offers an elegant option to treat the pathology and maintain esthetic outcomes. What are the primary limitations to success in these cases? The primary limitations of these cases include the small sample size, which is attributable to the rarity of the disease.

Considerations for using a removable prosthesis with attachments for a staged approach to a failing implant reconstruction.

Full-arch implant reconstructions are being utilized in clinical practice today. Very often these prostheses are prosthetically driven, but not periodontally maintainable. Often the patient presents to the general practitioner with a failing implant reconstruction, where several fixtures need to be removed and others are maintainable. The article presents a case report where a removable prosthesis is used as a transitional appliance during the retreatment of the case. A removable complete overdenture prosthesis using attachments was used to establish proper occlusion and function, prevent loading on the guided bone regeneration sites, and to assist in fabrication of a stable guide for implant placement. The staged approach facilitated laser periodontal therapy on the remaining fixtures, and allowed proper oral hygiene instruction and assessment of the patient's ability to clean the remaining fixtures properly. Although the potential to treat this case with transitional implants or immediate load fixtures was discussed, the risk versus benefit scenario favored a removable prosthesis with attachments. Success required proper communication between the surgeon, restorative dental practitioner, laboratory, and patient. (Quintessence Int 2023;54:126-132; doi: 10.3290/j.qi.b3648969).

Laser-Assisted Therapy for the Treatment of Peri-implantitis. Part I. Clinical Outcomes.

The purpose of this 12-month randomized, controlled clinical trial was to evaluate the efficacy of a monotherapy protocol with the neodymium-doped yttrium aluminum garnet (Nd:YAG) laser for treatment of peri-implantitis. Twenty patients with 36 implants exhibiting probing pocket depths (PPDs) > 4 mm and evidence of radiographic bone loss (RBL) were randomly divided into two groups. The test group was treated with the Nd:YAG laser, and the control group was managed with mechanical debridement only. Peri-implant clinical parameters were recorded at baseline and at 12 months after treatment. PPD, RBL, and bleeding on probing showed improvements after 12 months in the test and control groups. The laser therapy provided additional benefits of greater reduction in PPDs and increased bone level with no adverse outcomes. The results demonstrated that laser therapy could be a valuable modality for the treatment of peri-implantitis.

Effectiveness of Adjunctive Use of Low-Level Laser Therapy and Photodynamic Therapy After Scaling and Root Planing in Patients with Chronic Periodontitis.

The aim of this split-mouth, randomized controlled clinical trial was to evaluate the efficacy of low-level laser therapy (LLLT) and photodynamic therapy (PDT) as an adjunct to scaling and root planing (SRP) in treatment of chronic periodontitis. Each quadrant was categorized into control group (SRP alone; two quadrants per patient), test group 1 (SRP + PDT), and test group 2 (SRP + LLLT. The test groups showed significantly higher reductions in Gingival Index, probing depth, and clinical attachment level as well as reductions in Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans counts at 1-, 3-, 6-, and 9-month follow-ups when compared with the control group.

Novel Approach to Overcome Limitations Associated With Immediate Implant Placement: Osteotome Technique.

This case series introduces a novel osteotome technique as an alternative to conventional drilling protocols for immediate fixtures. Immediate implant placement is associated with significantly less bone-to-implant contact, and navigating the anatomy of the socket can be difficult. Osteotomy drills remove already-limited bone following atraumatic extractions. The osteotome technique has been introduced as an alternative approach to prepare the osteotomy in the appropriate position relative to the socket apex and surrounding alveolar walls. The surgical technique and case reports demonstrating it are presented, highlighting the technique's benefits.

Amniotic Band Syndrome: A Multidisciplinary Care Approach to the Treatment of a Rare Case.

Amniotic band syndrome (ABS) is a rare developmental disorder associated with defects such as syndactyly, facial and/or palatal clefts, and dental anomalies like malformed or impacted teeth. In this report, a patient with ABS was successfully treated with orthodontic, endodontic, and periodontal therapies. Cone beam computed tomography revealed a unique eruptive path of the impacted central incisor through the incisive canal and cleft area. The tooth was occlusally and functionally stable after 1 year of treatment. Multidisciplinary care was critical to the success of this case. Available literature on ABS is also briefly reviewed.

Lip Repositioning with Vestibular Shallowing Technique for Treatment of Excessive Gingival Display with Various Etiologies.

Improvement of smile esthetics is a major goal of modern dentistry. Various treatment modalities have been proposed to correct excessive gingival display (EGD), depending on the identified etiologies. This study reports on the clinical and patient-centered outcomes of a novel lip repositioning technique with vestibular shallowing approach in the treatment of three types of EGD with varying etiologies. Periosteal fenestration with cicatrization (scarification) was performed at the mucogingival junction to ensure the stability of esthetic outcomes. Suspensory triangular sutures and extraoral tissue stabilization tapes were used to facilitate the cicatrization process during the healing phase of this novel technique. Postoperative clinical examination revealed 84% reduction in gingival display that remained stable for 13 to 16 months with a high level of patient satisfaction.

