Cancer-targeting siRNA delivery from porous silicon nanoparticles.

AIMS: Porous silicon nanoparticles (pSiNPs) with tunable pore size are biocompatible and biodegradable, suggesting that they are suitable biomaterials as vehicles for drug delivery. Loading of small interfering RNA (siRNA) into the pores of pSiNPs can protect siRNA from degradation as well as improve the cellular uptake. We aimed to deliver MRP1 siRNA loaded into pSiNPs to glioblastoma cells, and to demonstrate downregulation of MRP1 at the mRNA and protein levels. METHODS: 50-220 nm pSiNPs with an average pore size of 26 nm were prepared, followed by electrostatic adsorption of siRNA into pores. Oligonucleotide loading and release profiles were investigated; MRP1 mRNA and protein expression, cell viability and cell apoptosis were studied. RESULTS: Approximately 7.7 µg of siRNA was loaded per mg of pSiNPs. Cells readily took up nanoparticles after 30 min incubation. siRNA-loaded pSiNPs were able to effectively downregulate target mRNA (~40%) and protein expression (31%), and induced cell apoptosis and necrosis (33%). CONCLUSION: siRNA loaded pSiNPs downregulated mRNA and protein expression and induced cell death. This novel siRNA delivery system may pave the way towards developing more effective tumor therapies.

Nanoporous alumina-based interferometric transducers ennobled.

A high fidelity interferometric transducer is designed based on platinum-coated nanoporous alumina films. The ultrathin metal coating significantly improves fidelity of the interferometric fringe patterns in aqueous solution and increases the signal-to-noise ratio. The performance of this transducer is tested with respect to refractive index unit (RIU) sensitivity measured as a change in effective optical thickness (EOT) in response to a solvent change and compared to porous silicon based transducers. RIU sensitivity in the order of 55% is attainable for porous alumina providing excellent signal-to-noise ratio, which exceeds the sensitivity of current interferometric transducers. Finally, as a proof-of-principle, we demonstrate biosensing with two distinct immunoglobulin antibodies.

Porous silicon biosensors on the advance.

Biosensor research is a rapidly expanding field with an immense market potential spanning a broad spectrum of applications including biomedical diagnostics, environmental monitoring, veterinary and food quality control. Porous silicon (pSi) is a nanostructured material poised to take centre stage in the biosensor development effort. This can be ascribed to the ease and speed of fabrication, remarkable optical and morphological properties of the material (including tuneable pore size and porosity), large internal surface area and the versatile surface chemistry. The past decade has, therefore, seen diverse proof-of-principle studies involving pSi-based optical and electrochemical transducers, which are highlighted here. We also provide comparative analysis of transducer sensitivity, robustness and susceptibility to interferences and cover strategies for sensitivity enhancement by means of signal amplification.

Self-assembly of electro-active protein architectures on electrodes for the construction of biomimetic signal chains.

The layer-by-layer adsorption technique based on the consecutive deposition of oppositely charged species is suitable for the preparation of protein multilayers with fully electro-active protein molecules. The methodology was established with cytochrome c and the polyelectrolyte sulfonated polyaniline (PASA). The technique is also useful for the construction of bi-protein architectures confining protein-protein communication to an electrode. Following natural examples of protein complexes with defined signal transfer, cytochrome c was arranged with enzymes such as xanthine oxidase, bilirubin oxidase, laccase, and sulfite oxidase in self-assembled multilayer architectures. Thus, biomimetic signal chains from the enzyme substrate via the enzyme and cytochrome c towards the electrode can be established. Communication between proteins immobilised in multiple layers on the electrode can be achieved by in situ generation of small shuttle molecules or more advantageously by direct interprotein electron transfer. This allows the construction of new sensing electrodes, the properties of which can be tuned by the number of deposited protein layers. The mechanism of electron transfer within such protein assemblies on gold electrodes will be discussed.

Electrocatalytic sulfite biosensor with human sulfite oxidase co-immobilized with cytochrome c in a polyelectrolyte-containing multilayer.

An efficient electrocatalytic biosensor for sulfite detection was developed by co-immobilizing sulfite oxidase and cytochrome c with polyaniline sulfonic acid in a layer-by-layer assembly. QCM, UV-Vis spectroscopy and cyclic voltammetry revealed increasing loading of electrochemically active protein with the formation of multilayers. The sensor operates reagentless at low working potential. A catalytic oxidation current was detected in the presence of sulfite at the modified gold electrode, polarized at +0.1 V (vs. Ag/AgCl 1 M KCl). The stability of the biosensor performance was characterized and optimized. A 17-bilayer electrode has a linear range between 1 and 60 microM sulfite with a sensitivity of 2.19 mA M(-1) sulfite and a response time of 2 min. The electrode retained a stable response for 3 days with a serial reproducibility of 3.8% and lost 20% of sensitivity after 5 days of operation. It is possible to store the sensor in a dry state for more than 2 months. The multilayer electrode was used for determination of sulfite in unspiked and spiked samples of red and white wine. The recovery and the specificity of the signals were evaluated for each sample.

Self-assembly of S-layer-enveloped cytochrome c polyelectrolyte multilayers.

We report a study of the electrostatic layer-by-layer self-assembly of electroactive polyelectrolyte multilayers incorporating the redox protein cytochrome c (cyt c) combined with recrystallization of the bacterial cell wall surface layer from Bacillus sphaericus CCM 2177 SbpA (S-layer). The polyelectrolyte multilayer assembly was prepared on flat gold electrodes with a nanometer-scale roughness that allowed monitoring of the film formation throughout all the assembly stages by atomic force microscopy measurements in liquid with respect to topography and forces. The deposition of alternating layers of sulfonated polyaniline and cyt c was carried out by adsorption from the corresponding solutions on a cyt c monolayer electrode. The electroactivity of cyt c within the assembly was confirmed by cyclic voltammetry. We showed that the surface properties of the electrode terminating layer change after each adsorption step accordingly. We also found that S-layer recrystallization on the top of the multilayer film was feasible while electroactivity of cyt c within a polyelectrolyte matrix was partially maintained. This approach offers a new strategy to design a biocompatible and permselective outer envelope of a polyelectrolyte multilayer, promising sensor applications.

Electrocatalytically functional multilayer assembly of sulfite oxidase and cytochrome c.

An electrocatalytically functional multilayer has been designed using two proteins, cytochrome c and sulfite oxidase, and a polyelectrolyte (polyaniline sulfonate). The two proteins were co-immobilized on the surface of a gold electrode in alternating layers by electrostatic interactions using the layer-by-layer technique. The formation of this fully electro-active multilayer is characterized by quartz crystal microbalance and electrochemical experiments. The electro-catalytic characterization of the device containing up to 12 layers is based on generation of an oxidation current after sulfite addition. Besides the electron-transfer mechanism, the role of the different components in the electron-transport chain is clarified. Kinetic data were extracted to characterize the multilayer function. This artificial multilayer assembly is expected to be useful in the biosensor and biofuel cell development.

Electron transfer in SAM/cytochrome/polyelectrolyte hybrid systems on electrodes: a time-resolved surface-enhanced resonance Raman study.

Silver electrodes were covered with mixed self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid (MUA) and 11-mercaptoundecanol (MU) and subsequently coated with alternating layers of cytochrome c (Cyt) and poly(anilinesulfonic acid) (PASA). The immobilized protein is electroactive and retains its native structure. Compared to the case of systems on gold electrodes, the stability of the assembly was found to be decreased. The redox process of Cyt is accompanied by reversible oxidation-reduction of PASA as revealed by the comparative surface-enhanced resonance Raman (SERR) analysis of assemblies including Cyt and the redox-inactive apo-cytochrome c. Time-resolved SERR experiments show a fast electron exchange between the protein and the polyelectrolyte that may play a supporting role in the electric communication of thicker multilayer assemblies employed as sensors.