Comparison of Osteotome and Conventional Drilling Techniques for Primary Implant Stability: An In Vitro Study.

It may be difficult to achieve primary stability in the posterior maxilla because of poor quality and quantity of bone. Studies have shown that the osteotome technique immediately increases bone density thereby increasing primary stability. An in vitro study was conducted to compare the stability achieved by the osteotome and conventional drilling techniques in low density bone. Forty endosseous implant fixtures (n = 40) were inserted in a solid rigid polyurethane block simulating low density (D3) bone. The implants were divided into 4 groups to test 2 variables: (1) implant length (10 mm or 13 mm) and (2) preparation of osteotomy (conventional drilling or osteotome technique). Insertion torque (IT) and resonance frequency analysis (RFA) were measured for each implant. Statistical analysis using one-way ANOVA and Tukey post hoc test was done to study IT and RFA data of the 4 groups. Pearson Correlation test was used to determine the correlation between IT and RFA values of the implants. The IT and RFA values were statistically significant higher using the osteotome technique as compared to conventional drilling (P < 0.0001). Statistically significant higher values were also found for IT and RFA of 13 mm implants as compared to 10 mm implants. A significant correlation was found between insertion torque and RFA values in all 4 groups (r = 0.86, P < 0.0001). The conclusion was that the osteotome technique significantly increased primary stability.

Resonance frequency analysis (RFA) and insertional torque (IT) stability comparisons of implants placed using osteotomes versus drilling techniques: A preliminary case study.

OBJECTIVE: Poor bone density in the posterior maxilla often presents challenges in achieving implant stability. Insertional torque (IT) and resonance frequency analysis (RFA) have been used to objectively monitor the process of osseointegration. This study was designed to quantitatively assess the primary and secondary stability of fixtures placed using the osteotome or conventional drilling technique, in soft bone. The study also assessed if there was a correlation between IT and RFA measurements. METHOD AND MATERIALS: Sixteen implants of a standardized dimension were randomly assigned to two groups: osteotome or conventional drilling. IT was taken at the time of placement. RFA was recorded at baseline and 30, 60, and 90 days. RESULTS: Average IT and RFA were 36 Ncm (range 25-45 Ncm) and 61.5 implant stability quotient (ISQ; range 44-72 ISQ), respectively. RFA in the osteotome group increased from day 0 to day 30 (63.5 to 68.0 ISQ) whereas it decreased in the conventional drilling group (65.9 to 56.6 ISQ). At 90 days, both groups showed similar results. No statistically significant difference between IT and RFA was found across all time intervals. CONCLUSION: IT and ISQ values were shown to fluctuate depending on various local anatomical factors such as density of the bone. Additional clinical and radiographic studies are needed in type 1 to 4 bone to determine the utilization of RFA and IT for routine implant surgery. Adequate stability measurements are critical for implant placement. Future guidelines and knowledge of stability and bone density values may help in establishing loading protocols and improving success rate.

Novel Techniques with the Aid of a Staged CBCT Guided Surgical Protocol.

The case report will present some novel techniques for using a "staged" protocol utilizing strategic periodontally involved teeth as transitional abutments in combination with CBCT guided implant surgery. Staging the case prevented premature loading of the grafted sites during the healing phase. A CBCT following a tenting screw guided bone regeneration procedure ensured adequate bone to place an implant fixture. Proper assessment of the CBCT allowed the surgeon to do an osteotome internal sinus lift in an optimum location. The depth of the bone needed for the osteotome sinus floor elevation was planned. The staged appliance allowed these sinus-augmented sites to heal for an extended period of time compared to implants, which were uncovered and loaded at an earlier time frame. The staged protocol and CBCT analysis enabled the immediate implants to be placed in proper alignment to the adjacent fixture. After teeth were extracted, the osseointegrated implants were converted to abutments for the transitional appliance. Finally, the staged protocol allowed for soft tissue enhancement in the implant and pontic areas prior to final insertion of the prosthesis.

Reconstruction of the narrow ridge using combined ridge split and guided bone regeneration with rhPDGF-BB growth factor-enhanced allograft.

In clinical situations where the presence of severe horizontal ridge deficiencies precludes simultaneous implant placement and bone augmentation, a staged approach may be desirable to allow optimal implant placement. Numerous therapeutic options are available for the treatment of the horizontally deficient ridge. With advances in tissue engineering, the use of growth factors can significantly improve wound healing with more rapid bone formation and maturation. These case reports demonstrate a technique that enhances the predictability of horizontal bone gain with reduced surgical trauma and postoperative complications. Recombinant human platelet-derived growth factor BB (rhPDGF-BB) in combination with particulate allograft is used to stimulate the proliferation and migration of osteogenic cells. A ridge split technique with vertical bone incisions allows expansion and mobilization of the buccal plate, creating a space that will contain the particulate graft material. Decortication of the mobilized buccal plate will create pathways to allow cellular and vascular access for enhanced maturation. Additional graft material is placed lateral to the mobilized buccal plate to increase apical ridge width. The use of piezoelectric surgery enables a precise crestal bony incision in severely deficient ridge widths and aids in faster wound healing. This study discusses the technique and the recommended therapeutic considerations to ensure predictable regeneration of adequate bone for optimal implant placement in horizontally deficient ridges.

Maintaining space in localized ridge augmentation using guided bone regeneration with tenting screw technology.

Prosthetic guided implant surgery requires adequate ridge dimensions for proper implant placement. Various surgical procedures can be used to augment deficient alveolar ridges. Studies have examined new bone formation on deficient ridges, utilizing numerous surgical techniques and biomaterials. The goal is to develop time efficient techniques, which have low morbidity. A crucial factor for successful bone grafting procedures is space maintenance. The article discusses space maintenance tenting screws, used in conjunction with bone allografts and resorbable barrier membranes, to ensure uneventful guided bone regeneration (GBR) enabling optimal implant positioning. The technique utilized has been described in the literature to treat severely resorbed alveolar ridges and additionally can be considered in restoring the vertical and horizontal component of deficient extraction sites. Three cases are presented to illustrate the utilization and effectiveness of tenting screw technology in the treatment of atrophic extraction sockets and for deficient ridges.

Novel decision tree algorithms for the treatment planning of compromised teeth.

In clinical practice, dentists are faced with the dilemma of whether to treat, maintain, or extract a tooth. Of primary importance are the patient's desires and the restorability and periodontal condition of the tooth/teeth in question. Too often, clinicians extract teeth when endodontic therapy, crown-lengthening surgery, forced orthodontic eruption, or regenerative therapy can be used with predictable results. In addition, many clinicians do not consider the use of questionable teeth as provisional or transitional abutments. The aim of this article is to present a novel decision tree approach that will address the clinical deductive reasoning, based on the scientific literature and exemplified by selective case presentations, that may help clinicians make the right decision. Innovative decision tree algorithms will be proposed that consider endodontic, restorative, and periodontal assessments to improve and possibly eliminate erroneous decision making. Decision-based algorithms are dynamic and must be continually updated in accordance with new evidence-based studies.

Considerations for a staged approach in implant dentistry.

Full-arch and partial reconstruction is demanding for the clinician and a challenge for the patient. Traditionally, teeth are extracted, and implants are placed; the patient wears a provisional removable prosthesis during implant osseointegration. The patient is left to deal with a difficult transition from a fixed dentition to a removable one, albeit temporarily. This drastic alteration can generate functional, emotional, and esthetic changes for the patient, thereby making a difficult time even more challenging. Reconstructing the dentition through a staged approach has been documented and involves strategic extractions along with the placement of several implants, but leaves select abutment teeth for a fixed provisional prosthesis. This allows for the provisional prosthesis to be tooth-supported during implant integration and later converted to an implant-supported prosthesis. In this manner, the patient will benefit from a fixed provisional prosthesis throughout the treatment process. A staged approach is contingent upon a thorough periodontal and prosthetic evaluation and work-up. Success requires proper communication between the periodontist, surgeon, restorative dentist, laboratory, and patient. A team approach is necessary for success. The protocol, advantages, and disadvantages for a staged approach to a full-arch implant-supported reconstruction are discussed. The authors also present a case to show how the staged approach can be used for sextant or quadrant rehabilitation.

Sequencing osteotomes to overcome challenges presented by deficient bone quantity and quality in potential implant sites.

The combination of inadequate bone volume, poor bone quality, and elevated occlusal forces contributes to the posterior maxilla being the least predictable site for implant survival. Osteotomes are surgical instruments that have been designed in an attempt to improve bone quantity and quality. Conflicting reports in the literature compare the percentages of bone-to-implant surface contact between the implants placed using osteotomes and conventional drills. However, some studies use different osteotomes that may be harmful to the bone. Innovative pilot intermediary osteotomes used in conjunction with divergent sequential osteotomes to ensure parallelism, expand narrow ridges predictably, safely and significantly internally elevate the sinus, aid in future site development, and assist in immediate implant placement are introduced. The hypothesis is that the quality of bone is simultaneously enhanced, but controlled clinical studies are needed to prove this theory.

Alternative to the gold standard for alveolar ridge augmentation: tenting screw technology.

Studies have discussed the potential issues associated with the placement of implants in unfavorable locations. Today, it is possible to optimize implant placement despite the significant ridge resorption that often occurs after tooth extraction. This objective is achievable because techniques exist to augment resorbed alveolar ridges to prerequisite widths and heights for proper implant position. A group of surgical procedures have evolved that are considered to be the gold standard for achieving alveolar ridge width and height augmentation. This article discusses the purported gold standard procedure of onlay block grafts for ridge augmentation and contrasts those grafts with the equally successful, more time- and cost-effective tenting screw technology, in conjunction with guided bone regeneration, which has less morbidity and involves only one surgical site. Three cases are presented to illustrate the utilization and effectiveness of tenting screw technology.